generic: 6.1: backport patch fixing kernel panic with mcast packets
Backport patch fixing kernel panic with mcast packets, patch is already
scheduled to be backported to stable kernels and will be dropped once
new stable kernel version are released.
Fixes: #14554 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tobias Schramm [Mon, 25 Dec 2023 17:07:39 +0000 (18:07 +0100)]
realtek: enable in-band configuration of SFP port on ZyXEL XGS1250-12
The rtl93xx SoC supports both 1000Base-X and 10GBase-CR on its SerDes
interfaces. Enable dynamic switching between mac-signaled modes to
support 1000Base-X and 10GBase-CR on the SFP port.
Tobias Schramm [Sun, 4 Feb 2024 15:28:07 +0000 (16:28 +0100)]
realtek: 5.15: rtl93xx: add 1000Base-X and 10GBase-CR support on SerDes
This patch adds support for 1000Base-X and 10GBase-CR directly on the
SerDes lanes of rtl93xx SoCs.
This fixes SFP/SFP+ support on devices like the XSG1250-12.
Yuu Toriyama [Sat, 3 Feb 2024 19:09:14 +0000 (04:09 +0900)]
wireless-regdb: update to 2024.01.23
The maintainer and repository of wireless-regdb has changed.
https://lore.kernel.org/all/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/
Changes: 37dcea0 wireless-regdb: Update keys and maintainer information 9e0aee6 wireless-regdb: Makefile: Reproducible signatures 8c784a1 wireless-regdb: Update regulatory rules for China (CN) 149c709 wireless-regdb: Update regulatory rules for Japan (JP) for December 2023 bd69898 wireless-regdb: Update regulatory rules for Singapore (SG) for September 2023 d695bf2 wireless-regdb: Update and disable 5470-5730MHz band according to TPC requirement for Singapore (SG) 4541300 wireless-regdb: update regulatory database based on preceding changes
Stijn Segers [Sun, 4 Feb 2024 12:20:32 +0000 (13:20 +0100)]
realtek: fix zyxel-vers usage for XGS1250-12
Commit daefc646e6d4 ("realtek: fix ZyXEL initramfs image generation")
fixed a shell expansion issue with zyxel-vers usage. Commit 045baca10b15
("realtek: deduplicate GS1900 recipes") took care of this for the
rtl838x and rtl839x subtargets, but the single device officially
supported in rtl930x - the XGS1250-12 - was overlooked. This commit
updates the XGS1250-12 build recipe as well.
generic: 6.1: add patch fixing bugs with LED netdev trigger
Backport one patch merged upstream that prevent a deadlock for LED
netdev trigger and add a pending patch that fix kernel panic on
interface rename trigger notification with invalid dev.
Fixes: #14477 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tim Harvey [Thu, 18 Jan 2024 19:19:30 +0000 (11:19 -0800)]
kernel: modules: video: fix video-core for 6.1
Linux 6.1 wraps core video drivers in a MEDIA_PLATFORM_DRIVERS submenu.
Enable that for 6.1 and add some new necessary undefines to
target/linux/generic/config-6.1 to avoid build failures.
Daniel Kestrel [Wed, 3 May 2023 13:05:49 +0000 (15:05 +0200)]
lantiq: add support for AVM Fritzbox 3490
This adds support for the Fritzbox 3490 device. It contains two
SoCs, one Lantiq with a 5GHz WiFi and one QCA9558 with 2.4GHz
and 5 GHz WiFi. Only the Lantiq has access to the flash memory,
the Atheros runs fully from RAM and is booted by using a remoteproc
kernel module which is not supported with this commit.
The devices were manufactured with varying NAND chips which
requires Micron and non-Micron versions of the images.
Specifications:
- SoC: Lantiq 500 MHz
- RAM: 256 MB
- Storage: 512 MB NAND, 1MB FLASH
- Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet):
· Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n
· Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac
· AG71xx ethernet
- Ethernet: Built-in AR 803x, 7 port 4 phy switch,
4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC
- Renesas µPD720202 USB3 PCIe, requires firmware binary on the device
- VDSL2 modem
- Without telephony or ISDN
Installation:
Check which NAND the device has by using the following procedure with
stock firmware:
Go to to http://<fritzbox_ip>/support.lua, download the support data
file and search for string "NAND device" to get the manufacturer kernel
output.
Use Micron image if Micron is displayed otherwise the non-Micron image.
Use the eva_ramboot.py script to boot the initramfs image. Follow the
procedure to interrupt booting by ftp into 192.168.178.1 within
5 seconds after poweron.
Then transfer the sysupgrade image to the device and run sysupgrade to
flash it to the NAND.
For making USB work, an renesas xhci firmware file (e.g. v2026) is
needed and it should be copied to /lib/firmware/ (file name
renesas_usb_fw.mem).
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
Daniel Kestrel [Mon, 14 Feb 2022 20:55:19 +0000 (21:55 +0100)]
lantiq: add support for AVM Fritzbox 5490/5491
This adds support for the Fritzbox 5490/5491 devices. They contain
two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz
and 5 GHz WiFi. Only the Lantiq has access to the flash memory,
the Atheros runs fully from RAM and is booted by using a remoteproc
kernel module which is not supported with this commit.
Both devices have fiber WAN ports.
The devices were manufactured with varying NAND chips which
requires Micron and non-Micron versions of the images.
Specifications:
- SoC: Lantiq 500 MHz
- RAM: 256 MB
- Storage: 512 MB NAND, 1MB FLASH
- Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet):
· Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n
· Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac
· AG71xx ethernet
- Ethernet: Built-in AR 803x, 7 port Lantiq gswip switch,
4x 1000/100/10 port (additional qca8334 switch for 2 ports), Port 5 is
fixed and connected to the Wireless SOC
- Renesas µPD720202 USB3 PCIe, requires firmware binary on the device
- AT 8033 based AON fiber port (5490) or GPON fiber port (5491)
Unsupported:
- DECT and ISDN telephony
- Two ethernet ports (on extra switch) and fiber port not working
Installation:
Check which NAND the device has by using the following procedure with
stock firmware:
Go to to http://<fritzbox_ip>/support.lua, download the support data
file and search for string "NAND device" to get the manufacturer kernel
output.
Use Micron image if Micron is displayed otherwise the non-Micron image.
Use the eva_ramboot.py script to boot the initramfs image. Follow the
procedure to interrupt booting by ftp into 192.168.178.1 within
5 seconds after poweron.
Then transfer the sysupgrade image to the device and run sysupgrade to
flash it to the NAND.
For making USB work, an renesas xhci firmware file (e.g. v2026) is
needed and it should be copied to /lib/firmware/ (file name
renesas_usb_fw.mem).
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
Daniel Kestrel [Mon, 14 Feb 2022 20:50:06 +0000 (21:50 +0100)]
lantiq: add support for AVM Fritzbox 7490
This adds support for the Fritzbox 7490 device. It contains two
SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz
and 5 GHz WiFi. Only the Lantiq has access to the flash memory,
the Atheros runs fully from RAM and is booted by using a remoteproc
kernel module and is not supported with this commit.
The devices were manufactured with varying NAND chips which
requires Micron and non-Micron versions of the images.
Specifications:
- SoC: Lantiq 500 MHz
- RAM: 256 MB
- Storage: 512 MB NAND, 1MB FLASH
- Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet):
· Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n
· Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac
· AG71xx ethernet
- Ethernet: Built-in AR 803x, 7 port 4 phy switch,
4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC
- Renesas µPD720202 USB3 PCIe, requires firmware binary on the device
- VDSL2 modem
Unsupported:
- DECT and ISDN telephony
Installation:
Check which NAND the device has by using the following procedure with
stock firmware:
Go to to http://<fritzbox_ip>/support.lua, download the support data
file and search for string "NAND device" to get the manufacturer kernel
output.
Use Micron image if Micron is displayed otherwise the non-Micron image.
Use the eva_ramboot.py script to boot the initramfs image. Follow the
procedure to interrupt booting by ftp into 192.168.178.1 within
5 seconds after poweron.
Then transfer the sysupgrade image to the device and run sysupgrade to
flash it to the NAND.
For making USB work, an renesas xhci firmware file (e.g. v2026) is
needed and it should be copied to /lib/firmware/ (file name
renesas_usb_fw.mem).
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
Daniel Kestrel [Mon, 14 Feb 2022 20:39:39 +0000 (21:39 +0100)]
lantiq: add pcie endianess switch for slave devices
The Fritzbox 3490, 5490 and 7490 devices have a Renesas µPD720202
USB3 PCIe device, which requires an endian switch for PCIe slave
devices. The flag and setting is not implemented in the available
patches. Since adding this setting would break other devices,
a DTB setting lantiq,switch-pcie-endianess is added for selective
enablement.
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
Commit 997acc7f86ca ("generic: 6.1: backport at803x split patches")
didn't enable back QCA808x PHY driver after the introduction of the
at803x driver split.
Gain SSH access:
1. Login into web interface (http://apipaddress/computer/login.html),
and download the
configuration(http://apipaddress/computer/config.html).
2. Rename downloaded backup config - 'backup.file to backup.tar.gz',
Enter 'fakeroot' command then decompress the configuration:
tar -zxf backup.tar.gz
3. Edit 'etc/shadow', update (remove) root password:
With password =
'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::'
'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::'
to
Without password =
'root::0:99999:7:::'
'root::0:99999:7:::'
4. Repack 'etc' directory back to a new backup file:
tar -zcf backup-ssh.tar.gz etc/
5. Rename new config tar.gz file to 'backup-ssh.file'
Exit fakeroot - 'exit'
6. Upload new configuration via web interface, now you
can SSH with the following:
Jan Fuchs [Thu, 25 Jan 2024 10:29:21 +0000 (11:29 +0100)]
ath79: add WWAN serial driver and qmi for GL.iNET GL-E750 (Mudi)
The driver for the cellular modems serial interface and qmi was missing
from the default device packages. The driver is required to interact
with the modem using AT commands.
Ivan Pavlov [Fri, 2 Feb 2024 05:46:52 +0000 (08:46 +0300)]
openssl: update to 3.0.13
Major changes between OpenSSL 3.0.12 and OpenSSL 3.0.13 [30 Jan 2024]
* Fixed PKCS12 Decoding crashes
([CVE-2024-0727])
* Fixed Excessive time spent checking invalid RSA public keys
([CVE-2023-6237])
* Fixed POLY1305 MAC implementation corrupting vector registers on PowerPC
CPUs which support PowerISA 2.07
([CVE-2023-6129])
* Fix excessive time spent in DH check / generation with large Q parameter
value ([CVE-2023-5678])
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
Backport PHY package MMD patch merged upstream that add support for
writing MMD regs for the PHY package and support for writing to PHY
package at an offset.
All affected patches automatically refreshed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Shiji Yang [Thu, 1 Feb 2024 11:39:51 +0000 (19:39 +0800)]
ath79: convert ath10k calibration data to NVMEM (ASCII MAC)
This patch converts ath10k calibration data to NVMEM format for
wave 1 devices with mtd ASCII MAC address. The "calibration"
NVMEM cell size is 0x844. All unportable MAC address settings
have been moved to '10_fix_wifi_mac' scripts.
Shiji Yang [Thu, 1 Feb 2024 11:39:51 +0000 (19:39 +0800)]
ath79: convert ath10k calibration data to NVMEM (binary MAC)
This patch converts ath10k calibration data to NVMEM format for
wave 1 devices with mtd binary MAC address. The "calibration"
NVMEM cell size is 0x844. The MAC addresses are assigned via dts.
Shiji Yang [Thu, 1 Feb 2024 11:39:51 +0000 (19:39 +0800)]
ath79: convert ath10k pre-calibration data to NVMEM (ASCII MAC)
This patch converts ath10k pre-calibration data to NVMEM format for
wave 2 devices with mtd ASCII MAC address. The "pre-calibration"
NVMEM cell size is 0x2f20. All unportable MAC address settings have
been moved to '10_fix_wifi_mac' scripts.
Shiji Yang [Thu, 1 Feb 2024 11:39:51 +0000 (19:39 +0800)]
ath79: convert ath10k pre-calibration data to NVMEM (binary MAC)
This patch converts ath10k pre-calibration data to NVMEM format for
wave 2 devices with mtd binary MAC address. The "pre-calibration"
NVMEM cell size is 0x2f20. The MAC addresses are assigned via dts.
Shiji Yang [Thu, 1 Feb 2024 11:39:51 +0000 (19:39 +0800)]
ath79: convert ath10k pre-calibration data to NVMEM (built-in MAC)
This patch converts ath10k pre-calibration data to NVMEM format for
wave 2 devices with built-in MAC address. The "pre-calibration"
NVMEM cell size is 0x2f20.
Shiji Yang [Thu, 1 Feb 2024 11:39:51 +0000 (19:39 +0800)]
ath79: add back board-2.bin to COMFAST devices
The ath10k driver will load both pre-calibration data and board-2.bin
if board-2.bin exists. So it's not necessary to remove it. And this
change won't increase jffs2 image size.
Chukun Pan [Sun, 19 Nov 2023 15:16:26 +0000 (23:16 +0800)]
kernel: modules: move gpio modules to gpio menu
Since we have the 'GPIO support' menu, it is strange to look up
gpio related modules in 'Other modules' menu. So move these
modules and put them in the gpio menu.
According to Raspberry Pi documentation, the RPi 5 First Stage Bootloader
loads the linux kernel instead of loading the Second Stage Bootloader
(start.elf):
https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#differences-on-raspberry-pi-5
Daniel Golle [Wed, 24 Jan 2024 05:01:43 +0000 (05:01 +0000)]
mediatek: fixes for Ethernet on MT7988 SoC
* fix switch ports with modes other than 1000M/Full
* set 32-bit dma_coherent_mask to get PPE to work with 4 GiB of RAM
* sync driver for built-in 1GE PHY with MediaTek SDK sources
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 25 Jan 2024 03:06:45 +0000 (03:06 +0000)]
base-files: upgrade: nand.sh: mute umount error
Send error output of umount to /dev/null to mute error in case
ubiblock device has already been unmounted (which is usually the
case).
Gets rid of bogus error message:
umount: can't unmount /dev/ubiblock0_4: Invalid argument
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 2 Nov 2023 15:39:49 +0000 (15:39 +0000)]
uhttpd: restart when interface to listen becomes available
Currently uhttpd won't start with a listening interface configured if
the interface isn't already up at the time uhttpd starts. Make sure we
attempt to start uhttpd when it comes up.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Mon, 29 Jan 2024 19:04:27 +0000 (20:04 +0100)]
libbsd: update to 0.11.8
Changelog: edddd80 Release libbsd 0.11.8 dd0bdb5 test: Close all descriptors before initializing them for closefrom() 0813f37 build: Check out-of-tree builds in CI df116b5 Adjust strlcpy() and strlcat() per glibc adoption ecb44e1 Do not add a pointer to the NULL constant 459b7f7 Do not confuse code analyzers with out-of-bounds array access look alike a44f885 test: Fix short-lived memory leak 3f5ca0a build: Add a coverage regex to the CI job 9d3e59a man: Use VARIANTS instead of ALTERNATIVES in libbsd(7) f02562d man: Markup function references with Xr instead of Fn b7367c9 build: Add missing dash to macro title bar 6777eb6 pwcache: Do not declare uidtb and gidtb when not used d4e0cdc fgetln: Include <stdio.h> after <sys/*> f41d6c1 build: Refactor GNU .init_array support check into a new m4 function 30b48ed build: Refactor linker script detection into a new m4 function d0d8d01 build: Do not provide prototypes for arc4random() on Solaris cf61ebb build: Do not build the progname module if it is not needed 73b25a8 build: Sort entries alphabetically 5434ba1 build: Conditionalize wcslcpy() and wcslcat() functions on macOS dc1bd1a build: Conditionalize only id-from-name functions not the entire pwcache edc746e build: Conditionalize getprogname()/setprogname on macOS 8f998d1 progname: Include <procinfo.h> if available d08163b build: Check whether we need libperfstat on AIX 1186cf8 build: Annotate droppable functions for musl on next SOVERSION bump 6385ccc build: Conditionalize bsd_getopt() on macOS c120681 Move the version script comments before the symbols 9fa0676 Port getprogname() to AIX 92337b1 Make getprogname() porting mandatory 90b7f3a test: Do not use /dev/null as compiler output file 426bf45 build: Add generated *.sym files to .gitignore 21d12b0 build: On macOS do not build functions provided by the system bc65806 build: Select whether to include funopen() in the build system 8b7a4d9 build: Move Windows OS detection to the OS features section ccbfd1c build: Remove __MUSL__ definition from configure e0976d7 build: Add a new libbsd_strong_alias() macro and switch users to it 49c7dd1 build: Only emit link warnings for ELF objects 8622767 build: Use an export symbols file if there is no version script support 8f61036 build: Add -no-undefined libtool flag ae7942b build: Do not override the default DEPENDENCIES for libbsd a5faf17 Only use <stdio_ext.h> if present 06e8a1b Define _NSIG if it is not defined by the system 44824ac Declare environ if the system does not do so 1fb6c3f Use lockf() when flock() is not available fe16f38 test: Use open_memstream() only if available 7c652a9 test: Do not hardcode root:root user and group names ed2eb31 test: Fix closefrom() test on macOS 0f8bcdf test: Fix closefrom() test to handle open file descriptor limits 07192b3 test: Disable blank_stack_side_effects() on non-Hurd systems ca3db5e build: Do not enable ASAN for musl CI pipelines ff46386 man: Add HISTORY section to arc4random(3bsd) 4c6da57 man: Switch arc4random(3bsd) man page from OpenBSD to NetBSD 830dd88 doc: Remove written-by attribution 257800a build: Add support for sanitizer compiler flags 536a7d4 test: Exempt blank_stack_side_effects() from sanitizer checks 7ed5de0 test: Import explicit_bzero() sanitizer support changes from OpenBSD 05a802a test: Fix memory leaks in fpurge test 5962e03 man: Fix BSD and glibc versions 59a21c7 man: Update STANDARDS and HISTORY sections 7b4ebd6 include: Adjust closefrom() per glibc adoption 0dfbe76 build: Switch to debian:latest Docker image dec783d build: Fix version script linker support detection fe21244 include: Use __has_builtin to detect __builtin_offsetof support ec88b7b funopen: Replace off64_t with off_t in funopen_seek() 2337719 man: Prune unneeded <sys/types.h> include in setproctitle(3) 5dea9da build: Improve C99 compatibility of __progname configure check b9bf42d build: Enable -Wall for automake e57c078 build: Add missing AM_PROG_AR macro call to configure.ac 80f1927 build: Fix configure.ac indentation b7a8bc2 build: Require automake 1.11 e508962 build: Do not require funopen() to be ported 00b538f build: Terminate lists in variables with «# EOL» 5cfa39e build: Use «yes» instead of «true» for AC_CHECK_FUNCS cache value
orangepizza [Mon, 29 Jan 2024 02:37:43 +0000 (11:37 +0900)]
mbedtls: security bump to version 2.28.7
This release of Mbed TLS provides bug fixes and minor enhancements. This
release includes fixes for following security issues:
* Timing side channel in private key RSA operations (CVE-2024-23170)
Mbed TLS is vulnerable to a timing side channel in private key RSA
operations. This side channel could be sufficient for an attacker to
recover the plaintext. A local attacker or a remote attacker who is
close to the victim on the network might have precise enough timing
measurements to exploit this. It requires the attacker to send a large
number of messages for decryption.
* Buffer overflow in mbedtls_x509_set_extension() (CVE-2024-23775)
When writing x509 extensions we failed to validate inputs passed in to
mbedtls_x509_set_extension(), which could result in an integer overflow,
causing a zero-length buffer to be allocated to hold the extension. The
extension would then be copied into the buffer, causing a heap buffer
overflow.
bcm27xx-userland is deprecated and bcm27xx-utils should be used instead.
https://github.com/raspberrypi/userland/commit/96a7334ae9d5fc9db7ac92e59852377df63f1848
Switch to qca8081 upstream PHY. Update every device that have LEDs
attached to the qca8081 PHY to follow new way of defining the LEDs and
add original OEM configuration.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Completely disable dump_survey code on ARCH_BCM2835 to fix defined but not
used warning.
https://github.com/openwrt/openwrt/commit/512b762ddbb602b744f0e7a443cf4ac7422155c1?w=1#commitcomment-137899352
projects / thirdparty / openwrt.git / log
