Elbert Mai [Mon, 29 Apr 2024 21:05:27 +0000 (14:05 -0700)]
bcm27xx: correct cmdline.txt consoles for procd
Commit [ca8c30208d5e][1] updates procd to handle muliple "console=" on the
kernel command line. This affects Raspberry Pi builds because cmdline.txt
specifies a UART console and a virtual console on HDMI, in that order.
When procd finds multiple consoles on the command line, it attempts to
open /dev/console. Linux uses the [last console][2] for /dev/console, so
procd opens the virtual console on Raspberry Pi. This completely disables
the UART console and causes [strange behavior][3] on the virtual console.
Prior to ca8c30208d5e, procd would always open the first console, which is
the UART console.
The simplest fix without reverting ca8c30208d5e is to swap the order of
console options in cmdline.txt. By putting the UART console last, procd
handles the serial console correctly as before.
xdp-tools: fix compilation wrongly using host header
Currently it's needed to have gcc-multilib on the host to correctly
compile xdp-tools. This is wrong and means that we are using host header
to compile a tool.
By some searching in how the makefile works it was discovered that
BPF_CFLAGS were not used and required to be appended to config.mk
Only one single header was added but we should include each BPF_CFLAGS
from bpf.mk. To make this some patching to bpf-header were required and
some patches to xdp-tools were required.
Also it's needed to pass the correct target to BPF_CFLAGS.
With the following changes xdp-tools can correctly compile with each
header from bpf-headers and should not use any host header.
Co-Developed-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Andre Heider <a.heider@gmail.com> Link: https://github.com/openwrt/openwrt/pull/11825 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
netlink.h header have NL_SET_ERR_MSG_MOD that is tied to kmods. We don't
need kmods on bpf tools and this cause compilation error if the header
is included. Fix it by dropping NL_SET_ERR_MSG_MOD.
ramips: mt7621-dts: describe switch PHYs and adjust PHY muxing
Currently, the MT7530 DSA subdriver configures the MT7530 switch to provide
direct access to switch PHYs, meaning, the switch PHYs listen on the MDIO
bus the switch listens on. The PHY muxing feature makes use of this.
This is problematic as the PHY may be attached before the switch is
initialised, in which case, the PHY will fail to be attached.
Since commit 91374ba537bd ("net: dsa: mt7530: support OF-based registration
of switch MDIO bus") on mainline Linux, we can describe the switch PHYs on
the MDIO bus of the switch on the device tree.
When the PHY is described this way, the switch will be initialised first,
then the switch MDIO bus will be registered. Only after these steps, the
PHY will be attached.
Describe the switch PHYs on mt7621.dtsi and remove defining the switch PHY
on the SoC's mdio bus node. When the PHY muxing is in use, the interrupts
for the muxed PHY won't work, therefore delete the "interrupts" property on
the devices where the PHY muxing feature is in use.
ramips: mt7621-dts: do not modify ethernet node for MeiG SLT866
Currently, the pinctrl-0 property on the ethernet node is modified to
exclude the rgmii1 and rgmii2 pin groups to be claimed with rgmii1 and
rgmii2 functions, respectively. Remove the modification of this property as
we need these pin groups to be claimed with the said functions for this
device.
There was no config in the uboot-envtools package, so there is no
generated /etc/fw_env.config for the fw_printenv and fw_setenv utils.
Since uboot-envtools 2024.01, there is a way to make these utils work
without /etc/fw_env.config if the DT has an env partition with the prop.:
compatible = "u-boot,env";
So, this commit adds the prop. above to the appsblenv:0 partition
in the yuncore ax880 DTS file.
Robert Marko [Tue, 30 Apr 2024 09:08:46 +0000 (11:08 +0200)]
tools/elfutils: remove dirname
In the 0.191 update dirname was used instead of <libgen.h> to fix the
poisoned basename error:
/usr/include/libgen.h:35:9: error: attempt to use poisoned "basename"
35 | #define basename __xpg_basename
However, doing this has lead to libelf.a pulling in xmalloc, xstrdup and
friends and statically linking them thus leading to a symbol name conflict
with FRR host build and anything else that links against libelf and uses
xmalloc and friends.
Well, it turns out that upstream has added a helper[1] for basename so it
can compile with musl 1.2.5 which dropped the basename declaration, but it
also means that we must NOT include <libgen.h> and that poisoned error is
intentional and added to prevent duplicate basename definitions.
This also means that for macOS we dont need to do any additional header
inclusions as the new helper takes care of basename.
So, to fix the symbol conflict we can simply drop the <dirname.h> inclusion
and build from elfutils.
Ryan Salsbury [Tue, 30 Apr 2024 01:05:14 +0000 (18:05 -0700)]
ipq40xx: fix I2C pin config on Aruba AP-303H
Turn on SoC pull-ups on I2C pins, since there are no discrete pull-up
resistors on the bus.
Increase clock to 400 kHz. Both chips on the bus support 400 kHz. I
tested the ISL28022 at 4,000 reads/sec and didn't see any garbled output
or bus hangs, even with SoC drive strength reduced to 2 for the test.
mDNS broadcast can't accept empty TXT record and would fail
registration.
Current procd_add_mdns_service checks only if the first passed arg is
empty but don't make any verification on the other args permittins
insertion of empty values in TXT record.
Fixes: b0d9dcf84dd0 ("procd: update to latest git HEAD") Reported-by: Paul Donald <newtwen@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15331 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Kazuki H [Fri, 22 Dec 2023 14:58:16 +0000 (23:58 +0900)]
toolchain: glibc: update to glibc 2.38
This updates glibc to version 2.38.
Add --enable-crypt since the crypt function got disabled in 2.38, but we
still need it.
Also add the newly introduced --enable-fortify-source flag and hook it up
to the build system.
Switch to .zst archive while at it.
Signed-off-by: Kazuki H <kazukih0205@gmail.com> Link: https://github.com/openwrt/openwrt/pull/14259
[ switch to .zst and fix mirror HASH ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
qualcommax: ipq60xx: mute warning on bootcount enable compile
ipq60xx bootcount script include /lib/functions that produce warning
when the script is enabled on image compilation. This script is already
included by /etc/rc.common hence it's not needed.
While at it also fix the format of the switch case.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Mon, 29 Apr 2024 10:04:18 +0000 (12:04 +0200)]
arm-trusted-firmware-mvebu: refresh cryptopp hash
Well, it seems that cryptopp hash was never refreshed since calling
make package/boot/arm-trusted-firmware-mvebu/check FIXUP=1 V=s does not
actually refresh the download calls hashes so refresh it manually.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Mon, 29 Apr 2024 09:58:17 +0000 (11:58 +0200)]
arm-trusted-firmware-mvebu: use SOURCE_VERSION instead of VERSION
Since ("download: don't overwrite VERSION variable") trying to download the
required sources for mvebu ATF will fail with:
Makefile:247: *** Download/mox-boot-builder is missing the SOURCE_VERSION field.. Stop.
This also broke the buildbot mvebu/cortex-a53 builds.
So, fix it by switching to SOURCE_VERSION instead.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Paul Spooren [Sun, 17 Mar 2024 17:11:48 +0000 (18:11 +0100)]
apk: add package
APK (Alpine Package Keeper) is the package manager of Alpine Linux and
has multiple advantages over OPKG. While Alpine uses APK version 2, this
commit adds version 3 with a heavily optimised database structure and
additional feature making it suitable for OpenWrt.
This commit will be followed by many more to add APK build capabilities
to the OpenWrt build system, firstly enabling side by side builds of APK
and OPKG packages, later replacing OPKG entirely.
Paul Spooren [Wed, 17 Apr 2024 05:07:41 +0000 (07:07 +0200)]
download: don't overwrite VERSION variable
In package-defaults.mk the VERSION variable contains the final package
version, which is a combination of `PKG_VERSION`, `PKG_RELEASE` and if
used, parameters of `PKG_SOURCE_VERSION`. While this works fine for
building, within the package Makefile the content VERSION varies:
When building a package from a release tarball, the content of VERSION
contains the actual package version, however when building from source
(i.e. Git), the VERSION is overwritten by `PKG_SOURCE_VERSION`.
To fix the overwrite, this commit switches from `VERSION` in download.mk
to `SOURCE_VERSION` which isn't used anywhere else yet.
As a result, Makefiles may pass the package version to be included
inside the binary.
David Bauer [Thu, 25 Apr 2024 14:53:55 +0000 (16:53 +0200)]
mpc85xx: convert WS-AP3710i to simpleImage wrapper
Convert the Enterasys WS-AP3710i access point to use the simpleImage
wrapper.
This is necessary, as the bootlaoder does not align the DTB correctly
(and does not support altering the FDT loadaddress). Booting images with
kernels 5.15 and later can break depending on the alignment on the DTB
within the FIT image.
Marius Dinu [Sun, 31 Mar 2024 11:22:18 +0000 (14:22 +0300)]
libaudit: update to 3.1.4, join with daemon and utils, rename
Changes:
- new URL for sources (old address is dead)
- daemon and utils from packages feed are merged in here
- only build once
- no need to update at the same time in both places
- update to v3.1.4
- removed unneeded patches
- added audisp-syslog
- removed audispd (no longer exists)
- rename and move to package/utils/audit
- update new path in one dependent package
Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
Tony Ambardar [Sat, 20 Apr 2024 02:31:42 +0000 (19:31 -0700)]
kernel/malta: Restore kernel files for v6.1
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Tony Ambardar [Sat, 20 Apr 2024 04:42:53 +0000 (21:42 -0700)]
scripts/kernel_bump: Fix commit text formatting
Text of a commit message body should wrap at 75 characters. Manual commits
are expected to do so, but automated commits *must* do so to avoid adding
repeated ugly commits.
Jean Thomas [Wed, 24 Apr 2024 09:36:26 +0000 (11:36 +0200)]
uqmi: update to git HEAD
e7207be uqmi: print radio interfaces in serving system command 6ef41d6 uqmi: create function to print radio interface string e25d042 uqmi: Add basic 5G NR support 3e782be uqmi: sync data from libqmi project 368d46c uqmi: support C reserved keywords in upstream JSON files 02e42c0 reorganize source code in common and uqmi specific parts 4591f0a .gitignore build/ directories 2b57ee1 uqmi: commands-uim: fix uninitialized use of card_application_state 7c77e77 data/code-gen: add support for indications ddbf864 qmi-struct.h: add missing includes 5320c1d move qmi_get_error_str to into utils.c 1503bc7 dev.c: add missing import strings.h bae945f commands-nas: add missing includes 9ffd0e2 commands: make `struct blob_buf status` public a4fbdcc commands-nas: fix gcc warning 8ff632a dev.c: add comment to qmi_request_wait() a043a74 CMakeLists: refactor SOURCES variable to allow later adding uqmid ebfe8b4 CMakeLists: set no-dangling-pointer c47125d CMakeLists: improve generated files 0f64b69 CMakeLists: update cmake minimum version to 3.5
As the built uqmi binary is now moved to a dedicated directory,
update the Makefile accordingly.
Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Daniel Golle [Sun, 28 Apr 2024 02:03:43 +0000 (03:03 +0100)]
mediatek: bpi-r4: store random MAC addresses for the BPi-R4
Despite coming with multiple I2C EEPROMs supposedly dedicated for that
purpose, the BPi-R4 does not seem to have factory assigned MAC addresses.
Hence, just like for all other BPi boards, store a randomly generated
MAC address on first boot and derive WAN and Wi-Fi MAC addresses from
that as well. Not perfect, but better than random on every boot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hauke Mehrtens [Wed, 8 Nov 2023 23:00:09 +0000 (00:00 +0100)]
mbedtls: Update to version 3.6.0
This adds support for mbedtls 3.6.0.
The 3.6 version is the next LTS version of mbedtls.
This version supports TLS 1.3.
This switches to download using git. The codeload tar file misses some
git submodules.
Add some extra options added in mbedtls 3.6.0.
The size of the compressed ipkg increases:
230933 bin/packages/mips_24kc/base/libmbedtls13_2.28.7-r2_mips_24kc.ipk
300154 bin/packages/mips_24kc/base/libmbedtls14_3.6.0-r1_mips_24kc.ipk
Nick Hainke [Wed, 17 Apr 2024 15:23:47 +0000 (17:23 +0200)]
kernel/zynq: Restore kernel files for v5.15
This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.
See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.
cpe:/a:netfilter:iptables is the correct CPE ID for iptables:
https://nvd.nist.gov/products/cpe/search/results?keyword=cpe:2.3:a:netfilter:iptables
Fixes: c61a2395140d92cdd37d3d6ee43a765427e8e318 (add PKG_CPE_ID ids to package and tools) Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15297 Signed-off-by: Robert Marko <robimarko@gmail.com>
cpe:/a:json-c:json-c is the correct CPE ID for libjson-c:
https://nvd.nist.gov/products/cpe/search/results?keyword=cpe:2.3:a:json-c:json-c
Fixes: c61a2395140d92cdd37d3d6ee43a765427e8e318 (add PKG_CPE_ID ids to package and tools) Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15292 Signed-off-by: Robert Marko <robimarko@gmail.com>
cpe:/a:dropbear_ssh_project:dropbear_ssh is the correct CPE ID for dropbear:
https://nvd.nist.gov/products/cpe/search/results?keyword=cpe:2.3:a:dropbear_ssh_project:dropbear_ssh
Fixes: c61a2395140d92cdd37d3d6ee43a765427e8e318 (add PKG_CPE_ID ids to package and tools) Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15290 Signed-off-by: Robert Marko <robimarko@gmail.com>
cpe:/a:libexpat_project:libexpat is the correct CPE ID for expat:
https://nvd.nist.gov/products/cpe/search/results?keyword=cpe:2.3:a:libexpat:libexpat
Fixes: c61a2395140d92cdd37d3d6ee43a765427e8e318 (add PKG_CPE_ID ids to package and tools) Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15291 Signed-off-by: Robert Marko <robimarko@gmail.com>
Paul Donald [Mon, 22 Apr 2024 13:17:33 +0000 (15:17 +0200)]
lldpd: fix reload bug: advertisements shall default to on
Because these capability advertisements default to on in lldpd, they
became absent at reload, and not restart, due to how the reload logic
works ( keep daemon running, send unconfigured and then the new config
via socket ), and it was not evident unless you happened to be looking
for it (e.g. via pcap or tcpdump). It was also not evident from the
manpage ( have now sent patches upstream ).
At reload time, the unconfigure logic disabled them unless they were
explicitly enabled (compare with other settings where 'unconfigure' just
resets them). Now they default to on/enabled at init time, and are
explicitly 'unconfigure'd at startup if the user disables them via:
cpe:/a:nasm:netwide_assembler is the correct CPE ID for nasm:
https://nvd.nist.gov/products/cpe/search/results?keyword=cpe:2.3:a:nasm:netwide_assembler
Ulrich Stark [Thu, 25 Apr 2024 11:17:53 +0000 (13:17 +0200)]
qualcommax: IPQ807x: ZyXEL NBG7815: Fix random Wifi MAC
For this particualar device we get random MAC's for Wifi on each (re-)boot.
This is because art partition/pre caldata do not contain valid MAC addresses.
As we have now a new/better approach with ath11k_patch_mac we can use it for
this device too.
I'm using this approach for like two weeks and its working flawlessly.
Signed-off-by: Ulrich Stark <pwned-pixel@posteo.de>
qualcommax: IPQ807x: ZyXEL NBG7815: Fix random Wifi MAC
Changing order to 3/phy0/5G-1, 2/phy1/2G, 4/phy2/5G-2.
Signed-off-by: Ulrich Stark <pwned-pixel@posteo.de>
Ryan Salsbury [Sat, 27 Apr 2024 00:27:36 +0000 (17:27 -0700)]
ipq40xx: fix USB on Aruba AP-303H
Enable USB 3.0 controller, disable USB 2.0 controller.
The USB 2.0 port on the AP-303H is actually connected to the USB 3.0
controller's HS phy. Enable the HS phy only, since the SS lanes are not
brought out to the connector.
Daniel Golle [Sat, 27 Apr 2024 02:19:03 +0000 (03:19 +0100)]
generic: 6.1, 6.6: remove patch which breaks WAN on MT7621
Importing pending patch "net: dsa: mt7530: move MT753X_MTRAP operations
for MT7530" broke WAN connectivity on most MT7621 which use PHY-muxing
to hook up either port 0 or port 4 to GMAC1.
Remove it for now until the author submits a fixed version.
The backports introduced in commit d40756563c46 ("kernel: backport
phylink changes from mainline Linux") broke the mv88e6xxx DSA driver.
A backport to fix this was added to the kirkwood target, but as it is
used in multiple targets, and there's a kmod package for it, the fix
should be in generic backports.
This fixes the switch on the WatchGuard Firebox M300 when running the
6.1 testing kernel.
There is no need to backport the fix for the 6.6 kernel, as it was
included in 6.6.5.
Building perf's intel-pt-decoder fails on both PPC32 and PPC64:
/home/stijn/Development/OpenWrt/openwrt/staging_dir/toolchain-powerpc64_e5500_gcc-13.2.0_musl/lib/gcc/powerpc64-openwrt-linux-musl/13.2.0/../../../../powerpc64-openwrt-linux-musl/bin/ld.bfd:
/home/stijn/Development/OpenWrt/openwrt/build_dir/target-powerpc64_e5500_musl/linux-qoriq_generic/linux-6.1.86/tools/
perf-target-powerpc64_e5500_musl/perf-in.o: in function `insn_set_byte':
/home/stijn/Development/OpenWrt/openwrt/build_dir/target-powerpc64_e5500_musl/linux-qoriq_generic/linux-6.1.86/tools/perf/util/intel-pt-decoder/../../../arch/x86/include/asm/insn.h:64:
undefined reference to `__le32_to_cpu'
Add NO_AUXTRACE=1 to MAKE_FLAGS for LINUX_KARCH powerpc, which disables
build of intel-pt-decoder on both PPC32 and PPC64.
fab9e29f6b92 ipq6018: update regdb in TPLink EAP610-Outdoor BDF 6d02b65fadf3 ipq8074: update RegDB in new submitted BDF 644ba9ea2e66 ipq6018: update RegDB in new submitted BDF
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Felix Fietkau [Tue, 23 Apr 2024 10:37:05 +0000 (12:37 +0200)]
kernel: improve GRO performance
For packets not belonging to a local socket, use fraglist GRO instead of
regular GRO. This make segmenting packets very cheap and avoids the need for
selectively disabling GRO
Michael Pratt [Mon, 8 Apr 2024 19:15:31 +0000 (15:15 -0400)]
tools/elfutils: refresh portability patch for macOS
Quilt refresh combined two sets of changes to the same file.
The switch from using libgen.h to dirname.h because of function poisoning
from gnulib's import of basename() was added as a new patch hunk instead
of an edit to the original one.
The original patch hunk was to fix build errors on an earlier version of
elfutils before the "dirname" module was being imported to fix further
build errors with the 0.191 version.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # MacOS Signed-off-by: Michael Pratt <mcpratt@pm.me> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Michael Pratt [Mon, 8 Apr 2024 07:54:13 +0000 (03:54 -0400)]
tools/elfutils: remove no-op copy of tdestroy()
A false tdestroy() function was added in order to make elfutils build on
macOS again. A previous commit added declarations for a real version of
tdestroy() into gnulib, which is already imported, as well as the
preprocessor flags and the triggers for the Makefile.am conditional in
order to include the source to be built.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # MacOS Signed-off-by: Michael Pratt <mcpratt@pm.me> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Michael Pratt [Mon, 8 Apr 2024 03:28:51 +0000 (23:28 -0400)]
tools/elfutils: use locally declared static reallocarray()
On macOS, stdlib.h in the standard include paths does not provide
reallocarray() while both elfutils and gnulib do, however they are
declared differently, leading to an error:
A normal "configure && make" build cycle results in both declarations
being enabled as a result of both elfutils and gnulib having completely
separate configure checks where gnulib uses an internal placeholder symbol
HAVE_REALLOCARRAY, and elfutils uses a standard autoconf macro
HAVE_DECL_REALLOCARRAY.
Fix this by excluding the import of the reallocarray module which causes
gnulib checks in the configure stage to not even consider whether to
declare reallocarray later on, so the decision is only between the
standard include stdlib.h and the elfutils header.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # MacOS Signed-off-by: Michael Pratt <mcpratt@pm.me> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
projects / thirdparty / openwrt.git / log
