INAGAKI Hiroshi [Sat, 10 May 2025 07:33:04 +0000 (16:33 +0900)]
qualcommax: ipq50xx: fix NAND ECC for ELECOM WRC-X3000GS2
Specify 4-bit ECC strength instead of 8-bit, to resolve NAND I/O errors
on ELECOM WRC-X3000GS2.
ELECOM WRC-X3000GS2 has a Macronix MX35UF1G24AD SPI-NAND chip as a flash
storage. That chip is registered as a chip that has 128 bytes OOB and
requires 8-bit ECC, and described as the same in the Macronix's datasheet.
But on WRC-X3000GS2, 8-bit ECC breaks NAND I/O on mtdblock devices with
the following errors and 4-bit ECC needs to be used to resolve this issue.
current (ECC strength=8):
```
[ 1.401566] 0x000000480000-0x000000500000 : "0:appsblenv"
[ 1.407128] 1 fixed-partitions partitions found on MTD device 0:appsblenv
[ 1.410663] Creating 1 MTD partitions on "0:appsblenv":
[ 1.417359] 0x000000000000-0x000000040000 : "env-data"
[ 1.479865] u-boot-env-layout: probe of 79b0000.qpic-nand:flash@0:partitions:partition-0-appsblenv:partition@0:nvmem-layout failed with error -74
root@OpenWrt:~# strings /dev/mtdblock10
[ 55.693754] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
[ 55.694660] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[ 55.703147] I/O error, dev mtdblock10, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[ 55.711884] I/O error, dev mtdblock10, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[ 55.720778] I/O error, dev mtdblock10, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 55.730310] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 55.738607] Buffer I/O error on dev mtdblock10, logical block 0, async page read
```
after fixing (ECC strength=4):
```
[ 1.402301] 0x000000480000-0x000000500000 : "0:appsblenv"
[ 1.407909] 1 fixed-partitions partitions found on MTD device 0:appsblenv
[ 1.411370] Creating 1 MTD partitions on "0:appsblenv":
[ 1.418075] 0x000000000000-0x000000040000 : "env-data"
(no error)
root@OpenWrt:~# strings /dev/mtdblock10
[ 39.131008] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
bootcmd=bootipq
baudrate=115200
wifi2=7C:F8:54:01:BD:F3
CRASH_COUNT=0
...
```
Fixes: 01b72ce61e ("qualcommax: ipq50xx: remove ECC user config from board files") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18770 Signed-off-by: Robert Marko <robimarko@gmail.com>
kmod-drm-rp1-dsi, kmod-drm-rp1-dpi and kmod-drm-rp1-vec should depend on
kmod-drm-dma-helper and kmod-drm-vram-helper in order to fix dependency errors
when all kernel modules are selected.
Shiji Yang [Fri, 9 May 2025 14:12:11 +0000 (22:12 +0800)]
realtek rtl931x: mark subtarget as source-only
There are no supported devices on this sub-target. It can be
considered that it is still under development. Therefore,
there is no need to make the buildbot build it every day.
Shiji Yang [Thu, 8 May 2025 11:23:14 +0000 (19:23 +0800)]
ramips: rt288x: mark subtarget as source-only
Due to RAM/ROM size limitations, this sub-target has been unable
to generate usable images for a long time. Mark them as source-only
to save some resource for the buildbot.
Shiji Yang [Thu, 8 May 2025 11:22:48 +0000 (19:22 +0800)]
lantig: xway_legacy: mark subtarget as source-only
Due to RAM/ROM size limitations, this sub-target has been unable
to generate usable images for a long time. Mark them as source-only
to save some resource for the buildbot.
Shiji Yang [Thu, 8 May 2025 11:22:16 +0000 (19:22 +0800)]
lantig: ase: mark subtarget as source-only
Due to RAM/ROM size limitations, this sub-target has been unable
to generate usable images for a long time. Mark them as source-only
to save some resource for the buildbot.
Eric Fahlgren [Thu, 8 May 2025 22:28:52 +0000 (15:28 -0700)]
imagebuilder: exclude metadata for profiles that have no kernel
Device profiles that specify 'DEFAULT := n' are being included
in the imagebuilder metadata, specifically in .profiles.mk, even
though there is no kernel built for the device. This results in
'make info' showing the device as valid, but then 'make image
PROFILE=xxx' failing with 'No rule to make target xxx-kernel.bin ...'
We exclude these profiles from the imagebuilder, avoiding these
errors.
Fixes: https://github.com/openwrt/openwrt/issues/18410 Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18748 Signed-off-by: Robert Marko <robimarko@gmail.com>
The RTL8214FC currently uses generic PHY functions. That makes it look like a copper
device. Switching to/from fibre works fortunately but the autonegotiation handling
still works on MII_LPA (PHY register 5) as if a copper link is used. Fix that by
- advertising a superset of TP/FIBRE features
- using clause 37 functions when on fibre
Additionally enhance the code of the driver to assist further development.
- log the speed of the inserted module to detect wrongly inserted 10gbase-r modules
- order phy driver functions alphabetically (keep match/name on top)
- remove genphy_loopback as the kernel uses it if not provided
Remark! The driver internally uses PORT_MII for the TP port. Align with that and
report MII to ethtool instead of TP. Other drivers do the same and it can be
changed in the future if needed.
Daniel Golle [Fri, 9 May 2025 02:46:29 +0000 (03:46 +0100)]
kernel: modules: fs: add missing backslash
Commit 7db0748b7b ("kernel: modules: split package fs-fscache") modified
the KCONFIG section of KernelPackage/fs-netfs but missed to add a
backslash to escape a linebreak. Add it now.
mediatek: filogic: increase spi flash memory speed on ZyXEL EX5601
Reduces boot time by 3s on a freshly installed image. This device
has a large flash and the gain can be higher with more packages
installed. According to the datasheet, this is the maximum frequency
supported by the Micron and Macronix chips that are installed in
these devices. Tested on three units over a two month period.
Before:
$ dd if=/dev/mtd5 of=/dev/null bs=10M count=1 status=progress
1+0 records in
1+0 records out 10485760 bytes (10 MB, 10 MiB) copied, 1.51901 s, 6.9 MB/s
After:
$ dd if=/dev/mtd5 of=/dev/null bs=10M count=1 status=progress
1+0 records in
1+0 records out 10485760 bytes (10 MB, 10 MiB) copied, 0.899474 s, 11.7 MB/s
Shiji Yang [Thu, 1 May 2025 03:35:36 +0000 (11:35 +0800)]
kernel: modules: split package fs-fscache
The module kmod-fs-fscache was merged into kmod-fs-netfs since
6.12 LTS kernel[1]. Therefore, we have to split fs-cachefiles
into a separate package. This patch also removed some outdated
config symbols that have already been removed in 5.15 kernel:
Lech Perczak [Sun, 12 Nov 2023 22:55:39 +0000 (23:55 +0100)]
ath79: support Mikrotik RouterBOARD 2011-UiAS-2HnD
Mikrotik RouterBOARD 2011 series are AR9344-based wired routers, with
optional 2,4GHz 802.11n 2x2:2 Wi-Fi radio, with desktop or rack-mount
capability, featuring 5 gigabit Ethernet ports and 5 fast Ethernet
ports. Different variants of the board are supported using a single
image.
Bare-bones RouterBOARD 2011LS is supported using the same image.
Specification:
- Power: 10-28V input via 5,5/2,1 DC barrel jack, or terminal block on
some boards
- CPU: AR9344 at 600 to 750MHz (configurable)
- RAM: 128MB (64MB in early versions) DDR2
- Flash: 128MB (64MB in early versions) NAND flash
- Gigabit Ethernet: 5 ports via AR8327 switch (eth1 to eth5)
- Fast Ethernet: 5 ports via AR9344 built-in switch (eth6 to eth10)
- SFP: single port through AR8327 switch (SGMII at port 6)
- PoE in: passive input up to 28V at eth1
- PoE out: passive output up to 28V at eth10
- USB: optional micro-AB host port or type-A host port
- Console: optional Cisco-style RS232 console at the back of the device,
on budget devices available as 3.3V UART via testpoints
- LCD: 2" touchscreen-equipped LCD (unsupported)
Installation:
- perform TFTP boot of initramfs image as for netinstall procedure
typical for Mikrotik devices
- when initramfs image boots, use sysupgrade to perform final
installation.
If upgrading from ar71xx, clean installation should be performed, as the
devices now uses yafut to handle kernel image.
TODO:
- 64MB NAND variant using K9F1208U0C isn't yet supported, because it
needs disabling subpage write support for that chip. A proper solution
would be to fix that in kernel, but I don't have this variant to test
with currently.
- The same is true for GD9FU1G8F3A NAND, which isn't ONFI compliant and
needs definition in kernel for proper geometry.
- SFP port probes over I²C and gigabit link is possible, but currently
the drivers lack support of handling link status information to
userspace, including swconfig. Link will appear as always up.
Currently, link status logging can detect something, but status both
for ports 0 and 6 is logged simultaneously,
but "swconfig dev switch0 show" will always show link up on port 6.
- Not yet fully known connection to display and touch panel, but some
documentation is available (seemingly connected via SPI, according to
Mikrotik's open source code at [1])
qualcommax: ipq50xx: remove ECC user config from board files
With the spi-qpic-snand driver now supporting reading ECC requirements
from the NAND chip itself, there's no need to set those in the DTS
anymore avoiding issues with devices of the same revision using
different NAND types with varying ECC requirements.
spi: spi-qpic-snand: update driver with latest patches from upstream
Updating the spi-qpic-snand driver with the latest patches sent
upstream and remove custom patches.
These patches add error handling fixes, use of right read location in
read ops, removal of unused variable, ability to read user config and
nand chip requirements, and support for 8bits ECC strength.
Tested on: Gl.iNet GL-B3000 & Linksys MR5500, MX2000, MX5500, SPNMX56
Henry Tung [Sun, 4 May 2025 18:29:54 +0000 (11:29 -0700)]
mac80211: ath11k: fix broadcast failures during GTK rekeying
Revert key_cipher change to NONE when clearing key.
Setting to NONE triggers asserts in the firmware and causes broadcast
drops with ath11k firmware 2.9.0.1, so until a future blob
fixes this, revert this as a workaround.
Imported from
https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/blob/win.wlan_host_opensource.3.0.r24/patches/ath11k/350-ath11k-Revert-clear-the-keys-properly-when-DISABLE_K.patch
Linus Lüssing [Wed, 7 May 2025 00:50:11 +0000 (02:50 +0200)]
realtek: rtl838x: fix broadcast flooding with many multicast entries
When many multicast entries are installed broadcast flooding might
potentially stop working for several ports. This is because the layer
2 broadcast flood port mask index has the wrong offset. It should be
9 bits, matching the 2^9 = 512 indexes on rtl838x, not 12.
The wrong offset leads to L2_BC_FLD_PMSK being set to 504, not 511
((511 << 12) >> 9) & 511 = 504). So, as by default an unset PMSK
is set to all ports, the issue would only become noticeable once
many multicast entries are installed, causing the 504th entry to be set
to something other than all ports.
Fixing this by setting the offset to 9 bits, to correctly point to our
511th reserved entry for all ports.
Tested-on: ZyXEL GS1900-24HP v1
Fixes: 28e972b2ea2f ("realtek: Configure initial L2 learning setup") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Link: https://github.com/openwrt/openwrt/pull/18733 Signed-off-by: Robert Marko <robimarko@gmail.com>
This additional board.d script creates the "/tmp/sysinfo/oem_name" file
and populates it with the proper OEM "supported_devices" metadata entry
to be used by the new fwtool.sh oem detection feature.
Daniel Golle [Wed, 7 May 2025 02:58:17 +0000 (03:58 +0100)]
generic: 6.12: update block NVMEM driver
Update block NVMEM driver based on backported OF partition support.
Note the different MMC card DT binding compared to the previous
downstream solution: Instead of having a 'partitions' subnode inside
a 'block' node, the 'partitions' node now resides directly under the
node representing the card.
In order to make references to the 'boot0' or 'boot1' hw partitions
you will have to define 'partitions-boot0' or 'partitions-boot1', and
move the NVMEM layout into a partition (you may, of course, use
'fixed-partitions' for that, and cover the whole device, if needed).
See also https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mmc/mmc-card.yaml?h=v6.13
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
ramips: update drivers to be compatible with kernel 6.12
Update drivers to be compatible with kernel 6.12:
- change deprecate function strlcpy to strscpy
- fix kernel warning "no previous prototype", by static declaration
- add missing of.h headers
Shiji Yang [Thu, 1 May 2025 02:18:52 +0000 (10:18 +0800)]
generic: fix MIPS -mno-long-calls patchset for 6.12 kernel
It seems that we need to override all execmem alloc/free callbacks,
not just for module. This is the default patch behavior in the 6.6
kernel. Fix the warning when the module is loaded:
Fixes: a9c0f28951fd ("generic: 6.12: move MIPS reloc patch from pending to hack and rework")
Ref: https://lore.kernel.org/all/20240505160628.2323363-1-rppt@kernel.org/ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Tested-by: Tony Ambardar <itugrok@yahoo.com> Link: https://github.com/openwrt/openwrt/pull/18721 Signed-off-by: Robert Marko <robimarko@gmail.com>
Some DTS files have a qsgmii link mode for the CPU port. This does
not harm but it is wrong. The CPU port of the realtek switch is always
directly connected to the switch by some unknown wiring and should
therefore be described as internal. Align the wrongly defined DTS
files to the standard.
This patch was added on linux v6.13 in order to avoid simple is_visible
functions on hwmon drivers.
See https://github.com/torvalds/linux/commit/79bc0af904db647979c735563299c9b0d820e432
Upstream e2015942e90a couldn't be backported to 6.6 because the following
symbols were missing:
- disable_work
- disable_work_sync
- enable_work
See https://github.com/torvalds/linux/commit/e2015942e90a021151a5751776f35830ba063be7
Reorganize patch numbers now that < 6.12 patches are no longer needed.
The following patches still differ from upstream:
- e340bff27e63
phy_set_eee_broken symbol is missing in 6.12
https://github.com/torvalds/linux/commit/e340bff27e63
The following patches can't be backported to 6.12 due to missing symbols:
- 5e7a74b6a357
phy_disable_eee_mode symbol is missing in 6.12
https://github.com/torvalds/linux/commit/5e7a74b6a357
Nick Hainke [Sun, 4 May 2025 20:38:10 +0000 (22:38 +0200)]
tools/b43-tools: update to latest version, fix C23 build
Update b43-tools to the latest upstream version to fix a
compilation error with C23:
util.h:25:15: error: 'bool' cannot be defined via 'typedef'
25 | typedef _Bool bool;
| ^~~~
Changelog: c6fc53f replace custom bool typedef with <stdbool.h> dadf30c fix format warning in compilation 2fe10ea b43-fwdump: Fix forwarding of arguments to disassembler
Robert Marko [Sat, 3 May 2025 22:06:28 +0000 (00:06 +0200)]
libiconv-full: update to 1.18
libiconv 1.17 fails to compile with GCC15 when doing the host build,
luckily version 1.18 already contains the fixes required so update to it.
New in 1.18:
* Many more transliterations, in particular also of Emoji characters.
* The iconv_open function is now POSIX:2024 compliant: it recognizes a
suffix //NON_IDENTICAL_DISCARD in the 'tocode' argument, with the effect
that characters that cannot be represented in the target character set
will be silently discarded. Whereas the suffix //IGNORE in the 'tocode'
argument has the effect of discarding not only characters that cannot be
represented in the target character set, but also invalid multibyte
sequences in the input.
Accordingly, the iconvctl function accepts requests
ICONV_GET_DISCARD_INVALID, ICONV_SET_DISCARD_INVALID,
ICONV_GET_DISCARD_NON_IDENTICAL, ICONV_SET_DISCARD_NON_IDENTICAL.
* The iconv_open function and the iconv program now support multiple suffixes,
such as //TRANSLIT//IGNORE, not only one.
* GB18030 is now an alias for GB18030:2005. A new converter for GB18030:2022
is added. Since this encoding merely cleans up a few private-use-area
mappings, you can continue to use the GB18030 converter, for backward
compatibility. Its Unicode to GB18030 conversion direction has been
enhanced, to help transitioning away from PUA code points.
* When converting from/to an EBCDIC encoding, a non-standard way of
converting newlines can be requested
- at the C level, by calling iconvctl with argument ICONV_SET_FROM_SURFACE
or ICONV_SET_TO_SURFACE, or
- from the iconv program, by setting the environment variable
ICONV_EBCDIC_ZOS_UNIX to a non-empty value.
* Special support for z/OS: The iconv program adds a charset metadata tag to
its output file. (Contributed by Mike Fulton.)
* For conversions from UCS-2, UCS-4, UTF-16, UTF-32, invoking
iconv(cd,NULL,NULL,...) now preserves the byte order state.
Robert Marko [Sat, 3 May 2025 21:56:04 +0000 (23:56 +0200)]
libiconv-full: drop patch-libtool fixup
It seems that this was required many years ago (It was added in 2012),
probably due to relying on outdated or broken libtool versions, but 1.17
uses libtool 2.4.7.
After trying building both host and target libiconv versions on Fedora and
MacOS I cannot seem to find what patch-libtool is supposed to fixup.
So, I can only presume that it is completely uneeded these days and can
be dropped.
Zoltan HERPAI [Sat, 3 May 2025 20:51:18 +0000 (20:51 +0000)]
dns320l-mcu: fix compilation with GCC14
Bump version to fix compiling with GCC14.
This fixes the following compile problem:
```
dns320l-daemon.c: In function 'main':
dns320l-daemon.c:740:18: error: implicit declaration of function 'isprint' [-Wimplicit-function-declaration]
740 | else if (isprint (optopt))
| ^~~~~~~
dns320l-daemon.c:50:1: note: include '<ctype.h>' or provide a declaration of 'isprint'
49 | #include "dns320l-daemon.h"
+++ |+#include <ctype.h>
50 |
dns320l-daemon.c:799:5: error: implicit declaration of function 'umask' [-Wimplicit-function-declaration]
799 | umask(0);
| ^~~~~
dns320l-daemon.c:864:5: error: 'return' with no value, in function returning non-void [-Wreturn-mismatch]
864 | return;
| ^~~~~~
dns320l-daemon.c:691:5: note: declared here
691 | int main(int argc, char *argv[])
| ^~~~
```
Stijn Tintel [Thu, 1 May 2025 22:46:25 +0000 (01:46 +0300)]
realtek: add missing symbol
Commit d7e82c78d7a2 added a generic kernel patch that exposes a new
symbol REALTEK_PHY_HWMON when REALTEK_PHY and HWMON are enabled. The new
symbol was added to kmod-phy-realtek, but the kmod is not used in the
realtek target.
Hauke Mehrtens [Fri, 2 May 2025 22:38:31 +0000 (00:38 +0200)]
toolchain: gcc: Backport patch to fix mips16 linking
Backport patch from upstream GCC 14 branch which fixes linking with
MIPS16 on the pistachio target.
This fixes the following link problem:
```
/builder/shared-workdir/build/staging_dir/toolchain-mipsel_24kc+24kf_gcc-14.2.0_musl/lib/gcc/mipsel-openwrt-linux-musl/14.2.0/../../../../mipsel-openwrt-linux-musl/bin/ld.bfd: ./liblua.so: undefined reference to `__mips16_ledf2'
/builder/shared-workdir/build/staging_dir/toolchain-mipsel_24kc+24kf_gcc-14.2.0_musl/lib/gcc/mipsel-openwrt-linux-musl/14.2.0/../../../../mipsel-openwrt-linux-musl/bin/ld.bfd: ./liblua.so: undefined reference to `__mips16_call_stub_df_2'
/builder/shared-workdir/build/staging_dir/toolchain-mipsel_24kc+24kf_gcc-14.2.0_musl/lib/gcc/mipsel-openwrt-linux-musl/14.2.0/../../../../mipsel-openwrt-linux-musl/bin/ld.bfd: ./liblua.so: undefined reference to `__mips16_muldf3'
```
Hauke Mehrtens [Fri, 2 May 2025 23:12:59 +0000 (01:12 +0200)]
dns320l-mcu: Fix compilation with GCC 14
This fixes the following compile problem:
```
dns320l-daemon.c: In function 'main':
dns320l-daemon.c:740:18: error: implicit declaration of function 'isprint' [-Wimplicit-function-declaration]
740 | else if (isprint (optopt))
| ^~~~~~~
dns320l-daemon.c:50:1: note: include '<ctype.h>' or provide a declaration of 'isprint'
49 | #include "dns320l-daemon.h"
+++ |+#include <ctype.h>
50 |
dns320l-daemon.c:799:5: error: implicit declaration of function 'umask' [-Wimplicit-function-declaration]
799 | umask(0);
| ^~~~~
dns320l-daemon.c:864:5: error: 'return' with no value, in function returning non-void [-Wreturn-mismatch]
864 | return;
| ^~~~~~
dns320l-daemon.c:691:5: note: declared here
691 | int main(int argc, char *argv[])
| ^~~~
```
Hauke Mehrtens [Fri, 2 May 2025 22:29:39 +0000 (00:29 +0200)]
boot-lantiq: Fix compilation with GCC 14
This fixes the following compile problem:
```
arv7506pw11.c: In function 'show_boot_progress':
arv7506pw11.c:59:24: error: 'return' with a value, in function returning void [-Wreturn-mismatch]
59 | return 0;
| ^
arv7506pw11.c:56:6: note: declared here
56 | void show_boot_progress(int arg)
| ^~~~~~~~~~~~~~~~~~
arv7506pw11.c:71:16: error: 'return' with a value, in function returning void [-Wreturn-mismatch]
71 | return 0;
| ^
arv7506pw11.c:56:6: note: declared here
56 | void show_boot_progress(int arg)
| ^~~~~~~~~~~~~~~~~~
```
Hauke Mehrtens [Fri, 2 May 2025 21:42:29 +0000 (23:42 +0200)]
ltq-adsl-app: Fix compilation with GCC 14
This fixes the following compile problem:
```
checking for asm/types.h... dsl_cpe_linux.c: In function 'DSL_CPE_ThreadInit':
dsl_cpe_linux.c:779:25: error: assignment to 'DSL_CPE_Thread_t' {aka 'int'} from 'pthread_t' {aka 'struct __pthread *'} makes integer from pointer without a cast [-Wint-conversion]
779 | pThrCntrl->tid = tid;
| ^
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadDelete':
dsl_cpe_linux.c:862:44: error: passing argument 1 of 'pthread_cancel' makes pointer from integer without a cast [-Wint-conversion]
862 | switch(pthread_cancel(pThrCntrl->tid))
| ~~~~~~~~~^~~~~
| |
| DSL_CPE_Thread_t {aka int}
In file included from dsl_cpe_linux.h:35:
/builder/shared-workdir/build/staging_dir/toolchain-mips_mips32_gcc-14.2.0_musl/include/pthread.h:98:20: note: expected 'pthread_t' {aka 'struct __pthread *'} but argument is of type 'DSL_CPE_Thread_t' {aka 'int'}
98 | int pthread_cancel(pthread_t);
| ^~~~~~~~~
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadIdGet':
dsl_cpe_linux.c:1123:11: error: returning 'pthread_t' {aka 'struct __pthread *'} from a function with return type 'DSL_CPE_Thread_t' {aka 'int'} makes integer from pointer without a cast [-Wint-conversion]
1123 | return pthread_self();
| ^~~~~~~~~~~~~~
```
While at it, fix also some additional build warnings.
Shiji Yang [Mon, 28 Apr 2025 16:01:42 +0000 (00:01 +0800)]
rtl8812au-ct: fix build issue on 6.12 kernel
Update USB shutdown callback for the 6.12 kernel. A sprintf
overlaps issue is also fixed in this patch. Unfortunately,
there are dozens of missing-prototypes warnings so it's hard
to fix them one by one. Let's just silence them.
Shiji Yang [Mon, 28 Apr 2025 14:15:51 +0000 (22:15 +0800)]
mac80211: fix unaligned.h header location for 6.12 kernel
Fix mt76 build error on 6.12 kernel:
In file included from /workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mt76-2025.04.11~be28ef77/mt76x0/eeprom.c:13:
/workspaces/openwrt/staging_dir/target-x86_64_musl/usr/include/mac80211-backport/asm/unaligned.h:3:15: fatal error: asm/unaligned.h: No such file or directory
3 | #include_next <asm/unaligned.h>
| ^~~~~~~~~~~~~~~~~
Shiji Yang [Mon, 28 Apr 2025 13:16:08 +0000 (21:16 +0800)]
mac80211: rt2x00: fix build warnings on 6.12 kernel
Move rt2x00lib_read_eeprom() function prototype from rt2800lib.h to
rt2x00.h and make rt6352_enable_pa_pin() static to fix the missing
prototypes warnings:
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c:213:5: error: no previous prototype for 'rt2x00lib_read_eeprom' [-Werror=missing-prototypes]
213 | int rt2x00lib_read_eeprom(struct rt2x00_dev *rt2x00dev)
| ^~~~~~~~~~~~~~~~~~~~~
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2800lib.c:308:6: error: no previous prototype for 'rt6352_enable_pa_pin' [-Werror=missing-prototypes]
308 | void rt6352_enable_pa_pin(struct rt2x00_dev *rt2x00dev, int enable)
| ^~~~~~~~~~~~~~~~~~~~
Thomas Richard [Mon, 28 Apr 2025 12:52:26 +0000 (14:52 +0200)]
arm-trusted-firmware-stm32: rework patch for the RTC configuration
A patch was added upstream to temporary enable RTC clock configuration only
for STM32MP15 boards. Use this patch instead of reverting commit 03a581e2.
Now for STM32MP135 boards RTC clock configuration is handled by optee-os.
This unfortunately is currently breaking all targets during building
as in 6.6 kernel there is
no CONFIG_NET_DSA_TAG_VSC73XX_8021Q, it was added in 6.11 AFAIK.
So they will all fail due to $(LINUX_DIR)/net/dsa/tag_vsc73xx_8021q.ko missing.
projects / thirdparty / openwrt.git / log
