Joe Zheng [Sat, 8 Feb 2025 01:18:03 +0000 (01:18 +0000)]
firmware: add package for Intel VPU/NPU firmware
Intel NPU device is an AI inference accelerator integrated with Intel
client CPUs, starting from Intel Core Ultra generation of CPUs
(formerly known as Meteor Lake). It enables energy-efficient execution
of artificial neural network tasks.
The full device name is Neural Processing Unit, but the Linux kernel
driver uses the older name - Versatile Processing Unit (VPU).
This package is for NPU/VPU firmware.
Details in https://github.com/intel/linux-npu-driver
Intel VPU firmware is now part of linux-firmware.
The current FW file names in linux-firmware do not match intel vpu
driver, create links to fix it
details in
https://github.com/torvalds/linux/blob/master/drivers/accel/ivpu/ivpu_fw.c
qualcommax: ipq60xx: add TP-Link EAP625-Outdoor HD v1 support
TP-Link EAP625-Outdoor HD is a 802.11ax AP claiming AX1800 support.
It is wall or pole mountable, and rated for outdoor use. It can only
be powered via PoE.
Hardware-wise, it is very similar to the older EAP610-Outdoor model.
Software-wise, I couldn't find a difference other than the board
data files, and device name. For this reason, the majority of the
devicetree from the EAP610-Outdoor is reused.
This device currently comes in a "v1", and "v1.6" version. The
"support-list" of the vendor firmware does not have a distinction
between these versions. This commit was tested on a 'V1.6" device.
Set up the device using the vendor's web UI. After that go to
Management->SSH and enable the "SSH Login" checkbox. Select "Save".
The connect to the machine via SSH:
ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device>
Disable signature verification:
cliclientd stopcs
Rename the "-web-ui-factory" image to something less than 63
characters, maintaining the ".bin" suffix.
* Go to System -> Firmware Update.
* Under "New Firmware File", click "Browse" and select the image
* Select "Update" and confirm by clicking "OK".
If the update fails, the web UI should show an error message.
Otherwise, the device should reboot into OpenWRT.
NOTE: If ssh continues to complain that "no matching host key type
found. Their offer: ssh-rsa,ssh-dss" it likely means that yor distro
has completely disabled deprecated siphers in ssh. In that case, run
the ssh command from a docker container of an older distro.
TFTP method
-----------
To flash via tftp, first place the initramfs image on the TFTP server.
setenv serverip <ip of tftp server>
setenv ipaddr <ip in same subnet as tftp server>
tftpboot tplink_eap625-outdoor-hd-v1-initramfs-uImage.itb
bootm
This should boot OpenWRT. Once booted, flash the sysupgrade.bin image
using either luci or the commandline.
I have an EAP625-Outdoor HD v1 that is very similar with the EAP610
Outdoor. It works with the EAP610 initramfs, without any obvious loss
of functionality. In order to prepare for supporting the EAP625, move
the common parts into a shared .dtsi.
Rosen Penev [Fri, 9 May 2025 22:20:08 +0000 (15:20 -0700)]
mac80211: move OF stuff to ath9k_of_init
It's the proper function to handle this stuff in.
The original patch abused the fact that the ath9k driver in init called
ath9k_init_platform to populate all the needed configuration. This is
the wrong place to do so and it also goes away in 6.13.
Move 553-ath9k_of_gpio_mask.patch contents to ath9k_of_init where they
belong.
David Bauer [Tue, 13 May 2025 23:49:44 +0000 (01:49 +0200)]
ramips: pad EX400 kernel partition to retain web recovery
The web-recovery of the Genexis EX400 validates uploaded images to fit
in the rootf_0 partition.
With OpenWrt, only the kernel is stored in this partition, leaving the
partition very small. Currently, the first factory release image won't
be accepted by the recovery interface after the OpenWrt installation.
Pad the image of the ubifs to 10MB. This allows the 24.10 release image
to be uploaded, enabling device recovery.
toolchain: gcc: backport patch to fix ICE with PowerPC targets
During the build of perl, the following ICE was reported in
https://github.com/openwrt/packages/issues/24565 when targeting PowerPC:
during RTL pass: reload
blocksort.c: In function 'mainSort.isra':
blocksort.c:1011:1: internal compiler error: in patch_jump_insn, at cfgrtl.cc:1303
1011 | }
| ^
0x7d49cee29d8f __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
0x7d49cee29e3f __libc_start_main_impl
../csu/libc-start.c:392
Please submit a full bug report, with preprocessed source (by using -freport-bug).
Please include the complete backtrace with any bug report.
See <http://bugs.openwrt.org/> for instructions.
The same issue also caused the CI failures in
https://github.com/openwrt/packages/pull/26501.
The issue only occurs with GCC 14.2.0, but not with the head of the
releases/gcc-14 maintenance branch; a bisect found that this patch fixes
it.
For kernel 6.12 there is a warning causing an error:
drivers/mtd/nand/mtk_bmt_v2.c: In function 'mtk_bmt_get_mapping_mask':
drivers/mtd/nand/mtk_bmt_v2.c:307:31: error: 'kmalloc_array_noprof' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
307 | used = kcalloc(sizeof(unsigned long), BIT_WORD(bmtd.bmt_blk_idx) + 1, GFP_KERNEL);
| ^~~~~~~~
Shiji Yang [Sat, 10 May 2025 09:19:19 +0000 (17:19 +0800)]
ltq-adsl-mei: fix 'inline' declaration warning
Adjust the 'inline' declaration order to fix the build warning:
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/ltq-adsl-mei-danube/ltq-adsl-mei/drv_mei_cpe.c:188:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
188 | static void inline MEI_MASK_AND_ACK_IRQ(int x)
| ^~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
fix inline declaration warning
Shiji Yang [Sat, 10 May 2025 09:19:18 +0000 (17:19 +0800)]
ltq-vmmc: fix ignored-qualifiers warning
NULL and fixed addresses are constant, const qualifier are useless.
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:47:1: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
47 | const void (*ifx_bsp_basic_mps_decrypt)(unsigned int addr, int n) = NULL;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:246:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
246 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf0017c4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:249:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
249 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001ea4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:252:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
252 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001f38;
| ^~~~~
Shiji Yang [Sat, 10 May 2025 09:19:18 +0000 (17:19 +0800)]
ltq-atm: apply local patch to the source files
This package is maintained by the OpenWrt local repository. There
is no need to modify it with the patch file. Just apply all patches
to the source files.
Andre Heider [Sat, 10 May 2025 09:19:18 +0000 (17:19 +0800)]
vrx518_ep: fix compilation error with kernel 6.12
PCI_IRQ_LEGACY was renamed to PCI_IRQ_INTX for kernel 6.10. Fix
compilation error:
/home/db/owrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/vrx518_ep-2.1.0/ep.c:469:69: error: 'PCI_IRQ_LEGACY' undeclared (first use in this function); did you mean 'NR_IRQS_LEGACY'?
469 | err = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_MSI | PCI_IRQ_LEGACY);
| ^~~~~~~~~~~~~~
| NR_IRQS_LEGACY
Signed-off-by: Andre Heider <a.heider@gmail.com> Co-authored-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/18744 Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Mon, 12 May 2025 18:14:52 +0000 (20:14 +0200)]
qualcommax: fix PCIe card wifi node address
Unlike other buses, for PCIe child nodes we should not use "wifi@1,0" as
the bus adress since for PCI devices the actual device adress on the bus is
actually set via the "reg" property and the node name is unused completely.
Though, it will cause DTC to throw warnings, so after investigation and
similar issue upstream[1] simply set the nodes to "wifi@0,0" instead.
Robert Marko [Tue, 13 May 2025 10:12:39 +0000 (12:12 +0200)]
qualcommax: ipq50xx: add missing bus-range to PCIe bridges
It seems that bus-range property was missed for the PCIe bridges on
IPQ50xx, thus causing DTC to warn on any bus adress used on nodes
under the PCIe bridges.
Nick Hainke [Sun, 11 May 2025 19:06:50 +0000 (21:06 +0200)]
libtracefs: update to 1.8.2
Changelog: 0379096 libtracefs: version 1.8.2 e2e0b4d sqlhist: Add bash completion for the sqlhist utility 78dd6d5 libtracefs: Add trace_sql.bash for tracefs_sql() bash completions 4f66bca libtracefs: Fix trace_sql() to handle buckets cast 6680dae libtracefs: Have tracefs_sql() cast handle stacktrace 4668195 libtracefs: Handle synthetic events with dynamic strings as fields 48a7752 libtracefs: Fix COMM for use as a field for tracefs_sqlhist() a8d57d2 libtracefs: Fix mistaken update to TRACEFS_STACKTRACE macro 6e913f7 libtracefs: utest: Do not fail if uprobes are not supported by kernel 5db5cf5 libtracefs: Rerun bison and flex via make sqlhist_remake 1514530 libtracefs: Add make sqlhist_remake to run bison and flex d49b6fa libtrace: Fix memory leak in tracefs_cpu 07cff64 libtracefs: Fix the read file failure code checking 457f02f trace-cmd: Unit test for tracefs_instance_file_append() API a2bfb49 libtracefs: utest: Rename private functions to fix static building 65f629e libtracefs utest: Do not test more events than what the ring buffer can hold 05a5dc4 libtracefs utest: Fix min percent test 0a46992 libtracefs utest: Add test to check handling multiple dynamic events bd47435 libtracefs: Destroy synthetic and eprobes before other events 78d8d2e libtracefs: Have tracefs_dynevent_get_all() find kprobes and uprobes properly ef70c00 libtracefs .gitignore: Ignore utest/trace-utest in git ff20336 libtracefs utest: Do not test kprobe interface if there's no kprobes 93d9049 libtracefs: Have tracefs_instance_tracers() return instance tracers 4cbebed libtracefs: Documentation: Add missing documentation to meson.build
Benjamin Berg [Wed, 30 Apr 2025 19:15:18 +0000 (21:15 +0200)]
mac80211: add patch to suppress PREP when mesh forwarding is disabled
This fixes a bug where mac80211 would respond to a PREQ frame when a
neighbor table entry exists locally even though it will not forward the
frame and the reported path does not actually work.
We are lucky to have a working realtek environment. But some things where mixed
heavily. To say it clear a bus is a bus and an ethernet is an ethernet. With
the new naming conventions and defines this becomes even more obvious.
Decouple it by moving the bus specific parts out of the ethernet device. To
make the code more readable rename bus_priv variables to priv and sort variable
definitions in inverse tree order (length descending) where it makes sense.
At least since 2022 there is a major bug in the MDIO driver that
produces out-of-bound reads and erratic behaviour during initialization.
- mdiobus_scan_bus_c22() scans the bus for 64 devices (PHY_MAX_ADDR)
- private bus structure only supports 57 entry arrays (MAX_PORTS)
All the bus/reader writer functions accept calls with addr>=57 and will
silently read beyond their limits. This can lead to ghost SERDES like
https://github.com/openwrt/openwrt/issues/18665#issuecomment-2846053813
Add proper boundary checks and end the functions with -ENODEV that is
the only accepted error code from the bus scan function.
realtek: move private bus structure closer to the bus
Relocate the bus structure definition into the MDIO source code area
of the ethernet driver. So if the real bus driver is forked from the
rest of the code only one area needs to be removed. Rename it to make
clear it belongs to the bus.
Although a dfine is used to set the maxiumum number of SMI
busses (=4) it is not used at all appropriate places in the code.
Replace hard coded constants with that define.
Inside the ethernet driver lives the mdio bus. It is not always clear
what belongs where. Prefix some leftovers from the kernel 6.6 refactor
to clearly state what belongs to the bus. Group all defines together
in one place. This commit has no functional changes.
qualcommbe: ipq95xx: fix ipq-uniphy crash on IPQ9554
IPQ9554 does not have uniphy1. The "gcc_uniphy1_sys_clk" cannot be
enabled. This causes the ipq-uniphy driver to crash on .probe().
Add a patch to resolve the crash.
Felix Fietkau [Sun, 11 May 2025 13:25:54 +0000 (15:25 +0200)]
ucode: update to Git HEAD (2025-05-11)
567207a9bf16 fs: implement fileno() on directory handles eb1d93235509 fs: support passing directory handle or fd in chdir() 38a2254337f1 build: detect whether toolchain employs default source fortification 6eddfc9dff17 resolv: fix fd leak in send_queries 3d36856b2dc5 uci: fix memory leak on cursor() error aafde95f1ecf uci: add cursor() flags argument d8cebc5a6bfd Revert "WIP: lib: support map() over objects" 2599cf80736b zlib: incorporate latest PR changes 830f316a7e49 socker: let sock.peercred() clear error on success 4cbac141406e types: rename u64_to_constant flag to ext_flag d802fe5da5cd types: add support for resources with embedded data/values 71b4fdc6f60b types: add support for setting resource persistent flag 141f799eba08 uloop: use container_of instead of direct pointer casts 1396f8f2988d uloop: use uc_fn_thisval 9a121fc7440c uloop: drop object_registry 11b804d97086 socket: do not clear last_error in socket.error() d5b3a9dc1091 socket: add strerror() method
Fixes: https://github.com/jow-/ucode/issues/285 Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit corrects led phy names. This has been discussed
at link [1] and corrected in the mediatek target in the
commit a51fd20e0d65ef836ee6c1e13c39a529855af4a0. Now it's time
to do the same thing in the lantiq target.
David Bauer [Sun, 4 May 2025 02:45:03 +0000 (04:45 +0200)]
ramips: support Genexis EX400 touch controller
Add the necessary package dependencies as well as device-tree properties
to support the touch-inputs as well as missing LEDs on the Genexis Pulse
EX400 range extender.
David Bauer [Sun, 4 May 2025 02:47:32 +0000 (04:47 +0200)]
ramips: add Semtech SX9512 touch input driver
This driver is required for the touch-inputs as well as some LEDs on the
Genexis Pulse EX400.
The driver was also sent upstream. As the EX400 is currently the only
consumer, the driver is added target-specific for ramips.
Once the driver has been accepted upstream and is provided in a kernel
release used by OpenWrt, the package should be moved to the global input
drivers.
cmake: use RelWithDebInfo, not Debug, with CONFIG_DEBUG
Given the description of the configuration option at its definition in
target/sdk/files/Config.in ("Compile packages with debugging info" and "Adds -g3
to the CFLAGS", the more appropriate CMAKE build type is `RelWithDebInfo` rather
than `Debug`.
INAGAKI Hiroshi [Sat, 10 May 2025 07:33:04 +0000 (16:33 +0900)]
qualcommax: ipq50xx: fix NAND ECC for ELECOM WRC-X3000GS2
Specify 4-bit ECC strength instead of 8-bit, to resolve NAND I/O errors
on ELECOM WRC-X3000GS2.
ELECOM WRC-X3000GS2 has a Macronix MX35UF1G24AD SPI-NAND chip as a flash
storage. That chip is registered as a chip that has 128 bytes OOB and
requires 8-bit ECC, and described as the same in the Macronix's datasheet.
But on WRC-X3000GS2, 8-bit ECC breaks NAND I/O on mtdblock devices with
the following errors and 4-bit ECC needs to be used to resolve this issue.
current (ECC strength=8):
```
[ 1.401566] 0x000000480000-0x000000500000 : "0:appsblenv"
[ 1.407128] 1 fixed-partitions partitions found on MTD device 0:appsblenv
[ 1.410663] Creating 1 MTD partitions on "0:appsblenv":
[ 1.417359] 0x000000000000-0x000000040000 : "env-data"
[ 1.479865] u-boot-env-layout: probe of 79b0000.qpic-nand:flash@0:partitions:partition-0-appsblenv:partition@0:nvmem-layout failed with error -74
root@OpenWrt:~# strings /dev/mtdblock10
[ 55.693754] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
[ 55.694660] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[ 55.703147] I/O error, dev mtdblock10, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[ 55.711884] I/O error, dev mtdblock10, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[ 55.720778] I/O error, dev mtdblock10, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 55.730310] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 55.738607] Buffer I/O error on dev mtdblock10, logical block 0, async page read
```
after fixing (ECC strength=4):
```
[ 1.402301] 0x000000480000-0x000000500000 : "0:appsblenv"
[ 1.407909] 1 fixed-partitions partitions found on MTD device 0:appsblenv
[ 1.411370] Creating 1 MTD partitions on "0:appsblenv":
[ 1.418075] 0x000000000000-0x000000040000 : "env-data"
(no error)
root@OpenWrt:~# strings /dev/mtdblock10
[ 39.131008] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
bootcmd=bootipq
baudrate=115200
wifi2=7C:F8:54:01:BD:F3
CRASH_COUNT=0
...
```
Fixes: 01b72ce61e ("qualcommax: ipq50xx: remove ECC user config from board files") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18770 Signed-off-by: Robert Marko <robimarko@gmail.com>
kmod-drm-rp1-dsi, kmod-drm-rp1-dpi and kmod-drm-rp1-vec should depend on
kmod-drm-dma-helper and kmod-drm-vram-helper in order to fix dependency errors
when all kernel modules are selected.
Shiji Yang [Fri, 9 May 2025 14:12:11 +0000 (22:12 +0800)]
realtek rtl931x: mark subtarget as source-only
There are no supported devices on this sub-target. It can be
considered that it is still under development. Therefore,
there is no need to make the buildbot build it every day.
projects / thirdparty / openwrt.git / log
