Tony Ambardar [Mon, 15 Mar 2021 09:48:46 +0000 (02:48 -0700)]
x86/legacy: fix subtarget CPU for kernel 5.10
The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit
generic subtarget. However, the legacy subtarget arch wasn't set to the
older 586MMX, defaulting instead to the i686.
Explicitly set the subtarget arch and refresh the subtarget config, as done
already with the old geode subtarget.
Fixes: 8391781389 ("x86: support kernel 5.10") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Daniel Golle [Mon, 15 Mar 2021 16:39:20 +0000 (16:39 +0000)]
mediatek: mt7622: drop duplicate DEVICE_PACKAGES
kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part
of the target's default package set. No need to add them again for
buffalo_wsr-2533dhp2.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
INAGAKI Hiroshi [Sun, 7 Mar 2021 17:36:16 +0000 (18:36 +0100)]
mediatek: add support for Buffalo WSR-2533DHP2
This adds support for the Buffalo WSR-2533DHP2.
The device uses the Broadcom TRX image format with a special magic. To
be able to boot the images or load them they have to be wrapped with
different headers depending how it is loaded.
There are multiple ways to install OpenWrt on this device.
Boot ramdisk from U-Boot
----------------------------
This will load the image and not write it into the flash.
1. Stop boot menu with "space" key
2. Select "System Load Linux to SDRAM via TFTP."
3. Load this image:
openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin
4. The system boots the image
Write to flash from U-Boot
-----------------------------
This will load the image over tftp and directly write it into the flash.
1. Stop boot menu with "space" key
2. Select "System Load Linux Kernel then write to Flash via TFTP."
3. Load this image:
openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin
4. The system writes this image into the flash and boots into it.
Write to flash from Web UI
-----------------------------
This will load the image over over the Web UI and write it into the flash
1. Open the Web UI
2. Go to "管理" -> "ファームウェア更新"
3. Select "ローカルファイル指定" and click "更新実行"
4. Load this image:
openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin
5. The system writes this image into the flash and boots into it.
INAGAKI Hiroshi [Sun, 7 Mar 2021 15:47:17 +0000 (16:47 +0100)]
mtd: add option for TRX magic to fixtrx
Buffalo uses the TRX header with a different magic and even changes this
magic with different devices. This change allows to specify the header
to use as a command line argument.
This is needed for the Buffalo WSR-2533DHP2 based on mt7622.
Andre Heider [Tue, 16 Feb 2021 07:21:08 +0000 (08:21 +0100)]
build: prereq: drop support for Python 3.5
The final Python 3.5 release was 3.5.10 in September 2020 [0].
This release series is now End-of-Life (EOL).
The only LTS distribution that still only ships Python 3.5 is Ubuntu 16.04,
which will be EOL in April 2021 [1].
The meson build system bumped their python requirement to 3.6 for the 0.57.0
release. This patch ensures that OpenWrt can update meson while still
relying on the host python.
Paul Spooren [Thu, 4 Feb 2021 23:34:30 +0000 (13:34 -1000)]
scripts,ipkg-build: apply shellcheck
This commit cleans the `ipkg-build` script via changes suggested by
shellcheck. These are mostly word splitting issues.
Remove the definition of GZIP, this adds three "lookups" of the `gzip`
binary but the rest of the build system doesn't seem to use such
improvements neither.
Daniel Golle [Sun, 14 Mar 2021 19:11:14 +0000 (19:11 +0000)]
mediatek: mt7622: clean up image build
* clean up whitespace to make GPT partitioning more readable
* don't select packages already part of the target default selection
* don't select U-Boot variants (breaks ImageBuilder)
* don't select AHCI on boards without SATA
* don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices
work fine with the in-SoC XHCI host having just kmod-usb3 installed.
* select kmod-btmtkuart for devices with Bluetooth support
* sort DEVICE_PACKAGES
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Sun, 14 Mar 2021 18:22:18 +0000 (19:22 +0100)]
bcm4908: use accepted 5.13 DTS patches
Some patches were slightly cleaned up. One things worth mentioning is
that adding:
phy-mode = "rgmii"
broke SF2 driver. It made it access random register breaking switch
setup.
Hauke Mehrtens [Wed, 27 Jan 2021 21:16:11 +0000 (22:16 +0100)]
realtek: Add ZyXEL GS1900-8
The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or
SFP ports, but otherwise similar to the other GS1900 switches.
Specifications
--------------
* Device: ZyXEL GS1900-8 v1.2
* SoC: Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash: Macronix MX25L12835F 16 MiB
* RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM
* Ethernet: 8x 10/100/1000 Mbit
* LEDs: 1 PWR LED (green, not configurable)
1 SYS LED (green, configurable)
8 ethernet port status LEDs (green, SoC controlled)
* Buttons: 1 on-off glide switch at the back (not configurable)
1 reset button at the right side, behind the air-vent
(not configurable)
1 reset button on front panel (configurable)
* Power 12V 1A barrel connector
* UART: 1 serial header (JP2) with populated standard pin connector on
the left side of the PCB, towards the back. Pins are labelled:
+ VCC (3.3V)
+ TX (really RX)
+ RX (really TX)
+ GND
the labelling is done from the usb2serial connector's point of
view, so RX/ TX are mixed up.
Serial connection parameters for both devices: 115200 8N1.
Installation
------------
Instructions are identical to those for the GS1900-10HP and GS1900-8HP.
* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
space bar, and enable the network:
> rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
OEM firmware on the backup partition for the time being. OpenWrt can
only boot off the first partition anyway (hardcoded in the DTS). To
make sure we are manipulating the first partition, issue the following
commands:
> setsys bootpartition 0
> savesys
* Download the image onto the device and boot from it:
> tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin
> bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
> sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin
Dominick Grift [Sun, 14 Mar 2021 11:42:29 +0000 (12:42 +0100)]
selinux-policy: update to version v0.8
3d7da7a igmpproxy tidy some loose ends c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf 5a18967 adds igmpproxy skeleton 7e6a218 logread: support resolving dns names e39ca8b netifd: add support for /etc/udhcpc.user 7952bd0 odhcp6c: support /etc/odhcp6c.user ba0eb4e swconfig, fwenv, agent 4556b8a pppd cosmetic 9324d9d pppd: sends AT commands to model using /dev/ttyUSBN 417b14a ttydev: add some more ttyUSB ed739dc example: dont depend on policycoreutils 97613f9 dropbear: using dropbear as scp: dns name resolving 12c193b dropbear tcp connect ssh ports for scp c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional 8c5de35 this is a bug 8d5c463 uhttpd rcboot rcdnsmasq 094266e hostapd and wpa_supplicant aef0bd7 mountroot: maintains /tmp/sysupgrade.tar 24f0406 dropbear: allow it to read tmp.fs files 2901433 firstboot mkfsf2fs rcboot 2c4afb7 blockmount mmc 465ca98 adds industrial i/o (iio) nodedev 82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon 7df78bd ubus: "support" older ubusd versions that run as root 4458bce swconfig: allow using terminal (to print output) e8d606d sslcert: openssl linked: this shaves off 200 bytes 93afffb jshn ntpdhotplug 0b847f0 wpad: reads /etc/ssl/openssl.cnf f14ee34 indent fix a0c7cad mtd, uhttpd, ubus and ntpdhotplug d74f98f adds a not about checkreqprot requirement in some scenarios affacce example: add policycoreutils-setfiles for make check 4f944dc kmodloader and fwenv: efe36a3 netifd: adds a comment/reminder 581b087 more fw_printenv loose ends 30177a4 fw_setenv: needs mtd write access to set and delete env da28f4c fw_printenv: some minor clean ups a062053 fw_printenv missing rules 244ba5f blockmount: extroot and /rwm 0745a6a squid: allow squid to run sslcrtd with domain transition b851df6 squid fix 8c55acd squid: adds certfile and allow connect http but... b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid) 5ff39bd squid: forgot about luci 5366c97 squid/rcsquid some basic fill in 8743da6 squid skeleton 687a43b adds squid 3128 port to httpproxy port
This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368
and BCM63268.
BCM6358 needs a different driver, so there's no support for now.
Tony Ambardar [Fri, 12 Mar 2021 01:45:05 +0000 (17:45 -0800)]
tools/libelf: remove unneeded host library
This old ELF library dating to 2009 used to be necessary on MacOS but
is not required for building the kernel or tools since [1]. On Linux
systems, libelf is already an OpenWRT build-system prerequisite [2].
Presence of the older library can mask or conflict with the system libelf
and lead to build errors, as seen compiling Linux kernels since v5.8 or
host tools such as dwarves (e.g. pahole).
Remove the unnecessary tools/libelf library and avoid the related issues.
[1] 5f8e587240 ("build: force disable stack validation during kernel build
on non-linux systems")
[2] https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites
Tested-by: Rosen Penev <rosenp@gmail.com> (Linux) Tested-by: Georgi Valkov <gvalkov@abv.bg> (MacOS) Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Tue, 26 Jan 2021 22:37:04 +0000 (14:37 -0800)]
elfutils: remove host build from target package
Commit f4da28c301 ("elfutils: Add host build") supplied a libelf host
library to fix a glib2 host build error, but this need was later removed
by b6212c8769 ("glib2: don't use libelf during host build").
More importantly, there are already two sources for libelf host libraries:
OpenWRT build prerequisites [1] and tools/libelf. A third is not needed.
mvebu: LS421DE: make cosmetics changes in dts file
Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS:
- Delete pointless #xxx-cells
- bootargs: replace earlyprintk with earlycon and remove unneeded args.
- Separate pinmux nodes with empty lines.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Rafał Miłecki [Fri, 12 Mar 2021 17:30:01 +0000 (18:30 +0100)]
kernel: add pending mtd patches adding NVMEM support
It's meant to provide upstream support for mtd & NVMEM. It's required
e.g. for reading MAC address from mtd partition content. It seems to be
in a final shape so it's worth testing.
Rafał Miłecki [Fri, 12 Mar 2021 17:10:09 +0000 (18:10 +0100)]
bcm53xx: initialize NVRAM from NVMEM driver
NVRAM access may be needed early in boot process. Reading it using mtd
happens quite late in the init process. Add NVRAM initialization to the
NVMEM driver which comes up early and depends on IO mapping only.
This is required by Linksys devices which use NVRAM content for proper
partitioning (detecting current firmware partition).
Bjørn Mork [Thu, 11 Mar 2021 12:35:38 +0000 (13:35 +0100)]
realtek: drop ethtool log noise
Demote a number of debugging printk's to pr_debug to avoid log
nosie. Several of these functions are called as a result of
userspace activity. This can cause a lot of log noise when
userspace does periodic polling.
Most of this could probably be removed completely, but let's
keep it for now since these drivers are still in development.
Daniel Golle [Sat, 20 Feb 2021 13:04:38 +0000 (13:04 +0000)]
uboot-mediatek: update to 2021.04-rc3 with MediaTek's patches
MediaTek published their current U-Boot patchset on github:
https://github.com/mtk-openwrt/u-boot/commits/mtksoc
Import the platform patches from there (`00-mtk-*.patch`), arrange,
them nicely, drop no longer needed local patches and rebase on top of
U-Boot 2021.04-rc3.
Tested and works well on Linksys E8450 (snand-1ddr) as well as
Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 11 Mar 2021 16:01:32 +0000 (16:01 +0000)]
arm-trusted-firmware-mediatek: update to 2021-03-10
Most prominently this adds changes which allow replacing the binary-
only 'bromimage' tool by U-Boot's 'mkimage' (see previous commit).
This fixes build on non-Linux and/or non-x86 platforms.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rui Salvaterra [Tue, 9 Mar 2021 22:22:09 +0000 (22:22 +0000)]
netifd: add a udhcpc.user placeholder script
Document the existence of this feature. This allows the user to execute a script
at each DHCPv4 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.
Rui Salvaterra [Tue, 9 Mar 2021 22:16:05 +0000 (22:16 +0000)]
odhcp6c: add a odhcp6c.user placeholder script
Document the existence of this feature. This allows the user to execute a script
at each DHCPv6 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.
Paul Spooren [Mon, 8 Mar 2021 04:09:32 +0000 (18:09 -1000)]
include: store ABIVersion in Packages index
With the existence of ABI versions there is no clean way to determine
the package name without an attached ABI version. The Packages index is
stored on device to know what packages are installed.
The ABIVersion was recently removed in c921650382 "build: drop ABI
version from metadata", while ABI versions still exists. This becomes a
problem if a user tries to export installed packages via `ubus call
rpcd-sys packagelist` which would return package names including the ABI
version. Trying to find these packages in a later release with changes
ABI version is impossible.
This commits adds the `ABIVersion` field again. Knowing both the
combined (SourceName + ABIVersion) and the `ABIVersion` it is possible
to calculate the package `SourceName` without storing it in the
on-device package list.
Dominick Grift [Sat, 6 Mar 2021 20:02:40 +0000 (21:02 +0100)]
secilc: update to version 3.2
49ff851c secilc: fixes cil_role_statements.md example 03881703 secilc/docs: add custom color theme 4c8d6094 secilc/docs: add syntax highlighting for secil 057d72af secilc/docs: use fenced code blocks for cil examples e8bcdb84 cil_network_labeling_statements: fixes nodecon examples eefa5511 cil_access_vector_rules: allowx, auditallowx and dontauditx fixes 9e9b8103 secilc/docs: document expandtypeattribute fbe1e526 Update the cil docs to match the current behaviour.
Dominick Grift [Sat, 6 Mar 2021 20:02:39 +0000 (21:02 +0100)]
policycoreutils: update to version 3.2
d464187c policycoreutils: sestatus belongs to bin not sbin d59932a7 policycoreutils: Resolve path in restorecon_xattr 5682c0d5 policycoreutils/fixfiles.8: add missing file systems and merge check and verify 57dd1f65 policycoreutils/setfiles: Drop unused nerr variable be7f54cb setfiles: drop ABORT_ON_ERRORS and related code 9207823c setfiles: Do not abort on labeling error c064d214 selinux_config(5): add a note that runtime disable is deprecated 8bc865e1 newrole: support cross-compilation with PAM and audit ba2d6c10 fixfiles: correctly restore context of mountpoints
Dominick Grift [Sat, 6 Mar 2021 20:02:37 +0000 (21:02 +0100)]
libselinux: update to version 3.2
142826a3 libselinux: fix segfault in add_xattr_entry() 398d2cee libselinux: rename gettid() to something which never conflicts with the libc 8f0f0a28 selinux(8,5): Describe fcontext regular expressions 9cc6b5cf libselinux/getconlist: report failures 156dd0de libselinux: update getseuser e2dca5df libselinux: accept const fromcon in get_context API da4829d0 libselinux: Always close status page fd 45b15c22 selinux(8): explain that runtime disable is deprecated 3c16aaef selinux(8): mark up SELINUX values c2a58cc5 libselinux: LABEL_BACKEND_ANDROID add option to enable db0f2f38 libselinux: Add build option to disable X11 backend 4a142ac4 libsepol: Bump libsepol.so version d23342a9 libselinux: convert matchpathcon to selabel_lookup() 7ef5b185 libselinux: Change userspace AVC setenforce and policy load messages to audit format. f5d644c7 libselinux: Add additional log callback details in man page for auditing. 075f9cfe libselinux: Fix selabel_lookup() for the root dir. a4149e0e libselinux: Add new log callback levels for enforcing and policy load notices. a63f93d8 libselinux: initialize last_policyload in selinux_status_open() ef902db9 libselinux: safely access shared memory in selinux_status_updated() 9e4480b9 libselinux: Remove trailing slash on selabel_file lookups. 21fb5f20 libselinux: use full argument specifiers for security_check_context in man page e7abd802 libselinux: fix build order 05bdc031 libselinux: use kernel status page by default
Dominick Grift [Sat, 6 Mar 2021 20:02:36 +0000 (21:02 +0100)]
libsepol: update to version 3.2
a9e0004f libsepol: invalidate the pointer to the policydb if policydb_init fails 6238e025 libsepol/cil: fix NULL pointer dereference in cil_fill_ipaddr b69d77bc libsepol/cil: handle SID without assigned context when writing policy.conf 0861c659 libsepol: Validate policydb values when reading binary policy 8f5409cf libsepol: Create function ebitmap_highest_set_bit() 0451adeb libsepol/cil: Destroy disabled optional blocks after pass is complete 32f8ed3d libsepol/cil: introduce intermediate cast to silence -Wvoid-pointer-to-enum-cast 4662bdc1 libsepol/cil: be more robust when encountering <src_info> 6b561058 libsepol/cil: fix NULL pointer dereference with empty macro argument 0d0e47c7 libsepol/cil: Fix integer overflow in the handling of hll line marks 1b36ace2 libsepol: include header files in source files when matching declarations 1f1fa9d4 libsepol: uniformize prototypes of sepol_mls_contains and sepol_mls_check 72a88d75 libsepol: remove unused files eba0ffee libsepol/cil: Fix heap-use-after-free when using optional blockinherit 1048f8d3 libsepol/cil: unlink blockinherit->block link when destroying a block b3202918 libsepol/cil: fix memory leak when a constraint expression is too deep f0d98f83 libsepol/cil: Fix heap-use-after-free in __class_reset_perm_values() 5d021d66 libsepol/cil: Update symtab nprim field when adding or removing datums 34bd9a9d libsepol: destroy filename_trans list properly bdf4e332 libsepol/cil: fix NULL pointer dereference when parsing an improper integer b7ea65f5 libsepol/cil: destroy perm_datums when __cil_resolve_perms fails 228c06d9 libsepol/cil: fix out-of-bound read in cil_print_recursive_blockinherit a25d9104 libsepol/cil: constify some strings e2d01842 libsepol/cil: propagate failure of cil_fill_list() 6c8fca10 libsepol/cil: do not add a stack variable to a list 38a09b74 libsepol/cil: fix NULL pointer dereference when using an unused alias 3c357285 libsepol/cil: remove useless print statement 90809674 libsepol/cil: always destroy the lexer state d16a1e46 libsepol/cil: Use the macro FLAVOR() whenever possible 2aac859a libsepol/cil: Use the macro NODE() whenever possible d317b470 libsepol/cil: Remove unnecessary assignment in cil_resolve_name_keep_aliases() 9b9761cf libsepol/cil: Remove unused field from struct cil_args_resolve e257d4c7 libsepol/cil: Get rid of unnecessary check in cil_gen_node() ebba2b00 libsepol/cil: cil_tree_walk() helpers should use CIL_TREE_SKIP_* 89dab467 libsepol: free memory when realloc() fails 2d353bd5 libsepol/cil: Give error for more than one true or false block 4a142ac4 libsepol: Bump libsepol.so version 506c7b95 libsepol: Drop deprecated functions ae58e84b libsepol: Get rid of the old and duplicated symbols c97d63c6 libsepol: silence potential NULL pointer dereference warning 64387cb3 libsepol: drop confusing BUG_ON macro 521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1 a152653b libsepol/cil: Fix neverallow checking involving classmaps 734e4beb libsepol/cil: Validate conditional expressions before adding to binary policy 685f577a libsepol/cil: Validate constraint expressions before adding to binary policy 8206b8cb libsepol: implement POLICYDB_VERSION_COMP_FTRANS 42ae834a libsepol,checkpolicy: optimize storage of filename transitions
Introduce new patch for automatically detecting RAM size.
Some boards have a different amount of RAM depending on the HW revision.
Therefore, automatically detecting the RAM size instead of hard-coding it will
reduce the number of device definitions.
Tony Ambardar [Mon, 1 Mar 2021 09:07:45 +0000 (01:07 -0800)]
bpftools: fix libbpf pkgconfig file
The pkgconfig file hardcodes a host library directory which cannot be
overridden by OpenWrt during builds. Use SED to fix this and potential
include directory problems, as is done with several other packages.
This fixes a strange issue intermittently seen building iproute2 on the
oxnas target:
iptables modules directory: /usr/lib/iptables
libc has setns: yes
SELinux support: no
libbpf support: no
libbpf version 0.3.0 is too low, please update it to at least 0.1.0
LIBBPF_FORCE=on set, but couldn't find a usable libbpf
Fixes: 2f0d672088c3 ("bpftools: add utility and library packages
supporting eBPF usage") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Daniel Golle [Sat, 6 Mar 2021 19:04:15 +0000 (19:04 +0000)]
ipq806x: work-around borked QCA SDK bootloader
The bootloader of many ipq806x boards seems to require the config node
of the FIT image to be 'config@1' (or a secific different value).
This requirement used to be implicitely satisfied because OpenWrt used
to also call the configuration node inside a FIT image 'config@1'.
However, as recent U-Boot now prohibits the use of the '@' symbol as
part of node names, this was changed by
commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes")
Explicitely restore the default name of the configuration node to
'config@1' on ipq806x.
(ipq807x is unaffected as DEVICE_DTS_CONFIG default is set
"config@hk01" in target/linux/ipq807x/image/Makefile)
Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 6 Mar 2021 18:59:16 +0000 (18:59 +0000)]
ipq40xx: work-around borked QCA SDK bootloader
The bootloader of many ipq40xx boards seems to require the config node
of the FIT image to be 'config@1' (or a secific different value).
This requirement used to be implicitely satisfied because OpenWrt used
to also call the configuration node inside a FIT image 'config@1'.
However, as recent U-Boot now prohibits the use of the '@' symbol as
part of node names, this was changed by
commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes")
Explicitely restore the default name of the configuration node to
'config@1' on ipq40xx.
Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 6 Mar 2021 18:38:30 +0000 (18:38 +0000)]
mediatek: disable RTC on Bananapi R64 and refresh patches
The in-SoC RTC of the Bananapi R64 is more disruptive than useful
without a battery connected. Disable it to not have Linux use the
RTC provided time 2000-01-01 00:00:00 after power-loss.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.
Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.
Note:
This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Ilya Lipnitskiy [Sat, 6 Mar 2021 02:28:42 +0000 (18:28 -0800)]
kernel: generic: filter out CONFIG_PLUGIN_HOSTCC
It appears to be an automatic Kconfig symbol that varies depending on
the host platform. There is no need to define it in target configs, so
filter it out.
Also sort config-filter entries alphabetically.
Cc: Adrian Schmutzler <mail@adrianschmutzler.de> Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
projects / thirdparty / openwrt.git / log
