Yann Collet [Wed, 17 Jan 2018 20:39:58 +0000 (12:39 -0800)]
zstdmt : fixed very large window sizes
would create too large buffers,
since default job size == window size * 4.
This would crash on 32-bit systems.
Also : jobSize being a 32-bit unsigned, it cannot be >= 4 GB,
so the formula was failing for large window sizes >= 1 GB.
Fixed now : max job Size is 2 GB, whatever the window size.
Yann Collet [Wed, 17 Jan 2018 01:35:00 +0000 (17:35 -0800)]
fix fileio progression status update
The compression % is no longer correct,
since it's no longer possible to make direct correlation
between nb bytes read and nb bytes written
due to large internal buffer inside CCtx
(exacerbated with --long).
The current "fix" is to no longer display the %.
A more complex solution will have to count exactly how much data has been consumed and compressed internally, within CCtx buffers.
Yann Collet [Wed, 17 Jan 2018 00:15:47 +0000 (16:15 -0800)]
introduced parameter ZSTD_p_nonBlockingMode
This new parameter makes it possible to call
streaming ZSTDMT with a single thread set
which is non blocking.
It makes it possible for the main thread to do other tasks in parallel
while the worker thread does compression.
Typically, for zstd cli, it means it can do I/O stuff.
Applied within fileio.c, this patch provides non-negligible gains during compression.
Tested on my laptop, with enwik9 (1000000000 bytes) : time zstd -f enwik9
With traditional single-thread blocking mode :
real 0m9.557s
user 0m8.861s
sys 0m0.538s
With new single-worker non blocking mode :
real 0m7.938s
user 0m8.049s
sys 0m0.514s
Yann Collet [Thu, 11 Jan 2018 19:16:32 +0000 (11:16 -0800)]
fixed #304
Pathological samples may result in literal section being incompressible.
This case is now detected,
and literal distribution is replaced by one that can be written into the dictionary.
Yann Collet [Thu, 11 Jan 2018 04:33:45 +0000 (20:33 -0800)]
fixed bug #976, reported by @indygreg
constants in zstd.h should not depend on MIN() macro which existence is not guaranteed.
Added a test to check the specific constants.
The test is a bit too specific.
But I have found no way to control a more generic "are all macro already defined" condition,
especially as this is a valid construction (the missing macro might be defined later, intentionnally).
Yann Collet [Sat, 30 Dec 2017 14:12:59 +0000 (15:12 +0100)]
improved btlazy2 : list of unsorted candidates can reach extDict
It used to stop on reaching extDict, for simplification.
As a consequence, there was a small loss of performance each time the round buffer would restart from beginning.
It's not a large difference though, just several hundreds of bytes on silesia.
This patch fixes it.
Yann Collet [Sat, 30 Dec 2017 10:37:18 +0000 (11:37 +0100)]
updated compression level table for btlazy2
now selected for levels 13, 14 and 15.
Also : dropped the requirement for monotonic memory budget increase of compression levels,,
which was required for ZSTD_estimateCCtxSize()
in order to ensure that a memory budget for level L is large enough for any level <= L.
This condition is now ensured at run time inside ZSTD_estimateCCtxSize().
Yann Collet [Sat, 30 Dec 2017 10:37:18 +0000 (11:37 +0100)]
updated compression level table for btlazy2
now selected for levels 13, 14 and 15.
Also : dropped the requirement for monotonic memory budget increase of compression levels,,
which was required for ZSTD_estimateCCtxSize()
in order to ensure that a memory budget for level L is large enough for any level <= L.
This condition is now ensured at run time inside ZSTD_estimateCCtxSize().
Yann Collet [Fri, 29 Dec 2017 18:14:18 +0000 (19:14 +0100)]
btlazy2 : optimization for dictionary compression
we want the dictionary table to be fully sorted,
not just lazily filled.
Dictionary loading is a bit more intensive,
but it saves cpu cycles for match search during compression.
Yann Collet [Thu, 28 Dec 2017 15:58:57 +0000 (16:58 +0100)]
first implementation of delayed update for btlazy2
This is a pretty nice speed win.
The new strategy consists in stacking new candidates as if it was a hash chain.
Then, only if there is a need to actually consult the chain, they are batch-updated,
before starting the match search itself.
This is supposed to be beneficial when skipping positions,
which happens a lot when using lazy strategy.
The baseline performance for btlazy2 on my laptop is :
15#calgary.tar : 3265536 -> 955985 (3.416), 7.06 MB/s , 618.0 MB/s
15#enwik7 : 10000000 -> 3067341 (3.260), 4.65 MB/s , 521.2 MB/s
15#silesia.tar : 211984896 -> 58095131 (3.649), 6.20 MB/s , 682.4 MB/s
(only level 15 remains for btlazy2, as this strategy is squeezed between lazy2 and btopt)
After this patch, and keeping all parameters identical,
speed is increased by a pretty good margin (+30-50%),
but compression ratio suffers a bit :
15#calgary.tar : 3265536 -> 958060 (3.408), 9.12 MB/s , 621.1 MB/s
15#enwik7 : 10000000 -> 3078318 (3.249), 6.37 MB/s , 525.1 MB/s
15#silesia.tar : 211984896 -> 58444111 (3.627), 9.89 MB/s , 680.4 MB/s
That's because I kept `1<<searchLog` as a maximum number of candidates to update.
But for a hash chain, this represents the total number of candidates in the chain,
while for the binary, it represents the maximum depth of searches.
Keep in mind that a lot of candidates won't even be visited in the btree,
since they are filtered out by the binary sort.
As a consequence, in the new implementation,
the effective depth of the binary tree is substantially shorter.
To compensate, it's enough to increase `searchLog` value.
Here is the result after adding just +1 to searchLog (level 15 setting in this patch):
15#calgary.tar : 3265536 -> 956311 (3.415), 8.32 MB/s , 611.4 MB/s
15#enwik7 : 10000000 -> 3067655 (3.260), 5.43 MB/s , 535.5 MB/s
15#silesia.tar : 211984896 -> 58113144 (3.648), 8.35 MB/s , 679.3 MB/s
aka, almost the same compression ratio as before,
but with a noticeable speed increase (+20-30%).
This modification makes btlazy2 more competitive.
A new round of paramgrill will be necessary to determine which levels are impacted and could adopt the new strategy.
Yann Collet [Wed, 27 Dec 2017 18:27:54 +0000 (19:27 +0100)]
windows ci : removed fullbench-dll from appveyor
the test is broken
previous version was too Windows-specific.
It needs to be either refactored to be cross-platform,
or be removed if it doesn't bring any value
(which is indeed unclear).
Yann Collet [Wed, 27 Dec 2017 16:49:18 +0000 (17:49 +0100)]
%.o objects files in /tests
Recipe in /tests rebuild everything from source for each target.
zstd is still a "small" project, so it's not prohibitive,
yet, rebuilding same files over and over represents substantial redundant work.
This patch replaces *.c files from /lib by their corresponding *.o files.
They cannot be compiled and stored directly within /lib,
since /tests triggers additional debug capabilities unwelcome in release binary.
So the resulting *.o are stored directly within /tests.
It turns out, it's difficult to find several target using *exactly* the same rules.
Using only the default rules (debug enabled, multi-threading disabled, no legacy)
a surprisingly small amount of targets share their work.
It's because, in many cases there are additional modifications requested :
some targets are 32-bits, some enable multi-threading, some enable legacy support,
some disable asserts, some want different kind of sanitizer, etc.
I created 2 sets of object files : with and without multithreading.
Several targets share their work, saving compilation time when running `make all`.
Also, obviously, when modifying one source file, only this one needs rebuilding.
For targets requiring some different setting, build from source *.c remain the rule.
The new rules have been tested within `-j` parallel compilation, and work fine with it.
Yann Collet [Tue, 19 Dec 2017 20:49:04 +0000 (21:49 +0100)]
ZSTD_resetCCtx_internal: fixed order of arguments
params1 was swapped with params2.
This used to be a non-issue when testing for strict equality,
but now that some tests look for "sufficient size" `<=`, order matters.
Yann Collet [Tue, 19 Dec 2017 08:43:03 +0000 (09:43 +0100)]
fix a subtle issue in continue mode
The deep fuzzer tests caught a subtle bug that was probably there for a long time.
The impact of the bug is not a crash, or any other clear error signal,
rather, it reduces performance, by cutting data into smaller blocks.
Eventually, the following test would fail because it produces too many 1-byte blocks,
requiring more space than buffer can provide :
`./zstreamtest_asan --mt -s3514 -t1678312 -i1678314`
The root scenario is as follows :
- Create context, initialize it using explicit parameters or a `cdict` to pin them down, set `pledgedSrcSize=1`
- The compression parameters will not be adapted, but `windowSize` and `blockSize` will be automatically set to `1`.
`windowSize` and `blockSize` are dynamic values, set within `ZSTD_resetCCtx_internal()`.
The automatic adaptation makes it possible to generate smaller contexts for smaller input sizes.
- Complete compression
- New compression with same context, using same parameters, but `pledgedSrcSize=ZSTD_CONTENTSIZE_UNKNOWN`
trigger "continue mode"
- Continue mode doesn't modify blockSize, because it used to depend on `windowLog` only,
but in fact, it also depends on `pledgedSrcSize`.
- The "old" blocksize (1) is still there,
next compression will use this value to cut input into blocks,
resulting in more blocks and worse performance than necessary performance.
Given the scenario, and its possible variants, I'm surprised it did not show up before.
But I suspect it did show up, it's just that it never triggered an error, because "worse performance" is not a trigger.
The above test is a special corner case, where performance is so impacted that it reaches an error case.
The fix works, but I'm not completely pleased.
I think the current code relies too much on implied relations between variables.
This will likely break again in the future when some related part of the code change.
Unfortunately, no time to make larger changes if we want to keep the release target for zstd v1.3.3.
So a longer term fix will have to be considered after the release.
To do : create a reliable test case which triggers this scenario for CI tests.
Yann Collet [Sat, 16 Dec 2017 20:48:13 +0000 (12:48 -0800)]
zstdmt via compress_generic: reduce opportunity to free/create mtctx
`zstreamtest --newapi` (and `--opaqueapi`) create and destroy way too many threads
resulting in failure of tsan tests,
and potentially connected to the qemu flaky tests.
This is because, at each test, the nb of threads can be changed (random).
The `--no-big-tests` directive reduce this choice to 1/2 threads,
in order to limit memory usage, especially for qemu and 32-bits builds.
Unfortunately, swapping between 1 and 2 threads is enough to constantly create/destroy new mtctx.
This patch takes advantage of the following property :
via compress_generic, no internal mtctx is needed for nbThreads < 2.
As a consequence, when nbThreads == 2, the currently active mtctx is necessarily good.
This dramatically reduces the nb of thread creations when invoking `zstreamtest --newapi --no-big-tests`
(only when parent cctx itself is created, which is randomized to 1/256 tests).
Expected outcome :
- at a minimum : tsan tests shall now work continuously without exploding the thread counter
- at best : flaky qemu tests on `zstreamtest --newapi --no-big-tests` may stop being flaky, due to less stress from constant thread creation/destruction
Real world impact :
minimal, I don't expect users to constantly change `nbThreads` between each invocation.
If `nbThreads` remains stable, existing implementation re-uses existing mtctx.
Also : `zstreamtest --newapi` but without `--no-big-tests` doesn't benefit as much,
since this test can select a random `nbThreads` value between 1 and 4.
The current patch only reduces opportunity to free/create mtctx (for example : 2->1->2 doesn't need a new mtctx)
but doesn't completely eliminate it, since `nbThreads` can still change between 2/3/4.
A more complete solution could be to only use 2 out of 4 allocated threads, thus keeping the pool at a constant size.
This would require a larger change to `POOL_*` api though.
projects / thirdparty / zstd.git / log
