Josh Steadmon [Mon, 30 Aug 2021 21:46:02 +0000 (14:46 -0700)]
sequencer: advise if skipping cherry-picked commit
Silently skipping commits when rebasing with --no-reapply-cherry-picks
(currently the default behavior) can cause user confusion. Issue
warnings when this happens, as well as advice on how to preserve the
skipped commits.
These warnings and advice are displayed only when using the (default)
"merge" rebase backend.
Update the git-rebase docs to mention the warnings and advice.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of GIT_TEST_FAIL_PREREQS is broken in
that checking for the lack of a prerequisite would not work. Avoid
the use of "if ! test_have_prereq X" in a test script.
* bc/t5607-avoid-broken-test-fail-prereqs:
t5607: avoid using prerequisites to select algorithm
Junio C Hamano [Mon, 30 Aug 2021 23:06:05 +0000 (16:06 -0700)]
Merge branch 'jk/range-diff-fixes'
"git range-diff" code clean-up.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
Junio C Hamano [Mon, 30 Aug 2021 23:06:03 +0000 (16:06 -0700)]
Merge branch 'jc/userdiff-pattern-hint'
Remind developers that the userdiff patterns should be kept simple
and permissive, assuming that the contents they apply are always
syntactically correct.
* jc/userdiff-pattern-hint:
userdiff: comment on the builtin patterns
Junio C Hamano [Mon, 30 Aug 2021 23:06:01 +0000 (16:06 -0700)]
Merge branch 'en/merge-strategy-docs'
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
Junio C Hamano [Mon, 30 Aug 2021 23:06:01 +0000 (16:06 -0700)]
Merge branch 'en/pull-conflicting-options'
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Mahi Kolla [Sat, 14 Aug 2021 01:09:56 +0000 (01:09 +0000)]
clone: set submodule.recurse=true if submodule.stickyRecursiveClone enabled
Based on current experience, when running git clone --recurse-submodules,
developers do not expect other commands such as pull or checkout to run
recursively into active submodules. However, setting submodule.recurse=true
at this step could make for a simpler workflow by eliminating the need for
the --recurse-submodules option in subsequent commands. To collect more
data on developers' preference in regards to making submodule.recurse=true
a default config value in the future, deploy this feature under the opt in
submodule.stickyRecursiveClone flag.
Signed-off-by: Mahi Kolla <mkolla2@illinois.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marvin Häuser [Mon, 30 Aug 2021 15:30:01 +0000 (15:30 +0000)]
send-email: avoid incorrect header propagation
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Marvin Häuser <mhaeuser@posteo.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: skip formatting updated refs with `--quiet`
When fetching, Git will by default print a list of all updated refs in a
nicely formatted table. In order to come up with this table, Git needs
to iterate refs twice: first to determine the maximum column width, and
a second time to actually format these changed refs.
While this table will not be printed in case the user passes `--quiet`,
we still go out of our way and do all these steps. In fact, we even do
more work compared to not passing `--quiet`: without the flag, we will
skip all references in the column width computation which have not been
updated, but if it is set we will now compute widths for all refs.
Fix this issue by completely skipping both preparation of the format and
formatting data for display in case the user passes `--quiet`, improving
performance especially with many refs. The following benchmark shows a
nice speedup for a quiet mirror-fetch in a repository with 2.3M refs:
Benchmark #1: HEAD~: git-fetch
Time (mean ± σ): 26.929 s ± 0.145 s [User: 24.194 s, System: 4.656 s]
Range (min … max): 26.692 s … 27.068 s 5 runs
Benchmark #2: HEAD: git-fetch
Time (mean ± σ): 25.189 s ± 0.094 s [User: 22.556 s, System: 4.606 s]
Range (min … max): 25.070 s … 25.314 s 5 runs
Summary
'HEAD: git-fetch' ran
1.07 ± 0.01 times faster than 'HEAD~: git-fetch'
While at it, this patch also fixes `adjust_refcol_width()` such that it
skips unchanged refs in case the user passed `--quiet`, where verbosity
will be negative. While this function won't be called anymore if so,
this brings the comment in line with actual code. Furthermore, needless
`verbosity >= 0` checks are now removed in `store_updated_refs()`: we
never print to the `note` buffer anymore in case `verbosity < 0`, so we
won't end up in that code block anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 29 Aug 2021 09:25:36 +0000 (11:25 +0200)]
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 16 Aug 2021 17:48:55 +0000 (17:48 +0000)]
sparse-index: copy dir_hash in ensure_full_index()
Copy the 'index_state->dir_hash' back to the real istate after expanding
a sparse index.
A crash was observed in 'git status' during some hashmap lookups with
corrupted hashmap entries. During an index expansion, new cache-entries
are added to the 'index_state->name_hash' and the 'dir_hash' in a
temporary 'index_state' variable 'full'. However, only the 'name_hash'
hashmap from this temp variable was copied back into the real 'istate'
variable. The original copy of the 'dir_hash' was incorrectly
preserved. If the table in the 'full->dir_hash' hashmap were realloced,
the stale version (in 'istate') would be corrupted.
The test suite does not operate on index sizes sufficiently large to
trigger this reallocation, so they do not cover this behavior.
Increasing the test suite to cover such scale is fragile and likely
wasteful.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original code from 08cdfb1337 (pack-objects --keep-unreachable,
2007-09-16), we add each object to the packing list with type
`obj->type`, where `obj` comes from `lookup_unknown_object()`. Unless we
had already looked up and parsed the object, this will be `OBJ_NONE`.
That's fine, since oe_set_type() sets the type_valid bit to '0', and we
determine the real type later on.
So the only thing we need from the object lookup is access to the
`flags` field so that we can mark that we've added the object with
`OBJECT_ADDED` to avoid adding it again (we can just pass `OBJ_NONE`
directly instead of grabbing it from the object).
But add_object_entry() already rejects duplicates! This has been the
behavior since 7a979d99ba (Thin pack - create packfile with missing
delta base., 2006-02-19), but 08cdfb1337 didn't take advantage of it.
Moreover, to do the OBJECT_ADDED check, we have to do a hash lookup in
`obj_hash`.
So we can drop the lookup_unknown_object() call completely, *and* the
OBJECT_ADDED flag, too, since the spot we're touching here is the only
location that checks it.
In the end, we perform the same number of hash lookups, but with the
added bonus that we don't waste memory allocating an OBJ_NONE object (if
we were traversing, we'd need it eventually, but the whole point of this
code path is not to traverse).
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is used to implement `pack-objects`'s `--keep-unreachable`
option, but can be simplified in a couple of ways:
- add_objects_in_unpacked_packs() iterates over all packs (and then
all packed objects) itself, but could use for_each_packed_object()
instead since the missing flags necessary were added in the previous
commit
- objects are added to an in_pack array which store (off_t, object)
tuples, and then sorted in offset order when we could iterate
objects in offset order.
There is a slight behavior change here: before we would have added
objects in sorted offset order among _all_ packs. Handing objects to
create_object_entry() in pack order for each pack (instead of
feeding objects from all packs simultaneously their offset relative
to different packs) is much more reasonable, if different than how
the code currently works.
- objects in a single pack are iterated in index order and searched
for in order to discover their offsets, which is much less efficient
than using the on-disk reverse index
Simplify the function by addressing each of the above and moving the
core of the loop into a callback function that we then pass to
for_each_packed_object() instead of open-coding the latter function
ourselves.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 30 Aug 2021 02:48:52 +0000 (22:48 -0400)]
object-store.h: teach for_each_packed_object to ignore kept packs
The next patch will reimplement a function that wants to iterate over
packed objects while ignoring packs which are marked as kept (either
in-core or on-disk).
Teach for_each_packed_object() to ignore all objects from those packs by
adding a new flag for each of the "kept" states that a pack can be in.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no other API docs in bundle.h, but this is at least a
start. We'll add a parameter to this function in a subsequent commit,
but let's start by documenting it.
The "/**" comment (as opposed to "/*") signifies the start of API
documentation. See [1] and bdfdaa4978d (strbuf.h: integrate
api-strbuf.txt documentation, 2015-01-16) and 6afbbdda333 (strbuf.h:
unify documentation comments beginnings, 2015-01-16) for a discussion
of that convention.
René Scharfe [Fri, 27 Aug 2021 18:35:35 +0000 (20:35 +0200)]
branch: allow deleting dangling branches with --force
git branch only allows deleting branches that point to valid commits.
Skip that check if --force is given, as the caller is indicating with
it that they know what they are doing and accept the consequences.
This allows deleting dangling branches, which previously had to be
reset to a valid start-point using --force first.
Reported-by: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 Aug 2021 18:32:06 +0000 (14:32 -0400)]
docs: use "character encoding" to refer to commit-object encoding
The word "encoding" can mean a lot of things (e.g., base64 or
quoted-printable encoding in emails, HTML entities, URL encoding, and so
on). The documentation for i18n.commitEncoding and i18n.logOutputEncoding
uses the phrase "character encoding" to make this more clear.
Let's use that phrase in other places to make it clear what kind of
encoding we are talking about. This patch covers the gui.encoding
option, as well as the --encoding option for git-log, etc (in this
latter case, I word-smithed the sentence a little at the same time).
That, coupled with the mention of iconv in the --encoding description,
should make this more clear.
The other spot I looked at is the working-tree-encoding section of
gitattributes(5). But it gives specific examples of encodings that I
think make the meaning pretty clear already.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 Aug 2021 18:30:15 +0000 (14:30 -0400)]
logmsg_reencode(): warn when iconv() fails
If the user asks for a pretty-printed commit to be converted (either
explicitly with --encoding=foo, or implicitly because the commit is
non-utf8 and we want to convert it), we pass it through iconv(). If that
fails, we fall back to showing the input verbatim, but don't tell the
user that the output may be bogus.
Let's add a warning to do so, along with a mention in the documentation
for --encoding. Two things to note about the implementation:
- we could produce the warning closer to the call to iconv() in
reencode_string_len(), which would let us relay the value of errno.
But this is not actually very helpful. reencode_string_len() does
not know we are operating on a commit, and indeed does not know that
the caller won't produce an error of its own. And the errno values
from iconv() are seldom helpful (iconv_open() only ever produces
EINVAL; perhaps EILSEQ from iconv() might be illuminating, but it
can also return EINVAL for incomplete sequences).
- if the reason for the failure is that the output charset is not
supported, then the user will see this warning for every commit we
try to display. That might be ugly and overwhelming, but on the
other hand it is making it clear that every one of them has not been
converted (and the likely outcome anyway is to re-try the command
with a supported output encoding).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Thu, 26 Aug 2021 19:10:06 +0000 (16:10 -0300)]
checkout: make delayed checkout respect --quiet and --no-progress
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 18 Aug 2021 09:24:56 +0000 (11:24 +0200)]
column: fix parsing of the '--nl' option
'git column's '--nl' option can be used to specify a "string to be
printed at the end of each line" (quoting the man page), but this
option and its mandatory argument has been parsed as OPT_INTEGER since
the introduction of the command in 7e29b8254f (Add column layout
skeleton and git-column, 2012-04-21). Consequently, any non-number
argument is rejected by parse-options, and any number other than 0
leads to segfault:
$ printf "%s\n" one two |git column --mode=plain --nl=foo
error: option `nl' expects a numerical value
$ printf "%s\n" one two |git column --mode=plain --nl=42
Segmentation fault (core dumped)
$ printf "%s\n" one two |git column --mode=plain --nl=0
one
two
Parse this option as OPT_STRING.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the initial reference advertisement, the Git server will first
announce all of its references to the client. The logic is handled in
`send_ref()`, which will allocate a new buffer for each refline it is
about to send. This is quite wasteful: instead of allocating a new
buffer each time, we can just reuse a buffer.
Improve this by passing in a buffer via the `ls_refs_data` struct which
is then reused on each reference.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Wed, 25 Aug 2021 20:16:46 +0000 (22:16 +0200)]
use xopen() to handle fatal open(2) failures
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Wed, 25 Aug 2021 20:14:09 +0000 (22:14 +0200)]
xopen: explicitly report creation failures
If the flags O_CREAT and O_EXCL are both given then open(2) is supposed
to create the file and error out if it already exists. The error
message in that case looks like this:
fatal: could not open 'foo' for writing: File exists
Without further context this is confusing: Why should the existence of
the file pose a problem? Isn't that a requirement for writing to it?
Add a more specific error message for that case to tell the user that we
actually don't expect the file to preexist, so the example becomes:
fatal: unable to create 'foo': File exists
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han-Wen Nienhuys [Mon, 23 Aug 2021 11:52:40 +0000 (13:52 +0200)]
refs: make errno output explicit for read_raw_ref_fn
This makes it explicit how alternative ref backends should report errors in
read_raw_ref_fn.
read_raw_ref_fn needs to supply a credible errno for a number of cases. These
are primarily:
1) The files backend calls read_raw_ref from lock_raw_ref, and uses the
resulting error codes to create/remove directories as needed.
2) ENOENT should be translated in a zero OID, optionally with REF_ISBROKEN set,
returning the last successfully resolved symref. This is necessary so
read_raw_ref("HEAD") on an empty repo returns refs/heads/main (or the default branch
du-jour), and we know on which branch to create the first commit.
Make this information flow explicit by adding a failure_errno to the signature
of read_raw_ref. All errnos from the files backend are still propagated
unchanged, even though inspection suggests only ENOTDIR, EISDIR and ENOENT are
relevant.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of them looks at errno after seeing a negative return from
lock_ref_oid_basic() to make any decision, and no caller of these three
functions looks at errno after they signal a failure by returning a
negative value. In particular,
* files_copy_or_rename_ref() - here, calls are followed by error()
(which performs I/O) or write_ref_to_lockfile() (which calls
parse_object() which may perform I/O)
* files_create_symref() - here, calls are followed by error() or
create_symref_locked() (which performs I/O and does not inspect
errno)
* files_reflog_expire() - here, calls are followed by error() or
refs_reflog_exists() (which calls a function in a vtable that is not
documented to use and/or preserve errno)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han-Wen Nienhuys [Mon, 23 Aug 2021 11:52:38 +0000 (13:52 +0200)]
refs: remove EINVAL errno output from specification of read_raw_ref_fn
This commit does not change code; it documents the fact that an alternate ref
backend does not need to return EINVAL from read_raw_ref_fn to function
properly.
This is correct, because refs_read_raw_ref is only called from;
* resolve_ref_unsafe(), which does not care for the EINVAL errno result.
* refs_verify_refname_available(), which does not inspect errno.
* files-backend.c, where errno is overwritten on failure.
* packed-backend.c (is_packed_transaction_needed), which calls it for the
packed ref backend, which never emits EINVAL.
A grep for EINVAL */*c reveals that no code checks errno against EINVAL after
reading references. In addition, the refs.h file does not mention errno at all.
A grep over resolve_ref_unsafe() turned up the following callers that inspect
errno:
* sequencer.c::print_commit_summary, which uses it for die_errno
* lock_ref_oid_basic(), which only treats EISDIR and ENOTDIR specially.
The files ref backend does use EINVAL. The files backend does not call into
the generic API (refs_read_raw), but into the files-specific function
(files_read_raw_ref), which we are not changing in this commit.
As the errno sideband is unintuitive and error-prone, remove EINVAL
value, as a step towards getting rid of the errno sideband altogether.
Spotted by Ævar Arnfjörð Bjarmason <avarab@gmail.com>.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs file backend: move raceproof_create_file() here
Move the raceproof_create_file() API added to cache.h and
object-file.c in 177978f56ad (raceproof_create_file(): new function,
2017-01-06) to its only user, refs/files-backend.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to the preceding commit where we removed the adjacent
"errno == EISDIR" condition in the same function, remove the
"last_errno != ENOTDIR" condition here.
It's not possible for us to hit this condition added in 5b2d8d6f218 (lock_ref_sha1_basic(): improve diagnostics for ref D/F
conflicts, 2015-05-11). Since a1c1d8170db (refs_resolve_ref_unsafe:
handle d/f conflicts for writes, 2017-10-06) we've explicitly caught
these in refs_resolve_ref_unsafe() before returning NULL:
We'd then always return the refname from refs_resolve_ref_unsafe()
even if we were in a broken state as explained in the preceding
commit. The elided context here is a call to refs_resolve_ref_unsafe().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we lock a reference like "foo" we need to handle the case where
"foo" exists, but is an empty directory. That's what this code added
in bc7127ef0f (ref locking: allow 'foo' when 'foo/bar' used to exist
but not anymore., 2006-09-30) seems like it should be dealing with.
Except it doesn't, and we never take this branch. The reason is that
when bc7127ef0f was written this looked like:
fd = open(path, O_RDONLY);
if (fd < 0)
return NULL;
I.e. we would attempt to read "foo" with open(), which would fail with
EISDIR and we'd return NULL. We'd then take this branch, call
remove_empty_directories() and continue.
Since a1c1d8170d (refs_resolve_ref_unsafe: handle d/f conflicts for
writes, 2017-10-06) we don't. E.g. in the case of
files_copy_or_rename_ref() our callstack will look something like:
At that point the first (now only) refs_resolve_ref_unsafe() call in
lock_ref_oid_basic() would do the equivalent of this in the resulting
call to refs_read_raw_ref() in refs_resolve_ref_unsafe():
/* Via refs_read_raw_ref() */
fd = open(path, O_RDONLY);
if (fd < 0)
/* get errno == EISDIR */
/* later, in refs_resolve_ref_unsafe() */
if ([...] && errno != EISDIR)
return NULL;
[...]
/* returns the refs/heads/foo to the caller, even though it's a directory */
return refname;
I.e. even though we got an "errno == EISDIR" we won't take this
branch, since in cases of EISDIR "resolved" is always
non-NULL. I.e. we pretend at this point as though everything's OK and
there is no "foo" directory.
We then proceed with the entire ref update and don't call
remove_empty_directories() until we call commit_ref_update(). See 5387c0d883 (commit_ref(): if there is an empty dir in the way, delete
it, 2016-05-05) for the addition of that code, and a1c1d8170db (refs_resolve_ref_unsafe: handle d/f conflicts for writes,
2017-10-06) for the commit that changed the original codepath added in bc7127ef0f to use this "EISDIR" handling.
Further historical commentary:
Before the two preceding commits the caller in files_reflog_expire()
was the only one out of our 4 callers that would pass non-NULL as an
oid. We would then set a (now gone) "resolve_flags" to
"RESOLVE_REF_READING" and just before that "errno != EISDIR" check do:
if (resolve_flags & RESOLVE_REF_READING)
return NULL;
There may have been some case where this ended up mattering and we
couldn't safely make this change before we removed the "oid"
parameter, but I don't think there was, see [1] for some discussion on
that.
In any case, now that we've removed the "oid" parameter in a preceding
commit we can be sure that this code is redundant, so let's remove it.
refs/files: remove unused "oid" in lock_ref_oid_basic()
In the preceding commit the last caller that passed a non-NULL OID was
changed to pass NULL to lock_ref_oid_basic(). As noted in preceding
commits use of this API has been going away (we should use ref
transactions, or lock_raw_ref()), so we're unlikely to gain new
callers that want to pass the "oid".
So let's remove it, doing so means we can remove the "mustexist"
condition, and therefore anything except the "flags =
RESOLVE_REF_NO_RECURSE" case.
Furthermore, since the verify_lock() function we called did most of
its work when the "oid" was passed (as "old_oid") we can inline the
trivial part of it that remains in its only remaining caller. Without
a NULL "oid" passed it was equivalent to calling refs_read_ref_full()
followed by oidclr().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the the preceding commit the "oid" parameter to reflog_expire()
is always NULL, but it was not cleaned up to reduce the size of the
diff. Let's do that subsequent API and documentation cleanup now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog expire: don't lock reflogs using previously seen OID
During reflog expiry, the cmd_reflog_expire() function first iterates
over all reflogs in logs/*, and then one-by-one acquires the lock for
each one and expires it. This behavior has been with us since this
command was implemented in 4264dc15e1 ("git reflog expire",
2006-12-19).
Change this to stop calling lock_ref_oid_basic() with the OID we saw
when we looped over the logs, instead have it pass the OID it managed
to lock.
This mostly mitigates a race condition where e.g. "git gc" will fail
in a concurrently updated repository because the branch moved since
"git reflog expire --all" was started. I.e. with:
error: cannot lock ref '<refname>': ref '<refname>' is at <OID-A> but expected <OID-B>
This behavior of passing in an "oid" was needed for an edge-case that
I've untangled in this and preceding commits though, namely that we
needed this OID because we'd:
1. Lookup the reflog name/OID via dwim_log()
2. With that OID, lock the reflog
3. Later in builtin/reflog.c we use the OID we looked as input to
lookup_commit_reference_gently(), assured that it's equal to the
OID we got from dwim_log().
We can be sure that this change is safe to make because between
dwim_log (step #1) and lock_ref_oid_basic (step #2) there was no other
logic relevant to the OID or expiry run in the cmd_reflog_expire()
caller.
We can thus treat that code as a black box, before and after this
change it would get an OID that's been locked, the only difference is
that now we mostly won't be failing to get the lock due to the TOCTOU
race[0]. That failure was purely an implementation detail in how the
"current OID" was looked up, it was divorced from the locking
mechanism.
What do we mean with "mostly"? It mostly mitigates it because we'll
still run into cases where the ref is locked and being updated as we
want to expire it, and other git processes wanting to update the refs
will in turn race with us as we expire the reflog.
That remaining race can in turn be mitigated with the
core.filesRefLockTimeout setting, see 4ff0f01cb7 ("refs: retry
acquiring reference locks for 100ms", 2017-08-21). In practice if that
value is high enough we'll probably never have ref updates or reflog
expiry failing, since the clients involved will retry for far longer
than the time any of those operations could take.
See [1] for an initial report of how this impacted "git gc" and a
large discussion about this change in early 2019. In particular patch
looked good to Michael Haggerty, see his[2]. That message seems to not
have made it to the ML archive, its content is quoted in full in my
[3].
I'm leaving behind now-unused code the refs API etc. that takes the
now-NULL "unused_oid" argument, and other code that can be simplified now
that we never have on OID in that context, that'll be cleaned up in
subsequent commits, but for now let's narrowly focus on fixing the
"git gc" issue. As the modified assert() shows we always pass a NULL
oid to reflog_expire() now.
Unfortunately this sort of probabilistic contention is hard to turn
into a test. I've tested this by running the following three subshells
in concurrent terminals:
(
rm -rf /tmp/git &&
git init /tmp/git &&
while true
do
head -c 10 /dev/urandom | hexdump >/tmp/git/out &&
git -C /tmp/git add out &&
git -C /tmp/git commit -m"out"
done
)
(
rm -rf /tmp/git-clone &&
git clone file:///tmp/git /tmp/git-clone &&
while git -C /tmp/git-clone pull
do
date
done
)
(
while git -C /tmp/git-clone reflog expire --all
do
date
done
)
Before this change the "reflog expire" would fail really quickly with
the "but expected" error noted above.
After this change both the "pull" and "reflog expire" will run for a
while, but eventually fail because I get unlucky with
core.filesRefLockTimeout (the "reflog expire" is in a really tight
loop). As noted above that can in turn be mitigated with higher values
of core.filesRefLockTimeout than the 100ms default.
As noted in the commentary added in the preceding commit there's also
the case of branches being racily deleted, that can be tested by
adding this to the above:
(
while git -C /tmp/git-clone branch topic master &&
git -C /tmp/git-clone branch -D topic
do
date
done
)
With core.filesRefLockTimeout set to 10 seconds (it can probably be a
lot lower) I managed to run all four of these concurrently for about
an hour, and accumulated ~125k commits, auto-gc's and all, and didn't
have a single failure. The loops visibly stall while waiting for the
lock, but that's expected and desired behavior.
refs/files: add a comment about refs_reflog_exists() call
Add a comment about why it is that we need to check for the the
existence of a reflog we're deleting after we've successfully acquired
the lock in files_reflog_expire(). As noted in [1] the lock protocol
for reflogs is somewhat intuitive.
This early exit code the comment applies to dates all the way back to 4264dc15e19 (git reflog expire, 2006-12-19).
Change the repo_dwim_log() function initially added as dwim_log() in eb3a48221fd (log --reflog: use dwim_log, 2007-02-09) to accept a NULL
oid parameter. The refs_resolve_ref_unsafe() function it invokes
already deals with it, but it didn't.
This allows for a bit more clarity in a reflog-walk.c codepath added
in f2eba66d4d1 (Enable HEAD@{...} and make it independent from the
current branch, 2007-02-03). We'll shortly use this in
builtin/reflog.c as well.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-indent this argument list that's been mis-indented since it was
added in 34c319970d1 (refs/debug: trace into reflog expiry too,
2021-04-23). This makes a subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs/files: remove unused "skip" in lock_raw_ref() too
Remove the unused "skip" parameter to lock_raw_ref(), it was never
used. We do use it when passing "skip" to the
refs_rename_ref_available() function in files_copy_or_rename_ref(),
but not here.
This is part of a larger series that modifies lock_ref_oid_basic()
extensively, there will be no more modifications of this function in
this series, but since the preceding commit removed this unused
parameter from lock_ref_oid_basic(), let's do it here too for
consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs/files: remove unused "extras/skip" in lock_ref_oid_basic()
The lock_ref_oid_basic() function has gradually been replaced by use
of the file transaction API, there are only 4 remaining callers of
it.
None of those callers pass non-NULL "extras" and "skip" parameters,
the last such caller went away in 92b1551b1d4 (refs: resolve symbolic
refs first, 2016-04-25), so let's remove the parameters.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 23 Aug 2021 11:36:04 +0000 (13:36 +0200)]
refs: drop unused "flags" parameter to lock_ref_oid_basic()
In the last commit we removed the REF_DELETING flag from
lock_ref_oid_basic(). Since then all of the remaining callers do pass
REF_NO_DEREF, but that has been ignored completely since 7a418f3a17 (lock_ref_sha1_basic(): only handle REF_NODEREF mode,
2016-04-22).
So we can simply get rid of the parameter entirely.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
advice: move advice.graftFileDeprecated squashing to commit.[ch]
Move the squashing of the advice.graftFileDeprecated advice over to an
external variable in commit.[ch], allowing advice() to purely use the
new-style API of invoking advice() with an enum.
See 8821e90a09a (advice: don't pointlessly suggest
--convert-graft-file, 2018-11-27) for why quieting this advice was
needed. It's more straightforward to move this code to commit.[ch] and
use it builtin/replace.c, than to go through the indirection of
advice.[ch].
Because this was the last advice_config variable we can remove that
old facility from advice.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
advice: remove use of global advice_add_embedded_repo
The external use of this variable was added in 532139940c9 (add: warn
when adding an embedded repository, 2017-06-14). For the use-case it's
more straightforward to track whether we've shown advice in
check_embedded_repo() than setting the global variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ben Boeckel [Mon, 23 Aug 2021 10:44:00 +0000 (12:44 +0200)]
advice: remove read uses of most global `advice_` variables
In c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ben Boeckel [Mon, 23 Aug 2021 10:43:59 +0000 (12:43 +0200)]
advice: add enum variants for missing advice variables
In daef1b300b0 (Merge branch 'hw/advice-add-nothing', 2020-02-14), two
advice settings were introduced into the `advice_config` array.
Subsequently, c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25)
started to deprecate `advice_config` in favor of a new array,
`advice_setting`.
However, the latter branch did not include the former branch, and
therefore `advice_setting` is missing the two entries added by the
`hw/advice-add-nothing` branch.
These are currently the only entries in `advice_config` missing from
`advice_setting`.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-lib: ignore paths that are outside $cwd if --relative asked
For diff family commands, we can tell them to exclude changes outside
of some directories if --relative is requested.
In diff_unmerge(), NULL will be returned if the requested path is
outside of the interesting directories, thus we'll run into NULL
pointer dereference in run_diff_files when trying to dereference
its return value.
Checking for return value of diff_unmerge before dereferencing
is not sufficient, though. Since, diff engine will try to work on such
pathspec later.
Let's not run diff on those unintesting entries, instead.
As a side effect, by skipping like that, we can save some CPU cycles.
Reported-by: Thomas De Zeeuw <thomas@slight.dev> Tested-by: Carlo Arenas <carenas@gmail.com> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6300, some tests are guarded behind some prerequisites.
Thus, objects created by those tests ain't available if those
prerequisites are unsatistified. Attempting to run "cat-file"
on those objects will run into failure.
In fact, running t6300 in an environment without gpg(1),
we'll see those warnings:
fatal: Not a valid object name refs/tags/signed-empty
fatal: Not a valid object name refs/tags/signed-short
fatal: Not a valid object name refs/tags/signed-long
Let's put those commands into the real tests, in order to:
* skip their execution if prerequisites aren't satistified.
* check their exit status code
The expected value for objects with type: commit needs to be
computed outside the test because we can't rely on "$3" there.
Furthermore, to prevent the accidental usage of that computed
expected value, BUG out on unknown object's type.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 25 Aug 2021 01:35:52 +0000 (21:35 -0400)]
t5323: drop mentions of "master"
Commit 0696232390 (pack-redundant: fix crash when one packfile in repo,
2020-12-16) added one some new tests to t5323. At the time, the sub-repo
we used was called "master". But in a parallel branch, this was switched
to "main".
When the latter branch was merged in 27d7c8599b (Merge branch
'js/default-branch-name-tests-final-stretch', 2021-01-25), some of those
spots caused textual conflicts, but some (for tests that were far enough
away from other changed code) were just semantic. The merge resolution
fixed up most spots, but missed this one.
Even though this did impact actual code, it turned out not to fail the
tests. Running 'cd "$master_repo"' ended up staying in the same
directory, running the test in the main trash repo instead of the
sub-repo. But because the point of the test is checking behavior when
there are no packfiles, it worked in either repo (since both are empty
at this point in the script).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 24 Aug 2021 22:32:41 +0000 (15:32 -0700)]
Merge branch 'ps/fetch-pack-load-refs-optim'
Loading of ref tips to prepare for common ancestry negotiation in
"git fetch-pack" has been optimized by taking advantage of the
commit graph when available.
* ps/fetch-pack-load-refs-optim:
fetch-pack: speed up loading of refs via commit graph
Junio C Hamano [Tue, 24 Aug 2021 22:32:40 +0000 (15:32 -0700)]
Merge branch 'jt/push-negotiation-fixes'
Bugfix for common ancestor negotiation recently introduced in "git
push" code path.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
Junio C Hamano [Tue, 24 Aug 2021 22:32:39 +0000 (15:32 -0700)]
Merge branch 'hn/refs-test-cleanup'
A handful of tests that assumed implementation details of files
backend for refs have been cleaned up.
* hn/refs-test-cleanup:
t6001: avoid direct file system access
t6500: use "ls -1" to snapshot ref database state
t7064: use update-ref -d to remove upstream branch
t1410: mark test as REFFILES
t1405: mark test for 'git pack-refs' as REFFILES
t1405: use 'git reflog exists' to check reflog existence
t2402: use ref-store test helper to create broken symlink
t3320: use git-symbolic-ref rather than filesystem access
t6120: use git-update-ref rather than filesystem access
t1503: mark symlink test as REFFILES
t6050: use git-update-ref rather than filesystem access
Junio C Hamano [Tue, 24 Aug 2021 22:32:39 +0000 (15:32 -0700)]
Merge branch 'en/ort-perf-batch-15'
Final batch for "merge -sort" optimization.
* en/ort-perf-batch-15:
merge-ort: remove compile-time ability to turn off usage of memory pools
merge-ort: reuse path strings in pool_alloc_filespec
merge-ort: store filepairs and filespecs in our mem_pool
diffcore-rename, merge-ort: add wrapper functions for filepair alloc/dealloc
merge-ort: switch our strmaps over to using memory pools
merge-ort: set up a memory pool
merge-ort: add pool_alloc, pool_calloc, and pool_strndup wrappers
diffcore-rename: use a mem_pool for exact rename detection's hashmap
merge-ort: rename str{map,intmap,set}_func()
Junio C Hamano [Tue, 24 Aug 2021 22:32:38 +0000 (15:32 -0700)]
Merge branch 'js/expand-runtime-prefix'
Pathname expansion (like "~username/") learned a way to specify a
location relative to Git installation (e.g. its $sharedir which is
$(prefix)/share), with "%(prefix)".
* js/expand-runtime-prefix:
expand_user_path: allow in-flight topics to keep using the old name
interpolate_path(): allow specifying paths relative to the runtime prefix
Use a better name for the function interpolating paths
expand_user_path(): clarify the role of the `real_home` parameter
expand_user_path(): remove stale part of the comment
tests: exercise the RUNTIME_PREFIX feature
Junio C Hamano [Tue, 24 Aug 2021 22:32:37 +0000 (15:32 -0700)]
Merge branch 'zh/ref-filter-raw-data'
Prepare the "ref-filter" machinery that drives the "--format"
option of "git for-each-ref" and its friends to be used in "git
cat-file --batch".
* zh/ref-filter-raw-data:
ref-filter: add %(rest) atom
ref-filter: use non-const ref_format in *_atom_parser()
ref-filter: --format=%(raw) support --perl
ref-filter: add %(raw) atom
ref-filter: add obj-type check in grab contents
Junio C Hamano [Tue, 24 Aug 2021 22:32:36 +0000 (15:32 -0700)]
Merge branch 'ab/http-drop-old-curl'
Support for ancient versions of cURL library (pre 7.19.4) has been
dropped.
* ab/http-drop-old-curl:
http: rename CURLOPT_FILE to CURLOPT_WRITEDATA
http: drop support for curl < 7.19.3 and < 7.17.0 (again)
http: drop support for curl < 7.19.4
http: drop support for curl < 7.16.0
http: drop support for curl < 7.11.1
Junio C Hamano [Tue, 24 Aug 2021 22:32:35 +0000 (15:32 -0700)]
Merge branch 'ds/add-with-sparse-index'
"git add" can work better with the sparse index.
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
Junio C Hamano [Tue, 24 Aug 2021 22:32:35 +0000 (15:32 -0700)]
Merge branch 'jc/bisect-sans-show-branch'
"git bisect" spawned "git show-branch" only to pretty-print the
title of the commit after checking out the next version to be
tested; this has been rewritten in C.
* jc/bisect-sans-show-branch:
bisect: simplify return code from bisect_checkout()
bisect: do not run show-branch just to show the current commit
rebase: emit one "fatal" in "fatal: fatal: <error>"
The die() routine adds a "fatal: " prefix, there is no reason to add
another one. Fixes code added in e65123a71d0 (builtin rebase: support
`git rebase <upstream> <switch-to>`, 2018-09-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 21 Aug 2021 12:52:40 +0000 (14:52 +0200)]
compat: let git_mmap use malloc(3) directly
xmalloc() dies on error, allows zero-sized allocations and enforces
GIT_ALLOC_LIMIT for testing. Our mmap replacement doesn't need any of
that. Let's cut out the wrapper, reject zero-sized requests as required
by POSIX and use malloc(3) directly. Allocation errors were needlessly
handled by git_mmap() before; this code becomes reachable now.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 24 Aug 2021 15:44:00 +0000 (15:44 +0000)]
maintenance: skip bootout/bootstrap when plist is registered
On macOS, we use launchctl to manage the background maintenance
schedule. This uses a set of .plist files to describe the schedule, but
these files are also registered with 'launchctl bootstrap'. If multiple
'git maintenance start' commands run concurrently, then they can collide
replacing these schedule files and registering them with launchctl.
To avoid extra launchctl commands, do a check for the .plist files on
disk and check if they are registered using 'launchctl list <name>'.
This command will return with exit code 0 if it exists, or exit code 113
if it does not.
We can test this behavior using the GIT_TEST_MAINT_SCHEDULER environment
variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Tue, 24 Aug 2021 18:01:29 +0000 (20:01 +0200)]
t9001: PATH must not use Windows-style paths
On Windows, $(pwd) returns a drive-letter style path C:/foo, while $PWD
contains a POSIX style /c/foo path. When we want to interpolate the
current directory in the PATH variable, we must not use the C:/foo style,
because the meaning of the colon is ambiguous. Use the POSIX style.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mickey Endito [Mon, 23 Aug 2021 20:12:40 +0000 (20:12 +0000)]
t5582: remove spurious 'cd "$D"' line
The variable D is never defined in test t5582, more severely the test
fails if D is defined by something outside the test suite, so remove
this spurious line.
Signed-off-by: Mickey Endito <mickey.endito.2323@protonmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Atharva Raykar [Tue, 24 Aug 2021 14:06:09 +0000 (19:36 +0530)]
submodule--helper: run update procedures from C
Add a new submodule--helper subcommand `run-update-procedure` that runs
the update procedure if the SHA1 of the submodule does not match what
the superproject expects.
This is an intermediate change that works towards total conversion of
`submodule update` from shell to C.
Specific error codes are returned so that the shell script calling the
subcommand can take a decision on the control flow, and preserve the
error messages across subsequent recursive calls of `cmd_update`.
This change is more focused on doing a faithful conversion, so for now we
are not too concerned with trying to reduce subprocess spawns.
Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Shourya Shukla <periperidip@gmail.com> Signed-off-by: Atharva Raykar <raykar.ath@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:59 +0000 (12:15 -0400)]
Documentation: describe MIDX-based bitmaps
Update the technical documentation to describe the multi-pack bitmap
format. This patch merely introduces the new format, and describes its
high-level ideas. Git does not yet know how to read nor write these
multi-pack variants, and so the subsequent patches will:
- Introduce code to interpret multi-pack bitmaps, according to this
document.
- Then, introduce code to write multi-pack bitmaps from the 'git
multi-pack-index write' sub-command.
Finally, the implementation will gain tests in subsequent patches (as
opposed to inline with the patch teaching Git how to write multi-pack
bitmaps) to avoid a cyclic dependency.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:56 +0000 (12:15 -0400)]
pack-bitmap-write.c: free existing bitmaps
When writing a new bitmap, the bitmap writer code attempts to read the
existing bitmap (if one is present). This is done in order to quickly
permute the bits of any bitmaps for commits which appear in the existing
bitmap, and were also selected for the new bitmap.
But since this code was added in 341fa34887 (pack-bitmap-write: use
existing bitmaps, 2020-12-08), the resources associated with opening an
existing bitmap were never released.
It's fine to ignore this, but it's bad hygiene. It will also cause a
problem for the multi-pack-index builtin, which will be responsible not
only for writing bitmaps, but also for expiring any old multi-pack
bitmaps.
If an existing bitmap was reused here, it will also be expired. That
will cause a problem on platforms which require file resources to be
closed before unlinking them, like Windows. Avoid this by ensuring we
close reused bitmaps with free_bitmap_index() before removing them.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:54 +0000 (12:15 -0400)]
pack-bitmap-write.c: gracefully fail to write non-closed bitmaps
The set of objects covered by a bitmap must be closed under
reachability, since it must be the case that there is a valid bit
position assigned for every possible reachable object (otherwise the
bitmaps would be incomplete).
Pack bitmaps are never written from 'git repack' unless repacking
all-into-one, and so we never write non-closed bitmaps (except in the
case of partial clones where we aren't guaranteed to have all objects).
But multi-pack bitmaps change this, since it isn't known whether the
set of objects in the MIDX is closed under reachability until walking
them. Plumb through a bit that is set when a reachable object isn't
found.
As soon as a reachable object isn't found in the set of objects to
include in the bitmap, bitmap_writer_build() knows that the set is not
closed, and so it now fails gracefully.
A test is added in t0410 to trigger a bitmap write without full
reachability closure by removing local copies of some reachable objects
from a promisor remote.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:51 +0000 (12:15 -0400)]
pack-bitmap.c: harden 'test_bitmap_walk()' to check type bitmaps
The special `--test-bitmap` mode of `git rev-list` is used to compare
the result of an object traversal with a bitmap to check its integrity.
This mode does not, however, assert that the types of reachable objects
are stored correctly.
Harden this mode by teaching it to also check that each time an object's
bit is marked, the corresponding bit should be set in exactly one of the
type bitmaps (whose type matches the object's true type).
Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ZheNing Hu [Sun, 22 Aug 2021 13:08:41 +0000 (13:08 +0000)]
cherry-pick: use better advice message
"git cherry-pick", upon seeing a conflict, says:
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
as if running "git commit" to conclude the resolution of
this single step were the end of the story. This stems from
the fact that the command originally was to pick a single
commit and not a range of commits, and the message was
written back then and has not been adjusted.
When picking a range of commits and the command stops with a
conflict in the middle of the range, however, after
resolving the conflict and (optionally) recording the result
with "git commit", the user has to run "git cherry-pick
--continue" to have the rest of the range dealt with,
"--skip" to drop the current commit, or "--abort" to discard
the series.
Suggest use of "git cherry-pick --continue/--skip/--abort"
so that the message also covers the case where a range of
commits are being picked.
Similarly, this optimization can be applied to git revert,
suggest use of "git revert --continue/--skip/--abort" so
that the message also covers the case where a range of
commits are being reverted.
It is worth mentioning that now we use advice() to print
the content of GIT_CHERRY_PICK_HELP in print_advice(), each
line of output will start with "hint: ".
Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Hariom Verma <hariom18599@gmail.com> Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: ZheNing Hu <adlternative@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Fri, 20 Aug 2021 15:40:37 +0000 (15:40 +0000)]
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
When fast-forwarding we do not create a new commit so .git/MERGE_MSG
is not removed and can end up seeding the message of a commit made
after the rebase has finished. Avoid writing .git/MERGE_MSG when we
are fast-forwarding by writing the file after the fast-forward
checks. Note that there are no changes to the fast-forward code, it is
simply moved.
Note that the way this change is implemented means we no longer write
the author script when fast-forwarding either. I believe this is safe
for the reasons below but it is a departure from what we do when
fast-forwarding a non-merge commit. If we reword the merge then 'git
commit --amend' will keep the authorship of the commit we're rewording
as it ignores GIT_AUTHOR_* unless --reset-author is passed. It will
also export the correct GIT_AUTHOR_* variables to any hooks and we
already test the authorship of the reworded commit. If we are not
rewording then we no longer call spilt_ident() which means we are no
longer checking the commit author header looks sane. However this is
what we already do when fast-forwarding non-merge commits in
skip_unnecessary_picks() so I don't think we're breaking any promises
by not checking the author here.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Fri, 20 Aug 2021 15:40:36 +0000 (15:40 +0000)]
rebase -i: add another reword test
None of the existing reword tests check that there are no uncommitted
changes when the editor is opened. Reuse the editor script from the
last commit to fix this omission.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alexander Shopov [Sat, 21 Aug 2021 16:21:35 +0000 (18:21 +0200)]
l10n: bg.po: Updated Bulgarian translation (5230t)
Reduce warnings reported by git-po-helper to 23 which look like false
positives. Since Bulgarian uses Cyrillic we mark substitutable parts
in capitals rather than quoting with <> which saves two chars per term
(2.5% real estate on a 80 char line) plus it is safer and simpler as
the <> chars have special (sometimes destructive) meaning for the
shells. It is also easier for the user to parse. See for example
the message:
git mailinfo [<options>] <msg> <patch> < mail >info
where both <> characters serve multiple functions.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Phillip Wood [Fri, 20 Aug 2021 15:40:35 +0000 (15:40 +0000)]
rebase -r: make 'merge -c' behave like reword
If the user runs git log while rewording a commit it is confusing if
sometimes we're amending the commit that's being reworded and at other
times we're creating a new commit depending on whether we could
fast-forward or not[1]. For this reason the reword command ensures
that there are no uncommitted changes when rewording. The reword
command also allows the user to edit the todo list while the rebase is
paused. As 'merge -c' also rewords commits make it behave like reword
and add a test.
refs/files: remove unused REF_DELETING in lock_ref_oid_basic()
The lock_ref_oid_basic() function has gradually been replaced by
most callers no longer performing a low-level "acquire lock,
update and release", and instead using the ref transaction API.
So there are only 4 remaining callers of lock_ref_oid_basic().
None of those callers pass REF_DELETING anymore, the last caller went
away in 92b1551b1d (refs: resolve symbolic refs first,
2016-04-25).
Before that we'd refactored and moved this code in:
- 8df4e511387 (struct ref_update: move "have_old" into "flags",
2015-02-17)
- 7bd9bcf372d (refs: split filesystem-based refs code into a new
file, 2015-11-09)
- 165056b2fc (lock_ref_for_update(): new function, 2016-04-24)
We then finally stopped using it in 92b1551b1d (noted above). So let's
remove the handling of this parameter.
By itself this change doesn't benefit us much, but it's the start of
even more removal of unused code in and around this function in
subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs/packet: add missing BUG() invocations to reflog callbacks
In e0cc8ac8202 (packed_ref_store: make class into a subclass of
`ref_store`, 2017-06-23) a die() was added to packed_create_reflog(),
but not to any of the other reflog callbacks, let's do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 18 Aug 2021 21:36:11 +0000 (23:36 +0200)]
Makefile: remove archives before manipulating them with 'ar'
The rules creating the $(LIB_FILE) and $(XDIFF_LIB) archives used to
be:
$(QUIET_AR)$(RM) $@ && $(AR) $(ARFLAGS) $@ $^
until commit 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) removed the '$(RM) $@' part, claiming that "we can
rely on the "c" (create) being present in ARFLAGS", and (I presume)
assuming that it means that the named archive is created from scratch.
Unfortunately, that's not what the 'c' flag does, it merely "Suppress
the diagnostic message that is written to standard error by default
when the archive is created" [1]. Consequently, all object files that
are already present in an existing archive and are not replaced will
remain there. This leads to linker errors in back-to-back builds of
different revisions without a 'make clean' between them if source
files going into these archives are renamed in between:
# The last commit renaming files that go into 'libgit.a':
# bc62692757 (hash-lookup: rename from sha1-lookup, 2020-12-31)
# sha1-lookup.c => hash-lookup.c | 14 +++++++-------
# sha1-lookup.h => hash-lookup.h | 12 ++++++------
$ git checkout bc62692757^
HEAD is now at 7a7d992d0d sha1-lookup: rename `sha1_pos()` as `hash_pos()`
$ make
[...]
$ git checkout 7b76d6bf22
HEAD is now at 7b76d6bf22 Makefile: add and use the ".DELETE_ON_ERROR" flag
$ make
[...]
AR libgit.a
LINK git
/usr/bin/ld: libgit.a(hash-lookup.o): in function `bsearch_hash':
/home/szeder/src/git/hash-lookup.c:105: multiple definition of `bsearch_hash'; libgit.a(sha1-lookup.o):/home/szeder/src/git/sha1-lookup.c:105: first defined here
collect2: error: ld returned 1 exit status
make: *** [Makefile:2213: git] Error 1
Restore the original make rules to first remove $(LIB_FILE) and
$(XDIFF_LIB) and then create them from scratch to avoid these build
errors.
Takashi Iwai [Wed, 18 Aug 2021 13:27:29 +0000 (15:27 +0200)]
completion: tcsh: Fix regression by drop of wrapper functions
The cleanup of old compat wrappers in bash completion caused a
regression on tcsh completion that still uses them.
Let's update the tcsh call site as well for addressing it.
Fixes: 441ecdab37fe ("completion: bash: remove old compat wrappers") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Mon, 16 Aug 2021 09:10:25 +0000 (04:10 -0500)]
completion: bash: add correct suffix in variables
__gitcomp automatically adds a suffix, but __gitcomp_nl and others
don't, we need to specify a space by default.
Can be tested with:
git config branch.autoSetupMe<tab>
This fix only works for versions of bash greater than 4.0, before that
"local sfx" creates an empty string, therefore the unset expansion
doesn't work. The same happens in zsh.
Therefore we don't add the test for that for now.
The correct fix for all shells requires semantic changes in __gitcomp,
but that can be done later.
Cc: SZEDER Gábor <szeder.dev@gmail.com> Tested-by: David Aguilar <davvid@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Mon, 16 Aug 2021 09:10:24 +0000 (04:10 -0500)]
completion: bash: fix for multiple dash commands
Otherwise options of commands like 'for-each-ref' are not completed.
Tested-by: David Aguilar <davvid@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Mon, 16 Aug 2021 09:10:23 +0000 (04:10 -0500)]
completion: bash: fix for suboptions with value
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Mon, 16 Aug 2021 09:10:22 +0000 (04:10 -0500)]
completion: bash: fix prefix detection in branch.*
Otherwise we are completely ignoring the --cur argument.
The issue can be tested with:
git clone --config=branch.<tab>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Tested-by: David Aguilar <davvid@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
