Jeff King [Fri, 25 Oct 2019 21:20:20 +0000 (17:20 -0400)]
commit, tag: don't set parsed bit for parse failures
If we can't parse a commit, then parse_commit() will return an error
code. But it _also_ sets the "parsed" flag, which tells us not to bother
trying to re-parse the object. That means that subsequent parses have no
idea that the information in the struct may be bogus. I.e., doing this:
parse_commit(commit);
...
if (parse_commit(commit) < 0)
die("commit is broken");
will never trigger the die(). The second parse_commit() will see the
"parsed" flag and quietly return success.
There are two obvious ways to fix this:
1. Stop setting "parsed" until we've successfully parsed.
2. Keep a second "corrupt" flag to indicate that we saw an error (and
when the parsed flag is set, return 0/-1 depending on the corrupt
flag).
This patch does option 1. The obvious downside versus option 2 is that
we might continually re-parse a broken object. But in practice,
corruption like this is rare, and we typically die() or return an error
in the caller. So it's OK not to worry about optimizing for corruption.
And it's much simpler: we don't need to use an extra bit in the object
struct, and callers which check the "parsed" flag don't need to learn
about the corrupt bit, too.
There's no new test here, because this case is already covered in t5318.
Note that we do need to update the expected message there, because we
now detect the problem in the return from "parse_commit()", and not with
a separate check for a NULL tree. In fact, we can now ditch that
explicit tree check entirely, as we're covered robustly by this change
(and the previous recent change to treat a NULL tree as a parse error).
We'll also give tags the same treatment. I don't know offhand of any
cases where the problem can be triggered (it implies somebody ignoring a
parse error earlier in the process), but consistently returning an error
should cause the least surprise.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this function is passed a path with a trailing slash, it runs right
over the end of that path.
Let's fix this.
Co-authored-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first line in 'git commit-graph's usage string indicates that this
command can be invoked without specifying a subcommand. However, this
is not the case:
brian m. carlson [Mon, 28 Oct 2019 00:59:05 +0000 (00:59 +0000)]
t4044: update test to work with SHA-256
This test produces pseudo-collisions and tests git diff's behavior with
them, and is therefore sensitive to the hash in use. Update the test to
compute the collisions for both SHA-1 and SHA-256 using appropriate
constants. Move the heredocs inside the setup block so that all of the
setup code can be tested for failure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 28 Oct 2019 00:59:03 +0000 (00:59 +0000)]
t4038: abstract away SHA-1 specific constants
Compute several object IDs that exist in expected output, since we don't
care about the specific object IDs, only that the format of the output
is syntactically correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 28 Oct 2019 00:59:02 +0000 (00:59 +0000)]
t4034: abstract away SHA-1-specific constants
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Move some expected result heredocs around so
that they can use computed variables.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 28 Oct 2019 00:59:01 +0000 (00:59 +0000)]
t4027: make hash-size independent
Instead of hard-coding the length of an object ID, look this value up
using the translation tables. Similarly, compute input data for invalid
submodule entries using the tables as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 28 Oct 2019 00:58:56 +0000 (00:58 +0000)]
t1305: avoid comparing extensions
A repository using a hash other than SHA-1 will need to have an
extension in the config file. Ignore any extensions when comparing
config files, since they don't usefully contribute to the goal of the
test.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 28 Oct 2019 00:58:55 +0000 (00:58 +0000)]
rev-parse: add a --show-object-format option
Add an option to print the object format used for input, output, or
storage. This allows shell scripts to discover the hash algorithm in
use.
Since the transition plan allows for multiple input algorithms, document
that we may provide multiple results for input, and the format that the
results may take. While we don't support this now, documenting it early
means that script authors can future-proof their scripts for when we do.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Robert Luberda [Sun, 27 Oct 2019 09:14:26 +0000 (10:14 +0100)]
gitweb: correctly store previous rev in javascript-actions mode
Without this change, the setting
$feature{'javascript-actions'}{'default'} = [1];
in gitweb.conf breaks gitweb's blame page: clicking on line numbers
displayed in the second column on the page has no effect.
For comparison, with javascript-actions disabled, clicking on line
numbers loads the previous version of the line.
Addresses https://bugs.debian.org/741883.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Robert Luberda <robert@debian.org> Acked-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 24 Oct 2019 13:40:42 +0000 (13:40 +0000)]
commit-graph: fix writing first commit-graph during fetch
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Helped-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While dogfooding, Johannes found a bug in the fetch.writeCommitGraph
config behavior. His example initially happened during a clone with
--recurse-submodules, we found that this happens with the first fetch
after cloning a repository that contains a submodule:
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
In the repo I had cloned, there were really 60 commits to scan, but
only 12 were in the list to write when calling
compute_generation_numbers(). A commit in the list expects to see a
parent, but that parent is not in the list.
A follow-up will fix the bug, but first we create a test that
demonstrates the problem. This test must be careful about an existing
commit-graph file, since GIT_TEST_COMMIT_GRAPH=1 will cause the repo we
are cloning to already have one. This then prevents the incremtnal
commit-graph write during the first 'git fetch'.
Helped-by: Jeff King <peff@peff.net> Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Heba Waly [Thu, 24 Oct 2019 11:29:11 +0000 (11:29 +0000)]
documentation: remove empty doc files
Remove empty and redundant documentation files from the
Documentation/technical/ directory.
The empty doc files included only TODO messages with no documentation for
years. Instead an approach is being taken to keep all doc beside the code
in the relevant header files.
Having empty doc files is confusing and disappointing to anybody looking
for information, besides having the documentation in header files makes it
easier for developers to find the information they are looking for.
Some of the content which could have gone here already exists elsewhere:
- api-object-access.txt -> sha1-file.c and object.h have some details.
- api-quote.txt -> quote.h has some details.
- api-xdiff-interface.txt -> xdiff-interface.h has some details.
- api-grep.txt -> grep.h does not have enough documentation at the moment.
Signed-off-by: Heba Waly <heba.waly@gmail.com> Reviewed-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will cause a "unable to load config blob object", because the
fetch_config_from_gitmodules() invocation in cmd_fetch() will attempt to
load ".gitmodules" (which Git knows to exist because the client has the
tree of HEAD) while fetch_if_missing is set to 0.
fetch_if_missing is set to 0 too early - ".gitmodules" here should be
lazily fetched. Git must set fetch_if_missing to 0 before the fetch
because as part of the fetch, packfile negotiation happens (and we do
not want to fetch any missing objects when checking existence of
objects), but we do not need to set it so early. Move the setting of
fetch_if_missing to the earliest possible point in cmd_fetch(), right
before any fetching happens.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 23 Oct 2019 20:38:57 +0000 (20:38 +0000)]
repo-settings: read an int for index.version
Several config options were combined into a repo_settings struct in
ds/feature-macros, including a move of the "index.version" config
setting in 7211b9e (repo-settings: consolidate some config settings,
2019-08-13).
Unfortunately, that file looked like a lot of boilerplate and what is
clearly a factor of copy-paste overload, the config setting is parsed
with repo_config_ge_bool() instead of repo_config_get_int(). This means
that a setting "index.version=4" would not register correctly and would
revert to the default version of 3.
I caught this while incorporating v2.24.0-rc0 into the VFS for Git
codebase, where we really care that the index is in version 4.
This was not caught by the codebase because the version checks placed
in t1600-index.sh did not test the "basic" scenario enough. Here, we
modify the test to include these normal settings to not be overridden by
features.manyFiles or GIT_INDEX_VERSION. While the "default" version is
3, this is demoted to version 2 in do_write_index() when not necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 23 Oct 2019 23:32:38 +0000 (16:32 -0700)]
apply: respect merge.conflictStyle in --3way
Before, when doing a 3-way merge, the merge.conflictStyle option was not
respected and the "merge" style was always used, even if "diff3" was
specified.
Call git_xmerge_config() at the end of git_apply_config() so that the
merge.conflictStyle config is read.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 23 Oct 2019 23:32:36 +0000 (16:32 -0700)]
t4108: demonstrate bug in apply
Currently, apply does not respect the merge.conflictStyle setting.
Demonstrate this by making the 'apply with --3way' test case generic and
extending it to show that the configuration of
merge.conflictStyle = diff3 causes a breakage.
Change print_sanitized_conflicted_diff() to also sanitize `|||||||`
conflict markers.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 23 Oct 2019 23:32:33 +0000 (16:32 -0700)]
t4108: use `test_config` instead of `git config`
Since `git config` leaves the configurations set even after the test
case completes, use `test_config` instead so that the configurations are
reset once the test case finishes.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 23 Oct 2019 23:32:31 +0000 (16:32 -0700)]
t4108: remove git command upstream of pipe
Before, the output of `git diff HEAD` would always be piped to
sanitize_conflicted_diff(). However, since the Git command was upstream
of the pipe, in case the Git command fails, the return code would be
lost. Rewrite into separate statements so that the return code is no
longer lost.
Since only the command `git diff HEAD` was being piped to
sanitize_conflicted_diff(), move the command into the function and rename
it to print_sanitized_conflicted_diff().
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 23 Oct 2019 23:32:28 +0000 (16:32 -0700)]
t4108: replace create_file with test_write_lines
Since the locally defined create_file() duplicates the functionality of
the test_write_lines() helper function, remove create_file() and replace
all instances with test_write_lines(). While we're at it, move
redirection operators to the end of the command which is the more
conventional place to put it.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 24 Oct 2019 00:20:40 +0000 (02:20 +0200)]
ci: fix GCC install in the Travis CI GCC OSX job
A few days ago Travis CI updated their existing OSX images, including
the Homebrew database in the xcode10.1 OSX image that we use. Since
then installing dependencies in the 'osx-gcc' job fails when it tries
to link gcc@8:
+ brew link gcc@8
Error: No such keg: /usr/local/Cellar/gcc@8
GCC8 is still installed but not linked to '/usr/local' in the updated
image, as it was before this update, but now we have to link it by
running 'brew link gcc'. So let's do that then, and fall back to
linking gcc@8 if it doesn't, just to be sure.
Our builds on Azure Pipelines are unaffected by this issue. The OSX
image over there doesn't contain the gcc@8 package, so we have to
'brew install' it, which already takes care of linking it to
'/usr/local'. After that the 'brew link gcc' command added by this
patch fails, but the ||-chained fallback 'brew link gcc@8' command
succeeds with an "already linked" warning.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Heba Waly [Wed, 23 Oct 2019 05:30:52 +0000 (05:30 +0000)]
config: move documentation to config.h
Move the documentation from Documentation/technical/api-config.txt into
config.h as it's easier for the developers to find the usage information
beside the code instead of looking for it in another doc file, also
documentation/technical/api-config.txt is removed because the information
it has is now redundant and it'll be hard to keep it up to date and
syncronized with the documentation in config.h
Signed-off-by: Heba Waly <heba.waly@gmail.com> Reviewed-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 23 Oct 2019 05:43:11 +0000 (14:43 +0900)]
Merge branch 'cb/pcre2-chartables-leakfix'
Leakfix.
* cb/pcre2-chartables-leakfix:
grep: avoid leak of chartables in PCRE2
grep: make PCRE2 aware of custom allocator
grep: make PCRE1 aware of custom allocator
SZEDER Gábor [Mon, 21 Oct 2019 16:00:43 +0000 (18:00 +0200)]
path.c: don't call the match function without value in trie_find()
'logs/refs' is not a working tree-specific path, but since commit b9317d55a3 (Make sure refs/rewritten/ is per-worktree, 2019-03-07)
'git rev-parse --git-path' has been returning a bogus path if a
trailing '/' is present:
We use a trie data structure to efficiently decide whether a path
belongs to the common dir or is working tree-specific. As it happens b9317d55a3 triggered a bug that is as old as the trie implementation
itself, added in 4e09cf2acf (path: optimize common dir checking,
2015-08-31).
- According to the comment describing trie_find(), it should only
call the given match function 'fn' for a "/-or-\0-terminated
prefix of the key for which the trie contains a value". This is
not true: there are three places where trie_find() calls the match
function, but one of them is missing the check for value's
existence.
- b9317d55a3 added two new keys to the trie: 'logs/refs/rewritten'
and 'logs/refs/worktree', next to the already existing
'logs/refs/bisect'. This resulted in a trie node with the path
'logs/refs/', which didn't exist before, and which doesn't have a
value attached. A query for 'logs/refs/' finds this node and then
hits that one callsite of the match function which doesn't check
for the value's existence, and thus invokes the match function
with NULL as value.
- When the match function check_common() is invoked with a NULL
value, it returns 0, which indicates that the queried path doesn't
belong to the common directory, ultimately resulting the bogus
path shown above.
Add the missing condition to trie_find() so it will never invoke the
match function with a non-existing value. check_common() will then no
longer have to check that it got a non-NULL value, so remove that
condition.
I believe that there are no other paths that could cause similar bogus
output. AFAICT the only other key resulting in the match function
being called with a NULL value is 'co' (because of the keys 'common'
and 'config'). However, as they are not in a directory that belongs
to the common directory the resulting working tree-specific path is
expected.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 21 Oct 2019 16:00:42 +0000 (18:00 +0200)]
path.c: clarify two field names in 'struct common_dir'
An array of 'struct common_dir' instances is used to specify whether
various paths in $GIT_DIR are specific to a worktree, or are common,
i.e. belong to main worktree. The names of two fields in this
struct are somewhat confusing or ambigious:
- The path is recorded in the struct's 'dirname' field, even though
several entries are regular files e.g. 'gc.pid', 'packed-refs',
etc.
Rename this field to 'path' to reduce confusion.
- The field 'exclude' tells whether the path is excluded... from
where? Excluded from the common dir or from the worktree? It
means the former, but it's ambigious.
Rename this field to 'is_common' to make it unambigious what it
means. This, however, means the exact opposite of what 'exclude'
meant, so we have to negate the field's value in all entries as
well.
The diff is best viewed with '--color-words'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 21 Oct 2019 16:00:41 +0000 (18:00 +0200)]
path.c: mark 'logs/HEAD' in 'common_list' as file
'logs/HEAD', i.e. HEAD's reflog, is a file, but its entry in
'common_list' has the 'is_dir' bit set.
Unset that bit to make it consistent with what 'logs/HEAD' is supposed
to be.
This doesn't make a difference in behavior: check_common() is the only
function that looks at the 'is_dir' bit, and that function either
returns 0, or '!exclude', which for 'logs/HEAD' results in 0 as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 21 Oct 2019 16:00:40 +0000 (18:00 +0200)]
path.c: clarify trie_find()'s in-code comment
A fairly long comment describes trie_find()'s behavior and shows
examples, but it's slightly incomplete/inaccurate. Update this
comment to specify how trie_find() handles a negative return value
from the given match function.
Furthermore, update the list of examples to include not only two but
three levels of path components. This makes the examples slightly
more complicated, but it can illustrate the behavior in more corner
cases.
Finally, basically everything refers to the data stored for a key as
"value", with two confusing exceptions:
- The type definition of the match function calls its corresponding
parameter 'data'.
Rename that parameter to 'value'. (check_common(), the only
function of this type already calls it 'value').
- The table of examples above trie_find() has a "val from node"
column, which has nothing to do with the value stored in the trie:
it's a "prefix of the key for which the trie contains a value"
that led to that node.
Rename that column header to "prefix to node".
Note that neither the original nor the updated description and
examples correspond 100% to the current implementation, because the
implementation is a bit buggy, but the comment describes the desired
behavior. The bug will be fixed in the last patch of this series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 21 Oct 2019 16:00:39 +0000 (18:00 +0200)]
Documentation: mention more worktree-specific exceptions
If a directory in $GIT_DIR is overridden when $GIT_COMMON_DIR is set,
then usually all paths within that directory are overridden as well.
There are a couple of exceptions, though, and two of them, namely
'refs/rewritten' and 'logs/HEAD' are not mentioned in
'gitrepository-layout'. Document them as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
William Baker [Mon, 21 Oct 2019 18:40:03 +0000 (18:40 +0000)]
multi-pack-index: add [--[no-]progress] option.
Add the --[no-]progress option to git multi-pack-index.
Pass the MIDX_PROGRESS flag to the subcommand functions
when progress should be displayed by multi-pack-index.
The progress feature was added to 'verify' in 144d703
("multi-pack-index: report progress during 'verify'", 2018-09-13)
but some subcommands were not updated to display progress, and
the ability to opt-out was overlooked.
Signed-off-by: William Baker <William.Baker@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
William Baker [Mon, 21 Oct 2019 18:39:58 +0000 (18:39 +0000)]
midx: add MIDX_PROGRESS flag
Add the MIDX_PROGRESS flag and update the
write|verify|expire|repack functions in midx.h
to accept a flags parameter. The MIDX_PROGRESS
flag indicates whether the caller of the function
would like progress information to be displayed.
This patch only changes the method prototypes
and does not change the functionality. The
functionality change will be handled by a later patch.
Signed-off-by: William Baker <William.Baker@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Azure Pipelines builds are failing for macOS due to a change in the
location of the perforce cask. The command outputs the following error:
+ brew install caskroom/cask/perforce
Error: caskroom/cask was moved. Tap homebrew/cask-cask instead.
So let's try to call `brew cask install perforce` first (which is what
that error message suggests, in a most round-about way).
Prior to 672f51cb we used to install the 'perforce' package with 'brew
install perforce' (note: no 'cask' in there). The justification for 672f51cb was that the command 'brew install perforce' simply stopped
working, after Homebrew folks decided that it's better to move the
'perforce' package to a "cask". Their justification for this move was
that 'brew install perforce' "can fail due to a checksum mismatch ...",
and casks can be installed without checksum verification. And indeed,
both 'brew cask install perforce' and 'brew install
caskroom/cask/perforce' printed something along the lines of:
==> No checksum defined for Cask perforce, skipping verification
It is unclear why 672f51cb used 'brew install caskroom/cask/perforce'
instead of 'brew cask install perforce'. It appears (by running both
commands on old Travis CI macOS images) that both commands worked all
the same already back then.
In any case, as the error message at the top of this commit message
shows, 'brew install caskroom/cask/perforce' has stopped working
recently, but 'brew cask install perforce' still does, so let's use
that.
CI servers are typically fresh virtual machines, but not always. To
accommodate for that, let's try harder if `brew cask install perforce`
fails, by specifically pulling the latest `master` of the
`homebrew-cask` repository.
This will still fail, of course, when `homebrew-cask` falls behind
Perforce's release schedule. But once it is updated, we can now simply
re-run the failed jobs and they will pick up that update.
As for updating `homebrew-cask`: the beginnings of automating this in
https://dev.azure.com/gitgitgadget/git/_build?definitionId=11&_a=summary
will be finished once the next Perforce upgrade comes around.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 22 Oct 2019 21:22:51 +0000 (21:22 +0000)]
t604[236]: do not run setup in separate tests
Transform the setup "tests" to setup functions, and have the actual
tests call the setup functions. Advantages:
* Should make life easier for people working with webby CI/PR builds
who have to abuse mice (and their own index finger as well) in
order to switch from viewing one testcase to another. Sounds
awful; hopefully this will improve things for them.
* Improves re-runnability: any failed test in any of these three
files can now be re-run in isolation, e.g.
./t6042* --ver --imm -x --run=21
whereas before it would require two tests to be specified to the
--run argument, the other needing to be picked out as the relevant
setup test from one or two tests before.
* Importantly, this still keeps the "setup" and "test" sections
somewhat separate to make it easier for readers to discern what is
just ancillary setup and what the intent of the test is.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 22 Oct 2019 21:22:50 +0000 (21:22 +0000)]
merge-recursive: fix merging a subdirectory into the root directory
We allow renaming all entries in e.g. a directory named z/ into a
directory named y/ to be detected as a z/ -> y/ rename, so that if the
other side of history adds any files to the directory z/ in the mean
time, we can provide the hint that they should be moved to y/.
There is no reason to not allow 'y/' to be the root directory, but the
code did not handle that case correctly. Add a testcase and the
necessary special checks to support this case.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 22 Oct 2019 21:22:49 +0000 (21:22 +0000)]
merge-recursive: clean up get_renamed_dir_portion()
Dscho noted a few things making this function hard to follow.
Restructure it a bit and add comments to make it easier to follow. The
restructurings include:
* There was a special case if-check at the end of the function
checking whether someone just renamed a file within its original
directory, meaning that there could be no directory rename involved.
That check was slightly convoluted; it could be done in a more
straightforward fashion earlier in the function, and can be done
more cheaply too (no call to strncmp).
* The conditions for advancing end_of_old and end_of_new before
calling strchr were both confusing and unnecessary. If either
points at a '/', then they need to be advanced in order to find the
next '/'. If either doesn't point at a '/', then advancing them one
char before calling strchr() doesn't hurt. So, just rip out the
if conditions and advance both before calling strchr().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 23 Oct 2019 02:26:37 +0000 (11:26 +0900)]
doc: am --show-current-patch gives an entire e-mail message
The existing wording gives an impression that it only gives the
contents of the $GIT_DIR/rebase-apply/patch file, i.e. the patch
proper, but the option actually emits the entire e-mail message
being processed (iow, one of the output files from "git mailsplit").
Denton Liu [Tue, 22 Oct 2019 09:57:01 +0000 (02:57 -0700)]
t7419: change test_must_fail to ! for grep
According to t/README, test_must_fail() should only be used to test for
failure in Git commands. Replace the invocations of
`test_must_fail grep` with `! grep`.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bert Wesarg [Mon, 21 Oct 2019 13:23:42 +0000 (15:23 +0200)]
t4014: make output-directory tests self-contained
As noted by Gábor in [1], the new tests in edefc31873 ("format-patch:
create leading components of output directory", 2019-10-11) cannot be
run independently. Fix this.
ci(visual-studio): actually run the tests in parallel
Originally, the CI/PR builds that build and test using Visual Studio
were implemented imitating `linux-clang`, i.e. still using the
`Makefile`-based build infrastructure.
Later (but still before the patches made their way into git.git's
`master`), however, this was changed to generate Visual Studio project
files and build the binaries using `MSBuild`, as this reflects more
accurately how Visual Studio users would want to build Git (internally,
Visual Studio uses `MSBuild`, or at least something very similar).
During that transition, we needed to implement a new way to run the test
suite in parallel, as Visual Studio users typically will only have a Git
Bash available (which does not ship with `make` nor with support for
`prove`): we simply implemented a new test helper to run the test suite.
This helper even knows how to run the tests in parallel, but due to a
mistake on this developer's part, it was never turned on in the CI/PR
builds. This results in 2x-3x longer run times of the test phase.
Let's use the `--jobs=10` option to fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ci(visual-studio): use strict compile flags, and optimization
To make full use of the work that went into the Visual Studio build &
test jobs in our CI/PR builds, let's turn on strict compiler flags. This
will give us the benefit of Visual C's compiler warnings (which, at
times, seem to catch things that GCC does not catch, and vice versa).
While at it, also turn on optimization; It does not make sense to
produce binaries with debug information, and we can use any ounce of
speed that we get (because the test suite is particularly slow on
Windows, thanks to the need to run inside a Unix shell, which
requires us to use the POSIX emulation layer provided by MSYS2).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Sun, 20 Oct 2019 18:52:30 +0000 (11:52 -0700)]
userdiff: fix some corner cases in dts regex
While reviewing some dts diffs recently I noticed that the hunk header
logic was failing to find the containing node. This is because the regex
doesn't consider properties that may span multiple lines, i.e.
property = <something>,
<something_else>;
and it got hung up on comments inside nodes that look like the root node
because they start with '/*'. Add tests for these cases and update the
regex to find them. Maybe detecting the root node is too complicated but
forcing it to be a backslash with any amount of whitespace up to an open
bracket seemed OK. I tried to detect that a comment is in-between the
two parts but I wasn't happy so I just dropped it.
Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hariom Verma [Thu, 17 Oct 2019 17:46:51 +0000 (17:46 +0000)]
builtin/blame.c: constants into bit shift format
We are looking at bitfield constants, and elsewhere in the Git source
code, such cases are handled via bit shift operators rather than octal
numbers, which also makes it easier to spot holes in the range
(if, say, 1<<5 was missing, it is easier to spot it between 1<<4
and 1<<6 than it is to spot a missing 040 between a 020 and a 0100).
Signed-off-by: Hariom Verma <hariom18599@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Fri, 18 Oct 2019 23:55:56 +0000 (16:55 -0700)]
rebase: hide --preserve-merges option
Since --preserve-merges has been deprecated in favour of
--rebase-merges, mark this option as hidden so it no longer shows up in
the usage and completions.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Sun, 20 Oct 2019 11:03:06 +0000 (12:03 +0100)]
Doc: Bundle file usage
Improve the command description, including paragraph spacing.
Git URLs can accept bundle files for fetch, pull and clone, include
in that section. Include git clone in the bundle usage description.
Correct the quoting of <git-rev-list-args>.
Detail the <git-rev-list-args> options for cloning a complete repo.
Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 18 Oct 2019 04:45:35 +0000 (00:45 -0400)]
parse_tag_buffer(): treat NULL tag pointer as parse error
When parsing a tag, we may end up with a NULL "tagged" field when
there's a type mismatch (e.g., the tag claims to point to object X as a
commit, but we previously saw X as a blob in the same process), but we
do not otherwise indicate a parse failure to the caller.
This is similar to the case discussed in the previous commit, where a
commit could end up with a NULL tree field: while slightly convenient
for callers who want to overlook a corrupt object, it means that normal
callers have to explicitly deal with this case (rather than just relying
on the return code from parsing). And most don't, leading to segfault
fixes like the one in c77722b3ea (use get_tagged_oid(), 2019-09-05).
Let's address this more centrally, by returning an error code from the
parse itself, which most callers would already notice (adventurous
callers are free to ignore the error and continue looking at the
struct).
This also covers the case where the tag contains a nonsensical "type"
field (there we produced a user-visible error but still returned success
to the caller; now we'll produce a slightly better message and return an
error).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 18 Oct 2019 04:43:29 +0000 (00:43 -0400)]
parse_commit_buffer(): treat lookup_tree() failure as parse error
If parsing a commit yields a valid tree oid, but we've seen that same
oid as a non-tree in the same process, the resulting commit struct will
end up with a NULL tree pointer, but not otherwise report a parsing
failure.
That's perhaps convenient for callers which want to operate on even
partially corrupt commits (e.g., by still looking at the parents). But
it leaves a potential trap for most callers, who now have to manually
check for a NULL tree. Most do not, and it's likely that there are
possible segfaults lurking. I say "possible" because there are many
candidates, and I don't think it's worth following through on
reproducing them when we can just fix them all in one spot. And
certainly we _have_ seen real-world cases, such as the one fixed by 806278dead (commit-graph.c: handle corrupt/missing trees, 2019-09-05).
Note that we can't quite drop the check in the caller added by that
commit yet, as there's some subtlety with repeated parsings (which will
be addressed in a future commit).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 18 Oct 2019 04:42:13 +0000 (00:42 -0400)]
parse_commit_buffer(): treat lookup_commit() failure as parse error
While parsing the parents of a commit, if we are able to parse an actual
oid but lookup_commit() fails on it (because we previously saw it in
this process as a different object type), we silently omit the parent
and do not report any error to the caller.
The caller has no way of knowing this happened, because even an empty
parent list is a valid parse result. As a result, it's possible to fool
our "rev-list" connectivity check into accepting a corrupted set of
objects.
There's a test for this case already in t6102, but unfortunately it has
a slight error. It creates a broken commit with a parent line pointing
to a blob, and then checks that rev-list notices the problem in two
cases:
1. the "lone" case: we traverse the broken commit by itself (here we
try to actually load the blob from disk and find out that it's not
a commit)
2. the "seen" case: we parse the blob earlier in the process, and then
when calling lookup_commit() we realize immediately that it's not a
commit
The "seen" variant for this test mistakenly parsed another commit
instead of the blob, meaning that we were actually just testing the
"lone" case again. Changing that reveals the breakage (and shows that
this fixes it).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason for that bogus value is that '--total's parameter is parsed
via parse-options's OPT_INTEGER into a uint64_t variable [1], so the
two bits of 3 end up in the "wrong" bytes on big-endian systems
(12884901888 = 0x300000000).
Change the type of that variable from uint64_t to int, to match what
parse-options expects; in the tests of the progress output we won't
use values that don't fit into an int anyway.
[1] start_progress() expects the total number as an uint64_t, that's
why I chose the same type when declaring the variable holding the
value given on the command line.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
[jpag: Debian unstable/ppc64 (big-endian)] Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
[tz: Fedora s390x (big-endian)] Tested-By: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maxim Belsky [Fri, 11 Oct 2019 17:54:28 +0000 (10:54 -0700)]
completion: clarify installation instruction for zsh
The original comment does not describe type of ~/.zsh/_git explicitly
and zsh does not warn or fail if a user create it as a dictionary.
So unexperienced users could be misled by the original comment.
There is a small update to clarify it.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Maxim Belsky <public.belsky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) introduced
a small memory leak visible with valgrind in t7813.
Complete the creation of a PCRE2 specific variable that was missing from
the original change and free the generated table just like it is done
for PCRE1.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
94da9193a6 (grep: add support for PCRE v2, 2017-06-01) didn't include
a way to override the system allocator, and so it is incompatible with
custom allocators (e.g. nedmalloc). This problem became obvious when we
tried to plug a memory leak by `free()`ing a data structure allocated by
PCRE2, triggering a segfault in Windows (where we use nedmalloc by
default).
PCRE2 requires the use of a general context to override the allocator
and therefore, there is a lot more code needed than in PCRE1, including
a couple of wrapper functions.
Extend the grep API with a "destructor" that could be called to cleanup
any objects that were created and used globally.
Update `builtin/grep.c` to use that new API, but any other future users
should make sure to have matching `grep_init()`/`grep_destroy()` calls
if they are using the pattern matching functionality.
Move some of the logic that was before done per thread (in the workers)
into an earlier phase to avoid degrading performance, but as the use of
PCRE2 with custom allocators is better understood it is expected more of
its functions will be instructed to use the custom allocator as well as
was done in the original code[1] this work was based on.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) didn't include a way
to override the system alocator, and so it is incompatible with
USE_NED_ALLOCATOR as reported by Dscho[1] (in similar code from PCRE2)
Note that nedmalloc, as well as other custom allocators like jemalloc
and mi-malloc, can be configured at runtime (via `LD_PRELOAD`),
therefore we cannot know at compile time whether a custom allocator is
used or not.
Make the minimum change possible to ensure this combination is supported
by extending `grep_init()` to set the PCRE1 specific functions to Git's
idea of `malloc()` and `free()` and therefore making sure all
allocations are done inside PCRE1 with the same allocator than the rest
of Git.
This change has negligible performance impact: PCRE needs to allocate
memory once per program run for the character table and for each pattern
compilation. These are both rare events compared to matching patterns
against lines. Actual measurements[2] show that the impact is lost in
the noise.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes: fix minimum number of parameters to "copy" subcommand
The builtin/notes.c::copy() function is prepared to handle either
one or two arguments given from the command line; when one argument
is given, to-obj defaults to HEAD.
bbb1b8a3 ("notes: check number of parameters to "git notes copy"",
2010-06-28) tried to make sure "git notes copy" (with *no* other
argument) does not dereference NULL by checking the number of
parameters, but it incorrectly insisted that we need two arguments,
instead of either one or two. This disabled the defaulting to-obj
to HEAD.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3301: test diagnose messages for too few/many paramters
Commit bbb1b8a35a ("notes: check number of parameters to "git notes
copy"", 2010-06-28) added a test for too many or too few of
parameters provided to `git notes copy'.
However, the test only ensures that the command will fail but it
doesn't really check if it fails because of number of parameters.
If we accidentally lifted the check inside our code base, the test
may still have failed because the provided parameter is not a valid
ref.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Wed, 16 Oct 2019 23:45:34 +0000 (23:45 +0000)]
remote-curl: pass on atomic capability to remote side
When pushing more than one reference with the --atomic option, the
server is supposed to perform a single atomic transaction to update the
references, leaving them either all to succeed or all to fail. This
works fine when pushing locally or over SSH, but when pushing over HTTP,
we fail to pass the atomic capability to the remote side. In fact, we
have not reported this capability to any remote helpers during the life
of the feature.
Now normally, things happen to work nevertheless, since we actually
check for most types of failures, such as non-fast-forward updates, on
the client side, and just abort the entire attempt. However, if the
server side reports a problem, such as the inability to lock a ref, the
transaction isn't atomic, because we haven't passed the appropriate
capability over and the remote side has no way of knowing that we wanted
atomic behavior.
Fix this by passing the option from the transport code through to remote
helpers, and from the HTTP remote helper down to send-pack. With this
change, we can detect if the server side rejects the push and report
back appropriately. Note the difference in the messages: the remote
side reports "atomic transaction failed", while our own checking rejects
pushes with the message "atomic push failed".
Document the atomic option in the remote helper documentation, so other
implementers can implement it if they like.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
