Lorenzo Bianconi [Thu, 30 Apr 2026 08:47:38 +0000 (10:47 +0200)]
net: airoha: configure QoS channel for HW accelerated flowtable traffic
As done for the SW path, configure the QoS channel for HW accelerated
traffic according to the user port index when forwarding to a DSA port,
or rely on the GDM port identifier otherwise. This allows HTB shaping
to be applied to HW accelerated traffic.
Alex Cheema [Wed, 29 Apr 2026 17:57:39 +0000 (18:57 +0100)]
net: usb: cdc_ncm: add Apple Mac USB-C direct networking quirk
Apple Silicon Macs expose two CDC NCM "private" data interfaces over
USB-C with VID:PID 0x05ac:0x1905 and product string "Mac". This is the
same protocol Apple already ships on iPhone (0x05ac:0x12a8) and iPad
(0x05ac:0x12ab) for RemoteXPC since iOS 17 -- both data interfaces lack
an interrupt status endpoint, so they rely on the FLAG_LINK_INTR-
conditional bind path introduced in commit 3ec8d7572a69 ("CDC-NCM: add
support for Apple's private interface").
The id_table currently has entries for iPhone and iPad but not for the
Mac. Without a match, cdc_ncm falls through to the generic CDC NCM
class-match entry, which uses the FLAG_LINK_INTR-having cdc_ncm_info
struct, so bind_common() fails on the missing status endpoint and no
netdev appears.
Add id_table entries for both interface numbers (0 and 2) of the Mac,
bound to the existing apple_private_interface_info driver_info.
Verified empirically on a Mac Studio M3 Ultra running macOS 26.5: when
a Mac is connected via USB-C, ioreg shows VID 0x05ac, PID 0x1905,
product string "Mac", with two NCM data interfaces at numbers 0 and 2.
The same PID is presented by all current Apple Silicon Mac models
(MacBook Pro/Air, Mac mini, Mac Studio across the M-series), mirroring
Apple's single-PID-per-family pattern from iPhone/iPad.
After this patch, plugging a Mac into a Linux host running the patched
kernel produces two enx... interfaces (one per data interface),
"ip -br link" lists them as UP, and standard userspace networking
(DHCP, NetworkManager shared mode, etc.) works without any modprobe
overrides or out-of-tree modules.
selftests: drv-net: Enable ntuple-filters if supported
Certain devices which support ntuple-filters do not enable the feature
by default. The existing tests will skip (if they check for the feature),
or fail if they blindly attempt to install rules. Therefore, attempt to turn
on ntuple-filters if the device supports them.
On Ethernet devices (the overwhelming majority of SR-IOV NICs)
dev->addr_len is 6, so only the first 6 bytes of broadcast[] are
written. The remaining 26 bytes retain whatever was previously on
the kernel stack. The full struct is then handed to userspace via:
leaking up to 26 bytes of uninitialised kernel stack per VF per
RTM_GETLINK request, repeatable.
The other vf_* structs in the same function are explicitly zeroed
for exactly this reason - see the memset() calls for ivi,
vf_vlan_info, node_guid and port_guid a few lines above.
vf_broadcast was simply missed when it was added.
Reachability: any unprivileged local process can open AF_NETLINK /
NETLINK_ROUTE without capabilities and send RTM_GETLINK with an
IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks
each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per
VF per request. Stack residue at this call site can include return
addresses and transient sensitive data; KASAN with stack
instrumentation, or KMSAN, will flag the nla_put() when reproduced.
Zero the on-stack struct before the partial memcpy, matching the
existing pattern used for the other vf_* structs in the same
function.
Eric Dumazet [Thu, 30 Apr 2026 07:40:04 +0000 (07:40 +0000)]
ip6mr: plug drop_reason to ip6mr_cache_report()
- Check mrt->mroute_sk earlier in the function.
- Use sock_queue_rcv_skb_reason() instead of sock_queue_rcv_skb().
- Use sk_skb_reason_drop() instead of kfree_skb().
Note that we return -ENOMEM if sock_queue_rcv_skb_reason() failed,
as the precise error is not really needed for callers.
Eric Dumazet [Thu, 30 Apr 2026 07:06:11 +0000 (07:06 +0000)]
ipmr: prevent info-leak in pmr_cache_report()
Yiming Qian reported:
<quote>
ipmr_cache_report()` allocates a report skb with `alloc_skb(128,
GFP_ATOMIC)` and appends a `struct igmphdr` using `skb_put()`. In the
non-`IGMPMSG_WHOLEPKT` path it initializes only:
- `igmp->type`
- `igmp->code`
but does not initialize:
- `igmp->csum`
- `igmp->group`
Later, `igmpmsg_netlink_event()` copies the bytes after `sizeof(struct
igmpmsg)` into the `IPMRA_CREPORT_PKT` netlink attribute and emits
`RTM_NEWCACHEREPORT` on `RTNLGRP_IPV4_MROUTE_R`.
As a result, 6 bytes of stale heap data from the skb head are
disclosed to userspace.
</quote>
Let's use skb_put_zero() instead of skb_put() to fix this bug.
Linus Torvalds [Fri, 1 May 2026 23:56:08 +0000 (16:56 -0700)]
Merge tag 'drm-fixes-2026-05-02' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Fixes for rc2, the usual amdgpu/xe double header, I think xe had a
couple of weeks combined due to some maintainer access issues,
otherwise there's just a few misc fixes and documentation fixups.
core and helpers:
- calculate framebuffer geometry with format helpers
- fix docs
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
xe:
- uapi: Add missing pad and extensions check
- uapi: Reject unsafe PAT indices for CPU cached memory
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge
- Xe3p tuning and workaround fixes
- USE drm mm instead of drm SA for CCS read/write
- Fix leaks and null derefs
- Fix Wa_18022495364
appletbdrm:
- allocate protocol buffers with kvzalloc()
dma-buf:
- fix docs
imagination:
- avoid segfault in debugfs
ofdrm:
- put PCI device reference on errors
udl:
- increase USB timeout"
* tag 'drm-fixes-2026-05-02' of https://gitlab.freedesktop.org/drm/kernel: (77 commits)
drm/xe/uapi: Reject coh_none PAT index for CPU_ADDR_MIRROR
drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
drm/xe/xelp: Fix Wa_18022495364
drm/xe/gsc: Fix BO leak on error in query_compatibility_version()
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
drm/xe: Fix potential NULL deref in xe_exec_queue_tlb_inval_last_fence_put_unlocked
drm/xe/vf: Use drm mm instead of drm sa for CCS read/write
drm/xe: Add memory pool with shadow support
drm/xe/debugfs: Correct printing of register whitelist ranges
drm/xe: Mark ROW_CHICKEN5 as a masked register
drm/xe/tuning: Use proper register offset for GAMSTLB_CTRL
drm/xe/xe3p_lpg: Add missing indirect ring state feature flag
drm/xe: Drop redundant rtp entries for Wa_14019988906 & Wa_14019877138
drm/xe/vm: Add missing pad and extensions check
drm/xe: Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge()
...
The TRENDnet TUC-ET2G V2.0 is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Birger Koblitz <mail@birger-koblitz.de> Link: https://patch.msgid.link/20260430213435.21821-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/Space.c is the last remnant of the linux-2.4.x driver model
that required each subsystem and device driver init function to be called
from init/main.c explicitly, before the introduction of initcall levels.
In linux-7.0, this was only used for a handful of ISA network drivers,
with the ne2000 driver being the last one.
Fold the code into ne.c directly, with minimal changes to preserve
the existing command line parsing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260429145624.2948432-2-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cs89x0 driver is really two in one, and they are mutually exclusive:
- the ISA driver was used on 486-era PCs. It likely has no remaining
users, like the other ethernet drivers that got removed in
linux-7.1. The DMA support in here is the last device driver use of
the deprecated isa_bus_to_virt() interface, all other users are either
x86 specific or or got converted to the normal dma-mapping interface.
The driver was maintained by Andrew Morton at the time, based on
the linux-2.2 vendor driver from Cirrus Logic.
- the platform_driver instance was used on some embedded Arm boards
around the same time, such as the EP7211 Development Kit. This
is the same chip, but uses modern devicetree based probing and no DMA.
This was added by Alexander Shiyan.
Remove the ISA driver as a cleanup, including all of the outdated
documentation referring to its configuration.
Jakub Kicinski [Wed, 29 Apr 2026 21:30:01 +0000 (14:30 -0700)]
net: tls: reshuffle the device ops check
We try to validate during registration that the netdev
has ops if it has features. This is currently somewhat sillily
written because we have a dereference before a NULL check
on the ops struct. Straighten this out.
No functional change intended other than saving ourselves
the very theoretical crash with a bad driver.
Note that we check earlier in the function that either ops
or TLS features are set for the device in question.
Jakub Kicinski [Fri, 1 May 2026 23:45:41 +0000 (16:45 -0700)]
Merge tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Replace skb_try_make_writable() by skb_ensure_writable() in
nft_fwd_netdev and the flowtable to deal with uncloned packets
having their network header in paged fragments.
2) Drop packet if output device does not exist and ensure sufficient
headroom in nft_fwd_netdev before transmitting the skb.
3) Use the existing dup recursion counter in nft_fwd_netdev for the
neigh_xmit variant, from Weiming Shi.
4) Add .check_hooks interface to x_tables to detach the control plane
hook check based on the match/target configuration. Then, update
nft_compat to use .check_hooks from .validate path, this fixes a
lack of hook validation for several match/targets.
5) Fix incorrect .usersize in xt_CT, from Florian Westphal.
6) Fix a memleak with netdev tables in dormant state,
from Florian Westphal.
7) Several patches to check if the packet is a fragment, then skip
layer 4 inspection, for x_tables and nf_tables; as well as common
nf_socket infrastructure. The xt_hashlimit match drops fragments
to stay consistent with the existing approach when failing to parse
the layer 4 protocol header.
8) Ensure sufficient headroom in the flowtable before transmitting
the skb.
9) Fix the flowtable inline vlan approach for double-tagged vlan:
Reverse the iteration over .encap[] since it represents the
encapsulation as seen from the ingress path. Postpone pushing
layer 2 header so output device is available to calculate needed
headroom. Finally, add and use nf_flow_vlan_push() to fix it.
10) Fix flowtable inline pppoe with GSO packets. Moreover, use
FLOW_OFFLOAD_XMIT_DIRECT to fill up destination hardware
address since neighbour cache does not exist in pppoe.
11) Use skb_pull_rcsum() to decapsulate vlan and pppoe headers, for
double-tagged vlan in particular this should provide some benefits
in certain scenarios.
More notes regarding 9-11):
- sashiko is also signalling to use it for IPIP headers, but that needs
more adjustments such setting skb->protocol after removing the IPIP
header, will follow up in a separated patch.
- I plan to submit selftests to cover double-tagged-vlan. As for pppoe,
it should be possible but that would mandate a few userspace dependencies.
This has been semi-automatically tested by me and reporters describing
broken double-vlan-tagged and pppoe currently in the flowtable.
* tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: use skb_pull_rcsum() to pop vlan/pppoe header
netfilter: flowtable: fix inline pppoe encapsulation in xmit path
netfilter: flowtable: fix inline vlan encapsulation in xmit path
netfilter: flowtable: ensure sufficient headroom in xmit path
netfilter: xtables: fix L4 header parsing for non-first fragments
netfilter: nf_tables: skip L4 header parsing for non-first fragments
netfilter: nf_socket: skip socket lookup for non-first fragments
netfilter: nf_tables: fix netdev hook allocation memleak with dormant tables
netfilter: xt_CT: fix usersize for v1 and v2 revision
netfilter: nft_compat: run xt_check_hooks_{match,target}() from .validate
netfilter: x_tables: add .check_hooks to matches and targets
netfilter: nft_fwd_netdev: use recursion counter in neigh egress path
netfilter: nft_fwd_netdev: add device and headroom validate with neigh forwarding
netfilter: replace skb_try_make_writable() by skb_ensure_writable()
====================
Linus Torvalds [Fri, 1 May 2026 23:32:42 +0000 (16:32 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid writing an uninitialised stack variable to POR_EL0 on sigreturn
if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Preserve POR_EL0 if poe_context is missing
arm64: Reserve an extra page for early kernel mapping
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
ACPI: arm64: cpuidle: Tolerate platforms with no deep PSCI idle states
arm64/irqflags: __always_inline the arch_local_irq_*() helpers
arm64/scs: Fix potential sign extension issue of advance_loc4
Yi Kuo [Wed, 29 Apr 2026 10:00:11 +0000 (18:00 +0800)]
smb: smbdirect: fix MR registration for coalesced SG lists
ib_dma_map_sg() modifies the provided scatterlist and returns the
number of mapped entries, which can be fewer than the requested
mr->sgt.nents if the DMA controller coalesces contiguous memory
segments. Passing the original, uncoalesced count to ib_map_mr_sg()
causes memory registration failures if coalescing actually occurs.
Capture the actual mapped count returned by ib_dma_map_sg() and pass it
to ib_map_mr_sg() to ensure correct MR registration.
Also update the ib_dma_map_sg() error logging to drop the error
pointer formatting, since the return value is an integer count
rather than an error code.
Ensure a proper error code (-EIO) is assigned when DMA mapping or
MR registration fails.
Fixes: de5ef8ec3c46 ("smb: smbdirect: introduce smbdirect_mr.c with client mr code") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221408 Reviewed-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Yi Kuo <yi@yikuo.dev> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: smbdirect: introduce and use include/linux/smbdirect.h
This makes it easier to rebuild cifs.ko and ksmbd.ko against
a running kernel.
Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/linux-cifs/aehrPuY60VMcYGU8@infradead.org/ Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: smbdirect: make use of DEFAULT_SYMBOL_NAMESPACE and EXPORT_SYMBOL_GPL
This is a better solution than
EXPORT_SYMBOL_FOR_MODULES(__sym, "cifs,ksmbd") as it makes
it possible to rebuild smbdirect.ko against a
running kernel and then load the existing cifs.ko and ksmbd.ko
from the running kernel.
Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/linux-cifs/aehrPuY60VMcYGU8@infradead.org/ Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
accel/qaic: fix incorrect counter check in RAS message decode
The UE and UE_NF cases check ce_count against UINT_MAX before incrementing
their respective counters. This is logically incorrect and prevents
ue_count and ue_nf_count from incrementing when ce_count reaches UINT_MAX.
Fixes: c11a50b170e7 ("accel/qaic: Add Reliability, Accessibility, Serviceability (RAS)") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Link: https://patch.msgid.link/20260410112015.592546-1-alok.a.tiwari@oracle.com
Linus Torvalds [Fri, 1 May 2026 20:19:14 +0000 (13:19 -0700)]
Merge tag 'selinux-pr-20260501' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Ensure SELinux is always properly accessing its own sock LSM state
- Only reserve an xattr slot for SELinux if it will be used
- Fix a SELinux auditing regression in the directory avdcache
* tag 'selinux-pr-20260501' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix avdcache auditing
selinux: don't reserve xattr slot when we won't fill it
selinux: use sk blob accessor in socket permission helpers
Davidlohr Bueso [Fri, 1 May 2026 19:41:23 +0000 (12:41 -0700)]
futex: Drop CLONE_THREAD requirement for private default hash alloc
Currently need_futex_hash_allocate_default() depends on strict pthread
semantics, abusing CLONE_THREAD. This breaks the non-concurrency
assumptions when doing the mm->futex_ref pcpu allocations, leading to
bugs[0] when sharing the mm in other ways; ie:
BUG: KASAN: slab-use-after-free in futex_hash_put
... where the +1 bias can end up on a percpu counter that mm->futex_ref
no longer points at.
Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding
vfork keeps the existing paths untouched (no overhead), and we can't
race in the first place: either the parent is suspended and the child
runs alone, or mm->futex_ref is already allocated from an earlier
CLONE_VM.
Linus Torvalds [Fri, 1 May 2026 19:58:02 +0000 (12:58 -0700)]
Merge tag 's390-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Reject zero-length writes from userspace that corrupt Debug Facility
buffers
- Replace one s390 PCI maintainer
- Remove SCLP_OFB Kconfig option and enable the guarded code
unconditionally
- Replace incorrect use of phys_to_folio() to virt_to_folio() in
do_secure_storage_access()
* tag 's390-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix phys_to_folio() usage in do_secure_storage_access()
s390/sclp: Remove SCLP_OFB Kconfig option
MAINTAINERS: Replace one of the maintainers for s390/pci
s390/debug: Reject zero-length input in debug_input_flush_fn()
s390/debug: Reject zero-length input before trimming a newline
Thomas Gleixner [Wed, 8 Apr 2026 11:54:29 +0000 (13:54 +0200)]
netfilter: xt_IDLETIMER: Switch to alarm_start_timer()
The existing alarm_start() interface is replaced with the new
alarm_start_timer() mechanism, which does not longer queue an already
expired timer and returns the state.
Adjust the code to utilize this so it schedules the work in the case that
the timer was already expired. Unlikely to happen as the timeout is at
least a second, but not impossible especially with virtualization.
Thomas Gleixner [Wed, 8 Apr 2026 11:54:24 +0000 (13:54 +0200)]
power: supply: charger-manager: Switch to alarm_start_timer()
The existing alarm_start() interface is replaced with the new
alarm_start_timer() mechanism, which does not longer queue an already
expired timer and returns the state. Adjust the code to utilize this.
Thomas Gleixner [Wed, 8 Apr 2026 11:54:20 +0000 (13:54 +0200)]
fs/timerfd: Use the new alarm/hrtimer functions
Like any other user controlled interface, timerfd based timers can be
programmed with expiry times in the past or vary small intervals.
Both hrtimer and alarmtimer provide new interfaces which return the queued
state of the timer. If the timer was already expired, then let the callsite
handle the timerfd context update so that the full round trip through the
hrtimer interrupt is avoided.
Thomas Gleixner [Wed, 8 Apr 2026 11:54:16 +0000 (13:54 +0200)]
alarmtimer: Convert posix timer functions to alarm_start_timer()
Use the new alarm_start_timer() for arming and rearming posix interval
timers and for clock_nanosleep() so that already expired timers do not go
through the full timer interrupt cycle.
Thomas Gleixner [Wed, 8 Apr 2026 11:54:11 +0000 (13:54 +0200)]
alarmtimer: Provide alarm_start_timer()
Alarm timers utilize hrtimers for normal operation and only switch to the
RTC on suspend. In order to catch already expired timers early and without
going through a timer interrupt cycle, provide a new start function which
internally uses hrtimer_start_range_ns_user().
If hrtimer_start_range_ns_user() detects an already expired timer, it does
not queue it. In that case remove the timer from the alarm base as well.
Return the status queued or not back to the caller to handle the early
expiry.
Thomas Gleixner [Wed, 8 Apr 2026 11:54:06 +0000 (13:54 +0200)]
posix-timers: Switch to hrtimer_start_expires_user()
Switch the arm and rearm callbacks for hrtimer based posix timers over to
hrtimer_start_expires_user() so that already expired timers are not
queued. Hand the result back to the caller, which then queues the signal.
Thomas Gleixner [Wed, 8 Apr 2026 11:54:01 +0000 (13:54 +0200)]
posix-timers: Handle the timer_[re]arm() return value
The [re]arm callbacks will return true when the timer was queued and false
if it was already expired at enqueue time.
In both cases the call sites can trivially queue the signal right there,
when the timer was already expired. That avoids a full round trip through
the hrtimer interrupt.
Thomas Gleixner [Wed, 8 Apr 2026 11:53:56 +0000 (13:53 +0200)]
posix-timers: Expand timer_[re]arm() callbacks with a boolean return value
In order to catch expiry times which are already in the past the
timer_arm() and timer_rearm() callbacks need to be able to report back to
the caller whether the timer has been queued or not.
Change the function signature and let all implementations return true for
now. While at it simplify posix_cpu_timer_rearm().
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: John Stultz <jstultz@google.com> Link: https://patch.msgid.link/20260408114952.130222296@kernel.org
Thomas Gleixner [Wed, 8 Apr 2026 11:53:52 +0000 (13:53 +0200)]
hrtimer: Use hrtimer_start_expires_user() for hrtimer sleepers
Most hrtimer sleepers are user controlled and user space can hand arbitrary
expiry values in as long as they are valid timespecs. If the expiry value
is in the past then this requires a full loop through reprogramming the
clock event device, taking the hrtimer interrupt, waking the task and
reprogram again.
Use hrtimer_start_expires_user() which avoids the full round trip by
checking the timer for expiry on enqueue.
Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260408114952.062400833@kernel.org
Thomas Gleixner [Wed, 8 Apr 2026 11:53:46 +0000 (13:53 +0200)]
hrtimer: Provide hrtimer_start_range_ns_user()
Calvin reported an odd NMI watchdog lockup which claims that the CPU locked
up in user space. He provided a reproducer, which set's up a timerfd based
timer and then rearms it in a loop with an absolute expiry time of 1ns.
As the expiry time is in the past, the timer ends up as the first expiring
timer in the per CPU hrtimer base and the clockevent device is programmed
with the minimum delta value. If the machine is fast enough, this ends up
in a endless loop of programming the delta value to the minimum value
defined by the clock event device, before the timer interrupt can fire,
which starves the interrupt and consequently triggers the lockup detector
because the hrtimer callback of the lockup mechanism is never invoked.
The clockevents code already has a last resort mechanism to prevent that,
but it's sensible to catch such issues before trying to reprogram the clock
event device.
Provide a variant of hrtimer_start_range_ns(), which sanity checks the
timer after queueing it. It does not so before because the timer might be
armed and therefore needs to be dequeued. also we optimize for the latest
possible point to check, so that the clock event prevention is avoided as
much as possible.
If the timer is already expired _before_ the clock event is reprogrammed,
remove the timer from the queue and signal to the caller that the operation
failed by returning false.
That allows the caller to take immediate action without going through the
loops and hoops of the hrtimer interrupt.
The queueing code can't invoke the timer callback as the caller might hold
a lock which is taken in the callback.
Add a tracepoint which allows to analyze the expired at start situation.
Mark Brown [Thu, 23 Apr 2026 19:17:45 +0000 (20:17 +0100)]
selftests/rseq: Don't run tests with runner scripts outside of the scripts
The rseq selftests include two runner scripts run_param_test.sh and
run_syscall_errors_test.sh which set up the environment for test binaries
and run them with various parameters. Currently we list these test binaries
in TEST_GEN_PROGS but this results in the kselftest framework running them
directly as well as via the runners, resulting in duplication and spurious
failures when the environment is not correctly set up (eg, if glibc tries
to use rseq).
Move the binaries the runners invoke to TEST_GEN_PROGS_EXTENDED, binaries
listed there are built but not run by the framework. The param_test
benchmarks are not moved since they are not run by run_param_test.sh.
Fixes: 830969e7821a ("selftests/rseq: Implement time slice extension test") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260423-selftests-rseq-use-runner-v1-1-e13a133754c1@kernel.org Cc: stable@vger.kernel.org
Linus Torvalds [Fri, 1 May 2026 18:26:15 +0000 (11:26 -0700)]
Merge tag 'block-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- MD pull request via Yu:
- Fix a raid5 UAF on IO across the reshape position
- Avoid failing RAID1/RAID10 devices for invalid IO errors
- Fix RAID10 divide-by-zero when far_copies is zero
- Restore bitmap grow through sysfs
- Use mddev_is_dm() instead of open-coding gendisk checks
- Use ATTRIBUTE_GROUPS() for md default sysfs attributes
- Replace open-coded wait loops with wait_event helpers
- NVMe pull request via Keith:
- Target data transfer size configuation (Aurelien)
- Enable P2P for RDMA (Shivaji Kant)
- TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
- TCP host updates (Alistair, Chaitanya)
- Authentication updates (Alistair, Daniel, Chris Leech)
- Multipath fixes (John Garry)
- New quirks (Alan Cui, Tao Jiang)
- Apple driver fix (Fedor Pchelkin)
- PCI admin doorbell update fix (Keith)
- Properly propagate CDROM read-only state to the block layer
* tag 'block-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (35 commits)
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()
md/md-bitmap: add a none backend for bitmap grow
md/md-bitmap: split bitmap sysfs groups
md: factor bitmap creation away from sysfs handling
md: use mddev_lock_nointr() in mddev_suspend_and_lock_nointr()
md: replace wait loop with wait_event() in md_handle_request()
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
md/raid1,raid10: don't fail devices for invalid IO errors
MAINTAINERS: Add Xiao Ni as md/raid reviewer
md/raid5: Fix UAF on IO across the reshape position
cdrom, scsi: sr: propagate read-only status to block layer via set_disk_ro()
nvme-auth: Hash DH shared secret to create session key
nvme-pci: fix missed admin queue sq doorbell write
nvme-auth: Include SC_C in RVAL controller hash
nvme-tcp: teardown circular locking fixes
nvmet-tcp: Don't clear tls_key when freeing sq
Revert "nvmet-tcp: Don't free SQ on authentication success"
nvme: skip trace completion for host path errors
...
Linus Torvalds [Fri, 1 May 2026 18:01:31 +0000 (11:01 -0700)]
Merge tag 'io_uring-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove dead struct io_buffer_list member
- Fix for incrementally consumed buffers with recvmsg multishot, which
requires a minimum value left in a buffer for any receive for the
headers. If there's still a bit of buffer left but it's smaller than
that value, then userspace will see a spurious -EFAULT returned in
the CQE
- Locking fix for the DEFER_TASKRUN retry list, which otherwise could
race with fallback cancelations. If the task is exiting with
task_work left in both the normal and retry list AND the exit cleanup
races with the task running task work, then entries could either be
doubly completed or lost
- Cap NAPI busy poll timeout to something sane, to avoid syzbot running
into excessive polling and triggering warnings around that
* tag 'io_uring-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/tw: serialize ctx->retry_llist with ->uring_lock
io_uring/napi: cap busy_poll_to 10 msec
io_uring/kbuf: support min length left for incremental buffers
io_uring/kbuf: kill dead struct io_buffer_list 'nr_entries' member
Jihed Chaibi [Wed, 25 Mar 2026 22:34:11 +0000 (23:34 +0100)]
ARM: dts: am335x-sl50: Fix audio bitclock and frame master endpoint
The cpu_endpoint in mcasp0 specifies the TLV320AIC3106 codec as the
bitclock and frame master, but the phandles point to the codec's port
node (codec_port) rather than its endpoint node (codec_endpoint).
audio-graph-card calls simple_util_parse_daifmt() with ep_codec set to
the endpoint node (codec_endpoint). The function resolves the
bitclock-master phandle and checks whether it equals ep_codec. Since
codec_port is the parent of codec_endpoint, not the endpoint itself, the
comparison always evaluates to false. This causes the mcasp0 CPU side to
be silently configured as bitclock and frame master instead of the codec,
which is the opposite of the intended configuration.
Fix by pointing bitclock-master and frame-master to codec_endpoint.
Linus Torvalds [Fri, 1 May 2026 16:51:38 +0000 (09:51 -0700)]
Merge tag 'spi-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There are a couple of nasty issues fixed here in the axiado and
rockchip drivers. We've also got more of the fixes from Johan here,
this time for the two Cadence drivers, plus a couple of other similar
fixes from John and Felix"
* tag 'spi-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amlogic-spisg: initialize completion before requesting IRQ
spi: axiado: replace usleep_range() with udelay() in IRQ path
spi: cadence-quadspi: fix runtime pm and clock imbalance on unbind
spi: cadence-quadspi: fix unclocked access on unbind
spi: cadence-quadspi: fix clock imbalance on probe failure
spi: cadence-quadspi: fix runtime pm disable imbalance on probe failure
spi: cadence: fix clock imbalance on probe failure
spi: cadence: fix unclocked access on unbind
spi: rockchip: Drop unused and broken CR0 macros
spi: rockchip: Read ISR, not IMR, to detect cs-inactive IRQ
spi: rzv2h-rspi: Fix silent failure in clock setup error path
Kevin Brodsky [Mon, 27 Apr 2026 12:03:33 +0000 (13:03 +0100)]
arm64: signal: Preserve POR_EL0 if poe_context is missing
Commit 2e8a1acea859 ("arm64: signal: Improve POR_EL0 handling to
avoid uaccess failures") delayed the write to POR_EL0 in
rt_sigreturn to avoid spurious uaccess failures. This change however
relies on the poe_context frame record being present: on a system
supporting POE, calling sigreturn without a poe_context record now
results in writing arbitrary data from the kernel stack into POR_EL0.
Fix this by adding a __valid_fields member to struct
user_access_state, and zeroing the struct on allocation.
restore_poe_context() then indicates that the por_el0 field is valid
by setting the corresponding bit in __valid_fields, and
restore_user_access_state() only touches POR_EL0 if there is a valid
value to set it to. This is in line with how POR_EL0 was originally
handled; all frame records are currently optional, except
fpsimd_context.
To ensure that __valid_fields is kept in sync, fields (currently
just por_el0) are now accessed via accessors and prefixed with __ to
discourage direct access.
Fixes: 2e8a1acea859 ("arm64: signal: Improve POR_EL0 handling to avoid uaccess failures") Cc: <stable@vger.kernel.org> Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 1 May 2026 16:25:12 +0000 (09:25 -0700)]
Merge tag 'regulator-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix from Arnd re-adding a dependency on gpiolib which was implicitly
pulled in via an OF specific route which got removed as part of a
cleanup"
* tag 'regulator-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rpi-panel-attiny: add back GPIOLIB dependency
Linus Torvalds [Fri, 1 May 2026 15:45:23 +0000 (08:45 -0700)]
Merge tag 'mm-hotfixes-stable-2026-04-30-15-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"20 hotfixes. All are for MM (and for MMish maintainers). 9 are
cc:stable and the remainder are for post-7.0 issues or aren't deemed
suitable for backporting.
There are two DAMON series from SeongJae Park which address races
which could lead to use-after-free errors, and avoid the possibility
of presenting stale parameter values to users"
* tag 'mm-hotfixes-stable-2026-04-30-15-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memcontrol: fix rcu unbalance in get_non_dying_memcg_end()
mm/userfaultfd: detect VMA type change after copy retry in mfill_copy_folio_retry()
MAINTAINERS: remove stale kdump project URL
mm/damon/stat: detect and use fresh enabled value
mm/damon/lru_sort: detect and use fresh enabled and kdamond_pid values
mm/damon/reclaim: detect and use fresh enabled and kdamond_pid values
selftests/mm: specify requirement for PROC_MEM_ALWAYS_FORCE=y
mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
MAINTAINERS: update Li Wang's email address
MAINTAINERS, mailmap: update email address for Qi Zheng
MAINTAINERS: update Liam's email address
mm/hugetlb_cma: round up per_node before logging it
MAINTAINERS: fix regex pattern in CORE MM category
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
mm: start background writeback based on per-wb threshold for strictlimit BDIs
kho: fix error handling in kho_add_subtree()
liveupdate: fix return value on session allocation failure
mailmap: update entry for Dan Carpenter
vmalloc: fix buffer overflow in vrealloc_node_align()
For 4K pages, the early kernel mapping may use 2MB block entries but the
kernel segments are only 64KB aligned. Segment boundaries that fall
within a 2MB block therefore require a PTE table so that different
attributes can be applied on either side of the boundary.
KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel
VMAs registered by declare_kernel_vmas(). However, since commit 5973a62efa34 ("arm64: map [_text, _stext) virtual address range
non-executable+read-only"), the early mapper also maps [_text, _stext)
separately from [_stext, _etext). This adds one more early-only split
and can require one more page-table page than the existing
EARLY_SEGMENT_EXTRA_PAGES allowance reserves.
Increase the 4K-page early mapping allowance by one page to cover that
additional split.
Fixes: 5973a62efa34 ("arm64: map [_text, _stext) virtual address range non-executable+read-only") Assisted-by: TRAE:GLM-5.1 Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
[catalin.marinas@arm.com: rewrote part of the commit log]
[catalin.marinas@arm.com: expanded the code comment] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Leo Yan [Wed, 29 Apr 2026 14:30:10 +0000 (15:30 +0100)]
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
kselftest includes kernel uAPI headers with option:
-isystem $(top_srcdir)/usr/include
Include <asm/ptrace.h> in libc-gcs.c for the definition of struct
user_gcs from the uAPI headers, and remove the redundant definition in
gcs-util.h. This fixes a compilation error on systems where the
toolchain defines NT_ARM_GCS.
Fixes: a505a52b4e29 ("kselftest/arm64: Add a GCS test program built with the system libc") Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ALSA: hda/realtek: Add codec SSID quirk for Lenovo Yoga Pro 9 16IMH9
The Yoga Pro 9 16IMH9 (codec SSID 17aa:38d6) shares PCI audio device
subsystem ID 17aa:3811 with the Legion S7 15IMH05. The existing
SND_PCI_QUIRK entry for the Legion routes both machines to
ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS, which does not bind the TAS2781
smart amplifiers, resulting in near-silent built-in speakers.
Add an HDA_CODEC_QUIRK entry immediately before the conflicting PCI quirk
that matches the Yoga Pro 9's unique codec SSID and routes it to
ALC287_FIXUP_TAS2781_I2C. Codec quirks are evaluated after PCI quirks and
take precedence, leaving the Legion S7 15IMH05 entry unaffected.
This follows the same pattern used to disambiguate PCI SSID 17aa:3847
(shared between Yoga Pro 7 14IMH9 and Legion 7 16ACHG6), where a
HDA_CODEC_QUIRK for codec SSID 17aa:38cf resolves the conflict.
Jens Axboe [Fri, 1 May 2026 11:23:12 +0000 (19:23 +0800)]
ublk: don't issue uring_cmd from fallback task work
When ublk_ch_uring_cmd_cb() runs as fallback task work (e.g., because
the submitting task is exiting), the command should not be issued as
current is a kworker, not the daemon task. This can cause io->task
to capture the wrong task in __ublk_fetch(), leading to a task
mismatch warning in ublk_uring_cmd_cancel_fn().
Check tw.cancel and return -ECANCELED instead of issuing the command
from fallback context.
Configure the device DMA mask during probe using the GPU's physical
address capability reported in GpuInfo. This ensures DMA allocations
use an appropriate address mask.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Beata Michalska <beata.michalska@arm.com> Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com> Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com> Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-4-c69af9abe1af@collabora.com Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Alvin Sun [Tue, 28 Apr 2026 19:19:30 +0000 (12:19 -0700)]
drm/tyr: use shmem GEM object type in TyrDrmDriver
Tyr buffer objects are shmem-backed, so the driver should use
drm::gem::shmem::Object<BoData> as its GEM object type instead of the base
drm::gem::Object<BoData> type.
Switching to the shmem GEM object type matches how Tyr allocates and
manages its buffer objects, and uses the shmem-specific GEM abstraction
provided by the DRM Rust bindings.
Select RUST_DRM_GEM_SHMEM_HELPER to ensure the required helpers are
available when DRM_TYR is enabled.
Boris Brezillon [Tue, 28 Apr 2026 19:19:29 +0000 (12:19 -0700)]
drm/tyr: rename TyrObject to BoData
Currently the GEM inner driver data object is called `TyrObject` which
is a fairly generic name. To make the code easier to understand,
rename `TyrObject` to `BoData` so that the name better reflects its
role.
No functional change is intended.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com> Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com> Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-2-c69af9abe1af@collabora.com Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Currently Tyr disables its clocks from TyrDrmDeviceData::drop(), which
causes them to be shut down before any other fields in TyrDrmDeviceData
are dropped. This prevents us from using the clocks when dropping the
other fields in TyrDrmDeviceData.
In order to better control when the clocks are dropped, move this cleanup
logic into a Drop implementation on the Clocks struct itself.
Since it serves no further purpose, remove the PinnedDrop implementation
for TyrDrmDeviceData.
Also, while here, remove the #[pin_data] annotation from both the struct
Clocks and struct Regulators since neither of these structs need this
macro to create structurally pinned fields.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com> Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-1-c69af9abe1af@collabora.com Signed-off-by: Alice Ryhl <aliceryhl@google.com>
netfilter: flowtable: use skb_pull_rcsum() to pop vlan/pppoe header
This adjusts the checksum, if required, after pulling the layer 2
header, either the pppoe header or the inner vlan header in the
double-tagged vlan packets.
Add the VID/PIDs for the ASUS ROG RAIKIRI II controller to xpad_device
and the VID to xpad_table. The controller has a physical PC/XBOX toggle
which switches between XBOX360 and XBOXONE protocols.
Paolo Bonzini [Wed, 8 Apr 2026 15:41:57 +0000 (11:41 -0400)]
KVM: x86/mmu: rename and clarify BYTE_MASK
The BYTE_MASK macro is the central point of the black magic
in update_permission_bitmask(). Rename it to something
that relates to how it is used, and add a comment explaining
how it works.
Using shifts instead of powers of two was actually suggested by
David Hildenbrand back in 2017 for clarity[1] but I evidently
forgot his suggestion when applying to kvm.git.
Dave Airlie [Fri, 1 May 2026 02:49:22 +0000 (12:49 +1000)]
Merge tag 'drm-xe-fixes-2026-04-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
API Fixes:
- Add missing pad and extensions check (Jonathan)
- Reject unsafe PAT indices for CPU cached memory (Jia)
Driver Fixes:
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge (Brost)
- Xe3p tuning and workaround fixes (Roper, Gustavo)
- USE drm mm instead of drm SA for CCS read/write (Satya)
- Fix leaks and null derefs (Shuicheng)
- Fix Wa_18022495364 (Tvrtko)
Michael Neuling [Thu, 9 Apr 2026 09:11:39 +0000 (09:11 +0000)]
riscv: errata: Fix bitwise vs logical AND in MIPS errata patching
The condition checking whether a specific errata needs patching uses
logical AND (&&) instead of bitwise AND (&). Since logical AND only
checks that both operands are non-zero, this causes all errata patches
to be applied whenever any single errata is detected, rather than only
applying the matching one.
The SiFive errata implementation correctly uses bitwise AND for the same
check.
Fixes: 0b0ca959d206 ("riscv: errata: Fix the PAUSE Opcode for MIPS P8700") Signed-off-by: Michael Neuling <mikey@neuling.org> Assisted-by: Cursor:claude-4.6-opus-high-thinking Link: https://patch.msgid.link/20260409091143.1348853-2-mikey@neuling.org
[pjw@kernel.org: fixed checkpatch warning] Signed-off-by: Paul Walmsley <pjw@kernel.org>
Jakub Kicinski [Fri, 1 May 2026 01:53:20 +0000 (18:53 -0700)]
Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2026-04-29
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Extend query_esw_functions output for multi-function support
net/mlx5: Remove unused host_sf_enable field
net/mlx5: Add function_id_type for enable/disable_hca cmds
mlx5: Rename the vport number enums for host PF and VF
====================
This series tightens Marvell OcteonTX2 AF NPC support for CN20K silicon
around MCAM key typing, optional debugfs setup, defrag allocation rollback,
defrag entry relocation bookkeeping, logical MCAM clear and programming,
default-rule index handling with explicit teardown, and NIXLF reserved-slot
lookup when default rules are missing.
Patches 1 through 3 focus on AF error handling: propagate
npc_mcam_idx_2_key_type() failures through cn20k MCAM enable, config, copy,
and read paths; treat cn20k NPC debugfs nodes as optional so probe does not
fail when debugfs is unavailable; and fix defrag MCAM allocation rollback
so allocation errno is not overwritten during subbank index resolution.
Patch 4 fixes npc_defrag_move_vdx_to_free(): when an MCAM line is moved to
a new physical index, move entry2target_pffunc[] association to the new
slot, clear the old slot, and retarget the matching mcam_rules entry so
software state matches hardware after defrag.
Patches 5 through 7 refine cn20k MCAM programming: clear entries using the
logical MCAM index and resolved key width, fix bank/CFG sequencing in
npc_cn20k_config_mcam_entry(), and read action metadata from the correct
bank in npc_cn20k_read_mcam_entry().
Patches 8 through 10 complete default-rule lifecycle handling: initialize
default-rule index outputs eagerly, tear down reserved default MCAM rules
explicitly (coordinated with npc_mcam_free_all_entries()), and reject
USHRT_MAX sentinel indices from npc_get_nixlf_mcam_index() on cn20k.
====================
octeontx2-af: npc: cn20k: Reject missing default-rule MCAM indices
When cn20k default L2 rules are not installed,
npc_cn20k_dft_rules_idx_get() leaves broadcast, multicast, promiscuous, and
unicast slots at USHRT_MAX. npc_get_nixlf_mcam_index() previously returned
that sentinel as a valid MCAM index, so callers could program hardware with
an invalid index.
Return -EINVAL from the cn20k branches of npc_get_nixlf_mcam_index() when
the requested slot is still USHRT_MAX. Harden cn20k NPC MCAM entry helpers
to reject out-of-range indices before touching hardware.
Drop the early bounds check in npc_enable_mcam_entry() for cn20k so invalid
indices are validated inside npc_cn20k_enable_mcam_entry() instead of being
silently ignored.
In rvu_npc_update_flowkey_alg_idx(), treat negative MCAM indices like
out-of-range values, and only update RSS actions for promiscuous and
all-multi paths when the resolved index is non-negative.
octeontx2-af: npc: cn20k: Tear down default MCAM rules explicitly on free
npc_cn20k_dft_rules_free() used the NPC MCAM mbox "free all" path, which
does not match how cn20k tracks default-rule MCAM slots indexes.
Resolve the default-rule indices, then for each valid slot clear the bitmap
entry, drop the PF/VF map, disable the MCAM line, clear the target
function, and npc_cn20k_idx_free(). Remove any matching software mcam_rules
nodes. On hard failure from idx_free, WARN and stop so the box stays up for
analysis.
In npc_mcam_free_all_entries(), prefetch the same default-rule indices and,
on cn20k, skip bitmap clear and idx_free when the scanned entry is one of
those reserved defaults (they are released by npc_cn20k_dft_rules_free).
octeontx2-af: npc: cn20k: Initialize default-rule index outputs up front
npc_cn20k_dft_rules_idx_get() wrote USHRT_MAX into individual outputs only
on some error paths (lbk promisc lookup, VF ucast lookup, and the PF rule
walk), which could leave other caller slots stale across retries.
Set every non-NULL bcast/mcast/promisc/ucast pointer to USHRT_MAX once at
entry, then drop the duplicate assignments on failure. Successful lookups
still overwrite the relevant slot before returning.
npc_cn20k_read_mcam_entry() always reloaded action and vtag_action from
bank 0 after programming the CAM words. Use the bank returned by
npc_get_bank() for the ACTION reads as well, and read those registers once
up front so both X2 and X4 paths share the same metadata.
Return directly from the X2 keyword path now that the action fields are
already populated.
Cc: Suman Ghosh <sumang@marvell.com> Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/20260429022722.1110289-8-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For X4 keys its loop reused the bank parameter as the loop counter, so bank
no longer reflected the caller's bank after the loop and the control flow
was hard to follow.
Program NPC_AF_CN20K_MCAMEX_BANKX_CFG_EXT directly in
npc_cn20k_config_mcam_entry(): one CFG write for X2 using the computed
bank, and one CFG write per bank inside the X4 action loop. Enable the
entry at the end with npc_cn20k_enable_mcam_entry(..., true) instead of
embedding the enable bit in bank_cfg via the removed helper.
Cc: Suman Ghosh <sumang@marvell.com> Fixes: 4e527f1e5c15 ("octeontx2-af: npc: cn20k: Add new mailboxes for CN20K silicon") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/20260429022722.1110289-7-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
octeontx2-af: npc: cn20k: Clear MCAM entries by index and key width
Replace the old four-argument CN20K MCAM clear with a per-bank static
helper and npc_cn20k_clear_mcam_entry() that takes a logical MCAM index,
resolves the key width via npc_mcam_idx_2_key_type(), and clears either one
bank (X2) or every bank (X4).
Call it from npc_clear_mcam_entry() on cn20k and log when key-type lookup
fails. Use the per-bank helper from npc_cn20k_config_mcam_entry() for
pre-program clears.
For loopback VFs, use the promisc MCAM index as ucast_idx when copying RSS
action for promisc, matching cn20k default-rule layout.
Cc: Suman Ghosh <sumang@marvell.com> Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/20260429022722.1110289-6-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_move_vdx_to_free() disables, copies, and enables the MCAM entry
at a new index but previously left entry2target_pffunc[] and the mcam_rules
list still keyed to the old index. Copy the target PF association to the
new slot, clear the old one, and retarget the rule entry so software state
matches the relocated hardware context.
octeontx2-af: npc: cn20k: Propagate errors in defrag MCAM alloc rollback
npc_defrag_alloc_free_slots() allocates MCAM indexes in up to two passes on
bank0 then bank1. On failure it rolls back by freeing entries already
placed in save[].
__npc_subbank_alloc() can return a negative errno while only part of the
indexes are valid. The rollback loop used rc for
npc_mcam_idx_2_subbank_idx() as well, so a successful lookup stored zero in
rc and a later __npc_subbank_free() failure could still end with return 0
when the allocation path had also left rc at zero (for example shortfall
after zero return values from the alloc helpers).
Jump to the rollback path immediately when either __npc_subbank_alloc()
call fails, preserving its errno. If both calls succeed but the total
allocated count is still less than cnt, set rc to -ENOSPC before rollback.
Use a separate err variable for npc_mcam_idx_2_subbank_idx() so a
successful lookup no longer clears a non-zero rc from the allocation phase.
octeontx2-af: npc: cn20k: Drop debugfs_create_file() error checks in init
debugfs is not intended to be checked for allocation failures the way other
kernel APIs are: callers should not fail probe or subsystem init because a
debugfs node could not be created, including when debugfs is disabled in
Kconfig. Replacing NULL checks with IS_ERR() checks is similarly wrong for
optional debugfs.
Remove dentry checks and -EFAULT returns from npc_cn20k_debugfs_init().
See:
https://staticthinking.wordpress.com/2023/07/24/
debugfs-functions-are-not-supposed-to-be-checked/
octeontx2-af: npc: cn20k: Propagate MCAM key-type errors on cn20k
npc_mcam_idx_2_key_type() can fail; callers used to ignore it and still
used kw_type when enabling, configuring, copying, and reading MCAM entries.
That could program or decode hardware with an undefined key type.
Return -EINVAL when key-type lookup fails. Return -EINVAL from
npc_cn20k_copy_mcam_entry() when src and dest key types differ instead of
failing silently.
Change npc_cn20k_{enable,config,copy,read}_mcam_entry() to return int on
success or error. Thread those errors through the cn20k MCAM write and read
mbox handlers, the cn20k baseline steer read path, NPC defrag move
(disable/copy/enable with dev_err and -EFAULT), and the DMAC update path in
rvu_npc_fs.c.
Make npc_copy_mcam_entry() return int so the cn20k branch can return
npc_cn20k_copy_mcam_entry() without a void/int mismatch, and fail
NPC_MCAM_SHIFT_ENTRY when copy fails.
Lorenzo Bianconi [Wed, 29 Apr 2026 12:02:31 +0000 (14:02 +0200)]
net: airoha: Move entries to queue head in case of DMA mapping failure in airoha_dev_xmit()
In order to respect the original descriptor order and avoid any
potential IOMMU fault or memory corruption, move pending queue entries
to the head of hw queue tx_list if the DMA mapping of current inflight
packet fails in airoha_dev_xmit routine.
Currently, request_threaded_irq() is used with a primary handler but a
NULL threaded handler, while also setting the IRQF_ONESHOT flag. This
specific combination triggers a WARNING since the commit aef30c8d569c
("genirq: Warn about using IRQF_ONESHOT without a threaded handler").
WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x4fa/0x760
Fix the issue by switching to request_irq(), which is the appropriate
interface or a non-threaded interrupt handler, and removing the
unnecessary IRQF_ONESHOT flag.
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn).
projects / thirdparty / kernel / linux.git / log
