Documentation: net/smc: correct old value of smcr_max_recv_wr
The smc-sysctl.rst documentation incorrectly stated that
the previous hardcoded maximum number of WR buffers on
the receive path (smcr_max_recv_wr) was 16.
The correct historical value used before the introduction of
the sysctl control was 48. Update the documentation to reflect
the accurate historical value. Also fix a couple of minor typos.
Merge tag 'fs_for_v7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs and udf fixes from Jan Kara:
"Several isofs and udf fixes"
* tag 'fs_for_v7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
docs: isofs: replace dead ECMA-119 FTP link
udf: reject descriptors with oversized CRC length
isofs: use QSTR_LEN() in isofs_cmp
isofs: validate block number from NFS file handle in isofs_export_iget
isofs: validate Rock Ridge CE continuation extent against volume size
Merge tag 'for-7.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- space reservation fixes:
- correctly undo 'may_use' accounting for remap tree
- avoid double decrement of 'may_use' when submitting async io
- actually enable the shutdown ioctl callback (not just the superblock
ops)
- raid stripe tree fixes when deleting extents
- add missing error handling
- fix various incorrect values set
- fix transaction state when removing a directory, possibly leading to
EIO during log replay
- additional b-tree node key checks during metadata readahead
- error handling and transaction abort updates
* tag 'for-7.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix double-decrement of bytes_may_use in submit_one_async_extent()
btrfs: check return value of btrfs_partially_delete_raid_extent()
btrfs: handle -EAGAIN from btrfs_duplicate_item and refresh stale leaf pointer
btrfs: replace ASSERT with proper error handling in stripe lookup fallback
btrfs: fix wrong min_objectid in btrfs_previous_item() call
btrfs: fix raid stripe search missing entries at leaf boundaries
btrfs: copy devid in btrfs_partially_delete_raid_extent()
btrfs: handle unexpected free-space-tree key types
btrfs: fix missing last_unlink_trans update when removing a directory
btrfs: don't clobber errors in add_remap_tree_entries()
btrfs: enable shutdown ioctl for non-experimental builds
btrfs: apply first key check for readahead when possible
btrfs: abort transaction in do_remap_reloc_trans() on failure
btrfs: fix bytes_may_use leak in do_remap_reloc_trans()
btrfs: fix bytes_may_use leak in move_existing_remap()
David Windsor [Sun, 26 Apr 2026 23:23:49 +0000 (19:23 -0400)]
selinux: don't reserve xattr slot when we won't fill it
Move lsm_get_xattr_slot() below the SBLABEL_MNT check so we don't leave
a NULL-named slot in the array when returning -EOPNOTSUPP; filesystem
initxattrs() callbacks stop iterating at the first NULL ->name, silently
dropping xattrs installed by later LSMs.
Cc: stable@vger.kernel.org Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
selinux: use sk blob accessor in socket permission helpers
SELinux socket state lives in the composite LSM socket blob.
sock_has_perm() and nlmsg_sock_has_extended_perms() currently
dereference sk->sk_security directly, which assumes the SELinux socket
blob is at offset zero.
In stacked configurations that assumption does not hold. If another LSM
allocates socket blob storage before SELinux, these helpers may read the
wrong blob and feed invalid SID and class values into AVC checks.
Use selinux_sock() instead of accessing sk->sk_security directly.
Fixes: d1d991efaf34 ("selinux: Add netlink xperm support") Cc: stable@vger.kernel.org # v6.13+ Signed-off-by: Zongyao Chen <ZongYao.Chen@linux.alibaba.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
ASoC: Intel: cht_bsw_rt5672: Simplify probe() with local 'dev' pointer
In snd_cht_mc_probe(), &pdev->dev is dereferenced repeatedly throughout
the function. Introduce a local dev pointer
early in the function and use it consistently in place of all open-coded
&pdev->dev references.
It reduces repetition, improves readability, and aligns with the common
kernel driver pattern of caching the device pointer at function entry.
ASoC: wsa881x: Move custom workaround to gpiolib-of
The WSA881x codec driver has a local workaround for old device
trees that have the "powerdown" GPIO flagged as active high,
despite it is active low.
This quirk can be replaced by a single quirk entry in
gpiolib-of.c
Drop all polarity inversion code and drop the surplus
gpiod_direction_output() call in probe() since we now set up
the line correctly when getting the GPIO.
Also drop the inclusion of the unused <linux/gpio.h>.
Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image,
during the file system mounting process, specifically while loading the
catalog, a corrupted node_size value of 1 caused the rec_off argument
passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively
large. Consequently, the function failed to return a valid value to
initialize the off variable, triggering the bug [1].
Every node starts from BTree node descriptor: struct hfs_bnode_desc.
So, the size of node cannot be lesser than that. However, technical
specification declares that: "The node size (which is expressed in bytes)
must be power of two, from 512 through 32,768, inclusive." Add a check
for btree node size base on technical specification.
Keith Busch [Tue, 21 Apr 2026 15:06:44 +0000 (08:06 -0700)]
PCI: Don't fallback to bus reset after failed slot reset
If a bus has hotplug slots that implement the slot's reset_slot callback,
it is not safe to do the non-slot specific bus reset, so don't fallback to
it. If a slot reset does fail, the subsequent bus reset will attempt a 2nd
link reset on top of previous and fail to handle the hotplug events.
The hfsplus_get_block() only allows creating the next
sequential block. It returns -EIO for direct writes
beyond EOF. This patch waits for any in-flight DIO on the inode
to finish. Then, it extends the file by calling
generic_cont_expand_simple() with the goal to guarantee
that blockdev_direct_IO() finds all needed blocks
already reachable sequentially. And, finally, it flushes and
invalidates the DIO range again so the page cache is clean
before the direct write begins.
hfsplus: Remove the duplicate attr inode dirty marking action
Syzbot reported a null-ptr-deref in [1].
If the attributes file is not loaded during system mount, a trigger
occurs [1] when setxattr is executed in userspace.
Merge tag 'mailbox-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- core: fix NULL message handling and add API to query TX queue slots
- test: resolve concurrency bugs, dangling IRQs, and memory leaks
- dt-bindings: qcom: add Eliza IPCC
- mtk: fix address calculation and pointer handling bugs
- cix: resolve SCMI suspend timeouts
- misc memory allocation optimizations and cleanups
* tag 'mailbox-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: mailbox-test: make data_ready a per-instance variable
mailbox: mailbox-test: initialize struct earlier
mailbox: mailbox-test: don't free the reused channel
mailbox: mailbox-test: handle channel errors consistently
mailbox: update kdoc for struct mbox_controller
mailbox: add sanity check for channel array
mailbox: mailbox-test: free channels on probe error
mailbox: prefix new constants with MBOX_
dt-bindings: mailbox: qcom-ipcc: Document the Eliza Inter-Processor Communication Controller
mailbox: cix: Add IRQF_NO_SUSPEND to mailbox interrupt
mailbox: Fix NULL message support in mbox_send_message()
mailbox: remove superfluous internal header
mailbox: correct kdoc title for mbox_bind_client
mailbox: test: really ignore optional memory resources
mailbox: exynos: drop superfluous mbox setting per channel
mailbox: mtk-cmdq: Fix CURR and END addr for task insert case
mailbox: mtk-vcp-mailbox: Fix the return value in mtk_vcp_mbox_xlate()
mailbox: hi6220: kzalloc + kcalloc to kzalloc
mailbox: rockchip: kzalloc + kcalloc to kzalloc
mailbox: add API to query available TX queue slots
Rick Edgecombe [Thu, 2 Apr 2026 06:32:05 +0000 (00:32 -0600)]
x86/virt/tdx: Remove kexec docs
Recent changes have removed the hard limitations for using kexec and
TDX together. So remove the section in the TDX docs.
Users on partial write erratums will need an updated TDX module to
handle the rare edge cases. The docs do not currently provide any
guidance on recommended TDX module versions, so don't keep a whole
section around to document this interaction.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://patch.msgid.link/20260402-fuller_tdx_kexec_support-v3-5-34438d7094bf@intel.com
x86/tdx: Disable the TDX module during kexec and kdump
Use the TDH.SYS.DISABLE SEAMCALL, which disables the TDX module,
reclaims all memory resources assigned to TDX, and clears any
partial-write induced poison, to allow kexec and kdump on platforms with
the partial write errata.
On TDX-capable platforms with the partial write erratum, kexec has been
disabled because the new kernel could hit a machine check reading a
previously poisoned memory location.
Later TDX modules support TDH.SYS.DISABLE, which disables the module and
reclaims all TDX memory resources, allowing the new kernel to re-initialize
TDX from scratch. This operation also clears the old memory, cleaning up
any poison.
Add tdx_sys_disable() to tdx_shutdown(), which is called in the
syscore_shutdown path for kexec. This is done just before tdx_shutdown()
disables VMX on all CPUs.
For kdump, call tdx_sys_disable() in the crash path before
x86_virt_emergency_disable_virtualization_cpu() does VMXOFF.
Since this clears any poison on TDX-managed memory, remove the
X86_BUG_TDX_PW_MCE check in machine_kexec() that blocked kexec on
partial write errata platforms.
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://patch.msgid.link/20260402-fuller_tdx_kexec_support-v3-4-34438d7094bf@intel.com
x86/virt/tdx: Add SEAMCALL wrapper for TDH.SYS.DISABLE
Some early TDX-capable platforms have an erratum where a partial write
to TDX private memory can cause a machine check on a subsequent read.
On these platforms, kexec and kdump have been disabled in these cases,
because the old kernel cannot safely hand off TDX state to the new
kernel. Later TDX modules support the TDH.SYS.DISABLE SEAMCALL, which
provides a way to cleanly disable TDX and allow kexec to proceed.
The new SEAMCALL has an enumeration bit, but that is ignored. It is
expected that users will be using the latest TDX module, and the failure
mode for running the missing SEAMCALL on an older module is not fatal.
This can be a long running operation, and the time needed largely
depends on the amount of memory that has been allocated to TDs. If all
TDs have been destroyed prior to the sys_disable call, then it is fast,
with only needing to override the TDX module memory.
After the SEAMCALL completes, the TDX module is disabled and all memory
resources allocated to TDX are freed and reset. The next kernel can then
re-initialize the TDX module from scratch via the normal TDX bring-up
sequence.
The SEAMCALL can return two different error codes that expect a retry.
- TDX_INTERRUPTED_RESUMABLE can be returned in the case of a host
interrupt. However, it will not return until it makes some forward
progress, so we can expect to complete even in the case of interrupt
storms.
- TDX_SYS_BUSY will be returned on contention with other TDH.SYS.*
SEAMCALLs, however a side effect of TDH.SYS.DISABLE is that it will
block other SEAMCALLs once it gets going. So this contention will be
short lived.
So loop infinitely on either of these error codes, until success or other
error.
An error is printed if the SEAMCALL fails with anything other than the
error codes that cause retries, or 'synthesized' error codes produced
for #GP or #UD. e.g., an old module that has been properly initialized,
that doesn't implement SYS_DISABLE, returns TDX_OPERAND_INVALID. This
prints:
Rick Edgecombe [Thu, 2 Apr 2026 06:32:02 +0000 (00:32 -0600)]
x86/virt/tdx: Pull kexec cache flush logic into arch/x86
KVM tries to take care of some required cache flushing earlier in the
kexec path in order to be kind to some long standing races that can occur
later in the operation. Until recently, VMXOFF was handled within KVM.
Since VMX being enabled is required to make a SEAMCALL, it had the best
per-cpu scoped operation to plug the flushing into. So it is kicked off
from there.
This early kexec cache flushing in KVM happens via a syscore shutdown
callback. Now that VMX enablement control has moved to arch/x86, which has
grown its own syscore shutdown callback, it no longer make sense for it to
live in KVM. It fits better with the TDX enablement managing code.
In addition, future changes will add a SEAMCALL that happens immediately
before VMXOFF, which means the cache flush in KVM will be too late to
flush the cache before the last SEAMCALL. So move it to the newly added TDX
arch/x86 syscore shutdown handler.
Since tdx_cpu_flush_cache_for_kexec() is no longer needed by KVM, make it
static and remove the export. Since it is also not part of an operation
spread across disparate components, remove the redundant comments and
verbose naming.
In the existing KVM based code, CPU offline also funnels through
tdx_cpu_flush_cache_for_kexec(). Add an explicit WBINVD in
tdx_offline_cpu() as well, even though it may be redundant with WBINVD
done elsewhere during CPU offline (e.g. hlt_play_dead()). This avoids
relying on fragile code ordering for cache coherency safety.
[Vishal: add explicit WBINVD in tdx_offline_cpu()]
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org> Acked-by: Sean Christopherson <seanjc@google.com> Link: https://patch.msgid.link/20260402-fuller_tdx_kexec_support-v3-2-34438d7094bf@intel.com
They have some overlap that is already defined similarly. Reduce the
duplication by unifying the architectural error codes at:
asm/shared/tdx_errno.h
...and update the headers that contained the duplicated definitions to
include the new unified header.
"asm/shared" is used for sharing TDX code between the early compressed
code and the normal kernel code. While the compressed code for the guest
doesn't use these error code header definitions today, it does make the
types of calls that return the values they define. So place the defines in
"shared" location so that it can, but leave such cleanups for future
changes.
[Rick: enhance log]
[Vishal: reduce to a simple move of architectural defines only]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Acked-by: Sean Christopherson <seanjc@google.com> Link: https://patch.msgid.link/20260402-fuller_tdx_kexec_support-v3-1-34438d7094bf@intel.com
drm/xe/guc_pc: Reorder forcewake in xe_guc_pc_fini_hw()
xe_guc_pc_stop() doesn't perform any MMIO operation that requires
forcewake in it's code path. Move it before pc_set_cur_freq() which
writes to RPNSWREQ and actually requires it.
cdrom, scsi: sr: propagate read-only status to block layer via set_disk_ro()
The cdrom core never calls set_disk_ro() for a registered device, so
BLKROGET on a CD-ROM device always returns 0 (writable), even when the
drive has no write capabilities and writes will inevitably fail. This
causes problems for userspace that relies on BLKROGET to determine
whether a block device is read-only. For example, systemd's loop device
setup uses BLKROGET to decide whether to create a loop device with
LO_FLAGS_READ_ONLY. Without the read-only flag, writes pass through the
loop device to the CD-ROM and fail with I/O errors. systemd-fsck
similarly checks BLKROGET to decide whether to run fsck in no-repair
mode (-n).
The write-capability bits in cdi->mask come from two different sources:
CDC_DVD_RAM and CDC_CD_RW are populated by the driver from the MODE
SENSE capabilities page (page 0x2A) before register_cdrom() is called,
while CDC_MRW_W and CDC_RAM require the MMC GET CONFIGURATION command
and were only probed by cdrom_open_write() at device open time. This
meant that any attempt to compute the writable state from the full
mask at probe time was incorrect, because the GET CONFIGURATION bits
were still unset (and cdi->mask is initialized such that capabilities
are assumed present).
Fix this by factoring the GET CONFIGURATION probing out of
cdrom_open_write() into a new exported helper,
cdrom_probe_write_features(), and having sr call it from sr_probe()
right after get_capabilities() has populated the MODE SENSE bits.
register_cdrom() then calls set_disk_ro() based on the full
write-capability mask (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)
so the block layer reflects the drive's actual write support. The
feature queries used (CDF_MRW and CDF_RWRT via GET CONFIGURATION with
RT=00) report drive-level capabilities that are persistent across
media, so a single probe before register_cdrom() is sufficient and the
redundant probe at open time is dropped.
With set_disk_ro() now accurate, the long-vestigial cd->writeable flag
in sr can go: get_capabilities() used to set cd->writeable based on
the same four mask bits, but because CDC_MRW_W and CDC_RAM default to
"capability present" in cdi->mask and aren't touched by MODE SENSE,
the condition that gated cd->writeable was always true, making it
unconditionally 1. Replace the corresponding gate in sr_init_command()
with get_disk_ro(cd->disk), which turns a previously no-op check into
a real one and also catches kernel-internal bio writers that bypass
blkdev_write_iter()'s bdev_read_only() check.
The sd driver (SCSI disks) does not have this problem because it
checks the MODE SENSE Write Protect bit and calls set_disk_ro()
accordingly. The sr driver cannot use the same approach because the
MMC specification does not define the WP bit in the MODE SENSE
device-specific parameter byte for CD-ROM devices.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daan De Meyer <daan@amutable.com> Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://patch.msgid.link/20260427210139.1400-2-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'nvme-7.1-2026-04-24' of git://git.infradead.org/nvme into block-7.1
Pull NVMe fixes from Keith:
"- Target data transfer size confiruation (Aurelien)
- Enable P2P for RDMA (Shivaji Kant)
- TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
- TCP host updates (Alistair, Chaitanya)
- Authentication updates (Alistair, Daniel, Chris Leech)
- Multipath fixes (John Garry)
- New quirks (Alan Cui, Tao Jiang)
- Apple driver fix (Fedor Pchelkin)
- PCI admin doorbell update fix (Keith)"
* tag 'nvme-7.1-2026-04-24' of git://git.infradead.org/nvme: (22 commits)
nvme-auth: Hash DH shared secret to create session key
nvme-pci: fix missed admin queue sq doorbell write
nvme-auth: Include SC_C in RVAL controller hash
nvme-tcp: teardown circular locking fixes
nvmet-tcp: Don't clear tls_key when freeing sq
Revert "nvmet-tcp: Don't free SQ on authentication success"
nvme: skip trace completion for host path errors
nvme-pci: add quirk for Memblaze Pblaze5 (0x1c5f:0x0555)
nvme-multipath: put module reference when delayed removal work is canceled
nvme: expose TLS mode
nvme-apple: drop invalid put of admin queue reference count
nvme-core: fix parameter name in comment
nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free
nvme-multipath: drop head pointer check in nvme_mpath_clear_current_path()
nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808 (Samsung PM981/983/970 EVO Plus )
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet-tcp: remove redundant calls to nvmet_tcp_fatal_error()
nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers
nvme: enable PCI P2PDMA support for RDMA transport
nvmet: introduce new mdts configuration entry
...
Matt Roper [Fri, 24 Apr 2026 20:48:20 +0000 (13:48 -0700)]
drm/xe: Mark BCS engines as belonging to the GT forcewake domain
On all platforms supported by the Xe driver, BCS engines are part of the
GT forcewake domain, not the RENDER domain. Fix the engine list
definition to match the spec. This mistake didn't really cause any
real problems because the forcewake domain here was only used in a
couple assertions that aren't really necessary and included in the
information dumped during error capture.
Matt Roper [Fri, 24 Apr 2026 20:48:19 +0000 (13:48 -0700)]
drm/xe: Drop xe_hw_engine_mmio_write32()
xe_hw_engine_mmio_write32() is only used in a single place and is easily
replaced by a regular xe_mmio_write32() call. Register read/write
interfaces are already complicated enough with MCR vs non-MCR handling,
so we should avoid adding extra wrappers that just make it more
confusing what to use.
xe_hw_engine_mmio_write32() did have a forcewake assertion that we're
dropping here, but that assertion wasn't entirely correct anyway. It was
checking hwe->domain which is currently set to XE_FW_RENDER for the BCS
engine, even though BCS engines reside in the GT domain.
v2:
- Drop prototype in header file as well. (Shuicheng)
Matt Roper [Fri, 24 Apr 2026 20:48:18 +0000 (13:48 -0700)]
drm/xe: Drop unnecessary STOP_RING clearing
The STOP_RING bit in MI_MODE is already clear by default out of hardware
reset and will only be '1' if the driver intentionally sets it after
that.
The logic of clearing this bit appears to originate from very
early (pre-GuC, pre-execlist) code in i915 where we needed to stop the
ring before performing a host-initiated engine reset; after the reset
the STOP_RING bit needed to be cleared to allow execution to resume.
None of that is relevant to Xe (or even modern i915) since STOP_RING
isn't necessary for execlist-based engine resets (and even if it were,
Xe doesn't initiate any engine resets; the GuC handles that now).
Matt Roper [Fri, 24 Apr 2026 20:48:17 +0000 (13:48 -0700)]
drm/xe: Move GFX_MODE programming to RTP
The write GFX_MODE to disable engine "legacy mode" and to enable MSI-X
support was unnecessarily open-coded in xe_hw_engine_enable_ring();
it's preferable to do such programming in the engine_entries[] RTP table
since gets reflected/verified in debugfs, and will also automatically
ensure that the register is properly saved/restored around engine
resets. This also helps consolidate common logic that was duplicated
between the main driver initialization path and the dead-code execlist
initialization path.
This also allows us to drop GFX_MODE from the list of extra registers to
be added to the GuC ADS' save-restore list since all registers on the
RTP table are added automatically.
v2:
- Actually use the xe_rtp_match_has_msix match function added.
(Shuicheng)
Matt Roper [Fri, 24 Apr 2026 20:48:15 +0000 (13:48 -0700)]
drm/xe: Fix name and definition of GFX_MODE register
The register located at $base+0x29c is referred to as GFX_MODE in the
bspec. Although many other registers have RING_* prefixes for
historical reasons, this register does not, so using a name that does
not match the bspec just makes it harder to recognize/find.
Also, GFX_MODE is a masked register (updating bits [15:0] requires that
the corresponding bit(s) in [31:16] are also set), so add the
XE_REG_OPTION_MASKED flag to the register definition; this will become
important when we start programming this register via RTP tables in a
future patch.
Finally swap the order of the register's two bit definitions to match
our regular coding style of descending order for register bits/fields.
Matt Roper [Fri, 24 Apr 2026 20:48:14 +0000 (13:48 -0700)]
drm/xe: Move HWSTAM programming to RTP
The write to RING_HWSTAM to disable hardware status page writes on
interrupt was unnecessarily open-coded in xe_hw_engine_enable_ring();
it's preferable to do such programming in the engine_entries[] RTP table
since gets reflected/verified in debugfs, and will also automatically
ensure that the register is properly saved/restored around engine
resets.
In this case the HWSTAM register wasn't explicitly added to the GuC ADS'
save-restore list, so there was the potential for the value to be lost
on engine resets. This doesn't seem to have happened in practice, so
likely the GuC firmware is automatically saving/restoring this register
on our behalf, but we shouldn't rely on this implicit behavior going
forward.
One other slight change with this patch is that HWSTAM will now be
programmed on the vestigial execlist (non-GuC) initialization path.
Since the register's default value is 0x0 and the documentation
indicates that it's only legal to leave a single bit unmasked at a time,
this likely would have been an illegal situation if the execlist code
were actually usable.
Matt Roper [Fri, 24 Apr 2026 20:48:13 +0000 (13:48 -0700)]
drm/xe: Stop programming BLIT_CCTL on Xe2 and later platforms
Xe1 platforms used the BLIT_CCTL register to specify the MOCS value that
would be used for BCS engine instructions that did not have a way of
specifying a MOCS index directly. From Xe2 onward, all BCS instructions
now have explicit instruction fields for specifying a MOCS index and the
BLIT_CCTL register is now a dummy register with no valid fields.
Although continuing to write to it today has no effect, the register
could repurposed in future platforms, so restrict the BLIT_CCTL RTP
entry to only apply to Xe1 platforms.
Matt Roper [Fri, 24 Apr 2026 20:48:12 +0000 (13:48 -0700)]
drm/xe/rtp: Add "always true" match function
All RTP table entries are required to have at least one rule. In cases
where an entry should apply unconditionally across all platforms we've
been using a graphics version range of 12.00 - forever since this covers
all platforms supported by the driver. However if the primary GT is
disabled via configfs (not actually possible today, but probably
possible in the future) or if we have a future platform that lacks a
primary GT and only supports media/display, this rule would cause
important programming to fail to apply on the media GT.
Add a simple match function that just always returns true
unconditionally. This solves the worries above while also being more
immediately human-readable.
Matt Roper [Fri, 24 Apr 2026 20:48:11 +0000 (13:48 -0700)]
drm/xe: Move CCS enablement to engine setup RTP
Most register programming for engine setup happens via RTP tables in
hw_engine_setup_default_state(). Move the programming of RCU_MODE[0]
which enables the platform's CCS engine(s) there. This both makes the
code more consistent (other RCU_MODE register programming is already
happening in this RTP table) and improves debuggability (since RTP
contents and checks of their correct programming are exposed via
debugfs). It also helps consolidate the regular driver initialization
paths with the vestigial and currently unused execlist (i.e., non-GuC)
initialization.
With the original programming, the RCU_MODE register (which is a single
global register, not a per-engine register) was getting re-programmed
with the same value during the initialization of each CCS engine. When
moved to the RTP table, we use the xe_rtp_match_first_render_or_compute
match function so that it will just be programmed once, while doing the
initialization for the first RCS/CCS engine, which avoids the redundant
and unnecessary repetition.
We can also safely drop the explicit addition of RCU_MODE from the GuC
ADS save-restore list now since all registers programmed via RTP tables
are automatically added to the GuC's list.
v2:
- Only enable CCS engines on Xe_HP and later. Even though Xe_LP
platforms technically have a CCS engine, it's never been enabled on
i915 or Xe due to other issues on these old platforms.
ACPI: video: force native backlight on HP OMEN 16 (8A44)
The HP OMEN 16 Gaming Laptop (board name 8A44) has a mux-less hybrid
GPU configuration with AMD Rembrandt (Radeon 680M) and NVIDIA GA104
(RTX 3070 Ti). The internal eDP panel is wired to the AMD iGPU.
When Nouveau loads without GSP firmware, the ACPI video backlight
device (acpi_video0) gets registered alongside the native AMD
backlight (amdgpu_bl2). In this state, writes to amdgpu_bl2 update
the software brightness value but fail to change the physical panel
brightness.
Force native backlight to prevent acpi_video0 from registering.
Confirmed that booting with acpi_backlight=native resolves the
issue.
ACPI: TAD: RTC: Refine timer value computations and checks
Since rtc_tm_to_ktime() may overflow for large RTC time values and
full second granularity is sufficient in timer value computations
in acpi_tad_rtc_set_alarm() and acpi_tad_rtc_read_alarm(), use
rtc_tm_to_time64() instead of that function, which also allows the
computations to be simplified.
Moreover, U32_MAX is a special "timer disabled" value, so make
acpi_tad_rtc_set_alarm() reject it when attempting to program the
alarm timers.
Fixes: 7572dcabe38d ("ACPI: TAD: Add alarm support to the RTC class device interface") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://patch.msgid.link/3414608.aeNJFYEL58@rafael.j.wysocki
The code in acpi_tad_remove() needs to run after the unregistration of
the devres-managed RTC class device so that it doesn't race with the
class callbacks of the latter.
To make that happen, pass it to devm_add_action_or_reset() before
registering the RTC class device.
Fixes: 7572dcabe38d ("ACPI: TAD: Add alarm support to the RTC class device interface") Fixes: 8a1e7f4b1764 ("ACPI: TAD: Add RTC class device interface") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/14001754.uLZWGnKmhe@rafael.j.wysocki
Recent commit 93afe8ba9b01 ("ACPI: TAD: Use dev_groups in struct
device_driver") switched over the ACPI TAD driver to using device
attribute groups instead of creating and removing the device sysfs
attributes directly, but it might go one step farther and use the
__ATTRIBUTE_GROUPS() macro which would reduce the code size slightly.
Add devicetree changes to enable second Mobile Display Subsystem (mdss1),
Display Processing Unit(DPU), Display Port(DP), Display clock controller
(dispcc1) and eDP PHYs on the Qualcomm Lemans platform.
ACPI: CPPC: Fix related_cpus inconsistency during CPU hotplug
When concurrently bringing up and down two SMT threads of a physical
core, many warning call traces occur as below:
The issue timeline is as follows:
1. When the system starts,
cpufreq: CPU: 220, policy->related_cpus: 220-221, policy->cpus: 220-221
2. Offline CPU 220 and CPU 221.
3. Online CPU 220
- CPU 221 is now offline, as acpi_get_psd_map() use
for_each_online_cpu(), so the cpu_data->shared_cpu_map,
policy->cpus, and related_cpus has only CPU 220.
5. Online CPU 221, the below call trace occurs:
- Since CPU 220 and CPU 221 share one policy, and
policy->related_cpus = 220 after step 3, so CPU 221
is not in policy->related_cpus but
per_cpu(cpufreq_cpu_data, cpu221) is not NULL.
After reverting commit 56eb0c0ed345 ("ACPI: CPPC: Fix remaining
for_each_possible_cpu() to use online CPUs"), the issue disappeared.
The _PSD (P-State Dependency) defines the hardware-level dependency of
frequency control across CPU cores. Since this relationship is a physical
attribute of the hardware topology, it remains constant regardless of the
online or offline status of the CPUs.
Using for_each_online_cpu() in acpi_get_psd_map() is problematic. If a
CPU is offline, it will be excluded from the shared_cpu_map.
Consequently, if that CPU is brought online later, the kernel will fail
to recognize it as part of any shared frequency domain.
Switch back to for_each_possible_cpu() to ensure that all cores defined
in the ACPI tables are correctly mapped into their respective performance
domains from the start. This aligns with the logic of policy->related_cpus,
which must encompass all potentially available cores in the domain to
prevent logic gaps during CPU hotplug operations.
To resolve the original issue regarding the "nosmt" or "nosmt=force"
boot parameter, as send_pcc_cmd() function already does if (!desc)
continue, so reverting that loop back to for_each_possible_cpu() is ok,
only need to change the match_cpc_ptr NULL case in acpi_get_psd_map() to
continue as Sean suggested.
How to reproduce, on arm64 machine with SMT support which use acpi cppc
cpufreq driver:
bash test.sh 220 & bash test.sh 221 &
The test.sh is as below:
while true
do
echo 0 > /sys/devices/system/cpu/cpu${1}/online
sleep 0.5
cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus
echo 1 > /sys/devices/system/cpu/cpu${1}/online
cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus
done
The Motorola Edge 30 is a smartphone released in 2022.
This commit has the following features working:
- Display (simplefb)
- Touchscreen
- Power and volume buttons
- Storage (UFS 3.1)
- Battery (ADSP battmgr)
- USB (Type-C, 2.0, dual-role)
- Wi-Fi and Bluetooth (WCN6750 hw1.0)
Signed-off-by: Val Packett <val@packett.cool> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260403054417.167917-2-val@packett.cool Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64: dts: qcom: kaanapali: Add USB support for Kaanapali SoC
Add the base USB devicetree definitions for Kaanapali platform. The overall
chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
(rev. v8) and M31 eUSB2 PHY.
Add the generic "xiaomi,beryllium" compatible string after the
panel-specific one, so the compatible list follows the required
ordering from most specific to most generic.
This allows userspace to fall back to the generic Poco F1 compatible
when no panel-specific match is present. In particular, hexagonrpcd
relies on trying all compatible entries to derive the HexagonFS path,
and currently fails when the generic device string is missing.
This change modifies the DT ABI: systems describing the EBBG variant
will now also match on "xiaomi,beryllium", whereas previously only
the panel-specific compatible was exposed.
In practice, no upstream userspace distinguishes between Tianma and
EBBG panel variants. All known consumers rely only on the generic
device identification, and no panel-specific handling exists.
Therefore, enabling the generic fallback does not change effective
runtime behavior, but fixes userspace that depends on generic matching.
The previous state was incomplete, as it omitted the generic
device-compatible string required for proper fallback matching.
dt-bindings: arm: qcom: Document Xiaomi Poco F1 Tianma variant
Document the panel-specific compatible string for the Tianma variant
of the Xiaomi Poco F1:
- "xiaomi,beryllium-tianma"
and require the generic fallback compatible:
- "xiaomi,beryllium"
Update the binding to clarify that all panel variants must list the
variant-specific compatible first, followed by the generic device
compatible, in accordance with DT matching rules.
The previous binding documentation did not describe the Tianma variant
and did not clearly specify the required fallback compatible, which
resulted in inconsistent DTS implementations.
No functional differences are currently exposed between Tianma and EBBG
variants at the binding level; both rely on the same generic device
compatibility for software support.
Error types in EINJV2 use different bit positions for each flavor of
injection from legacy EINJ.
Two issues:
1) The address sanity checks in einj_error_inject() were skipped for
EINJV2 injections. Noted by sashiko[1]
2) __einj_error_trigger() failed to drop the entry of the target
physical address from the list of resources that need to be
requested.
Add a helper function that checks if an injection is to memory and use it
to solve each of these issues.
Note that the old test in __einj_error_trigger() checked that param2 was
not zero. This isn't needed because the sanity checks in einj_error_inject()
reject memory injections with param2 == 0.
Fixes: b47610296d17 ("ACPI: APEI: EINJ: Enable EINJv2 error injections") Reported-by: sashiko <sashiko@sashiko.dev> Reported-by: Herman Li <herman.li@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Tested-by: "Lai, Yi1" <yi1.lai@intel.com> Link: https://sashiko.dev/#/patchset/20260415163620.12957-1-tony.luck%40intel.com Reviewed-by: Jiaqi Yan <jiaqiyan@google.com> Reviewed-by: Zaid Alali <zaidal@os.amperecomputing.com> Link: https://patch.msgid.link/20260421150216.11666-3-tony.luck@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Matt Roper [Tue, 21 Apr 2026 21:18:34 +0000 (14:18 -0700)]
drm/xe: Steer MCR for NODE/L3BANK according to L3 fusing on Xe2/Xe3
Although the bspec currently indicates that steered reads/writes to L3
register ranges are never terminated for physically present instances
(regardless of fusing) on Xe2, it turns out this is information is
incorrect. The hardware architects have also confirmed that the current
documentation is wrong (or that possibly the wording was intended to be
interpreted in a different way), but have not yet provided an official
spec update.
All of our driver's writes to registers in these ranges are done as
multicast, so steering is not actually important to proper driver
operation; the only impact of this documentation mistake is that on some
fused-down SKUs where the first L3 bank is absent we're not able to
properly read back the values that were written to those registers to
confirm that the writes were applied correctly (e.g., when using the
register-save-restore-check debugfs interface).
Since we don't have an official spec update yet, let's assume that
Xe2/Xe3 use the same fuse => steering logic as Xe3p. I.e., remove
L3BANK and NODE register ranges from the "INSTANCE0" steering group and
add handle them with dedicated handling according to the L3 fuses. From
testing on various fused-down platforms this does appear to give proper
steering and fix the failures reported by IGT's
igt@xe_debugfs@check-gt-reg-sr test.
Kamal Wadhwa [Mon, 6 Apr 2026 13:35:55 +0000 (19:05 +0530)]
arm64: dts: qcom: fix temp-alarm probe failure for PMH0104 on Glymur
The temp-alarm driver probe is failing for the pmh0104 PMICs on glymur.
[ 3.999713] spmi-temp-alarm c426000.spmi:pmic@8:temp-alarm@a00: error -ENODEV: failed to register sensor
[ 4.015066] spmi-temp-alarm c426000.spmi:pmic@9:temp-alarm@a00: error -ENODEV: failed to register sensor
[ 4.033908] spmi-temp-alarm c437000.spmi:pmic@b:temp-alarm@a00: error -ENODEV: failed to register sensor
This happens because thermal zone associated with the temp alarm was
defined under the thermal zones parent node which had a typo (used `_` in
place of `-`). Correct the typo to fix probe failure.
Add necessary properties for ports node in SDM845 DB845c Navigation
mezzanine overlay to fix W=1 DTC warning:
sdm845-db845c-navigation-mezzanine.dtso:19.10-24.5: Warning (unit_address_vs_reg): /fragment@0/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property
Fixes: 30df676a31b7 ("arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260405-dts-qcom-w-1-fixes-v2-5-1f2c7b74a93f@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GXCLKCTL (Graphics GX Clock Controller) is a block dedicated to managing
clocks for the GPU subsystem on GX power domain. The GX clock controller
driver manages only the GX GDSC and the rest of the resources of the
controller are managed by the firmware.
We can use the existing kaanapali driver for Milos as well since the
GX_CLKCTL_GX_GDSC supported by the Linux driver requires the same
configuration.
dt-bindings: clock: qcom: document the Milos GX clock controller
Qualcomm GX(graphics) is a clock controller which has PLLs, clocks and
Power domains (GDSC), but the requirement from the SW driver is to use
the GDSC power domain from the clock controller to recover the GPU
firmware in case of any failure/hangs. The rest of the resources of the
clock controller are being used by the firmware of GPU. This module
exposes the GDSC power domains which helps the recovery of Graphics
subsystem.
Milos can reuse the qcom,kaanapali-gxclkctl.h header due to similarity
of the hardware block, and also reuse of the Linux driver.
Richard Acayan [Tue, 31 Mar 2026 19:44:37 +0000 (15:44 -0400)]
arm64: dts: qcom: sdm670-google-sargo: add imx355 front camera
The Sony IMX355 is the front camera on the Pixel 3a, mounted in portrait
mode. It is connected to CSIPHY1 and CCI I2C1, and uses MCLK2. Add
support for it.
Co-developed-by: Robert Mader <robert.mader@collabora.com> Signed-off-by: Robert Mader <robert.mader@collabora.com> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260331194437.41041-4-mailingradian@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Richard Acayan [Tue, 31 Mar 2026 19:44:36 +0000 (15:44 -0400)]
arm64: dts: qcom: sdm670: add camera mclk pins
The camera subsystem is added for the SoC common devicetree, but the
mclk pins should also be common across the SoC. Add the mclk pins for
the cameras.
Richard Acayan [Tue, 31 Mar 2026 19:44:35 +0000 (15:44 -0400)]
arm64: dts: qcom: sdm670: label the camss ports instead of endpoints
Endpoints cannot be pre-defined since commit dcf6fb89e6f7 ("media: qcom:
camss: remove a check for unavailable CAMSS endpoint") was applied,
probing all endpoint nodes and requiring them to have a remote. There is
no sensible remote in the SoC devicetree because camera sensors are
board-specific.
The ports are meant to be extended by a board devicetree in order to
define fully configured endpoints and connect the ports to camera
sensors. For nodes that are only meaningful if extended, labels are
usually assigned. Label these ports so they can be extended directly.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20260331194437.41041-2-mailingradian@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge branch '20260225-topic-wcn6855_pmu_dtbdings-v3-1-576ec5c4e631@oss.qualcomm.com' into arm64-for-7.2
Merge a change that drops the incorrectly added vddrfa1p8-supply to the
WCN6855 Bluetooth binding, so that it can go together with the
DeviceTree changes and avoid introducing new errors/warnings.
arm64: dts: qcom: milos: Reduce rmtfs_mem size to 2.5MiB
The rmtfs_mem region is currently sized at 6MiB but the default for
milos downstream is 2.5MiB. This causes remoteproc crashes on devices
that expect the smaller size:
modem_ac.c:281:Access Control Error: Could not protect the region specified:Start:e1f00000 End:e2180000, PID:1
Reduce the default to 2.5MiB to match the QCOM downstream config, and
override the size for FP6.
Abel Vesa [Mon, 23 Mar 2026 10:01:12 +0000 (12:01 +0200)]
arm64: dts: qcom: hamoa: Fix OPP tables for all DisplayPort controllers
According to internal documentation, the corners specific for each rate
from the DP link clock are:
- LOWSVS_D1 -> 19.2 MHz
- LOWSVS -> 270 MHz
- SVS -> 540 MHz (594 MHz in case of DP3)
- SVS_L1 -> 594 MHz
- NOM -> 810 MHz
- NOM_L1 -> 810 MHz
- TURBO -> 810 MHz
So fix all tables for each of the four controllers according to the
documentation, but since DP0 through DP2 have the same entries in their
tables, lets drop the DP1 and DP2 and have all of them share the DP0
table instead. However keep a separate table for the DP3 as it is
different for the SVS, compared to the rest of the controllers.
The 19.2 MHz @ LOWSVS_D1 isn't needed as it's not an actual working
frequency and the controller will never select it. So remove it.
projects / thirdparty / kernel / linux.git / log
