When CONFIG_FIXED_PHY is in a loadable module, the fec driver cannot be
built-in any more:
x86_64-linux-ld: vmlinux.o: in function `fec_enet_mii_probe':
fec_main.c:(.text+0xc4f367): undefined reference to `fixed_phy_unregister'
x86_64-linux-ld: vmlinux.o: in function `fec_enet_close':
fec_main.c:(.text+0xc59591): undefined reference to `fixed_phy_unregister'
x86_64-linux-ld: vmlinux.o: in function `fec_enet_mii_probe.cold':
Select the fixed phy support on all targets to make this build
correctly, not just on coldfire.
Notat that Essentially the stub helpers in include/linux/phy_fixed.h
cannot be used correctly because of this build time dependency,
and we could just remove them to hit the build failure more often
when a driver uses them without the 'select FIXED_PHY'.
Fixes: dc86b621e1b4 ("net: fec: register a fixed phy using fixed_phy_register_100fd if needed") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260402141048.2713445-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gerd Bayer [Mon, 30 Mar 2026 13:09:45 +0000 (15:09 +0200)]
PCI: Enable AtomicOps only if Root Port supports them
When inspecting the config space of a Connect-X physical function in an
s390 system after it was initialized by the mlx5_core device driver, we
found the function to be enabled to request AtomicOps despite the Root Port
lacking support for completing them:
On s390 and many virtualized guests, the Endpoint is visible but the Root
Port is not. In this case, pci_enable_atomic_ops_to_root() previously
enabled AtomicOps in the Endpoint even though it can't tell whether the
Root Port supports them as a completer.
Change pci_enable_atomic_ops_to_root() to fail if there's no Root Port or
the Root Port doesn't support AtomicOps.
Fixes: 430a23689dea ("PCI: Add pci_enable_atomic_ops_to_root()") Reported-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
[bhelgaas: commit log, check RP first to simplify flow] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260330-fix_pciatops-v7-2-f601818417e8@linux.ibm.com
Gerd Bayer [Mon, 30 Mar 2026 13:09:44 +0000 (15:09 +0200)]
PCI: Do not enable AtomicOps by RCiEPs
Since Root Complex Integrated Endpoints (RCiEPs) attach to a bus that has
no bridge device describing the Root Port, the capability to complete
AtomicOps requests cannot be determined with PCIe methods.
Change default of pci_enable_atomic_ops_to_root() to not enable AtomicOps
requests on RCiEPs.
As far as we know, there are no RCiEPs that need AtomicOps (see Link
below).
The clocks for qcom-ethqos return a rate of zero as firmware manages
their rate. According to hardware documentation, the clock which is
fed to the slave AHB interface can range between 50 to 100MHz for
non-RGMII and 30 to 75MHz for boards with a RGMII interfaces.
Currently, stmmac uses an undefined divisor value. Instead, use
STMMAC_CSR_60_100M which will mean we meet IEEE 802.3 specification
since this will generate:
Unfortunately, this divisor makes the upper bound of both ranges exeed
the IEEE 802.3 specification, and thus we can not use it without knowing
for certain what the current CSR clock rate actually is.
So, STMMAC_CSR_60_100M is the best fit for all boards based on the
information provided thus far.
stmmac: cleanup dead dependencies on STMMAC_PLATFORM and STMMAC_ETH in Kconfig
There are already 'if STMMAC_ETH' and 'STMMAC_PLATFORM'
conditions wrapping these config options, making the
'depends on' statements duplicate dependencies (dead code).
I propose leaving the outer 'if STMMAC_PLATFORM...endif' and
'if STMMAC_ETH...endif' conditions, and removing the
individual 'depends on' statements.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
tcf_csum_act() walks nested VLAN headers directly from skb->data when an
skb still carries in-payload VLAN tags. The current code reads
vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without
first ensuring that the full VLAN header is present in the linear area.
If only part of an inner VLAN header is linearized, accessing
h_vlan_encapsulated_proto reads past the linear area, and the following
skb_pull(VLAN_HLEN) may violate skb invariants.
Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and
pulling each nested VLAN header. If the header still is not fully
available, drop the packet through the existing error path.
Fixes: 2ecba2d1e45b ("net: sched: act_csum: Fix csum calc for tagged packets") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Ruide Cao <caoruide123@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/22df2fcb49f410203eafa5d97963dd36089f4ecf.1774892775.git.caoruide123@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Miguel Ojeda [Tue, 31 Mar 2026 20:58:49 +0000 (22:58 +0200)]
rust: macros: simplify `format!` arguments
Clippy in Rust 1.88.0 (only) reported [1] up to the previous commit:
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:112:23
|
112 | let content = format!("{param}:{content}", param = param, content = content);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
= note: `-W clippy::uninlined-format-args` implied by `-W clippy::all`
= help: to override `-W clippy::all` add `#[allow(clippy::uninlined_format_args)]`
help: change this to
|
112 - let content = format!("{param}:{content}", param = param, content = content);
112 + let content = format!("{param}:{content}");
The reason it only triggers in that version is that the lint was moved
from `pedantic` to `style` in Rust 1.88.0 and then back to `pedantic`
in Rust 1.89.0 [2][3].
In this case, the suggestion is fair and a pure simplification, thus
just apply it.
In addition, do the same for another place in the file that Clippy does
not report because it is multi-line.
Paul Moore [Thu, 1 Jan 2026 22:19:18 +0000 (17:19 -0500)]
selinux: fix overlayfs mmap() and mprotect() access checks
The existing SELinux security model for overlayfs is to allow access if
the current task is able to access the top level file (the "user" file)
and the mounter's credentials are sufficient to access the lower
level file (the "backing" file). Unfortunately, the current code does
not properly enforce these access controls for both mmap() and mprotect()
operations on overlayfs filesystems.
This patch makes use of the newly created security_mmap_backing_file()
LSM hook to provide the missing backing file enforcement for mmap()
operations, and leverages the backing file API and new LSM blob to
provide the necessary information to properly enforce the mprotect()
access controls.
Cc: stable@vger.kernel.org Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Paul Moore [Fri, 19 Dec 2025 18:18:22 +0000 (13:18 -0500)]
lsm: add backing_file LSM hooks
Stacked filesystems such as overlayfs do not currently provide the
necessary mechanisms for LSMs to properly enforce access controls on the
mmap() and mprotect() operations. In order to resolve this gap, a LSM
security blob is being added to the backing_file struct and the following
new LSM hooks are being created:
The first two hooks are to manage the lifecycle of the LSM security blob
in the backing_file struct, while the third provides a new mmap() access
control point for the underlying backing file. It is also expected that
LSMs will likely want to update their security_file_mprotect() callback
to address issues with their mprotect() controls, but that does not
require a change to the security_file_mprotect() LSM hook.
There are a three other small changes to support these new LSM hooks:
* Pass the user file associated with a backing file down to
alloc_empty_backing_file() so it can be included in the
security_backing_file_alloc() hook.
* Add getter and setter functions for the backing_file struct LSM blob
as the backing_file struct remains private to fs/file_table.c.
* Constify the file struct field in the LSM common_audit_data struct to
better support LSMs that need to pass a const file struct pointer into
the common LSM audit code.
Thanks to Arnd Bergmann for identifying the missing EXPORT_SYMBOL_GPL()
and supplying a fixup.
Cc: stable@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-unionfs@vger.kernel.org Cc: linux-erofs@lists.ozlabs.org Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
Amir Goldstein [Mon, 30 Mar 2026 08:27:51 +0000 (10:27 +0200)]
fs: prepare for adding LSM blob to backing_file
In preparation to adding LSM blob to backing_file struct, factor out
helpers init_backing_file() and backing_file_free().
Cc: stable@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-unionfs@vger.kernel.org Cc: linux-erofs@lists.ozlabs.org Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Serge Hallyn <serge@hallyn.com>
[PM: use the term "LSM blob", fix comment style to match file] Signed-off-by: Paul Moore <paul@paul-moore.com>
Merge tag 'sched_ext-for-7.0-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"These are late but both fix subtle yet critical problems and the blast
radius is limited strictly to sched_ext.
- Fix stale direct dispatch state in ddsp_dsq_id which can cause
spurious warnings in mark_direct_dispatch() on task wakeup
- Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
configs which can lead to incorrectly dispatching migration-
disabled tasks to remote CPUs"
* tag 'sched_ext-for-7.0-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
Pengjie Zhang [Tue, 16 Dec 2025 03:11:53 +0000 (11:11 +0800)]
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
Previously, non-generic attributes (polling_interval, timer) used separate
create/delete logic, leading to race conditions during concurrent access in
creation/deletion. Multi-threaded operations also caused inconsistencies
between governor capabilities and attribute states.
1.Use is_visible + sysfs_update_group() to unify management of these
attributes, eliminating creation/deletion races.
2.Add locks and validation to these attributes, ensuring consistency
between current governor capabilities and attribute operations in
multi-threaded environments.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com> Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://www.spinics.net/lists/kernel/msg5967745.html
Since the sensor supports different sampling intervals via
bits CR0 and CR1 from the CONFIG register, add support in
order for the conversion rate to be changed from user space.
Default is 4 conv/sec.
Sergio Melas [Fri, 27 Mar 2026 22:16:02 +0000 (23:16 +0100)]
hwmon: (yogafan) Add support for Lenovo Yoga/Legion fan monitoring
This driver provides fan speed monitoring for Lenovo Yoga, Legion, and
IdeaPad laptops by interfacing with the Embedded Controller (EC) via ACPI.
To address low-resolution sampling in Lenovo EC firmware, a Rate-Limited
Lag (RLLag) filter is implemented. The filter ensures a consistent physical
curve regardless of userspace polling frequency.
Hardware identification is performed via DMI-based quirk tables, which
map specific ACPI object paths and register widths (8-bit vs 16-bit)
deterministically.
7e0ffb72de8a ("sched_ext: Fix stale direct dispatch state in
ddsp_dsq_id")
which clears ddsp state at individual call sites instead of
dispatch_enqueue(), and sub-sched related code reorg and API updates on
for-7.1. Resolved by applying the ddsp fix with for-7.1's signatures.
Software nodes depend on kernel_kobj which is initialized pretty late
into the boot process - as a core_initcall(). Ahead of moving the
software node initialization to driver_init() we must first make
kernel_kobj available before it.
Make ksysfs_init() visible in a new header - ksysfs.h - and call it in
do_basic_setup() right before driver_init().
Merge tag 'spi-fix-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes, mostly probe/remove issues that are the
result of Felix Gu going and auditing those areas, plus one error
handling fix for the Cadence QSPI driver"
* tag 'spi-fix-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-qspi: Fix exec_mem_op error handling
spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback
spi: stm32-ospi: Fix DMA channel leak on stm32_ospi_dma_setup() failure
spi: stm32-ospi: Fix reset control leak on probe error
spi: stm32-ospi: Fix resource leak in remove() callback
Andrea Righi [Fri, 3 Apr 2026 06:57:20 +0000 (08:57 +0200)]
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
@p->scx.ddsp_dsq_id can be left set (non-SCX_DSQ_INVALID) triggering a
spurious warning in mark_direct_dispatch() when the next wakeup's
ops.select_cpu() calls scx_bpf_dsq_insert(), such as:
WARNING: kernel/sched/ext.c:1273 at scx_dsq_insert_commit+0xcd/0x140
The root cause is that ddsp_dsq_id was only cleared in dispatch_enqueue(),
which is not reached in all paths that consume or cancel a direct dispatch
verdict.
Fix it by clearing it at the right places:
- direct_dispatch(): cache the direct dispatch state in local variables
and clear it before dispatch_enqueue() on the synchronous path. For
the deferred path, the direct dispatch state must remain set until
process_ddsp_deferred_locals() consumes them.
- process_ddsp_deferred_locals(): cache the dispatch state in local
variables and clear it before calling dispatch_to_local_dsq(), which
may migrate the task to another rq.
- do_enqueue_task(): clear the dispatch state on the enqueue path
(local/global/bypass fallbacks), where the direct dispatch verdict is
ignored.
- dequeue_task_scx(): clear the dispatch state after dispatch_dequeue()
to handle both the deferred dispatch cancellation and the holding_cpu
race, covering all cases where a pending direct dispatch is
cancelled.
- scx_disable_task(): clear the direct dispatch state when
transitioning a task out of the current scheduler. Waking tasks may
have had the direct dispatch state set by the outgoing scheduler's
ops.select_cpu() and then been queued on a wake_list via
ttwu_queue_wakelist(), when SCX_OPS_ALLOW_QUEUED_WAKEUP is set. Such
tasks are not on the runqueue and are not iterated by scx_bypass(),
so their direct dispatch state won't be cleared. Without this clear,
any subsequent SCX scheduler that tries to direct dispatch the task
will trigger the WARN_ON_ONCE() in mark_direct_dispatch().
Fixes: 5b26f7b920f7 ("sched_ext: Allow SCX_DSQ_LOCAL_ON for direct dispatches") Cc: stable@vger.kernel.org # v6.12+ Cc: Daniel Hodges <hodgesd@meta.com> Cc: Patrick Somaru <patsomaru@meta.com> Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Merge tag 'pm-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a potential NULL pointer dereference in the energy model
netlink interface and a potential double free in an error path in
the common cpufreq governor management code:
- Fix a NULL pointer dereference in the energy model netlink
interface that may occur if a given perf domain ID is not
recognized (Changwoo Min)
- Avoid double free in the cpufreq_dbs_governor_init() error
path when kobject_init_and_add() fails (Guangshuo Li)"
* tag 'pm-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path
PM: EM: Fix NULL pointer dereference when perf domain ID is not found
Merge tag 'thermal-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Address potential races between thermal zone removal and system
resume that may lead to a use-after-free (in two different ways)
and a potential use-after-free in the thermal zone unregistration
path (Rafael Wysocki)"
* tag 'thermal-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix thermal zone device registration error path
thermal: core: Address thermal zone removal races with resume
Koichiro Den [Fri, 20 Mar 2026 14:01:39 +0000 (23:01 +0900)]
misc: pci_endpoint_test: Use -EINVAL for small subrange size
The sub_size check ensures that each subrange is large enough for 32-bit
accesses. Subranges smaller than sizeof(u32) do not satisfy this
assumption, so this is a local sanity check rather than a resource
exhaustion case.
Merge tag 'gpio-fixes-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix kerneldocs for gpio-timberdale and gpio-nomadik
- clear the "requested" flag in error path in gpiod_request_commit()
- call of_xlate() if provided when setting up shared GPIOs
- handle pins shared by child firmware nodes of consumer devices
- fix return value check in gpio-qixis-fpga
- fix suspend on gpio-mxc
- fix gpio-microchip DT bindings
* tag 'gpio-fixes-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
dt-bindings: gpio: fix microchip #interrupt-cells
gpio: shared: shorten the critical section in gpiochip_setup_shared()
gpio: mxc: map Both Edge pad wakeup to Rising Edge
gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio()
gpio: shared: handle pins shared by child nodes of devices
gpio: shared: call gpio_chip::of_xlate() if set
gpiolib: clear requested flag if line is invalid
gpio: nomadik: repair some kernel-doc comments
gpio: timberdale: repair kernel-doc comments
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
v1->v2:
. fixed bugs spotted by Eduard, Mykyta, claude and gemini
. fixed selftests that were failing in unpriv
. gemini(sashiko) found several precision improvements in patch 6,
but they made no difference in real programs.
v1: https://lore.kernel.org/bpf/20260401021635.34636-1-alexei.starovoitov@gmail.com/
First 6 prep patches for static stack liveness.
. do src/dst_reg validation early and remove defensive checks
. sort subprog in topo order. We wanted to do this long ago
to process global subprogs this way and in other cases.
. Add constant folding pass that computes map_ptr, subprog_idx,
loads from readonly maps, and other constants that fit into 32-bit
. Use these constants to eliminate dead code. Replace predicted
conditional branches with "jmp always". That reduces JIT prog size.
. Add two helpers that return access size from their arguments.
====================
bpf: Add helper and kfunc stack access size resolution
The static stack liveness analysis needs to know how many bytes a
helper or kfunc accesses through a stack pointer argument, so it can
precisely mark the affected stack slots as stack 'def' or 'use'.
Add bpf_helper_stack_access_bytes() and bpf_kfunc_stack_access_bytes()
which resolve the access size for a given call argument.
bpf: Add bpf_compute_const_regs() and bpf_prune_dead_branches() passes
Add two passes before the main verifier pass:
bpf_compute_const_regs() is a forward dataflow analysis that tracks
register values in R0-R9 across the program using fixed-point
iteration in reverse postorder. Each register is tracked with
a six-state lattice:
At merge points, if two paths produce the same state and value for
a register, it stays; otherwise it becomes UNKNOWN.
The analysis handles:
- MOV, ADD, SUB, AND with immediate or register operands
- LD_IMM64 for plain constants, map FDs, map values, and subprogs
- LDX from read-only maps: constant-folds the load by reading the
map value directly via bpf_map_direct_read()
Results that fit in 32 bits are stored per-instruction in
insn_aux_data and bitmasks.
bpf_prune_dead_branches() uses the computed constants to evaluate
conditional branches. When both operands of a conditional jump are
known constants, the branch outcome is determined statically and the
instruction is rewritten to an unconditional jump.
The CFG postorder is then recomputed to reflect new control flow.
This eliminates dead edges so that subsequent liveness analysis
doesn't propagate through dead code.
Also add runtime sanity check to validate that precomputed
constants match the verifier's tracked state.
selftests/bpf: Add tests for subprog topological ordering
Add few tests for topo sort:
- linear chain: main -> A -> B
- diamond: main -> A, main -> B, A -> C, B -> C
- mixed global/static: main -> global -> static leaf
- shared callee: main -> leaf, main -> global -> leaf
- duplicate calls: main calls same subprog twice
- no calls: single subprog
bpf: Sort subprogs in topological order after check_cfg()
Add a pass that sorts subprogs in topological order so that iterating
subprog_topo_order[] walks leaf subprogs first, then their callers.
This is computed as a DFS post-order traversal of the CFG.
The pass runs after check_cfg() to ensure the CFG has been validated
before traversing and after postorder has been computed to avoid
walking dead code.
Merge tag 'drm-fixes-2026-04-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Hopefully no Easter eggs in this bunch of fixes. Usual stuff across
the amd/intel with some misc bits. Thanks to Thorsten and Alex for
making sure a regression fix that was hanging around in process land
finally made it in, that is probably the biggest change in here.
core:
- revert unplug/framebuffer fix as it caused problems
- compat ioctl speculation fix
i915:
- Fix for #12045: Huawei Matebook E (DRR-WXX): Persistent Black
Screen on Boot with i915 and Gen11: Modesetting and Backlight
Control Malfunction
- Fix for #15826: i915: Raptor Lake-P [UHD Graphics] display
flicker/corruption on eDP panel
- Use crtc_state->enhanced_framing properly on ivb/hsw CPU eDP
xe:
- uapi: Accept canonical GPU addresses in xe_vm_madvise_ioctl
- Disallow writes to read-only VMAs
- PXP fixes
- Disable garbage collector work item on SVM close
- void memory allocations in xe_device_declare_wedged
qaic:
- hang fix
ast:
- initialisation fix"
* tag 'drm-fixes-2026-04-03' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amd/display: Wire up dcn10_dio_construct() for all pre-DCN401 generations
drm/ioc32: stop speculation on the drm_compat_ioctl path
drm/sysfb: Fix efidrm error handling and memory type mismatch
drm/i915/dp: Use crtc_state->enhanced_framing properly on ivb/hsw CPU eDP
drm/i915/cdclk: Do the full CDCLK dance for min_voltage_level changes
drm/amdkfd: Fix queue preemption/eviction failures by aligning control stack size to GPU page size
drm/amdgpu: Fix wait after reset sequence in S4
drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw()
drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB
drm/amdgpu/userq: fix memory leak in MQD creation error paths
drm/amd: Fix MQD and control stack alignment for non-4K
drm/amdkfd: Align expected_queue_size to PAGE_SIZE
drm/amdgpu: fix the idr allocation flags
drm/amdgpu: validate doorbell_offset in user queue creation
drm/amdgpu/pm: drop SMU driver if version not matched messages
drm/xe: Avoid memory allocations in xe_device_declare_wedged()
drm/xe: Disable garbage collector work item on SVM close
drm/xe/pxp: Don't allow PXP on older PTL GSC FWs
drm/xe/pxp: Clear restart flag in pxp_start after jumping back
drm/xe/pxp: Remove incorrect handling of impossible state during suspend
...
This series fixes MCLK resource leaks in the platform_clock_control()
implementations for bytcr_rt5640, bytcr_rt5651, and cht_bsw_rt5672.
In the SND_SOC_DAPM_EVENT_ON() path, clk_prepare_enable() is called to
enable MCLK, but subsequent failures in codec clock configuration (eg:
*_prepare_and_enable_pll1() or snd_soc_dai_set_sysclk()) return without
disabling the clock, leaking a reference.
Patches 1-3 fix this by adding the missing clk_disable_unprepare() calls
in the relevant error paths, ensuring proper symmetry between enable and
disable operations within the EVENT_ON scope.
Patch 4 moves unrelated logging changes into a separate patch and
standardizes error messages.
ASoC: Intel: Standardize MCLK error logs across RT boards
Standardize the error logging in platform_clock_control() by adding
missing newline characters to dev_err() strings. Additionally, include
the return code in the error messages to assist with debugging.
ASoC: Intel: cht_bsw_rt5672: Fix MCLK leak on platform_clock_control error
If snd_soc_dai_set_pll() or snd_soc_dai_set_sysclk() fail inside the
EVENT_ON path, the function returns without calling
clk_disable_unprepare() on ctx->mclk, which was already enabled earlier
in the same code path. Add the missing clk_disable_unprepare() calls
before returning the error.
ASoC: Intel: bytcr_rt5651: Fix MCLK leak on platform_clock_control error
If byt_rt5651_prepare_and_enable_pll1() fails, the function returns
without calling clk_disable_unprepare() on priv->mclk, which was
already enabled earlier in the same code path. Add the missing
cleanup call to prevent the clock from leaking.
ASoC: Intel: bytcr_rt5640: Fix MCLK leak on platform_clock_control error
If byt_rt5640_prepare_and_enable_pll1() fails, the function returns
without calling clk_disable_unprepare() on priv->mclk, which was
already enabled earlier in the same code path. Add the missing
cleanup call to prevent the clock from leaking.
Chancel Liu [Thu, 26 Mar 2026 05:56:14 +0000 (14:56 +0900)]
ASoC: imx-rpmsg: Add DSD format support with dynamic DAI format switching
Add hw_params callback to dynamically switch DAI format between I2S
and PDM based on audio stream format. When DSD formats are detected,
the DAI format is switched to PDM mode.
Niranjan H Y [Wed, 1 Apr 2026 13:21:45 +0000 (18:51 +0530)]
ASoC: SDCA: Export Q7.8 volume control helpers
Export the Q7.8 volume control helpers to allow reuse
by other ASoC drivers. These functions handle 16-bit
signed Q7.8 fixed-point format values for volume controls.
Changes include:
- Rename q78_get_volsw to sdca_asoc_q78_get_volsw
- Rename q78_put_volsw to sdca_asoc_q78_put_volsw
- Add a convenience macro SDCA_SINGLE_Q78_TLV and
SDCA_DOUBLE_Q78_TLV for creating mixer controls
This allows other ASoC drivers to easily implement controls
using the Q7.8 fixed-point format without duplicating code.
Chi Zhiling [Fri, 3 Apr 2026 08:05:38 +0000 (16:05 +0800)]
exfat: use exfat_chain_advance helper
Replace open-coded cluster chain walking logic with exfat_chain_advance()
across exfat_readdir, exfat_find_dir_entry, exfat_count_dir_entries,
exfat_search_empty_slot and exfat_check_dir_empty.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Chi Zhiling [Fri, 3 Apr 2026 08:05:37 +0000 (16:05 +0800)]
exfat: introduce exfat_chain_advance helper
Introduce exfat_chain_advance() to walk a exfat_chain structure by a
given step, updating both ->dir and ->size fields atomically. This
helper handles both ALLOC_NO_FAT_CHAIN and ALLOC_FAT_CHAIN modes with
proper boundary checking.
Suggested-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Chi Zhiling [Fri, 3 Apr 2026 08:05:35 +0000 (16:05 +0800)]
exfat: use exfat_cluster_walk helper
Replace the custom exfat_walk_fat_chain() function and open-coded
FAT chain walking logic with the exfat_cluster_walk() helper across
exfat_find_location, __exfat_get_dentry_set, and exfat_map_cluster.
Suggested-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Chi Zhiling [Fri, 3 Apr 2026 08:05:34 +0000 (16:05 +0800)]
exfat: introduce exfat_cluster_walk helper
Introduce exfat_cluster_walk() to walk the FAT chain by a given step,
handling both ALLOC_NO_FAT_CHAIN and ALLOC_FAT_CHAIN modes. Also
redefine exfat_get_next_cluster as a thin wrapper around it for
backward compatibility.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Chi Zhiling [Fri, 3 Apr 2026 08:05:33 +0000 (16:05 +0800)]
exfat: fix incorrect directory checksum after rename to shorter name
When renaming a file in-place to a shorter name, exfat_remove_entries
marks excess entries as DELETED, but es->num_entries is not updated
accordingly. As a result, exfat_update_dir_chksum iterates over the
deleted entries and computes an incorrect checksum.
This does not lead to persistent corruption because mark_inode_dirty()
is called afterward, and __exfat_write_inode later recomputes the
checksum using the correct num_entries value.
Fix by setting es->num_entries = num_entries in exfat_init_ext_entry.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Denis Rastyogin [Fri, 27 Mar 2026 10:33:11 +0000 (13:33 +0300)]
ASoC: rsnd: Fix potential out-of-bounds access of component_dais[]
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 547b02f74e4a ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2") Signed-off-by: Denis Rastyogin <gerben@altlinux.org> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20260327103311.459239-1-gerben@altlinux.org Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there is no mechanism to read dmic_num in mach_params
structure. In this scenario mach_params->dmic_num check always
returns 0.
Remove unnecessary condition check for mach_params->dmic_num.
Kan Liang [Fri, 27 Mar 2026 05:28:44 +0000 (13:28 +0800)]
perf/x86/msr: Make SMI and PPERF on by default
The MSRs, SMI_COUNT and PPERF, are model-specific MSRs. A very long
CPU ID list is maintained to indicate the supported platforms. With more
and more platforms being introduced, new CPU IDs have to be kept adding.
Also, the old kernel has to be updated to apply the new CPU ID.
The MSRs have been introduced for a long time. There is no plan to
change them in the near future. Furthermore, the current code utilizes
rdmsr_safe() to check the availability of MSRs before using it.
Make them on by default. It should be good enough to only rely on the
rdmsr_safe() to check their availability for both existing and future
platforms.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260327052844.818218-1-dapeng1.mi@linux.intel.com
Vincent Guittot [Tue, 31 Mar 2026 16:23:52 +0000 (18:23 +0200)]
sched/fair: Prevent negative lag increase during delayed dequeue
Delayed dequeue feature aims to reduce the negative lag of a dequeued
task while sleeping but it can happens that newly enqueued tasks will
move backward the avg vruntime and increase its negative lag.
When the delayed dequeued task wakes up, it has more neg lag compared
to being dequeued immediately or to other tasks that have been
dequeued just before theses new enqueues.
Ensure that the negative lag of a delayed dequeued task doesn't
increase during its delayed dequeued phase while waiting for its neg
lag to diseappear. Similarly, we remove any positive lag that the
delayed dequeued task could have gain during thsi period.
Short slice tasks are particularly impacted in overloaded system.
Vincent Guittot [Fri, 27 Mar 2026 13:20:13 +0000 (14:20 +0100)]
sched/fair: Use sched_energy_enabled()
Use helper sched_energy_enabled() everywhere we want to test if EAS is
enabled instead of mixing sched_energy_enabled() and direct call to
static_branch_unlikely().
Add logic to handle migrating a blocked waiter to a remote
cpu where the lock owner is runnable.
Additionally, as the blocked task may not be able to run
on the remote cpu, add logic to handle return migration once
the waiting task is given the mutex.
Because tasks may get migrated to where they cannot run, also
modify the scheduling classes to avoid sched class migrations on
mutex blocked tasks, leaving find_proxy_task() and related logic
to do the migrations and return migrations.
This was split out from the larger proxy patch, and
significantly reworked.
Credits for the original patch go to:
Peter Zijlstra (Intel) <peterz@infradead.org>
Juri Lelli <juri.lelli@redhat.com>
Valentin Schneider <valentin.schneider@arm.com>
Connor O'Brien <connoro@google.com>
John Stultz [Tue, 24 Mar 2026 19:13:24 +0000 (19:13 +0000)]
sched: Move attach_one_task and attach_task helpers to sched.h
The fair scheduler locally introduced attach_one_task() and
attach_task() helpers, but these could be generically useful so
move this code to sched.h so we can use them elsewhere.
One minor tweak made to utilize guard(rq_lock)(rq) to simplifiy
the function.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://patch.msgid.link/20260324191337.1841376-10-jstultz@google.com
John Stultz [Tue, 24 Mar 2026 19:13:23 +0000 (19:13 +0000)]
sched: Add logic to zap balance callbacks if we pick again
With proxy-exec, a task is selected to run via pick_next_task(),
and then if it is a mutex blocked task, we call find_proxy_task()
to find a runnable owner. If the runnable owner is on another
cpu, we will need to migrate the selected donor task away, after
which we will pick_again can call pick_next_task() to choose
something else.
However, in the first call to pick_next_task(), we may have
had a balance_callback setup by the class scheduler. After we
pick again, its possible pick_next_task_fair() will be called
which calls sched_balance_newidle() and sched_balance_rq().
This is because if a RT task was originally picked, it will
setup the rq->balance_callback with push_rt_tasks() via
set_next_task_rt().
Once the task is migrated away and we pick again, we haven't
processed any balance callbacks, so rq->balance_callback is not
in the same state as it was the first time pick_next_task was
called.
To handle this, add a zap_balance_callbacks() helper function
which cleans up the balance callbacks without running them. This
should be ok, as we are effectively undoing the state set in
the first call to pick_next_task(), and when we pick again,
the new callback can be configured for the donor task actually
selected.
John Stultz [Tue, 24 Mar 2026 19:13:22 +0000 (19:13 +0000)]
sched: Add assert_balance_callbacks_empty helper
With proxy-exec utilizing pick-again logic, we can end up having
balance callbacks set by the preivous pick_next_task() call left
on the list.
So pull the warning out into a helper function, and make sure we
check it when we pick again.
Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://patch.msgid.link/20260324191337.1841376-8-jstultz@google.com
John Stultz [Tue, 24 Mar 2026 19:13:21 +0000 (19:13 +0000)]
sched/locking: Add special p->blocked_on==PROXY_WAKING value for proxy return-migration
As we add functionality to proxy execution, we may migrate a
donor task to a runqueue where it can't run due to cpu affinity.
Thus, we must be careful to ensure we return-migrate the task
back to a cpu in its cpumask when it becomes unblocked.
Peter helpfully provided the following example with pictures:
"Suppose we have a ww_mutex cycle:
Where Task-A holds Mutex-1 and tries to acquire Mutex-2, and
where Task-B holds Mutex-2 and tries to acquire Mutex-1.
Then the blocked_on->owner chain will go in circles.
Task-A -> Mutex-2
^ |
| v
Mutex-1 <- Task-B
We need two things:
- find_proxy_task() to stop iterating the circle;
- the woken task to 'unblock' and run, such that it can
back-off and re-try the transaction.
Now, the current code [without this patch] does:
__clear_task_blocked_on();
wake_q_add();
And surely clearing ->blocked_on is sufficient to break the
cycle.
Suppose it is Task-B that is made to back-off, then we have:
Task-A -> Mutex-2 -> Task-B (no further blocked_on)
and it would attempt to run Task-B. Or worse, it could directly
pick Task-B and run it, without ever getting into
find_proxy_task().
Now, here is a problem because Task-B might not be runnable on
the CPU it is currently on; and because !task_is_blocked() we
don't get into the proxy paths, so nobody is going to fix this
up.
Ideally we would have dequeued Task-B alongside of clearing
->blocked_on, but alas, [the lock ordering prevents us from
getting the task_rq_lock() and] spoils things."
Thus we need more than just a binary concept of the task being
blocked on a mutex or not.
So allow setting blocked_on to PROXY_WAKING as a special value
which specifies the task is no longer blocked, but needs to
be evaluated for return migration *before* it can be run.
This will then be used in a later patch to handle proxy
return-migration.
John Stultz [Tue, 24 Mar 2026 19:13:20 +0000 (19:13 +0000)]
sched: Fix modifying donor->blocked on without proper locking
Introduce an action enum in find_proxy_task() which allows
us to handle work needed to be done outside the mutex.wait_lock
and task.blocked_lock guard scopes.
This ensures proper locking when we clear the donor's blocked_on
pointer in proxy_deactivate(), and the switch statement will be
useful as we add more cases to handle later in this series.
John Stultz [Tue, 24 Mar 2026 19:13:19 +0000 (19:13 +0000)]
locking: Add task::blocked_lock to serialize blocked_on state
So far, we have been able to utilize the mutex::wait_lock
for serializing the blocked_on state, but when we move to
proxying across runqueues, we will need to add more state
and a way to serialize changes to this state in contexts
where we don't hold the mutex::wait_lock.
So introduce the task::blocked_lock, which nests under the
mutex::wait_lock in the locking order, and rework the locking
to use it.
John Stultz [Tue, 24 Mar 2026 19:13:18 +0000 (19:13 +0000)]
sched: Fix potentially missing balancing with Proxy Exec
K Prateek pointed out that with Proxy Exec, we may have cases
where we context switch in __schedule(), while the donor remains
the same. This could cause balancing issues, since the
put_prev_set_next() logic short-cuts if (prev == next). With
proxy-exec prev is the previous donor, and next is the next
donor. Should the donor remain the same, but different tasks are
picked to actually run, the shortcut will have avoided enqueuing
the sched class balance callback.
So, if we are context switching, add logic to catch the
same-donor case, and trigger the put_prev/set_next calls to
ensure the balance callbacks get enqueued.
Closes: https://lore.kernel.org/lkml/20ea3670-c30a-433b-a07f-c4ff98ae2379@amd.com/ Reported-by: K Prateek Nayak <kprateek.nayak@amd.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260324191337.1841376-4-jstultz@google.com
Peter noted: Compilers are really bad (as in they utterly refuse)
optimizing (even when marked with __pure) the static branch
things, and will happily emit multiple identical in a row.
So pull out the one obvious sched_proxy_exec() branch in
__schedule() and remove some of the 'implicit' ones in that
path.
Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://patch.msgid.link/20260324191337.1841376-3-jstultz@google.com
John Stultz [Tue, 24 Mar 2026 19:13:16 +0000 (19:13 +0000)]
sched: Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
With proxy-execution, the scheduler selects the donor, but for
blocked donors, we end up running the lock owner.
This caused some complexity, because the class schedulers make
sure to remove the task they pick from their pushable task
lists, which prevents the donor from being migrated, but there
wasn't then anything to prevent rq->curr from being migrated
if rq->curr != rq->donor.
This was sort of hacked around by calling proxy_tag_curr() on
the rq->curr task if we were running something other then the
donor. proxy_tag_curr() did a dequeue/enqueue pair on the
rq->curr task, allowing the class schedulers to remove it from
their pushable list.
The dequeue/enqueue pair was wasteful, and additonally K Prateek
highlighted that we didn't properly undo things when we stopped
proxying, leaving the lock owner off the pushable list.
After some alternative approaches were considered, Peter
suggested just having the RT/DL classes just avoid migrating
when task_on_cpu().
So rework pick_next_pushable_dl_task() and the rt
pick_next_pushable_task() functions so that they skip over the
first pushable task if it is on_cpu.
Then just drop all of the proxy_tag_curr() logic.
Fixes: be39617e38e0 ("sched: Fix proxy/current (push,pull)ability") Closes: https://lore.kernel.org/lkml/e735cae0-2cc9-4bae-b761-fcb082ed3e94@amd.com/ Reported-by: K Prateek Nayak <kprateek.nayak@amd.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260324191337.1841376-2-jstultz@google.com
The newly added serdev code fails to link when serdev is turned off:
arm-linux-gnueabi-ld: drivers/power/sequencing/pwrseq-pcie-m2.o: in function `pwrseq_pcie_m2_remove_serdev':
pwrseq-pcie-m2.c:(.text+0xc8): undefined reference to `serdev_device_remove'
arm-linux-gnueabi-ld: drivers/power/sequencing/pwrseq-pcie-m2.o: in function `pwrseq_m2_pcie_notify':
pwrseq-pcie-m2.c:(.text+0x69c): undefined reference to `of_find_serdev_controller_by_node'
arm-linux-gnueabi-ld: pwrseq-pcie-m2.c:(.text+0x6f8): undefined reference to `serdev_device_alloc'
arm-linux-gnueabi-ld: pwrseq-pcie-m2.c:(.text+0x724): undefined reference to `serdev_device_add'
power: sequencing: pcie-m2: enforce PCI and OF dependencies
The driver fails to build when PCI is disabled:
drivers/power/sequencing/pwrseq-pcie-m2.c: In function 'pwrseq_pcie_m2_register_notifier':
drivers/power/sequencing/pwrseq-pcie-m2.c:368:54: error: 'pci_bus_type' undeclared (first use in this function); did you mean 'pci_pcie_type'?
368 | ret = bus_register_notifier(&pci_bus_type, &ctx->nb);
| ^~~~~~~~~~~~
| pci_pcie_type
Similarly, when CONFIG_OF is disabled:
drivers/power/sequencing/pwrseq-pcie-m2.c: In function 'pwrseq_m2_pcie_create_bt_node':
drivers/power/sequencing/pwrseq-pcie-m2.c:191:9: error: implicit declaration of function 'of_changeset_init' [-Wimplicit-function-declaration]
191 | of_changeset_init(ctx->ocs);
| ^~~~~~~~~~~~~~~~~
Make both dependencies unconditional to prevent compile-testing
in either configuration.
Maciej Strozek [Fri, 3 Apr 2026 08:23:35 +0000 (09:23 +0100)]
ASoC: intel: sof_sdw: Prepare for configuration without a jack
In certain setups of cs42l43 UAJ function may be removed from ACPI and
physically unconnected. Prepare a driver for that configuration by
setting a system clock in the speaker path too.
Documentation: clarify the mandatory and desirable info for security reports
A significant part of the effort of the security team consists in begging
reporters for patch proposals, or asking them to provide them in regular
format, and most of the time they're willing to provide this, they just
didn't know that it would help. So let's add a section detailing the
required and desirable contents in a security report to help reporters
write more actionable reports which do not require round trips.
Documentation: explain how to find maintainers addresses for security reports
These days, 80% of the work done by the security team consists in
locating the affected subsystem in a report, running get_maintainers on
it, forwarding the report to these persons and responding to the reporter
with them in Cc. This is a huge and unneeded overhead that we must try to
lower for a better overall efficiency. This patch adds a complete section
explaining how to figure the list of recipients to send the report to.
Documentation: minor updates to the security contacts
This clarifies the fact that the bug reporters must use a valid
e-mail address to send their report, and that the security team
assists developers working on a fix but doesn't always produce
fixes on its own.
Mingzhe Zou [Fri, 3 Apr 2026 04:21:35 +0000 (12:21 +0800)]
bcache: fix uninitialized closure object
In the previous patch ("bcache: fix cached_dev.sb_bio use-after-free and
crash"), we adopted a simple modification suggestion from AI to fix the
use-after-free.
But in actual testing, we found an extreme case where the device is
stopped before calling bch_write_bdev_super().
At this point, struct closure sb_write has not been initialized yet.
For this patch, we ensure that sb_bio has been completed via
sb_write_mutex.
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Coly Li <colyli@fnnas.com> Link: https://patch.msgid.link/20260403042135.2221247-1-colyli@fnnas.com Fixes: fec114a98b87 ("bcache: fix cached_dev.sb_bio use-after-free and crash") Signed-off-by: Jens Axboe <axboe@kernel.dk>
After analyzing the coredump file, we found that the address of
dc->sb_bio has been freed. We know that cached_dev is only freed when it
is stopped.
Since sb_bio is a part of struct cached_dev, rather than an alloc every
time. If the device is stopped while writing to the superblock, the
released address will be accessed at endio.
This patch hopes to wait for sb_write to complete in cached_dev_free.
It should be noted that we analyzed the cause of the problem, then tell
all details to the QWEN and adopted the modifications it made.
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Fixes: cafe563591446 ("bcache: A block layer cache") Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Coly Li <colyli@fnnas.com> Link: https://patch.msgid.link/20260322134102.480107-1-colyli@fnnas.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace sprintf() with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred for formatting sysfs output because it
provides safer bounds checking.
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:112:23
|
112 | let content = format!("{param}:{content}", param = param, content = content);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
= note: `-W clippy::uninlined-format-args` implied by `-W clippy::all`
= help: to override `-W clippy::all` add `#[allow(clippy::uninlined_format_args)]`
help: change this to
|
112 - let content = format!("{param}:{content}", param = param, content = content);
112 + let content = format!("{param}:{content}");
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:198:14
|
198 | t => panic!("Unsupported parameter type {}", t),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
= note: `-W clippy::uninlined-format-args` implied by `-W clippy::all`
= help: to override `-W clippy::all` add `#[allow(clippy::uninlined_format_args)]`
help: change this to
|
198 - t => panic!("Unsupported parameter type {}", t),
198 + t => panic!("Unsupported parameter type {t}"),
|
The reason it only triggers in that version is that the lint was moved
from `pedantic` to `style` in Rust 1.88.0 and then back to `pedantic`
in Rust 1.89.0 [2][3].
In the first case, the suggestion is fair and a pure simplification, thus
we will clean it up separately.
To keep the behavior the same across all versions, and since the lint
does not work for all macros (e.g. custom ones like `pr_info!`), disable
it globally.
Alice Ryhl [Thu, 2 Apr 2026 10:55:34 +0000 (10:55 +0000)]
rust_binder: override crate name to rust_binder
The Rust Binder object file is called rust_binder_main.o because the
name rust_binder.o is used for the result of linking together
rust_binder_main.o with rust_binderfs.o and a few others.
However, the crate name is supposed to be rust_binder without a _main
suffix. Thus, override the crate name accordingly.
Alice Ryhl [Thu, 2 Apr 2026 10:55:33 +0000 (10:55 +0000)]
rust: support overriding crate_name
Currently you cannot filter out the crate-name argument
RUSTFLAGS_REMOVE_stem.o because the Rust filter-out invocation does not
include that particular argument. Since --crate-name is an argument that
can't be passed multiple times, this means that it's currently not
possible to override the crate name. Thus, remove the --crate-name
argument for drivers. This allows them to override the crate name using
the #![crate_name] annotation.
This affects symbol names, but has no effect on the filenames of object
files and other things generated by the build, as we always use --emit
with a fixed output filename.
The --crate-name argument is kept for the crates under rust/ for
simplicity and to avoid changing many of them by adding #![crate_name].
The rust analyzer script is updated to use rustc to obtain the crate
name of the driver crates, which picks up the right name whether it is
configured via #![crate_name] or not. For readability, the logic to
invoke 'rustc' is extracted to its own function.
Note that the crate name in the python script is not actually that
important - the only place where the name actually affects anything is
in the 'deps' array which specifies an index and name for each
dependency, and determines what that dependency is called in *this*
crate. (The same crate may be called different things in each
dependency.) Since driver crates are leaf crates, this doesn't apply and
the rustc invocation only affects the 'display_name' parameter.
Acked-by: Gary Guo <gary@garyguo.net> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Jesung Yang <y.jems.n@gmail.com> Acked-by: Tamir Duberstein <tamird@kernel.org> Link: https://patch.msgid.link/20260402-binder-crate-name-v4-1-ec3919b87909@google.com
[ Applied Python type hints. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Alice Ryhl [Mon, 23 Feb 2026 10:08:26 +0000 (10:08 +0000)]
tyr: remove impl Send/Sync for TyrData
Now that clk implements Send and Sync, we no longer need to manually
implement these traits for TyrData. Thus remove the implementations.
The comment also mentions the regulator. However, the regulator had the
traits added in commit 9a200cbdb543 ("rust: regulator: implement Send
and Sync for Regulator<T>"), which is already in mainline.
Reviewed-by: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20260223-clk-send-sync-v5-2-181bf2f35652@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Alice Ryhl [Mon, 23 Feb 2026 10:08:25 +0000 (10:08 +0000)]
rust: clk: implement Send and Sync
These traits are required for drivers to embed the Clk type in their own
data structures because driver data structures are usually required to
be Send. Since the Clk type is thread-safe, implement the relevant
traits.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk Link: https://patch.msgid.link/20260223-clk-send-sync-v5-1-181bf2f35652@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Given that the GPIOs are successfully found a bit later during boot and
the code is intentionally returning -EPROBE_DEFER when they are not
found, downgrade these messages to debug prints to avoid unnecessary
warnings being observed.
Note that although the 'cannot find GPIO line' warning has not been
observed in this case, it seems reasonable to make this print a debug
print for consistency too.
Dave Airlie [Fri, 3 Apr 2026 09:05:46 +0000 (19:05 +1000)]
Merge tag 'drm-misc-fixes-2026-04-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A refcounting fix for bridges, revert a previous framebuffer
use-after-free fix that turned out to be causing more problems, a hang
fix for qaic, an initialization fix for ast, a error handling fix for
sysfb, and a speculation fix for drm_compat_ioctl.
Dave Airlie [Fri, 3 Apr 2026 08:56:58 +0000 (18:56 +1000)]
Merge tag 'drm-msm-next-2026-04-02' of https://gitlab.freedesktop.org/drm/msm into drm-next
Changes for v7.1
CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
Core:
- Switched to of_get_available_child_by_name()
DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
DP:
- Removed debug prints looking into PHY internals
DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- Couple a6xx gpu snapshot fixes
- Various other fixes
HDMI:
- Fixed infoframes programming
MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
which does an indirect jump to a location stored in Rx. The
register Rx should have type PTR_TO_INSN. This new type ensures
that the Rx register contains a value (or a range of values)
loaded from a correct jump table – map of type instruction array.
Support indirect jump to all registers in powerpc64 JIT using
the ctr register. Move Rx content to ctr register, then invoke
bctr instruction to branch to address stored in ctr register.
Skip save and restore of TOC as the jump is always within the
program context.
On loading the BPF program, the verifier might adjust/omit some
instructions. The adjusted instruction offset is accounted in the
map containing original instruction -> xlated mapping. This patch
add ppc64 JIT support to additionally build the xlated->jitted
mapping for every instruction present in instruction array. This
change is needed to enable support for indirect jumps, added in a
subsequent patch.
Invoke bpf_prog_update_insn_ptrs() with offset pair of xlated_offset
and jited_offset. The offset mapping is already available, which is
being used for bpf_prog_fill_jited_linfo() and can be directly used
for bpf_prog_update_insn_ptrs() as well.
Additional details present at:
commit b4ce5923e780 ("bpf, x86: add new map type: instructions array")
projects / thirdparty / kernel / linux.git / log
