m68k: defconfig: add config for SnapGear/NETtel board
Add a default configuration for a basic M5307 based NETtel board.
This is primarily to improve defconfig build coverage. This platforms
uses the SMSC ethernet drivers for network ports, and has a few other
minor quirks that make it different from other ColdFire platforms.
Add a default configuration for a basic M54418 based EVB board.
The SoC has been supported for a long time but there is no default
configuration. Create one to improve build and test coverage.
Add a default configuration file for the Freescale M5329EVB board.
Although the SoC type has been supported for a long time there has been
no defconfig for the base platform. Create one to give better build
and test coverage.
m68k: coldfire: select legacy gpiolib interface for mcfqspi
The common coldfire code uses the old GPIO number based interfaces for
at least the QSPI chipselect lines. Select the required Kconfig symbol
to keep it building when that becomes optional.
Apparently there are no devices attached to a QSPI controller in any of
the coldfire boards, so this is not actually used in upstream kernels.
David Gow [Sat, 6 Jun 2026 02:03:15 +0000 (10:03 +0800)]
kunit:tool: Don't write to stdout when it should be disabled
The kunit_parser module accepts a 'printer' object which is used as a
destination for all output. This is typically set to stdout, so that the
parsed results are visible, but can be set to a special 'null_printer' to
implement options where not all results are always printed.
However, there are a few places where use of stdout is hardcoded, notably
in handling crashed tests and in outputting the colour escape sequences.
Properly use the specified printer for all output. This is okay for the
colour handling (as this is already gated behind isatty() anyway), and also
for the crash handling, as cases where printer != stdout are separately
printed afterwards.
David Gow [Sat, 6 Jun 2026 01:38:18 +0000 (09:38 +0800)]
kunit: tool: Add (primitive) support for outputting JUnit XML
This is used by things like Jenkins and other CI systems, which can
pretty-print the test output and potentially provide test-level comparisons
between runs.
The implementation here is pretty basic: it only provides the raw results,
split into tests and test suites, and doesn't provide any overall metadata.
However, CI systems like Jenkins can ingest it and it is already useful.
David Gow [Sat, 6 Jun 2026 01:38:17 +0000 (09:38 +0800)]
kunit: tool: Parse and print the reason tests are skipped
When a KUnit test (or other KTAP test) is skipped, a "skip reason" can be
provided. kunit.py has never done anything with this, ignoring anything
included in the KTAP output after the 'SKIP' directive.
Since we have it, and it's used, print it in a nice friendly yellow in
parentheses after a skipped test's name.
(And, by parsing it, it can be included in the JUnit results as well.)
This series fixes AA-deadlocks where NMI and tracepoint BPF programs
re-enter the per-CPU or global LRU lock already held on the same CPU
(syzbot c69a0a2c816716f1e0d5, 18b26edb69b2e19f3b33).
Patch 1 converts every LRU lock site to rqspinlock_t
and adds explicit recovery for some failures so no node leaks.
Patch 2 refreshes Documentation/bpf/map_lru_hash_update.dot to show
the new rqspinlock failure exits and recovery routes.
Patch 3 introduces a stress test.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
---
Changes in v3:
- Removed RFC tag
- Link to v2: https://patch.msgid.link/20260603-lru_map_spin-v2-0-7060cfb6cdac@meta.com
Changes in v2:
- Patch 1: __bpf_lru_node_move_in() now clears pending_free only when
moving to the FREE list.
- Patch 3: address sashiko's feedback.
- Link to v1: https://patch.msgid.link/20260528-lru_map_spin-v1-0-4f52223170cf@meta.com
====================
Introduces stress test for bpf_lru_list that exercises
lock-failures and orphan-recovery, added by the LRU rqspinlock
conversion.
Runs three subtests: common LRU, per-CPU LRU lists (BPF_F_NO_COMMON_LRU),
and per-CPU LRU map. Each pins one userspace hammer per CPU and attaches
the perf_event NMI BPF prog (update+delete mix) on every online CPU.
Pre-fix, lockdep fires the "INITIAL USE -> IN-NMI" splat during stress.
After stress test, drain_then_verify_capacity() drains every key
and refills the lru map.
A stranded node on any CPU's pool would have forced eviction of
a just-inserted key on that CPU, surfacing here as a missing lookup.
Marked serial_ because per-CPU pinning and high-rate HW perf events
would perturb parallel tests.
Mykyta Yatsenko [Sun, 7 Jun 2026 20:30:42 +0000 (13:30 -0700)]
Documentation/bpf: Refresh map_lru_hash_update.dot for rqspinlock
Reflect the rqspinlock conversion and orphan-recovery paths added in
the previous commit:
- All LRU locks are rqspinlock_t; any acquire can fail (AA or
timeout). A shared "rqspinlock acquire failed" terminal collapses
to the existing -ENOMEM exit. Dashed arrows from each acquire site
mark the failure paths.
- The per-CPU local freelist is now lockless (free_llist).
- Post-steal: re-acquiring loc_l->lock to insert the stolen node
into the local pending list can fail; on failure the node is
published to free_llist instead of being orphaned, and the call
returns -ENOMEM.
- Steal-loop victim lock failure is silent: skip the victim and try
the next CPU.
Mykyta Yatsenko [Sun, 7 Jun 2026 20:30:41 +0000 (13:30 -0700)]
bpf: Fix NMI/tracepoint re-entry deadlock on lru locks
NMI and tracepoint BPF programs can re-enter the per-CPU or global
LRU lock that bpf_lru_pop_free()/push_free() already hold on the
same CPU, AA-deadlocking. Lockdep reports "inconsistent
{INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5)
and "possible recursive locking detected" on &loc_l->lock (syzbot 18b26edb69b2e19f3b33).
Prior trylock and rqspinlock based fixes (see links) were nacked
because compromised on reliability.
This patch converts every LRU lock site to rqspinlock_t and adds a
recovery path for some failure windows to avoid node leaks.
Failure recovery:
- *_pop_free top-level: return NULL; prealloc_lru_pop() already
treats that as no-free-element (-ENOMEM).
- Cross-CPU steal: skip the victim's locked loc_l, try next CPU.
- Post-steal local lock fail: publish stolen node to lockless
per-CPU free_llist; next pop on this CPU picks it up.
- push_free fail: mark node pending_free=1. __local_list_flush(),
__local_list_pop_pending() reclaim the node from pending_list.
__bpf_lru_list_shrink_inactive() reclaims the node from inactive
list. Nodes from active list are reclaimed by __bpf_lru_list_shrink()
or after __bpf_lru_list_rotate_active() demotes it to the inactive.
Now that the Rust KUnit tests are protected with Kconfig, update the
documentation to mention it.
Signed-off-by: Yury Norov <ynorov@nvidia.com> Reviewed-by: David Gow <david@davidgow.net> Acked-by: Gary Guo <gary@garyguo.net> Link: https://patch.msgid.link/20260417031531.315281-4-ynorov@nvidia.com
[ Fixed the paragraph by moving the new sentence above. Added gate
in the other example as well. Applied proper formatting. Reworded
slightly. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There are 6 individual Rust KUnit test suites (plus the doctests one). All
the tests are compiled unconditionally now, which adds ~200 kB to the
kernel image for me on x86_64. As Rust matures, this bloating will
inevitably grow.
Add Kconfig.test which includes a RUST_KUNIT_TESTS menu, and all
individual tests under it.
As usual, new tests are all enabled if KUNIT_ALL_TESTS=y.
Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Yury Norov <ynorov@nvidia.com> Reviewed-by: David Gow <david@davidgow.net> Acked-by: Gary Guo <gary@garyguo.net> Link: https://patch.msgid.link/20260417031531.315281-3-ynorov@nvidia.com
[ Fixed capitalization. Used singular for "API" for consistency.
Reworded to clarify these are suites and that there exists
the doctests one (which is the biggest at the moment by
far). - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust: tests: drop 'use crate' in bitmap and atomic KUnit tests
The following patch makes usage of macros::kunit_tests crate conditional
on the corresponding configs. When the configs are disabled, compiler
warns on unused crate. So, embed it in unit test declaration.
The wakeup condition if a min timeout is present and has expired is that
at least _one_ CQE was posted. Thus set the cq_tail target to
->cq_min_tail + 1. Without this commit a spurious wakeup can result in a
premature wakeup because io_should_wake() will return true even if _no_
CQE was posted at all.
Cc: Tip ten Brink <tip@tenbrinkmeijs.com> Fixes: e15cb2200b93 ("io_uring: fix min_wait wakeups for SQPOLL") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Link: https://patch.msgid.link/20260606201120.1441447-1-lk@c--e.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Sun, 7 Jun 2026 22:05:47 +0000 (16:05 -0600)]
io_uring/kbuf: don't truncate end buffer for bundles
If buffers have been peeked for a bundle receive, the kernel will
truncate the end buffer, if the available length is shorter than the
buffer itself. This is unnecessary, as applications iterating bundle
receives must always use the minimum size of the buffer length and the
remaining number of bytes in the bundle. The examples in liburing do
that as well, eg examples/proxy.c.
If the kernel does truncate this buffer AND the current transfer fails,
then the buffer will be left with a smaller size than what is otherwise
available.
Just remove the buffer truncation, as it's not necessary in the first
place.
Linus Torvalds [Sun, 7 Jun 2026 20:12:29 +0000 (13:12 -0700)]
Merge tag 'x86-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Add more AMD Zen6 models (Pratik Vishwakarma)
- Avoid confusing bootup message by the Intel resctl enumeration
code when running on certain AMD systems (Tony Luck)
* tag 'x86-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Only check Intel systems for SNC
x86/CPU/AMD: Add more Zen6 models
Linus Torvalds [Sun, 7 Jun 2026 20:02:02 +0000 (13:02 -0700)]
Merge tag 'timers-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Fix the arch_inlined_clockevent_set_next_coupled() prototype in the
!CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST case (Naveen Kumar Chaudhary)
- Fix an off-by-1 bug in the sys_settimeofday() usecs validation code
(Naveen Kumar Chaudhary)
- Mark vdso_k_*_data pointers as __ro_after_init (Thomas Weißschuh)
- Fix livelock race in tmigr_handle_remote_up() (Amit Matityahu)
* tag 'timers-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix livelock in tmigr_handle_remote_up()
vdso/datastore: Mark vdso_k_*_data pointers as __ro_after_init
time: Fix off-by-one in settimeofday() usec validation
clockevents: Fix duplicate type specifier in stub function parameter
Linus Torvalds [Sun, 7 Jun 2026 19:54:37 +0000 (12:54 -0700)]
Merge tag 'sched-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fix from Ingo Molnar:
- Fix uninitialized stack variable in rseq_exit_user_update() (Qing
Wang)
* tag 'sched-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix using an uninitialized stack variable in rseq_exit_user_update()
Linus Torvalds [Sun, 7 Jun 2026 19:43:21 +0000 (12:43 -0700)]
Merge tag 'locking-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix a NULL pointer dereference bug in the FUTEX_CMP_REQUEUE_PI
code (Ji'an Zhou)
- Fix a NULL pointer dereference bug in the rtmutex code (Davidlohr
Bueso)
* tag 'locking-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock
v8 changes:
- add back the btf_is_union check to btf_get_type_size [sashiko]
v7 changes:
- added ftrace_hash_count stub for !CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS cade [sashiko]
- selftests fixes [sashiko]
- use hash_ptr in select_trampoline_lock [sashiko]
- changed the check duplicate logic in check_dup_ids [sashiko]
- use sort_r_nonatomic in check_dup_ids [sashiko]
- added BPF_TRACE_FSESSION_MULTI to can_be_sleepable,
plus added testcase for sleepable fsession
- make bpf_tracing_multi_opts pointer fields as const
- add ___migrate_enable to trace_blacklist
v6 changes:
- move ftrace_hash_count declaration under CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS [sashiko]
- fix ftrace_hash_remove check/deref [sashiko]
- disable context access for multi programs by using stub function with no arguments
for verification [sashiko]
- add __used for bpf_multi_func, and removed arguments, we do not allow direct access [sashiko]
- rebased on latest loongarch changes, fix ppc build
- guard update_ftrace_direct_del with ftrace_hash_count on rollback [sashiko]
- fix noreturn attachment condition in bpf_check_attach_btf_id_multi [sashiko]
- fail early on multiple same IDs provided by user [sashiko]
- fix selftests error paths [sashiko]
- add MAX_RESOLVE_DEPTH check to btf_get_type_size [sashiko]
- use btf__pointer_size [sashiko]
- fixed compilation on powerpc [sashiko]
- added verifier fails selftest
- after discussing with Song, it was determined that cleaning up FTRACE_OPS_CMD_DISABLE_SHARE_IPMODIFY_PEER
is not strictly necessary — keeping the trampoline in the ipmodify_enabled state is acceptable.
The race condition this introduces remains unlikely, so the concern raised in [1] will not be
addressed at this time.
[1] https://lore.kernel.org/bpf/aec7bAbGlnEo3R1g@krava/
v5 changes:
- add dedicated hashes used for detach, so there's no need to allocate
them on detach [sashiko]
- safely release old trampoline images [sashiko]
- add cond_resched() to couple of loops [sashiko]
- validate attr->link_create.target_fd [sashiko]
- allow only bpf_get_func_ret() for return value retrieval [sashiko]
- do not allow attachment of fexit/fsession_multi for noreturn functions [sashiko]
- fixed double free/close in libbpf btf cleanup, in separate patch [sashiko]
- make btf_type_is_traceable_func closer to btf_distill_func_proto [sashiko]
- add prog->attach_btf_obj_fd check to collect_func_ids_by_glob,
to check we don't load module programs for kernel [sashiko]
- make sure program is loaded in bpf_program__attach_tracing_multi [sashiko]
- several selftests fixes [sashiko]
- add attach_type to fdinfo output [Leon Hwang]
- selftests cleanup fixes [Leon Hwang]
v4 changes:
- unlink rollback fix (added ftrace_hash_count) [bot]
- use const for some bpf_link_create_opts tracing_multi members [bot]
- adding missing comment for lockdep keys [bot]
- selftest error path fixes (leaks) and other assorted test fixes [Leon Hwang]
- several compile fixes wrt CONFIG_BPF_SYSCALL and CONFIG_BPF_JIT [kernel test robot]
- make ftrace_hash_clear global, because it's needed in rollback
v3 changes:
- fix module parsing [Leon Hwang]
- use function traceable check from libbpf [Leon Hwang]
- use ptr_to_u64 and fix/updated few comments [ci]
- display cookies as decimal numbers [ci]
- added link_create.flags check [ci]
- fix error path in bpf_trampoline_multi_detach [ci]
- make fentry/fexit.multi not extendable [ci]
- add missing OPTS_VALID to bpf_program__attach_tracing_multi [ci]
v2 changes:
- allocate data.unreg in bpf_trampoline_multi_attach for rollback path [ci]
and fixed link count setup in rollback path [ci]
- several small assorted fixes [ci]
- added loongarch and powerpc changes for struct bpf_tramp_node change
- added support to attach functions from modules
- added tests for sleepable programs
- added rollback tests
v1 changes:
- added ftrace_hash_count as wrapper for hash_count [Steven]
- added trampoline mutex pool [Andrii]
- reworked 'struct bpf_tramp_node' separatoin [Andrii]
- the 'struct bpf_tramp_node' now holds pointer to bpf_link,
which is similar to what we do for uprobe_multi;
I understand it's not a fundamental change compared to previous
version which used bpf_prog pointer instead, but I don't see better
way of doing this.. I'm happy to discuss this further if there's
better idea
- reworked 'struct bpf_fsession_link' based on bpf_tramp_node
- made btf__find_by_glob_kind function internal helper [Andrii]
- many small assorted fixes [Andrii,CI]
- added session support [Leon Hwang]
- added cookies support
- added more tests
Note I plan to send linkinfo support separately, the patchset is big enough.
Jiri Olsa [Sat, 6 Jun 2026 12:39:54 +0000 (14:39 +0200)]
selftests/bpf: Add tracing multi attach rollback tests
Adding tests for the rollback code when the tracing_multi
link won't get attached, covering 2 reasons:
- wrong btf id passed by user, where all previously allocated
trampolines will be released
- trampoline for requested function is fully attached (has already
maximum programs attached) and the link fails, the rollback code
needs to release all previously link-ed trampolines and release
them
We need the bpf_fentry_test* unattached for the tests to pass,
so the rollback tests are serial.
Jiri Olsa [Sat, 6 Jun 2026 12:39:47 +0000 (14:39 +0200)]
selftests/bpf: Add tracing multi skel/pattern/ids module attach tests
Adding tests for tracing_multi link attachment via all possible
libbpf apis - skeleton, function pattern and btf ids on top of
bpf_testmod kernel module.
User can specify functions to attach with 'pattern' argument that
allows wildcards (*?' supported) or provide BTF ids of functions
in array directly via opts argument. These options are mutually
exclusive.
When using BTF ids, user can also provide cookie value for each
provided id/function, that can be retrieved later in bpf program
with bpf_get_attach_cookie helper. Each cookie value is paired with
provided BTF id with the same array index.
Adding support to auto attach programs with following sections:
The provided <pattern> is used as 'pattern' argument in
bpf_program__attach_kprobe_multi_opts function.
The <pattern> allows to specify optional kernel module name with
following syntax:
<module>:<function_pattern>
In order to attach tracing_multi link to a module functions:
- program must be loaded with 'module' btf fd
(in attr::attach_btf_obj_fd)
- bpf_program__attach_tracing_multi must either have
pattern with module spec or BTF ids from the module
Jiri Olsa [Sat, 6 Jun 2026 12:39:44 +0000 (14:39 +0200)]
libbpf: Add btf_type_is_traceable_func function
Adding btf_type_is_traceable_func function to perform same checks
as the kernel's btf_distill_func_proto function to prevent attachment
on some of the functions.
Exporting the function via libbpf_internal.h because it will be used
by benchmark test in following changes.
Adding bpf_trampoline_multi_attach/detach functions that allows to
attach/detach tracing program to multiple functions/trampolines.
The attachment is defined with bpf_program and array of BTF ids of
functions to attach the bpf program to.
Adding bpf_tracing_multi_link object that holds all the attached
trampolines and is initialized in attach and used in detach.
The attachment allocates or uses currently existing trampoline
for each function to attach and links it with the bpf program.
The attach works as follows:
- we get all the needed trampolines
- lock them and add the bpf program to each (__bpf_trampoline_link_prog)
- the trampoline_multi_ops passed in __bpf_trampoline_link_prog gathers
ftrace_hash (ip -> trampoline) objects
- we call update_ftrace_direct_add/mod to update needed locations
- we unlock all the trampolines
The detach works as follows:
- we lock all the needed trampolines
- remove the program from each (__bpf_trampoline_unlink_prog)
- the trampoline_multi_ops passed in __bpf_trampoline_unlink_prog gathers
ftrace_hash (ip -> trampoline) objects
- we call update_ftrace_direct_del/mod to update needed locations
- we unlock and put all the trampolines
We store the old image/flags in the trampoline before the update
and use it in case we need to rollback the attachment.
We keep the ftrace_hash objects allocated during attach in the link
so they can be used for detach as well.
Adding trampoline_(un)lock_all functions to (un)lock all trampolines
to gate the tracing_multi attachment.
Note this is supported only for archs (x86_64) with ftrace direct and
have single ops support.
Jiri Olsa [Sat, 6 Jun 2026 12:39:36 +0000 (14:39 +0200)]
bpf: Move sleepable verification code to btf_id_allow_sleepable
Move sleepable verification code to btf_id_allow_sleepable function.
It will be used in following changes.
Adding code to retrieve type's name instead of passing it from
bpf_check_attach_target function, because this function will be
called from another place in following changes and it's easier
to retrieve the name directly in here.
Jiri Olsa [Sat, 6 Jun 2026 12:39:35 +0000 (14:39 +0200)]
bpf: Add multi tracing attach types
Adding new program attach types multi tracing attachment:
BPF_TRACE_FENTRY_MULTI
BPF_TRACE_FEXIT_MULTI
and their base support in verifier code.
Programs with such attach type will use specific link attachment
interface coming in following changes.
This was suggested by Andrii some (long) time ago and turned out
to be easier than having special program flag for that.
Bpf programs with such types have 'bpf_multi_func' function set as
their attach_btf_id and keep module reference when it's specified
by attach_prog_fd.
They are also accepted as sleepable programs during verification,
and the real validation for specific BTF_IDs/functions will happen
during the multi link attachment in following changes.
Jiri Olsa [Sat, 6 Jun 2026 12:39:34 +0000 (14:39 +0200)]
bpf: Factor fsession link to use struct bpf_tramp_node
Now that we split trampoline attachment object (bpf_tramp_node) from
the link object (bpf_tramp_link) we can use bpf_tramp_node as fsession's
fexit attachment object and get rid of the bpf_fsession_link object.
The link holds the bpf_prog pointer and forces one link - one program
binding logic. In following changes we want to attach program to multiple
trampolines but we want to keep just one bpf_link object.
The 'struct bpf_tramp_link' defines standard single trampoline link
and 'struct bpf_tramp_node' is the attachment trampoline object with
pointer to the bpf_link object.
This will allow us to define link for multiple trampolines, like:
Jiri Olsa [Sat, 6 Jun 2026 12:39:32 +0000 (14:39 +0200)]
bpf: Add bpf_trampoline_add/remove_prog functions
Separate bpf_trampoline_add/remove_prog functions from
__bpf_trampoline_link/unlink functions to be able to add/remove
trampoline programs without the image being updated in following
changes. No functional change is intended.
Jiri Olsa [Sat, 6 Jun 2026 12:39:31 +0000 (14:39 +0200)]
bpf: Move trampoline image setup into bpf_trampoline_ops callbacks
Moving trampoline image setup into bpf_trampoline_ops callbacks,
so we can have different image handling for multi attachment which
is coming in following changes.
Jiri Olsa [Sat, 6 Jun 2026 12:39:30 +0000 (14:39 +0200)]
bpf: Add struct bpf_trampoline_ops object
In following changes we will need to override ftrace direct attachment
behaviour. In order to do that we are adding struct bpf_trampoline_ops
object that defines callbacks for ftrace direct attachment:
register_fentry
unregister_fentry
modify_fentry
The new struct bpf_trampoline_ops object is passed as an argument to
__bpf_trampoline_link/unlink_prog functions.
At the moment the default trampoline_ops is set to the current ftrace
direct attachment functions, so there's no functional change for the
current code.
Jiri Olsa [Sat, 6 Jun 2026 12:39:29 +0000 (14:39 +0200)]
bpf: Use mutex lock pool for bpf trampolines
Adding mutex lock pool that replaces bpf trampolines mutex.
For tracing_multi link coming in following changes we need to lock all
the involved trampolines during the attachment. This could mean thousands
of mutex locks, which is not convenient.
As suggested by Andrii we can replace bpf trampolines mutex with mutex
pool, where each trampoline is hash-ed to one of the locks from the pool.
It's better to lock all the pool mutexes (32 at the moment) than
thousands of them.
There is 48 (MAX_LOCK_DEPTH) lock limit allowed to be simultaneously
held by task, so we need to keep 32 mutexes (5 bits) in the pool, so
when we lock them all in following changes the lockdep won't scream.
Removing the mutex_is_locked in bpf_trampoline_put, because we removed
the mutex from bpf_trampoline.
Abdun Nihaal [Thu, 14 May 2026 08:24:42 +0000 (13:54 +0530)]
fbdev: vesafb: fix memory leak in vesafb_probe()
Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller. But the string is not freed in
vesafb_probe(). Fix that by freeing the option string after setup.
Fixes: 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
Abdun Nihaal [Thu, 14 May 2026 08:24:41 +0000 (13:54 +0530)]
fbdev: efifb: fix memory leak in efifb_probe()
Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller, but the string is not freed in
efifb_probe(). Fix that by freeing the option string after setup.
Fixes: 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
Abdun Nihaal [Thu, 14 May 2026 08:24:40 +0000 (13:54 +0530)]
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label.
Abdun Nihaal [Thu, 14 May 2026 08:24:39 +0000 (13:54 +0530)]
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist().
Abdun Nihaal [Thu, 14 May 2026 08:24:38 +0000 (13:54 +0530)]
fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe()
In tdfxfb_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not
freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist().
Fixes: 215059d2421f ("tdfxfb: make use of DDC information about connected monitor") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Signed-off-by: Helge Deller <deller@gmx.de>
Abdun Nihaal [Thu, 14 May 2026 08:24:37 +0000 (13:54 +0530)]
fbdev: s3fb: fix potential memory leak in s3_pci_probe()
In s3_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist()
Abdun Nihaal [Thu, 14 May 2026 08:24:36 +0000 (13:54 +0530)]
fbdev: nvidia: fix potential memory leak in nvidiafb_probe()
In nvidiafb_probe(), the memory allocated for modelist in
nvidia_set_fbinfo() is not freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist().
Abdun Nihaal [Thu, 14 May 2026 08:24:35 +0000 (13:54 +0530)]
fbdev: i740fb: fix potential memory leak in i740fb_probe()
In i740fb_probe(), the memory allocated in fb_videomode_to_modelist()
for modelist is not freed in the error paths. Fix that by calling
fb_destroy_modelist().
Abdun Nihaal [Thu, 14 May 2026 08:24:33 +0000 (13:54 +0530)]
fbdev: radeon: fix potential memory leak in radeonfb_pci_register()
The function radeonfb_pci_register() allocates memory for modelist
(by calling radeon_check_modes() which calls fb_add_videomode()).
The memory is appended to info->modelist, but is not freed in subsequent
error paths. Fix this by calling fb_destroy_modelist().
Rosen Penev [Mon, 18 May 2026 21:13:03 +0000 (14:13 -0700)]
fbdev: imxfb: Use of_device_get_match_data()
Use of_device_get_match_data() to fetch the platform ID entry directly
instead of open-coding an of_match_device() lookup. No NULL check is
needed as every compatible string has a corresponding data section.
This also lets the driver drop the of_device.h include.
Jiacheng Yu [Thu, 14 May 2026 09:19:18 +0000 (17:19 +0800)]
fbcon: Use correct type for vc_resize() return value
The return value of vc_resize() is int, but fbcon_set_disp() stores it
in an unsigned long variable. While the !ret check happens to work
correctly by coincidence (negative values become large positive values),
the types should match. Use int instead.
Eliminates the following W=3 warning:
drivers/video/fbdev/core/fbcon.c: In function 'fbcon_set_disp':
drivers/video/fbdev/core/fbcon.c:1494:14: warning: implicit conversion from 'int' to 'unsigned long' [-Wconversion]
fbdev: Consistently define pci_device_ids using named initializers
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by list
expressions. This isn't easily readable if you're not into PCI. Using
named initializers is more explicit and thus easier to parse. Also use
PCI_DEVICE* helper macros to assign .vendor, .device, .subvendor and
.subdevice where appropriate and skip explicit assignments of 0 (which
the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
While touching all these arrays, unify usage of whitespace and comma
in a few drivers.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Uwe Kleine-König [Mon, 18 May 2026 16:08:08 +0000 (18:08 +0200)]
fbdev: matroxfb/ssd1307fb: Use named initializers for struct i2c_device_id
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Wei-Lin Chang [Fri, 5 Jun 2026 18:52:55 +0000 (19:52 +0100)]
KVM: arm64: Fix block mapping validity check in stage-1 walker
For the 64K granule size, FEAT_LPA determines whether a level 1 mapping
is allowed. Using the result of has_52bit_pa() is too restrictive, as it
also checks the selected output addressi size in TCR.(I)PS. Fix it by
only checking FEAT_LPA.
KVM: arm64: Set a Linux errno on SMCCC error in kvm_call_hyp_nvhe()
If kvm_call_hyp_nvhe() fails with an SMCCC error code, we WARN().
However, the returned value isn't initialized and the caller might get
garbage or 0 which is likely to be interpreted as success.
Set a default -EOPNOTSUPP error value, ensuring all callers get the
message when hypercalls fail.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Fuad Tabba <tabba@google.com> Link: https://patch.msgid.link/20260603110312.2909844-1-vdonnefort@google.com
[maz: changed error value to -EOPNOTSUPP as suggested by Will,
tidied up change log] Signed-off-by: Marc Zyngier <maz@kernel.org>
tabba@google.com [Fri, 29 May 2026 12:17:55 +0000 (13:17 +0100)]
KVM: arm64: Roll back partial shares on kvm_share_hyp() failure
kvm_share_hyp() shares a range one page at a time. If share_pfn_hyp()
fails partway through, the pages already shared by this call are left
shared, while the caller treats the whole range as failed and never
unshares them.
Unshare those pages before returning the error. If an unshare itself
fails the page is leaked: it stays shared with the hypervisor and is
no longer reusable for pKVM, but no isolation guarantee is broken, so
WARN and continue. Not expected in practice.
Fixes: a83e2191b7f1 ("KVM: arm64: pkvm: Refcount the pages shared with EL2") Suggested-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Vincent Donnefort <vdonnefort@google.com> Link: https://patch.msgid.link/20260529121755.2923500-4-tabba@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
tabba@google.com [Fri, 29 May 2026 12:17:54 +0000 (13:17 +0100)]
KVM: arm64: Avoid host/hyp share desync on unshare hypercall failure
unshare_pfn_hyp() erases the tracking node from hyp_shared_pfns
and frees it before invoking __pkvm_host_unshare_hyp. If the
hypercall fails (e.g. EL2 refcount still held, or page-state
mismatch), the host loses its record while EL2 still holds the
share, breaking later share/unshare attempts on the same pfn.
Invoke the hypercall first; erase and free only on success.
Document at the kvm_unshare_hyp() call site that the WARN_ON() is
left non-fatal: a failed unshare leaks the page (it stays shared
with the hypervisor) but breaks no isolation guarantee.
Fixes: 52b28657ebd7 ("KVM: arm64: pkvm: Unshare guest structs during teardown") Reported-by: Sashiko (local):gemini-3.1-pro Suggested-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Vincent Donnefort <vdonnefort@google.com> Link: https://patch.msgid.link/20260529121755.2923500-3-tabba@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
tabba@google.com [Fri, 29 May 2026 12:17:53 +0000 (13:17 +0100)]
KVM: arm64: Free hyp-share tracking node when share hypercall fails
share_pfn_hyp() inserts a tracking node into hyp_shared_pfns and
then invokes __pkvm_host_share_hyp. If the hypercall rejects the
share (page-state mismatch at EL2), the node stays in the tree
with refcount 1: a phantom share that leaks the allocation and
that a later unshare will trust.
Erase the node and free it on hypercall failure.
Fixes: a83e2191b7f1 ("KVM: arm64: pkvm: Refcount the pages shared with EL2") Reported-by: Sashiko (local):gemini-3.1-pro Suggested-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Vincent Donnefort <vdonnefort@google.com> Link: https://patch.msgid.link/20260529121755.2923500-2-tabba@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
tabba@google.com [Sun, 31 May 2026 15:45:48 +0000 (16:45 +0100)]
KVM: arm64: Flush HCR_EL2.VSE to deliver SErrors to pKVM guests
With pKVM enabled, the host injects a virtual SError by setting
HCR_EL2.VSE on its vCPU copy, but flush_hyp_vcpu() only flows TWI/TWE
into the hyp vCPU that runs, so VSE never reaches it and a deferred
(masked) SError is never delivered. VSE is a host-owned injection
control, not a trap-configuration bit, so restricting the host's
trap-register values should not have dropped it.
Flow it on entry; sync_hyp_vcpu() already copies hcr_el2 back, so
delivery is reflected to the host. THis makes it consistent with
the existing forwarding of VSESR_EL2, which qualifies the Serror.
Fixes: b56680de9c648 ("KVM: arm64: Initialize trap register values in hyp in pKVM") Reported-by: Sashiko (local):gemini-3.1-pro Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Oliver Upton <oupton@kernel.org> Link: https://patch.msgid.link/20260531154548.1505799-1-tabba@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
Hyunwoo Kim [Sat, 6 Jun 2026 17:56:11 +0000 (02:56 +0900)]
KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU
on every run. The vGIC list register save and restore use used_lrs as
their loop bound and expect it to stay within the number of implemented
list registers. While this is generally the case, flush_hyp_vcpu()
copies vgic_v3 verbatim and does not enforce this, so a value provided
by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2
(host -> EL2).
Fix by clamping used_lrs to the number of implemented list registers
after the copy, as the trusted path already does in
vgic_flush_lr_state(). The number of implemented list registers is
constant after init, so it is replicated once from
kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on
every entry.
Cc: stable@vger.kernel.org Fixes: be66e67f1750 ("KVM: arm64: Use the pKVM hyp vCPU structure in handle___kvm_vcpu_run()") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Link: https://patch.msgid.link/20260606175614.83273-3-imv4bel@gmail.com Signed-off-by: Marc Zyngier <maz@kernel.org>
Hyunwoo Kim [Sat, 6 Jun 2026 17:56:10 +0000 (02:56 +0900)]
KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vCPU context into the hyp's private
vCPU on every run. ctxt_to_vcpu() expects a guest context to have a
NULL __hyp_running_vcpu, which is only ever set on the host context, so
that it resolves the vCPU via container_of(). While this is generally
the case, flush_hyp_vcpu() copies the context verbatim and does not
enforce this, so a value provided by the host is dereferenced at EL2
(host -> EL2).
Fix by clearing __hyp_running_vcpu after the copy.
Cc: stable@vger.kernel.org Fixes: be66e67f1750 ("KVM: arm64: Use the pKVM hyp vCPU structure in handle___kvm_vcpu_run()") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Link: https://patch.msgid.link/20260606175614.83273-2-imv4bel@gmail.com Signed-off-by: Marc Zyngier <maz@kernel.org>
Han Gao [Tue, 19 May 2026 16:55:46 +0000 (00:55 +0800)]
riscv: also select ARCH_KEEP_MEMBLOCK if kexec is selected
On RISC-V, also select ARCH_KEEP_MEMBLOCK if kexec is selected, not
only if ACPI is selected. This is because kexec requires the memblock
areas to be kept after boot to initialize the secondary kernel. This
is needed for both Device Tree and ACPI platforms.
Signed-off-by: Han Gao <gaohan@iscas.ac.cn> Link: https://patch.msgid.link/20260519165546.123105-1-gaohan@iscas.ac.cn
[pjw@kernel.org: change to add the dependency on kexec, rather than making it unconditional;
rewrite the patch description accordingly] Signed-off-by: Paul Walmsley <pjw@kernel.org>
Shay Drory [Fri, 29 May 2026 05:23:59 +0000 (08:23 +0300)]
net/mlx5: Add sd_group_size bits for SD management
Currently, mlx5 is querying the MPIR register to get the number of PFs
that should comprise the SD group.
However, this register does not reflect the correct number in complex
deployments. Hence, add an sd_group_size field to nic_vport_context to
determine the correct number of PFs, and add an sd_group_size capability
bit to indicate whether FW supports it.
Dragos Tatulea [Fri, 29 May 2026 05:23:58 +0000 (08:23 +0300)]
net/mlx5: Update IFC allowed_list_size field bits
The vport context allowed_list_size was increased from 12 to 16 bits.
Writing to this field is protected by the log_max_current_uc/mc_list
capabilities. On older FW versions these capabilities are limited
to < 2K and only the high bits of the field are extended. This means
that the change is backward compatible with older FW versions.
Ruoyu Wang [Sun, 7 Jun 2026 07:42:19 +0000 (15:42 +0800)]
ALSA: es18xx: check control allocation before private data setup
snd_es18xx_mixer() creates controls with snd_ctl_new1() and then stores
bookkeeping pointers or sets private_free before calling snd_ctl_add().
snd_ctl_new1() can return NULL on allocation failure, so those writes
can dereference a NULL control pointer.
Check the returned control pointers before using them and return -ENOMEM
on allocation failure.
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
The CONFIG_FILE_LOCKING=n stub for break_lease() takes a 'bool wait'
argument, whereas the CONFIG_FILE_LOCKING=y version and every caller pass
an openmode as an 'unsigned int mode'. The mismatch was introduced when
__break_lease() was reworked to use flags: only the stub was switched to
'bool wait', a stray leftover from the neighbouring break_layout()
helper. The real prototype kept 'unsigned int mode'.
This was harmless until O_WRONLY changed from the octal literal 00000001
to (1 << 0). clang's -Wtautological-constant-compare then fires on the
implicit shift-to-bool conversion at the first FILE_LOCKING=n caller:
fs/open.c:112:29: warning: converting the result of '<<' to a boolean
always evaluates to true [-Wtautological-constant-compare]
112 | error = break_lease(inode, O_WRONLY);
Restore the stub's parameter to 'unsigned int mode' so it matches the
real prototype and every caller. The stub still just returns 0, so there
is no functional change; it removes the type inconsistency and silences
the warning.
Root cause diagnosed by Nathan Chancellor.
Fixes: 4be9f3cc582a ("filelock: rework the __break_lease API to use flags") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202606071029.DKCs8WOs-lkp@intel.com/ Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Rosen Penev [Mon, 25 May 2026 21:58:40 +0000 (14:58 -0700)]
netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()
The timestamp-only fast path dereferences the option stream as
*(__be32 *)ptr, which assumes 4-byte alignment that the TCP option
stream does not guarantee. Use get_unaligned_be32() instead, which
reads the value safely and already returns host byte order, so the
htonl() on the comparison constant can be dropped.
This matches the existing get_unaligned_be32() use later in the same
function.
Assisted-by: Claude:Opus-4.7 Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David Carlier [Sat, 23 May 2026 15:26:21 +0000 (16:26 +0100)]
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps
inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the
decrement still happens and wraps it to 255. The break only leaves
the inner switch -- a later path entry can set info->indev back to
a real device, and we end up returning with num_encaps == 255.
nft_dev_forward_path() then walks info.encap[] (size 2) up to
num_encaps, which means an OOB stack read and a bogus count copied
into the route descriptor.
Should only happen on a malformed bridge path stack, hence the WARN,
but worth handling sanely. Move the decrement out of the WARN.
[ While at this, remove the WARN_ON_ONCE since this can only happen
with a buggy bridge path stack --pablo ].
Fixes: e990cef6516d ("netfilter: flowtable: add bridge vlan filtering support") Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David Windsor [Fri, 5 Jun 2026 14:57:07 +0000 (10:57 -0400)]
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly.
Fixes: 69fd337a975c ("bpf: per-cgroup lsm flavor") Signed-off-by: David Windsor <dwindsor@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20260605145707.608579-1-dwindsor@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
riscv: alternative: Pass vDSO start as parameter to apply_vdso_alternatives()
The dedicated vDSO with CFI should also be patched in the same way.
To prepare for that move the currently hardcoded vDSO start symbol
into a parameter.
Make the declarations of vdso_start and its related symbols always
visible. With that their users don't have to use ifdeffery but can
use the better IS_ENABLED() compile-time checks.
Kyle Zeng [Sun, 7 Jun 2026 00:41:29 +0000 (17:41 -0700)]
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain.
Takashi Iwai [Sat, 6 Jun 2026 16:11:41 +0000 (18:11 +0200)]
ALSA: timer: Fix UAF at snd_timer_user_params()
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter.
Takashi Iwai [Sat, 6 Jun 2026 16:11:40 +0000 (18:11 +0200)]
ALSA: timer: Forcibly close timer instances at closing
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too.
projects / thirdparty / kernel / linux.git / log
