Tejas Upadhyay [Fri, 8 May 2026 06:55:45 +0000 (12:25 +0530)]
drm/buddy: Integrate lockdep annotations for gpu buddy manager
gpu_buddy APIs are expected to be called with the driver-provided lock
held, but there is no runtime enforcement of this contract. Add lockdep
annotations to catch locking violations early.
Introduce gpu_buddy_driver_set_lock() for the driver to register the
lock that protects the buddy manager. Add gpu_buddy_driver_lock_held()
assertions to all exported gpu_buddy and drm_buddy APIs that
access/modify the manager state. The lock_dep_map field is only compiled
in when CONFIG_LOCKDEP is enabled, adding zero overhead to production
builds.
Wire up xe_ttm_vram_mgr to register its mutex with the buddy manager
after initialization.
Alexander Aring [Mon, 27 Apr 2026 15:59:35 +0000 (11:59 -0400)]
dlm: init per node debugfs before add to node hash
Avoiding potential issues when a node is added to the hash but the
debugfs is not NULL or IS_ERR() so a potential iteration over the hash
and debugfs_remove() will not fail like in dlm_midcomms_exit().
However dlm_midcomms_exit() will be called in module init/exit function
and the hash should be empty anyway at those stages. We change the
behavior as cleanup to avoid potential issues.
Reported-by: Ginger <ginger.jzllee@gmail.com> Closes: https://lore.kernel.org/gfs2/CAGp+u1ZE7UsQ4sSUHBKQXU8x3M_jwK=ek1urSjEtd3jXQGFmVg@mail.gmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
Alexander Aring [Mon, 27 Apr 2026 15:59:34 +0000 (11:59 -0400)]
dlm: fix add msg handle in send_queue ordered
In a benchmark scenario triggering a lot of requests that triggers a lot
of DLM messages on the network it can be that the mh->seq is not ordered
according the oldest seq number. This ordering is required by
dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older
sequence numbers that are ordered in the tail of "node->send_queue".
The side effects of not having it correct ordered regarding
"before(mh->seq, seq)" are refcounting issues and use-after free.
I only was able to reproduce this issue in a experimental DLM branch
and a user space DLM benchmark that uses io_uring. After changing this I
don't experienced any refcounting with the sending buffer issues anymore.
Fixes: 489d8e559c659 ("fs: dlm: add reliable connection if reconnect") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
The dlm_cb slab cache is created with kmem_cache_create(), which
provides no usercopy whitelist. When a callback carries LVB data,
dlm_user_add_ast() copies the LVB into the inline lvbptr[] array within
the slab-allocated struct dlm_callback and redirects ua->lksb.sb_lvbptr
to point to it. copy_result_to_user() then calls copy_to_user() with
this pointer. With CONFIG_HARDENED_USERCOPY enabled, this triggers
usercopy_abort().
Switch to kmem_cache_create_usercopy() with a whitelist covering the
lvbptr field.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu> Acked-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
Li RongQing [Mon, 27 Apr 2026 15:59:32 +0000 (11:59 -0400)]
dlm: use hlist_for_each_entry_srcu for SRCU protected lists
The connection and node hash tables in DLM are protected by SRCU, but
the code currently uses hlist_for_each_entry_rcu() for traversal.
While this works functionally, it is semantically incorrect and triggers
warnings when RCU lockdep debugging is enabled, as it expects regular
RCU read-side critical sections.
This patch replaces the incorrect macros with hlist_for_each_entry_srcu()
and adds the appropriate lockdep expressions using srcu_read_lock_held()
to ensure consistency with the underlying locking mechanism.
Signed-off-by: Li RongQing <lirongqing@baidu.com> Acked-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
Arnd Bergmann [Fri, 8 May 2026 13:33:30 +0000 (15:33 +0200)]
Merge tag 'riscv-dt-fixes-for-v7.1-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V devicetrees fixes for v7.1-rc3
Microchip:
Fix a pinctrl misconfiguration caused by a erratum fixed between
engineering sample and production silicon, that causes settings for one
to not apply to the other.
Starfive:
Remove nodes relating to the "camss" video device that has been deleted
entirely from staging.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v7.1-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: fix icicle i2c pinctrl configuration
riscv: dts: starfive: jh7110: Drop CAMSS node
Ming Lei [Fri, 8 May 2026 12:37:46 +0000 (20:37 +0800)]
ublk: fix use-after-free in ublk_cancel_cmd()
When ublk_reset_ch_dev() clears io->cmd via ublk_queue_reinit()
concurrently with ublk_cancel_cmd(), ublk_cancel_cmd() can read a
stale pointer and pass it to io_uring_cmd_done(), causing a
use-after-free.
Fix by synchronizing the two paths with ubq->cancel_lock:
- ublk_cancel_cmd(): read and clear io->cmd under cancel_lock,
then call io_uring_cmd_done() on the saved local copy outside
the lock.
- ublk_reset_ch_dev(): hold cancel_lock across ublk_queue_reinit()
so that io->cmd and io->flags are cleared atomically with respect
to ublk_cancel_cmd().
Sven Eckelmann [Wed, 6 May 2026 20:20:52 +0000 (22:20 +0200)]
batman-adv: bla: put backbone reference on failed claim hash insert
When batadv_bla_add_claim() fails to insert a new claim into the hash, it
leaked a reference to the backbone_gw for which the claim was intended.
Call batadv_backbone_gw_put() on the error path to release the reference
and avoid leaking the backbone_gw object.
Sven Eckelmann [Wed, 6 May 2026 20:20:51 +0000 (22:20 +0200)]
batman-adv: bla: only purge non-released claims
When batadv_bla_purge_claims() goes through the list of claims, it is only
traversing the hash list with an rcu_read_lock(). Due to a potential
parallel batadv_claim_put(), it can happen that it encounters a claim which
was actually in the process of being released+freed by
batadv_claim_release(). In this case, backbone_gw is set to NULL before the
delayed RCU kfree is started. Calling batadv_bla_claim_get_backbone_gw() is
then no longer allowed because it would cause a NULL-ptr derefence.
To avoid this, only claims with a valid reference counter must be purged.
All others are already taken care of.
Sven Eckelmann [Wed, 6 May 2026 20:20:50 +0000 (22:20 +0200)]
batman-adv: bla: prevent use-after-free when deleting claims
When batadv_bla_del_backbone_claims() removes all claims for a backbone, it
does this by dropping the link entry in the hash list. This list entry
itself was one of the references which need to be dropped at the same time
via batadv_claim_put().
But the batadv_claim_put() must not be done before the last access to the
claim object in this function. Otherwise the claim might be freed already
by the batadv_claim_release() function before the list entry was dropped.
Sven Eckelmann [Wed, 6 May 2026 20:20:49 +0000 (22:20 +0200)]
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
When batadv_tp_start() or batadv_tp_init_recv() fail to allocate a new
tp_vars object, the previously incremented bat_priv->tp_num counter is
never decremented. This causes tp_num to drift upward on each allocation
failure. Since only BATADV_TP_MAX_NUM sessions can be started and the count
is never reduced for these failed allocations, it causes to an exhaustion
of throughput meter sessions. In worst case, no new throughput meter
session can be started until the mesh interface is removed.
The error handling must decrement tp_num releasing the lock and aborting
the creation of an throughput meter session
Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Jiexun Wang [Sun, 3 May 2026 04:28:58 +0000 (12:28 +0800)]
batman-adv: stop caching unowned originator pointers in BAT IV
BAT IV keeps the last-hop neighbor address in each neigh_node, but some
paths also cache an originator pointer derived from a temporary lookup.
That pointer is not owned by the neigh_node and may no longer refer to a
live originator entry after purge handling runs.
Stop storing the auxiliary originator pointer in the BAT IV neighbor
state. When BAT IV needs the neighbor originator data, resolve it from
the stored neighbor address and drop the reference again after use.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
[sven: avoid bonding logic for outgoing OGM] Signed-off-by: Sven Eckelmann <sven@narfation.org>
Arvind Yadav [Wed, 6 May 2026 13:20:27 +0000 (18:50 +0530)]
drm/xe/madvise: Track purgeability with BO-local counters
xe_bo_recompute_purgeable_state() walks all VMAs of a BO to determine
whether the BO can be made purgeable. This makes VMA create/destroy and
madvise updates O(n) in the number of mappings.
Replace the walk with BO-local counters protected by the BO dma-resv
lock:
- vma_count tracks the number of VMAs mapping the BO.
- willneed_count tracks active WILLNEED holders, including WILLNEED
VMAs and active dma-buf exports for non-imported BOs.
A DONTNEED BO is promoted back to WILLNEED on a 0->1 transition of
willneed_count. A BO is demoted to DONTNEED on a 1->0 transition only
when it still has VMAs, preserving the previous behaviour where a BO
with no mappings keeps its current madvise state.
Fixes: 4f44961eab84 ("drm/xe/vm: Prevent binding of purged buffer objects")
v2:
- Use early return for imported BOs in all four helpers to avoid
nesting (Matt B).
- Group purgeability state into a purgeable sub-struct on struct
xe_bo (Matt B).
- Reword xe_bo_willneed_put_locked() kernel-doc to explain that a 1->0
transition means all remaining active VMAs are DONTNEED (Matt B).
v3:
- Move DONTNEED/PURGED reject from vma_lock_and_validate() into
xe_vma_create(), gated on attr->purgeable_state == WILLNEED.
Fixes vm_bind bypass and partial-unbind rejection on DONTNEED
BOs (Matt B).
- Drop .check_purged from MAP and REMAP; keep it for PREFETCH and
add a comment why (Matt B).
- Skip BO validation in vma_lock_and_validate() for non-WILLNEED
VMA remnants so cleanup/remap paths do not repopulate
DONTNEED/PURGED BOs.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260506132027.2556046-1-arvind.yadav@intel.com Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Ben Horgan [Wed, 6 May 2026 08:28:55 +0000 (09:28 +0100)]
fs/resctrl: Document tasks file behaviour for task id 0 and idle tasks
When 0 is written to the tasks file it is interpreted as the current task in
rdtgroup_move_task(). Each CPU's idle task has task_struct::pid set to 0 and,
on x86, task_struct::closid to RESCTRL_RESERVED_CLOSID and task_struct::rmid
to RESCTRL_RESERVED_RMID.
Equivalently, on MPAM platforms, thread_info::mpam_partid_pmg is encoded with
PARTID and PMG set to RESCTRL_RESERVED_CLOSID and RESCTRL_RESERVED_RMID,
respectively. As there is no interface to change these from the default, the
resctrl configuration for the idle tasks is fixed and they always behave
equivalently to a task in the default tasks file and so take their
configuration from the cpus/cpus_list files.
On read of the tasks file, show_rdt_tasks() filters out any 0 PID. Hence, a
task id of 0 is never shown in the tasks file and the idle tasks are not
represented either.
Ben Horgan [Wed, 6 May 2026 08:28:53 +0000 (09:28 +0100)]
fs/resctrl: Continue counter allocation after failure
In mbm_event mode, with mbm_assign_on_mkdir set to 1, when a user creates a
new CTRL_MON or MON group resctrl attempts to allocate counters for each of
the supported MBM events on each resctrl domain. As counters are limited,
such allocation may fail and when it does counter allocations for the
remaining domains are skipped even if the domains have available counters.
Because of that, the user needs to view the resource group'smbm_L3_assignments
file to get an accurate view of counter assignment in a new resource group and
then manually create counters in the skipped domains with available counters.
Writes to mbm_L3_assignments using the wildcard format, <event>:*=e, also skip
counter allocation in other domains after a counter allocation failure.
When handling a request to create counters in all domains it is unnecessary
for a counter allocation in one domain to prevent counter allocation in
other domains. Always attempt to allocate all the counters requested.
Francis, David [Tue, 28 Apr 2026 19:25:50 +0000 (19:25 +0000)]
drm: Set old handle to NULL before prime swap in change_handle
There was a potential race condition in change_handle. The ioctl
briefly had a single object with two idr entries; a concurrent
gem_close could delete the object and remove one of the handles
while leaving the other one dangling, which could subsequently
be dereferenced for a use-after-free.
To fix this, do the same dance that gem_close itself does.
(f6cd7daecff5 drm: Release driver references to handle before making it available again)
First idr_replace the old handle to NULL. Later, if the prime
operations are successful, actually close it.
create_tail required a similar dance to avoid a similar problem.
(bd46cece51a3 drm/gem: Fix race in drm_gem_handle_create_tail())
It idr_allocs the new handle with NULL, then swaps in the correct
object later to avoid races. We don't need to do that here, since
the only operations that could race are drm_prime, and
change_handle holds the prime lock for the entire duration.
v2: cleanups of error paths
Signed-off-by: David Francis <David.Francis@amd.com> Co-authored-by: Dave Airlie <airlied@gmail.com> Reported-by: Puttimet Thammasaeng <pwn8official@gmail.com> Tested-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: stable@vger.kernel.org Cc: Christian Koenig <Christian.Koenig@amd.com> Fixes: 53096728b8910 ("drm: Add DRM prime interface to reassign GEM handle") Signed-off-by: Dave Airlie <airlied@redhat.com>
John Walker [Thu, 7 May 2026 23:07:20 +0000 (17:07 -0600)]
wifi: cfg80211: advance loop vars in cfg80211_merge_profile()
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way.
Cc: stable@vger.kernel.org Fixes: fe806e4992c9 ("cfg80211: support profile split between elements") Signed-off-by: John Walker <johnwalker0@gmail.com> Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
K Prateek Nayak [Fri, 8 May 2026 05:17:48 +0000 (05:17 +0000)]
cpufreq/amd-pstate-ut: Drop policy reference before driver switch
Recent changes to the EPP unit test tries to perform a driver switch
with a cpufreq_policy reference held when the driver is loaded into
anything but the active mode which leads to a circular dependency and
the unit test hanging indefinitely.
Drop the reference before driver switch and grab it back once the driver
mode is stabilized for the test.
The EPP writes are only possible with CPUFREQ_POLICY_POWERSAVE policy.
Temporarily switch the cpudata->policy (while holding the write end of
the policy->rwsem) to CPUFREQ_POLICY_POWERSAVE and restore the original
policy once tests are done. To ensure the final EPP is correct in case
the driver started with CPUFREQ_POLICY_PERFORMANCE, EPP performance is
tested last.
The __free() based cleanup for cpufreq_policy is lost in the process.
Reported-by: Kalpana Shetty <kalpana.shetty@amd.com> Fixes: 7e173bc310d2b ("cpufreq/amd-pstate-ut: Add a unit test for raw EPP") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-7-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
K Prateek Nayak [Fri, 8 May 2026 05:17:47 +0000 (05:17 +0000)]
cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled
If "dynamic_epp" is disabled, the driver initialization and the default
EPP selection from sysfs currently sets the EPP based on the power
supply state of the system at that time but there is no power supply
callbacks registered to toggle it when the power supply state changes.
This can lead to faster battery drain on platforms that start off while
being plugged to the wall but later move to battery power since the EPP
stays at AMD_CPPC_EPP_PERFORMANCE.
Use "epp_default_dc" as the default EPP selection when dynamic_epp is
disabled, restoring older behavior. On servers, this defaults to
AMD_CPPC_EPP_PERFORMANCE and on other platforms, it defaults to
AMD_CPPC_EPP_BALANCE_PERFORMANCE.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-6-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
K Prateek Nayak [Fri, 8 May 2026 05:17:46 +0000 (05:17 +0000)]
cpufreq/amd-pstate: Reorder notifier unregistration and floor perf reset
An active power supply notifier can race with amd_pstate_epp_cpu_exit()
trying to reset the floor perf and can overwrite the floor perf set in
MSR_AMD_CPPC_REQ.
Unregister the notifier before setting the floor perf to prevent the
rare race.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-5-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
K Prateek Nayak [Fri, 8 May 2026 05:17:45 +0000 (05:17 +0000)]
cpufreq/amd-pstate: Allow writes to dynamic_epp when state isn't modified
Writing the current "dynamic_epp" state to sysfs fails with -EINVAL even
though the desired result was achieved. Allow writes to "dynamic_epp"
that does not modify the state.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-4-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
K Prateek Nayak [Fri, 8 May 2026 05:17:44 +0000 (05:17 +0000)]
cpufreq/amd-pstate: Return -ENOMEM on failure to allocate profile_name
Failure to allocate profile name will return -EINVAL from
platform_profile_register() while in fact, it is a failure to allocate
memory for the profile_name string.
Return -ENOMEM when kasprintf() fails to allocate profile_name string.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-3-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
hits the WARN_ON_ONCE() in static_key_disable_cpuslocked() and hangs the
system since both sysfs writes are trying to do
amd_pstate_change_driver_mode() without any synchronization.
Grab the "amd_pstate_driver_lock" mutex when modifying "dynamic_epp" to
prevent the two paths from racing with each other. Add a lockdep
assertion for "amd_pstate_driver_lock" in
amd_pstate_change_driver_mode() to formalize the dependency.
Since "cppc_mode" is stable under "amd_pstate_driver_lock", only reload
the driver when in "AMD_PSTATE_ACTIVE" mode and reject all writes when
in passive or guided mode, or if the driver is not loaded, since only
active mode operates on EPP.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-2-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Dave Airlie [Fri, 8 May 2026 04:14:24 +0000 (14:14 +1000)]
Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Hui Wang [Wed, 6 May 2026 13:21:52 +0000 (21:21 +0800)]
riscv: cpufeature: Use pre-defined ISA ext macros to index isa2hwcap
We have pre-defined ISA extension macros, here use those macros to
replace a magic number for isa2hwcap definition and some array
indexing for isa2hwcap access.
This doesn't change the original functionality, just improve the code
maintainability and readability.
Abel Vesa [Mon, 4 May 2026 15:56:52 +0000 (18:56 +0300)]
dt-bindings: soc: qcom,aoss-qmp: Document the Eliza Always-On Subsystem side channel
Document the Always-On Subsystem (AOSS) side channel found on the Qualcomm
Eliza SoC. It is used for communication with other clients, like
remoteprocs.
Add the missing QSPI-to-memory interconnect path alongside the existing
configuration path. Without this path, the interconnect framework cannot
correctly vote for the bandwidth required by QSPI DMA data transfers.
Add the missing QSPI-to-memory interconnect path alongside the existing
configuration path. Without it, the interconnect framework cannot vote for
the bandwidth required by QSPI DMA data transfers.
arm64: dts: qcom: qcs615-ride: Enable QSPI and NOR flash
The QCS615 Ride board has a SPI-NOR flash connected to the QSPI controller
on CS0. Enable the QSPI controller and add the corresponding SPI-NOR flash
node to allow the system to access it.
The Talos (QCS615) platform includes a QSPI controller used for accessing
external flash storage. Add the QSPI OPP table, TLMM pinmux entries, and
the QSPI controller node to enable support for this hardware.
Harshal Dev [Tue, 5 May 2026 07:40:04 +0000 (13:10 +0530)]
arm64: dts: qcom: glymur: Add crypto engine and BAM
On almost all Qualcomm platforms, including Glymur, there is a Crypto
engine IP block to which the CPU can off-load cryptographic computations
for achieving acceleration.
The engine is also DMA capable due to the presence of an associated Bus
Access Manager (BAM) module.
The testsuite defines several kprobes and kretprobes as static variables
that are preserved across test runs.
After register_kprobe and unregister_kprobe, a kprobe contains some
leftover data that must be cleared before the kprobe can be registered
again. The tests are setting symbol_name to define the probe location.
Address and flags must be cleared.
The existing code clears some of the probes between subsequent tests, but
not between two test runs. The leftover data from a previous test run
makes the registrations fail in the next run.
Move the cleanups for all kprobes into kprobes_test_init, this function
is called before each single test (including the first test of a test
run).
Jianpeng Chang [Fri, 8 May 2026 00:56:36 +0000 (09:56 +0900)]
kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist()
When kprobe_add_area_blacklist() iterates through a section like
.kprobes.text, the start address may not correspond to a named symbol.
On ARM64 with CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS=y (introduced by
commit baaf553d3bc3 ("arm64: Implement
HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")), the compiler flag
-fpatchable-function-entry=4,2 inserts 2 NOPs before each function entry
point for ftrace call_ops. These pre-function NOPs sit at the section base
address, before the first named function symbol. The compiler emits a $x
mapping symbol at offset 0x00 to mark the start of code, but
find_kallsyms_symbol() ignores mapping symbols.
Without CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS (e.g. defconfig), no
pre-function NOPs are inserted, the first function starts at offset
0x00, and the bug does not trigger.
This only affects modules that have a .kprobes.text section (i.e. those
using the __kprobes annotation). Modules using NOKPROBE_SYMBOL() instead
(like kretprobe_example.ko) blacklist exact function addresses via the
_kprobe_blacklist section and are not affected.
For kprobe_example.ko on ARM64 with -fpatchable-function-entry=4,2,
the .kprobes.text section layout is:
kprobe_add_area_blacklist() starts iterating from the section base
address (offset 0x00), which only has the $x mapping symbol.
kprobe_add_ksym_blacklist() then calls kallsyms_lookup_size_offset()
for this address, which goes through:
find_kallsyms_symbol() scans all module symbols to find the closest
preceding symbol.
Since no named text symbol exists at offset 0x00,
find_kallsyms_symbol() picks __UNIQUE_ID_vermagic (a .modinfo symbol
whose address is in the temporary image) as the "best" match. The
computed "size" = next_text_symbol - modinfo_symbol spans across
these two unrelated memory regions, creating a blacklist entry with
a bogus range of tens of terabytes.
Whether this causes a visible failure depends on address randomization,
here is what happens on Raspberry Pi 4/5:
- On RPi5, the bogus size was ~35 TB. start + size stayed within
64-bit range, so the blacklist entry covered the entire kernel
text. register_kprobe() in the module's own init function failed
with -EINVAL.
- On RPi4, the bogus size was ~75 TB. start + size overflowed
64 bits and wrapped to a small address near zero. The range
check (addr >= start && addr < end) then failed because end
wrapped around, so the bogus entry was accidentally harmless
and kprobes worked by luck.
The same bug exists on both machines, but randomization determines whether
the integer overflow masks it or not.
Fix this by adding notrace to the __kprobes macro. Functions in
.kprobes.text are kprobe infrastructure handlers that should never be
traced by ftrace. With notrace, the compiler stops inserting them and the
non-symbol gap at the section start disappears entirely.
tegra210_mixer_configure_gain() divides a 64-bit BIT_ULL() value by the
fade duration. On 32-bit MIPS, clang emits a call to __udivdi3 for that
plain C division, but that compiler helper is not exported to modules.
Use div_u64() for the inverse duration calculation so the driver uses the
kernel's 64-bit division helper instead of emitting a compiler runtime
call.
Linus Torvalds [Fri, 8 May 2026 00:26:43 +0000 (17:26 -0700)]
Merge tag 'selinux-pr-20260507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Allow for multiple opens of /sys/fs/selinux/policy
Prevent a single process from blocking others from reading the
SELinux policy loaded in the kernel. This does have the side effect
of potentially allowing userspace to trigger additional kernel memory
allocations as part of the open/read operation, but this is mitigated
by requiring the SELinux security/read_policy permission.
- Reduce the critical sections where the SELinux policy mutex is held
This includes the patch to the policy loader code where we move the
permission checks and an allocation outside the mutex as well as the
the patch to checkreqprot which drops the code/lock entirely.
While the checkreqprot code had effectively been dropped in an
earlier release, portions of the code still remained that would have
triggered the mutex to perform an IMA measurement. This finally drops
all of that while preserving the user visible behavior.
- Eliminate potential sources of log spamming
There were a few areas where processes could flood the system logs
and hide other, more critical events. The previously disabled
checkreqprot and runtime disable knobs in selinuxfs were two such
areas that have now been greatly simplified and a pr_err() replaced
with a pr_err_once().
The third such place is the /sys/fs/selinux/user file, which hasn't
been used by a userspace release since 2020 and was scheduled for
removal after 2025; this effectively disables this functionality, but
similar to checkreqprot, it is done in a way that should not break
old userspace.
* tag 'selinux-pr-20260507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: shrink critical section in sel_write_load()
selinux: allow multiple opens of /sys/fs/selinux/policy
selinux: prune /sys/fs/selinux/user
selinux: prune /sys/fs/selinux/disable
selinux: prune /sys/fs/selinux/checkreqprot
Li Xiasong [Thu, 7 May 2026 14:04:22 +0000 (22:04 +0800)]
netfilter: nf_conntrack_sip: get helper before allocating expectation
process_register_request() allocates an expectation and then checks
whether a conntrack helper is available. If helper lookup fails, the
function returns early and the allocated expectation is left behind.
Reorder the code to fetch and validate helper before calling
nf_ct_expect_alloc(). This keeps the logic simpler and removes the leak
path while preserving existing behavior.
Fixes: e14575fa7529 ("netfilter: nf_conntrack: use rcu accessors where needed") Cc: stable@vger.kernel.org Signed-off-by: Li Xiasong <lixiasong1@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_conntrack_expect: restore helper propagation via expectation
A recent series to fix expectations broke helper propagation via
expectation, this mechanism is used by the sip and h323 helper. This
also propagates the conntrack helper to expected connections. I changed
semantics of exp->helper which now tells us the actual helper that
created the expectation.
Add an explicit assign_helper field to expectations for this purpose
and update helpers to use it.
Restore this feature for userspace conntrack helper via ctnetlink
nfqueue integration so it is again possible to attach a helper to an
expectation, where it makes sense. This is not restored via ctnetlink
expectation creation as there is no client for such feature. Use the
expectation layer 4 protocol number for the helper lookup for
consistency.
Make sure the expectation using this helper propagation mechanism also
go away when the helper is unregistered.
netfilter: bridge: eb_tables: close module init race
sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables.
Fixes: 5b53951cfc85 ("netfilter: ebtables: use net_generic infra") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: x_tables: close dangling table module init race
Similar to the previous ebtables patch:
template add exposes the table to userspace, we must do this last to
rnsure the pernet ops are set up (contain the destructors).
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: ebtables: close dangling table module init race
sashiko reported for a related patch:
In modules like iptable_raw.c, [..], if register_pernet_subsys() fails,
the rollback might call kfree(rawtable_ops) before [..]
During this window, could a concurrent userspace process find the globally
visible template, trigger table_init(), [..]
The table init functions must always register the template last.
Otherwise, set/getsockopt can instantiate a table in a namespace
while the required pernet ops (contain the destructor) isn't available.
This change is also required in x_tables, handled in followup change.
Fixes: 87663c39f898 ("netfilter: ebtables: do not hook tables by default") Reviewed-by: Tristan Madani <tristan@talencesecurity.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: x_tables: add and use xtables_unregister_table_exit
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table().
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: Tristan Madani <tristan@talencesecurity.com> Reviewed-by: Tristan Madani <tristan@talencesecurity.com> Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/ Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: x_tables: unregister the templates first
When the module is going away we need to zap the template
first. Else there is a small race window where userspace
could instantiate a new table after the pernet exit function
has removed the current table.
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: Tristan Madani <tristan@talencesecurity.com> Reviewed-by: Tristan Madani <tristan@talencesecurity.com> Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/ Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: x_tables: add and use xt_unregister_table_pre_exit
Remove the copypasted variants of _pre_exit and add one single
function in the xtables core. ebtables is not compatible with
x_tables and therefore unchanged.
This is a preparation patch to reduce noise in the followup
bug fixes.
netfilter: x_tables: allocate hook ops while under mutex
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
At the moment we emit the audit log a bit too early, which makes it
necessary to also emit an unregister log in case we have to unwind
errors after possible hook register failure.
Followup patch will be slightly simpler if we can delay the
register message until after the hooks have been wired up.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tabrez Ahmed [Sat, 2 May 2026 02:08:42 +0000 (07:38 +0530)]
hwmon: (ads7871) Fix endianness bug in 16-bit register reads
The ads7871_read_reg16() function relies on spi_w8r16() to read the
16-bit sensor output. The ADS7871 device transmits the Least Significant
Byte (LSB) first.
On Little-Endian architectures, spi_w8r16() correctly reconstructs the
16-bit value. However, on Big-Endian architectures, the byte swapping
causes the first received byte (LSB) to be placed in the most significant
byte of the u16, resulting in corrupted voltage readings.
To fix this, cast the integer result of spi_w8r16() to a restricted
__le16 type and convert it to the host CPU's native byte order using
le16_to_cpu(). Negative error codes returned by the SPI core are caught
and returned prior to the conversion to avoid mangling the error status.
Reported-by: Sashiko <sashiko-bot@kernel.org> Closes: https://sashiko.dev/#/patchset/20260418034601.90226-1-tabreztalks@gmail.com Fixes: e0c70b8078629 ("hwmon: add TI ads7871 a/d converter driver") Suggested-by: David Laight <david.laight.linux@gmail.com> Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com> Link: https://lore.kernel.org/r/20260502020844.110038-2-tabreztalks@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sensors configurations are defined by set and clear masks. These
do not follow a consistent "clear mask is a superset of set mask"
rule. This relaxed definition breaks lm75_write_config()
Basically all bits from set_mask that are not defined in clr_mask are
dropped. Fix that by enhancing the helper to always combine clr_mask
and set_mask into the mask bits of regmap_update_bits().
hwmon: (lm75) Fix AS6200 and TMP112 setup and alarm handling
The initialization of the AS6200 has two shortcomings
- The device-add-commit states "Conversion mode: continuous" but the
the lm75_params structure uses set_mask = 0x94c0. This activates
single shot mode (bit 15). According to the datasheet "The device
features a single shot measurement mode if the device is in sleep
mode (SM=1)". This is quite contradictionary.
- It is the only device that activates polarity active-high (bit 10)
All this is paired with a undefined clear mask bug in function
lm75_write_config() that was introduced with a later refactoring
commit.
[as6200] = {
.config_reg_16bits = true,
.set_mask = 0x94C0,
-> .clr_mask not defined here
.default_resolution = 12,
...
static inline int lm75_write_config(struct lm75_data *data, u16 set_mask,
u16 clr_mask)
{
return regmap_update_bits(data->regmap, LM75_REG_CONF,
clr_mask | LM75_SHUTDOWN, set_mask);
}
regmap_update_bits() requires clr_mask to be a superset of set_mask.
So basically all sensors with "wrong" masks like the AS6200 are not
initialized as intended.
Fix that by
- Change the set_mask to 0xc010 to reflect the current active-low
setup properly and to drive the sensor in continous mode. This
takes into account that the config register is little endian and
the first byte sent to the chip is the LSB.
- Adapt the alarm handling so it can report the alarm correctly
even if it is high active. This is done by comparing config register
bit 5 and 10 (translated to 2 and 13).
This commit does not introduce any ABI breakage as the mutliple bugs
effectly drive the AS6200 in standard active-low mode.
Fixes: 4b6358e1fe46 ("hwmon: (lm75) Add AMS AS6200 temperature sensor") Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: https://lore.kernel.org/r/20260502173207.3567876-2-markus.stockhausen@gmx.de
[groeck: Update set_mask for as6200 further: As modeled, the upper bits
contain the conversion rate, so the config register needs to be set to
0xc010 instead of 0x10c0 to reflect 8 samples/s and 4 consecutive faults.
Fix the same problem for TMP112.] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Dave Airlie [Thu, 7 May 2026 22:51:01 +0000 (08:51 +1000)]
Merge tag 'drm-xe-fixes-2026-05-07' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Add NULL check for media_gt in intel_hdcp_gsc_check_status (Gustavo)
- Fix EAGAIN sign in pf_migration_consume (Shuicheng)
- Fix MMIO access using PF view instead of VF view during migration (Shuicheng)
- Exclude indirect ring state page from ADS engine state size (Satya)
Dave Airlie [Thu, 7 May 2026 22:34:34 +0000 (08:34 +1000)]
Merge tag 'drm-rust-fixes-2026-05-07' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-fixes
DRM Rust fixes for v7.1-rc3
- Fix unsound initialization in drm::Device::new(); if pinned
initialization of drm::Device::Data fails, make sure
drm::Device::release() isn't called, so we don't run the data's
destructor
- Fix missing GEM state cleanup in the init failure case; call
drm_gem_private_object_fini() if drm_gem_object_init() fails
- Fix wrong ARef import in the DRM shmem GEM helper abstraction
- Replace the nouveau mailing list with the new nova-gpu mailing list
for both nova-core and nova-drm, and remove unused patchwork entries
Robbie Ko [Fri, 1 May 2026 02:41:56 +0000 (10:41 +0800)]
btrfs: fix incorrect i_size after remount caused by KEEP_SIZE prealloc gap
When fallocate() with FALLOC_FL_KEEP_SIZE preallocates an extent past the
current i_size, the file_extent_tree of the inode is updated to cover
that range. However, on the next mount, btrfs_read_locked_inode() only
re-populates file_extent_tree with [0, round_up(i_size, sectorsize)),
losing the marks that belonged to the KEEP_SIZE prealloc extent beyond
i_size.
Later, when a non-KEEP_SIZE fallocate() extends i_size into / past that
old prealloc extent, the reservation loop in btrfs_fallocate() skips
already-prealloc segments and does not call into the path that marks the
file_extent_tree, so a gap remains inside the file_extent_tree across
[old_aligned_i_size, start_of_new_alloc). Then __btrfs_prealloc_file_range()
calls btrfs_inode_safe_disk_i_size_write(), which uses
find_contiguous_extent_bit() starting at offset 0 to derive disk_i_size.
The walk stops at the gap, so disk_i_size ends up smaller than i_size and
gets persisted. After the next mount, the file shows the wrong (smaller)
size.
# non-KEEP_SIZE fallocate that overlaps the previous prealloc tail
# and extends past it
fallocate -o 7M -l 2M $MNT/file1
ls -lh $MNT/file1
umount $MNT
mount $DEV $MNT
ls -lh $MNT/file1
umount $MNT
Running the reproducer gives the following result:
The size before the second mount is correct (9M), but after the
remount it drops to 7M, i.e. the start of the gap inside file_extent_tree.
Fix this in __btrfs_prealloc_file_range() by marking the entire range
[round_down(old_i_size, sectorsize), round_up(new_i_size, sectorsize))
in file_extent_tree before updating i_size and calling
btrfs_inode_safe_disk_i_size_write(). This ensures the contiguous bit
search starting from 0 is not truncated by a stale gap left behind by a
previous KEEP_SIZE prealloc that was not restored on inode load.
The fix has no effect when the NO_HOLES feature is enabled because
btrfs_inode_safe_disk_i_size_write() and
btrfs_inode_set_file_extent_range()
both take the fast path that directly tracks disk_i_size without
consulting file_extent_tree.
Fixes: 9ddc959e802b ("btrfs: use the file extent tree infrastructure") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Robbie Ko <robbieko@synology.com>
[ Minor updates to the change log ] Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: only release the dirty pages io tree after successful writes
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
[FIX]
Normally such dirty ebs won't cause problems, as when the iput() is
called on the btree inode, the dirty ebs will be forcibly written back,
and since the fs is already in an error status, such writeback will not
reach disk and finish immediately.
But it's still better to get rid of such dirty ebs, if we ended up with
dirty ebs but the fs is not in an error status, then such writeback at
iput() time will be too late, as all workers are already stopped but
writeback will utilize workers, which will lead to NULL pointer
dereferences.
Instead of unconditionally calling btrfs_extent_io_tree_release(), only
call it if btrfs_write_and_wait_transaction() finished successfully, so
that @dirty_pages extent io tree is kept untouched for transaction
cleanup.
CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 28 Apr 2026 15:58:56 +0000 (16:58 +0100)]
btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter().
Fixes: a85b46db143f ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()") Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
(lldb) source list -a add_ra_bio_pages+0x13c
.../vmlinux.unstripped add_ra_bio_pages + 316 at .../fs/btrfs/compression.c:454:8
451
452 folio = filemap_alloc_folio(mapping_gfp_constraint(mapping, constraint_gfp),
453 0, NULL);
-> 454 if (!folio)
455 break;
I can reproduce this consistently by running a memory hog concurrently
with a buffered writer on a machine with a very large amount of swap.
Commit 7ae37b2c94ed ("btrfs: prevent direct reclaim during compressed
readahead") clearly intended to suppress these warnings. But because the
mask set in the address_space with mapping_set_gfp_mask() doesn't include
__GFP_NOWARN, mapping_gfp_constraint() removes it from constraint_gfp
before it is passed to filemap_alloc_folio().
Fix by refactoring the code to add __GFP_NOWARN after the call to
mapping_gfp_constraint().
Fixes: 7ae37b2c94ed ("btrfs: prevent direct reclaim during compressed readahead") Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
ZhengYuan Huang [Wed, 25 Mar 2026 00:43:39 +0000 (08:43 +0800)]
btrfs: fix check_chunk_block_group_mappings() to iterate all chunk maps
[BUG]
A corrupted image with a chunk present in the chunk tree but whose
corresponding block group item is missing from the extent tree can be
mounted successfully, even though check_chunk_block_group_mappings()
is supposed to catch exactly this corruption at mount time. Once
mounted, running btrfs balance with a usage filter (-dusage=N or
-dusage=min..max) triggers a null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
RIP: 0010:chunk_usage_filter fs/btrfs/volumes.c:3874 [inline]
RIP: 0010:should_balance_chunk fs/btrfs/volumes.c:4018 [inline]
RIP: 0010:__btrfs_balance fs/btrfs/volumes.c:4172 [inline]
RIP: 0010:btrfs_balance+0x2024/0x42b0 fs/btrfs/volumes.c:4604
[CAUSE]
The crash occurs because __btrfs_balance() iterates the on-disk chunk
tree, finds the orphaned chunk, calls chunk_usage_filter() (or
chunk_usage_range_filter()), which queries the in-memory block group
cache via btrfs_lookup_block_group(). Since no block group was ever
inserted for this chunk, the lookup returns NULL, and the subsequent
dereference of cache->used crashes.
check_chunk_block_group_mappings() uses btrfs_find_chunk_map() to
iterate the in-memory chunk map (fs_info->mapping_tree):
map = btrfs_find_chunk_map(fs_info, start, 1);
With @start = 0 and @length = 1, btrfs_find_chunk_map() looks for a
chunk map that *contains* the logical address 0. If no chunk contains
logical address 0, btrfs_find_chunk_map(fs_info, 0, 1) returns NULL
immediately and the loop breaks after the very first iteration,
having checked zero chunks. The entire verification function is therefore
a no-op, and the corrupted image passes the mount-time check undetected.
[FIX]
Replace the btrfs_find_chunk_map() based loop with a direct in-order
walk of fs_info->mapping_tree using rb_first_cached() + rb_next().
This guarantees that every chunk map in the tree is visited regardless
of the logical addresses involved.
No lock is taken around the traversal. This function is called during
mount from btrfs_read_block_groups(), which is invoked from open_ctree()
before any background threads (cleaner, transaction kthread, etc.) are
started. There are therefore no concurrent writers that could modify
mapping_tree at this point. An analogous lockless direct traversal of
mapping_tree already exists in fill_dummy_bgs() in the same file.
Since we walk the rb-tree directly via rb_entry() without going through
btrfs_find_chunk_map(), no reference is taken on each map entry, so the
btrfs_free_chunk_map() calls are also removed.
Signed-off-by: ZhengYuan Huang <gality369@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Tejun Heo [Thu, 7 May 2026 22:09:21 +0000 (12:09 -1000)]
sched_ext: Drop unused scx_find_sub_sched() stub
scx_find_sub_sched()'s only caller, scx_bpf_sub_dispatch(), is gated on
CONFIG_EXT_SUB_SCHED. When CONFIG_EXT_SUB_SCHED=n the caller compiles out
and the stub becomes dead code, tripping -Wunused-function on randconfigs.
Drop the stub.
Fixes: 25037af712eb ("sched_ext: Add rhashtable lookup for sub-schedulers") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202605080556.42PXw8U9-lkp@intel.com/ Signed-off-by: Tejun Heo <tj@kernel.org>
Tristan Madani [Tue, 5 May 2026 11:12:59 +0000 (11:12 +0000)]
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken.
Tristan Madani [Tue, 5 May 2026 11:12:58 +0000 (11:12 +0000)]
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward.
Chen Wandun [Thu, 7 May 2026 10:54:34 +0000 (18:54 +0800)]
cgroup/cpuset: move PF_EXITING check before __GFP_HARDWALL in cpuset_current_node_allowed()
Since prepare_alloc_pages() unconditionally adds __GFP_HARDWALL for the
fast path when cpusets are enabled, the __GFP_HARDWALL check in
cpuset_current_node_allowed() causes the PF_EXITING escape path to be
skipped on the first allocation attempt. This makes it unreachable in
the common case, so dying tasks can get stuck in direct reclaim or even
trigger OOM while trying to exit, despite being allowed to allocate from
any node.
Move the PF_EXITING check before __GFP_HARDWALL so that dying tasks
can allocate memory from any node to exit quickly, even when cpusets
are enabled.
Also update the function comment to reflect the actual behavior of
prepare_alloc_pages() and the corrected check ordering.
Signed-off-by: Chen Wandun <chenwandun@lixiang.com> Acked-by: Michal Koutný <mkoutny@suse.com> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Carlos Bilbao [Tue, 28 Apr 2026 04:01:04 +0000 (21:01 -0700)]
PCI/ASPM: Don't reconfigure ASPM entering low-power state
Reconfiguring ASPM when a device transitions to low-power state can enable
L1.1/L1.2 substates on the PCIe link at a time when the device is sleeping
and may be unable to exit them. ASPM should be reconfigured on D0 entry
(resume), not on the way down.
pci_set_low_power_state() calls pcie_aspm_pm_state_change() after writing
D3hot to PCI_PM_CTRL. pcie_aspm_pm_state_change() resets link->aspm_capable
to link->aspm_support and then calls pcie_config_aspm_path(), which can
enable ASPM L1.1/L1.2 substates on the PCIe link. If the device cannot
recover the link from L1.2 while in D3hot, subsequent config space reads
return 0xFFFF ("device inaccessible") and pci_power_up() fails with
messages like:
vfio-pci 0000:5d:00.0: Unable to change power state from D3hot to D0, device inaccessible
This was observed on NVIDIA H100 SXM5 GPUs bound to vfio-pci when Linux
runtime PM suspends them to D3hot: the GPU becomes permanently inaccessible
and disappears from the PCIe bus.
The call to pcie_aspm_pm_state_change() in pci_set_low_power_state() was
restored by f93e71aea6c6 ("Revert "PCI/ASPM: Remove
pcie_aspm_pm_state_change()""), which reverted 08d0cc5f3426 ("PCI/ASPM:
Remove pcie_aspm_pm_state_change()"). The revert was necessary because the
removal broke suspend/resume on certain platforms that required ASPM to be
reconfigured on D0 entry. However, the revert restored the call in both
pci_set_full_power_state() (D0 entry) and pci_set_low_power_state()
(low-power entry).
Only the D0-entry call is needed to fix the suspend/resume regression. The
low-power-entry call is harmful: reconfiguring ASPM immediately after
putting a device into D3hot can enable link substates that the device or
platform cannot exit while the device is sleeping.
Remove the pcie_aspm_pm_state_change() call from pci_set_low_power_state().
ASPM will still be reconfigured correctly when the device returns to D0 via
pci_set_full_power_state().
umh: replace use of system_unbound_wq with system_dfl_wq
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
rapidio: rio: add WQ_PERCPU to alloc_workqueue users
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
media: ddbridge: add WQ_PERCPU to alloc_workqueue users
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
platform: cznic: turris-omnia-mcu: replace use of system_wq with system_percpu_wq
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
Replace system_wq with system_percpu_wq, keeping the same behavior.
The old wq (system_wq) will be kept for a few release cycles.
Cc: Marek Behun <kabel@kernel.org> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Marek Behún <kabel@kernel.org>
media: synopsys: hdmirx: replace use of system_unbound_wq with system_dfl_wq
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
virt: acrn: Add WQ_PERCPU to alloc_workqueue users
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Nishad Saraf [Tue, 5 May 2026 16:09:36 +0000 (09:09 -0700)]
accel/amdxdna: Add AIE4 work buffer initialization
NPU firmware requires a host-allocated work buffer for hardware contexts.
Allocate a 4 MB host buffer and attach it to device during device init.
Refactor aie2_alloc_msg_buffer() and aie2_free_msg_buffer() into common
helpers by moving them to aie.c and renaming them to
amdxdna_alloc_msg_buffer() and amdxdna_free_msg_buffer(), allowing both
AIE2 and AIE4 to reuse the implementation.
David Zhang [Wed, 6 May 2026 16:16:42 +0000 (09:16 -0700)]
accel/amdxdna: Add AIE4 metadata query support
Add support for querying device metadata on AIE4 via a mailbox message.
Refactor aie2_get_aie_metadata() into a common helper by moving it to
aie.c and renaming it to amdxdna_get_metadata(), allowing both AIE2
and AIE4 to reuse the implementation.
David Zhang [Tue, 5 May 2026 16:09:34 +0000 (09:09 -0700)]
accel/amdxdna: Add command doorbell and wait support
Expose the command doorbell register to userspace on a per-hardware
context basis, enabling applications to notify the firmware of pending
commands via doorbell writes.
Introduce DRM_IOCTL_AMDXDNA_WAIT_CMD to allow userspace to wait for
completion of individual commands.
Lizhi Hou [Thu, 7 May 2026 04:02:07 +0000 (21:02 -0700)]
accel/amdxdna: Fix clflush buffer size
The firmware is told the buffer is req.buf_size bytes. It may read/write
the entire region. If the CPU only flushes a subset, the remaining cache
lines could contain stale data, causing the device to see garbage.
Tejun Heo [Thu, 7 May 2026 21:05:31 +0000 (11:05 -1000)]
sched_ext: Move scx_error() out of scx_link_sched()'s lock region
scx_link_sched() holds scx_sched_lock. The scx_error() calls inside take the
same lock through scx_claim_exit() and deadlock. Move them out of the guard.
Fixes: 6b4576b09714 ("sched_ext: Reject sub-sched attachment to a disabled parent") Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
smb: client: validate dacloffset before building DACL pointers
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points.
Fixes: bc3e9dd9d104 ("cifs: Change SIDs in ACEs while transferring file ownership.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Zisen Ye [Wed, 6 May 2026 03:49:08 +0000 (11:49 +0800)]
smb/client: fix out-of-bounds read in smb2_compound_op()
If a server sends a truncated response but a large OutputBufferLength, and
terminates the EA list early, check_wsl_eas() returns success without
validating that the entire OutputBufferLength fits within iov_len.
Then smb2_compound_op() does:
memcpy(idata->wsl.eas, data[0], size[0]);
Where size[0] is OutputBufferLength. If iov_len is smaller than size[0],
memcpy can read beyond the end of the rsp_iov allocation and leak adjacent
kernel heap memory.
Zisen Ye [Sat, 2 May 2026 10:48:36 +0000 (18:48 +0800)]
smb/client: fix out-of-bounds read in symlink_data()
Since smb2_check_message() returns success without length validation for
the symlink error response, in symlink_data() it is possible for
iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer
only contains the base SMB2 header (64 bytes), accessing
err->ErrorContextCount (at offset 66) or err->ByteCount later in
symlink_data() will cause an out-of-bounds read.
Piyush Sachdeva [Thu, 7 May 2026 16:52:14 +0000 (22:22 +0530)]
smb: client: Zero-pad short GSS session keys per MS-SMB2
Per MS-SMB2 section 3.2.5.3, Session.SessionKey is the first 16 bytes
of the GSS cryptographic key, right-padded with zero bytes if the key
is shorter than 16 bytes.
SMB2_auth_kerberos() copies the GSS session key from the cifs.upcall
response using kmemdup(msg->data, msg->sesskey_len, ...) and stores
the GSS-reported length verbatim in ses->auth_key.len. generate_key()
reads SMB2_NTLMV2_SESSKEY_SIZE bytes from this buffer when feeding the
HMAC-SHA256 KDF for signing key derivation. If a GSS mechanism returns
a session key shorter than 16 bytes (e.g. a deprecated single-DES
Kerberos enctype with an 8-byte session key), the KDF call performs an
out-of-bounds slab read and derives keys that do not match the server,
which pads per the spec.
Modern KDCs disable short-key enctypes by default, so this is latent
rather than reachable in production, but it is still a kernel heap
over-read.
Allocate auth_key.response with kzalloc() at a length of
max(msg->sesskey_len, SMB2_NTLMV2_SESSKEY_SIZE), copy the GSS key in,
and rely on kzalloc()'s zero initialization for the spec-mandated
padding. Set ses->auth_key.len to the padded length. Larger GSS keys
(e.g. the 32-byte aes256-cts-hmac-sha1-96 session key) continue to be
stored at their natural length, preserving the FullSessionKey path.
Emit a cifs_dbg(VFS, ...) message when a short key is encountered to
surface deprecated-enctype usage.
NTLMv2 and NTLMSSP code paths produce a 16-byte session key by
construction and are unaffected.
Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com> Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Piyush Sachdeva [Thu, 7 May 2026 16:52:13 +0000 (22:22 +0530)]
smb: client: Use FullSessionKey for AES-256 encryption key derivation
When Kerberos authentication is used with AES-256 encryption (AES-256-CCM
or AES-256-GCM), the SMB3 encryption and decryption keys must be derived
using the full session key (Session.FullSessionKey) rather than just the
first 16 bytes (Session.SessionKey).
Per MS-SMB2 section 3.2.5.3.1, when Connection.Dialect is "3.1.1" and
Connection.CipherId is AES-256-CCM or AES-256-GCM, Session.FullSessionKey
must be set to the full cryptographic key from the GSS authentication
context. The encryption and decryption key derivation (SMBC2SCipherKey,
SMBS2CCipherKey) must use this FullSessionKey as the KDF input. The
signing key derivation continues to use Session.SessionKey (first 16
bytes) in all cases.
Previously, generate_key() hardcoded SMB2_NTLMV2_SESSKEY_SIZE (16) as the
HMAC-SHA256 key input length for all derivations. When Kerberos with
AES-256 provides a 32-byte session key, the KDF for encryption/decryption
was using only the first 16 bytes, producing keys that did not match the
server's, causing mount failures with sec=krb5 and require_gcm_256=1.
Add a full_key_size parameter to generate_key() and pass the appropriate
size from generate_smb3signingkey():
- Signing: always SMB2_NTLMV2_SESSKEY_SIZE (16 bytes)
- Encryption/Decryption: ses->auth_key.len when AES-256, otherwise 16
Also fix cifs_dump_full_key() to report the actual session key length for
AES-256 instead of hardcoded CIFS_SESS_KEY_SIZE, so that userspace tools
like Wireshark receive the correct key for decryption.
Cc: <stable@vger.kernel.org> Reviewed-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com> Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
drm/dp/mst: fix buffer overflows in sideband chunk accumulation
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection.
projects / thirdparty / kernel / stable.git / log
