Linus Torvalds [Sat, 1 Aug 2026 16:02:45 +0000 (09:02 -0700)]
Merge tag 'i2c-fixes-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c fixes from Andi Shyti:
"A set of fixes across several host controller drivers. The largest
part addresses three issues in the i.MX driver, while the remaining
changes fix probe ordering, power management, timeout recovery and
error handling.
amd-mp2:
- unregister callback if adapter registration fails
designware:
- defer probe until child GPIO controllers are bound
imx:
- mark adapter suspended while hardware is powered down
- fix stale slave pointer and shared IRQ registration race
- stop slave timer before clearing slave pointer
iproc:
- reset controller if START_BUSY remains set after timeout
jz4780:
- cache clock rate to avoid clk_get_rate() deadlock
qcom-cci:
- rely on runtime PM helpers for system sleep
spacemit:
- request interrupt after clock initialization"
* tag 'i2c-fixes-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: qcom-cci: drop custom suspend/resume and rely on runtime PM helpers
i2c: imx: Cancel hrtimer before clearing slave pointer
i2c: imx: Fix slave registration race and error handling
i2c: iproc: reset bus after timeout if START_BUSY is stuck
i2c: imx: mark I2C adapter when hardware is powered down
i2c: designware: defer probe if child GpioInt controllers are not bound
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
i2c: amd-mp2: Unregister callback on adapter add failure
i2c: spacemit: request IRQ after controller initialization
Linus Torvalds [Sat, 1 Aug 2026 03:45:28 +0000 (20:45 -0700)]
Merge tag 'kbuild-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix regression with MO= when building out of tree kernel modules due
to incorrectly overwriting build tree's Makefile
- Avoid stripping .BTF sections from modules when building debug .rpm
packages
* tag 'kbuild-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: rpm-pkg: Preserve BTF sections in kernel modules during debuginfo stripping
kbuild: Stop modifying $(objtree)/Makefile when building oot-kmods oos
Linus Torvalds [Sat, 1 Aug 2026 03:24:11 +0000 (20:24 -0700)]
Merge tag 'trace-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Reset dropped_count in mmio_reset_data()
When mmio_reset_data() is called, it does not reset the dropped_count
so that subsequent runs will have incorrect reporting.
- Add NULL check for mmio_trace_array in logging functions
The functions __trace_mmiotrace_rw() and __trace_mmiotrace_map() may
have the 'tr' variable passed to it as NULL. But they both
dereference it without checking if it is NULL first.
- Check return value of __register_event() in trace_module_add_events()
If __register_event() fails, the __add_event_to_tracers() call after
it will create a file for it. If the module fails to load and its
memory is freed, the file will still point to it and it will not be
removed as the registering of the event did not complete.
Only call __add_event_to_tracers() if the __register_event() was
successful.
- Fix false positive match in regex_match_full()
The regex full matching uses a strncmp() to test against the match
string and the value. It should not match if value is a prefix of the
string to match. Check to make sure the length of the strings match
before comparing.
- Fix reader page read offset for remote buffers
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data.
- Fix memory leak of subbuf_ids in rb_allocate_cpu_buffer()
Remote buffers allocate a subbuf_ids array. If the allocator function
fails after it is allocated, it does not free it, resulting in a
memory leak.
* tag 'trace-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix subbuf_ids memory leak in rb_allocate_cpu_buffer() error path
ring-buffer: Fix reader page read offset for remote buffers
tracing/filters: Fix false positive match in regex_match_full()
tracing: Check return value of __register_event() in trace_module_add_events()
tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions
tracing/mmiotrace: Reset dropped_count in mmio_reset_data()
Linus Torvalds [Sat, 1 Aug 2026 00:47:48 +0000 (17:47 -0700)]
Merge tag 'ntfs-for-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs fixes from Namjae Jeon:
- Keep RECALL_ON_OPEN in inode flags when reloading them from
$FILE_NAME
- Check runlist reallocation sizes for negative values and overflow
- Drop stale page cache after shrinking non-resident attributes to
prevent writeback failures and data loss
* tag 'ntfs-for-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: drop stale page-cache when shrinking a non-resident attr
ntfs: harden runlist realloc size calculations
ntfs: preserve RECALL_ON_OPEN on WSL special-file reparse points
Linus Torvalds [Sat, 1 Aug 2026 00:35:17 +0000 (17:35 -0700)]
Merge tag 'v7.2-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Use memcmp() when comparing fixed-size binary ClientGUIDs, so
embedded NUL bytes are handled correctly
- Reject repeated SMB2 NEGOTIATE requests after dialect selection
This prevents preauth_info leaks, enforces the SMB2 protocol
requirements, and serializes negotiation state updates.
- Fix a use-after-free in __close_file_table_ids() by removing the
volatile file ID from the owning IDR before dropping the IDR
reference
* tag 'v7.2-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use memcmp() to compare ClientGUIDs
ksmbd: reject repeated SMB2 NEGOTIATE requests
ksmbd: fix use-after-free in __close_file_table_ids()
- Fix libata header file to remove a kernel doc compilation warning
(Randy)
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt)
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me)
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas)
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas)
* tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: fix ata_scsi_lpm_supported() iteration
ata: libata-core: Disable LPM on WD Green 2.5 480GB
ata: libata-core: Disable LPM on some WD drives
scsi: libsas: terminate deferred commands on time out
ata: libata-scsi: schedule deferred atapi command
ata: libata-scsi: terminate deferred commands on time out
ata: libata-eh: Increase STANDBY IMMEDIATE timeout
ata: libata: avoid kernel-doc warnings
ata: ahci_ceva: fix error paths in ceva_ahci_platform_enable_resources()
ata: sata_mv: accept 1 or 2 resources in platform probe
ring-buffer: Fix subbuf_ids memory leak in rb_allocate_cpu_buffer() error path
In rb_allocate_cpu_buffer(), cpu_buffer->subbuf_ids is allocated using
kcalloc() when buffer->remote is non-NULL. If a subsequent page allocation
fails (e.g., ring_buffer_desc_page() returns NULL or rb_allocate_pages()
fails), execution jumps to fail_free_reader.
While __free(kfree) automatically frees the outer cpu_buffer structure
at scope exit, kfree(cpu_buffer) does not recursively free nested heap
pointers such as cpu_buffer->subbuf_ids, resulting in a memory leak.
Fix this by explicitly freeing cpu_buffer->subbuf_ids in the
fail_free_reader error unwinding path when cpu_buffer->remote is set.
Merge tag 'block-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- A set of fixes for s390/dasd, via Stefan
- Fix for a missing stop of the timeout timer, if a disk has never been
added
- Clear kernel owned fields on ublk setup by default
* tag 'block-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
s390/dasd: Fix undersized format-check buffer
s390/dasd: Fix potential NULL pointer dereference
s390/dasd: Fix path verification interrupted by concurrent dasd_sleep_on_immediatly
block: stop the timeout timer when releasing a never added disk
ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev()
Merge tag 'io_uring-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a bug in how length caps are handled in multishot, and along
with it, a generic fix for avoiding these kinds of conversion issues
in the future.
- Ensure that task restrictions are always preserved across exec.
- Revert of the io_uring controlled epoll restriction, which disallowed
nested contexts. Turns out that libuv is already using it like that,
so we cannot simply remove it, sadly.
- Fix for a reference leak in the zcrx code.
* tag 'io_uring-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: preserve task restrictions across exec
io_uring/zcrx: don't clear master_ctx from the import path
Revert "io_uring/epoll: disallow adding an epoll file to an epoll context"
io_uring/kbuf: cap buffer selection length at MAX_RW_COUNT
io_uring/net: initialize mshot_len for send
Merge tag 'drm-fixes-2026-08-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly pulls request. As expected there is more AMD this week since
Alex was off last week, vmwgfx looks to have been hit with the AI
stick a bit and mediatek as well. Otherwise some minor fixes across
the board, the new normal definitely seems to be a thing.
dp:
- Restrict some DP bandwidth calculations to HDMI DFP
bridge:
- Fix small leak in bridge/display-connector
mediatek:
- Check CRTC state before freeing
- mtk_hdmi: Fix DDC adapter double put in v2
- mtk_hdmi_common: take i2c adapter module reference
- mtk_dsi: Enable HS clock only at pre-enable
- ovl_adaptor: balance component registrations
amdgpu:
- VCN 5.3 fix
- UserQ fixes
- GEM close optimization
- HDMI AV mute fix
- UML build fixes
- GFXOFF residency metrics fixes
- SMU 15 fixes
- debug_vm fix
- PSP 15 fixes
- NBIO 7.11.5 fix
- pptable use after free fix
- gpu metrics fetch fix
- DC viewport fix
- DML2.1 fix
- i2c retimer spam fix
- UMD profile pstate fix
- Power metrics format cleanup
- GTT size fix on APUs
- DC context logging fix
- PM sysfs fix for APUs
- Follow on pageflip timeout fix
amdkfd:
- Various bounds checking fixes
- Mutex locking fix
i915/xe:
- Check no-DMA huge-pte cases before DMA segment test
- sink FRL rate fix
- 200ms fix for TMDS scrambler status
vmwgfx:
- Improve various size checks and limit checks
- Fix oops when submitting invalid execbuf ioctl
- Correctly lock in vmfwgx fence signaling path
- More validation of execbuf ioctl
- Fix oops in vmwgfx vkms init failure path
- Overflow handling in shader path
panthor:
- Improve firmware validation
imagination:
- Improve imagination trace points.
qaic:
- Fix QAIC transaction length check"
* tag 'drm-fixes-2026-08-01' of https://gitlab.freedesktop.org/drm/kernel: (59 commits)
drm/i915/hdmi: Poll for 200 msec for TMDS_Scrambler_Status
drm/amd/display: Exit idle optimizations before programming
drm/amd/pm: hide pp_table sysfs on APUs
accel/qaic: use sizeof(*trans_hdr) for transaction length check
drm/panthor: validate firmware interface structure sizes
drm/xe/pt: check no-DMA huge-pte cases before DMA segment test
drm/imagination: Update the trace point pvr_job_submit_fw()
drm/i915/dp: Ignore the sink's DSC max FRL rate without a PCON DSC encoder
drm/mediatek: ovl_adaptor: balance component registrations
drm/mediatek: mtk_dsi: Enable HS clock only at pre-enable
drm/dp: Read the PCON max FRL bandwidth only for HDMI DFPs
drm/amd/display: use proper context for logging
drm/amdgpu: cap GTT size to physical RAM on APUs
drm/amd/pm: use milliwatts for GPU power sensors
drm/amdgpu: restore UMD profile pstate after runtime resume
drm/amd/display: Silence link_dpms I2C retimer failures
drm/amdkfd: hold event_mutex while checkpointing CRIU events
drm/amd/display: check if dml21_add_phantom_plane() is successful
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
drm/amd/display: Add AV mute wait frames to dce110_set_avmute
...
Merge tag 'devicetree-fixes-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix NULL bus dereference in of_pci_range_parser_one()
- Prevent out-of-bounds access when too many dynamic reserved memory
regions are defined
* tag 'devicetree-fixes-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/address: Fix NULL bus dereference in of_pci_range_parser_one()
of: reserved_mem: prevent OOB when too many dynamic regions are defined
Merge tag 'hyperv-fixes-signed-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyper-v fixes from Wei Liu:
- Multiple fixes for the MSHV driver (Stanislav Kinsburskii, Wei Liu,
Yi Xie, Yousef Alhouseen)
- Multiple fixes for the VMBus driver (Hardik Garg, Michael Kelley,
Sebastian Andrzej Siewior)
* tag 'hyperv-fixes-signed-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv_vtl: bounds-check cpu index in vtl mmap fault handler
mshv: Publish VP to pt_vp_array before installing the file descriptor
Drivers: hv: vmbus: add VTL2 redirect connection ID
mshv: Order pt_vp_array publish against irqfd assertion path
mshv: Fix missing error code on VP allocation failure
mshv: Fix level-triggered check on uninitialized data
mshv: Fix race in mshv_irqfd_deassign
mshv: Use kfree_rcu in mshv_portid_free
mshv: Fix sleeping under spinlock in mshv_portid_alloc
mshv: Fix duplicate GSI detection for GSI 0
Drivers: hv: vmbus: Remove vmbus_irq_initialized
Drivers: hv: vmbus: Replace lockdep_hardirq_threaded() with lockdep annotation
mshv_vtl: fix fd leak in mshv_ioctl_create_vtl()
mshv_vtl: clear hypercall output before copyout
Drivers: hv: vmbus: Set DMA coherent mask for VMBus devices
mshv: fix hv_input_get_system_property struct
Merge tag 'trace-tools-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull RTLA fix from Steven Rostedt:
- Fix timerlat top actions triggering on signal
Fix a bug in RTLA's timerlat top actions feature where on-threshold
actions are triggered on any signal, regardless of whether a latency
spike had actually occurred during the measurement.
The return retval was checked for non-zero to do actions. But if a
signal came in, it returns a negative and actions were being
incorrectly triggered when they should not have been.
* tag 'trace-tools-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat_top: Fix on-threshold actions firing on signal
mshv: Publish VP to pt_vp_array before installing the file descriptor
mshv_partition_ioctl_create_vp() called anon_inode_getfd() before
publishing the new VP into partition->pt_vp_array. anon_inode_getfd()
includes fd_install(), so the fd was live in current->files before the
publish ran.
A concurrent MSHV_RUN_VP ioctl on that fd does not serialise against the
in-progress MSHV_CREATE_VP — it takes vp->vp_mutex, not the partition
mutex. Once the VP starts running and traps, mshv_intercept_isr() can look
up partition->pt_vp_array[vp_index] and observe NULL, silently dropping the
intercept message.
Split the fd creation: reserve an fd with get_unused_fd_flags(), create the
file with anon_inode_getfile(), publish the VP via smp_store_release(), and
finally call fd_install() as the userspace-visibility commit point.
Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
Drivers: hv: vmbus: add VTL2 redirect connection ID
VMBus sends CHANNELMSG_INITIATE_CONTACT through a Hyper-V message
connection ID. Older protocol versions use VMBUS_MESSAGE_CONNECTION_ID,
while protocol version 5.0 and newer normally use
VMBUS_MESSAGE_CONNECTION_ID_4.
For a VTL2 kernel using VMBus protocol 5.0 or newer, the host
may expect INITIATE_CONTACT on either the redirect connection ID or
VMBUS_MESSAGE_CONNECTION_ID_4. There is no capability indication that
identifies which ID is active, so the driver must determine it at runtime.
During VMBus negotiation, the redirect ID is tried first because it is
used by VTL2 configurations with VMBus redirection enabled. If the
redirect ID is unavailable, the host rejects it synchronously with
HV_STATUS_INVALID_CONNECTION_ID, allowing fallback to the standard ID.
Return a distinct error for an invalid Initiate Contact connection ID so
this fallback does not mask other post-message failures or
protocol-version rejections. Preserve the existing connection ID
selection for older protocol versions or when running below VTL2.
Signed-off-by: Hardik Garg <hargar@linux.microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv: Order pt_vp_array publish against irqfd assertion path
mshv_partition_ioctl_create_vp() initialises a VP struct (allocations,
mutex_init, init_waitqueue_head, page mappings) and then publishes the
pointer into partition->pt_vp_array. Several ISR paths read this array
locklessly: the intercept ISR, the two scheduler ISRs, and
mshv_try_assert_irq_fast() on the irqfd fast path.
Of these, only mshv_try_assert_irq_fast() can structurally race the
publish. It runs from an eventfd waker without holding pt_mutex, and
MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to
refer to an existing VP at registration time. A user can therefore
register an irqfd targeting a yet-to-be-created VP, then trigger
mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the
same index. On weakly-ordered architectures the reader can observe a
non-NULL pointer in pt_vp_array before the initialising stores to the
VP struct become visible, leading to use of partially-initialised
fields (e.g. vp_register_page).
The other ISR readers cannot reach this race: the hypervisor will not
generate intercept or scheduler messages for a VP that has never been
told to run, and the user can only call MSHV_RUN_VP on the VP fd
returned by MSHV_CREATE_VP, which by construction is returned after
the publish. Leave those readers as plain loads.
Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish
the pointer, and pair it with smp_load_acquire() in
mshv_try_assert_irq_fast(). On x86 these compile to plain accesses
under TSO; on ARM64 they emit one-instruction acquire/release barriers,
acceptable on this fast path.
The destroy-side path (destroy_partition() clearing pt_vp_array[i] to
NULL after kfree(vp)) has a separate ordering and lifetime concern
that is out of scope here.
Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv: Fix missing error code on VP allocation failure
In mshv_partition_ioctl_create_vp(), when kzalloc for the VP struct
fails, the code jumps to the cleanup path without setting ret. At that
point ret is 0 from the preceding successful mshv_vp_stats_map() call,
so the function returns success to userspace despite having failed to
create the VP. No fd is installed and no VP is registered in pt_vp_array,
but userspace has no way to know the operation failed.
Set ret to -ENOMEM before jumping to the cleanup path.
Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv: Fix level-triggered check on uninitialized data
In mshv_irqfd_assign(), the level-triggered validation for resample
irqfds checks irqfd_lapic_irq.lapic_control.level_triggered before
mshv_irqfd_update() has populated the field. Since the irqfd struct is
zero-allocated, level_triggered is always 0 at that point, causing the
check to always reject resample irqfds with -EINVAL. This makes
level-triggered interrupt resampling — used to avoid interrupt storms
with assigned devices — completely non-functional.
Move the check after the mshv_irqfd_update() call, which resolves the
IRQ routing entry and populates irqfd_lapic_irq with the actual trigger
mode.
Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv_irqfd_deactivate() and the hlist traversal of pt_irqfds_list
require pt->pt_irqfds_lock to be held, but mshv_irqfd_deassign()
omits it. This races with the EPOLLHUP path in mshv_irqfd_wakeup(),
which does take the lock before calling mshv_irqfd_deactivate().
Additionally, mshv_irqfd_deactivate() uses hlist_del() which poisons
the node pointers rather than resetting them. Since
mshv_irqfd_is_active() relies on hlist_unhashed() (checks pprev ==
NULL), a poisoned node still appears active. If a concurrent path calls
mshv_irqfd_deactivate() again on the same irqfd, the guard fails to
prevent a double hlist_del() on poisoned pointers.
Fix both issues:
- Add the missing spin_lock_irq/spin_unlock_irq around the list
traversal in mshv_irqfd_deassign(), matching mshv_irqfd_release().
- Use hlist_del_init() instead of hlist_del() so the node is properly
marked as unhashed after removal, making the is_active guard reliable.
Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv_portid_free() uses synchronize_rcu() followed by kfree() to
reclaim port table entries. This blocks the caller until a full RCU
grace period elapses, which is unnecessary since the same module already
uses the non-blocking kfree_rcu() pattern in mshv_port_table_fini().
Replace with kfree_rcu() to avoid the blocking wait and keep the
reclamation strategy consistent across the file.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
Merge tag 'spi-fix-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The drip of driver specific fixes, mostly from the device vendors
themselves, keeps on coming in. There's more than I'd like right now
but equally nothing hugely alarming"
* tag 'spi-fix-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-nxp-fspi: propagate clock reconfig failures in nxp_fspi_select_mem()
spi: spi-nxp-fspi: enter stop mode before reconfiguring MCR0 and DLL
spi: spi-nxp-fspi: add per-SoC SDR/DTR clock rate limits for all supported SoCs
spi: spi-qpic-snand: write the feature value before executing SET_FEATURE
spi: spi-cadence: Move TX FIFO full busy-wait into FIFO
spi: qcom-qspi: Correct max DMA length to avoid 64K boundary failure
spi: spacemit: prepare both DMA descriptors before submitting
Merge tag 'pci-v7.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Remove Karthikeyan Mitran from Mobiveil MAINTAINERS PCIe entry since
email bounces (Manivannan Sadhasivam)
- Preserve i.MX6Q, i.MX6QP, and i.MX6SX Root Port MSI/MSI-X
Capabilities when using iMSI-RX to work around hardware defect
(Soeren Moch)
- Reorder i.MX6Q/DL PHY power up to fix boot hang regression (Richard
Zhu)
* tag 'pci-v7.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: imx6: Fix i.MX6Q/DL boot hang caused by improper PHY power sequencing
PCI: imx6: Keep i.MX6 Root Port MSI/MSI-X Capabilities with iMSI-RX to work around hardware bug
MAINTAINERS: Drop Karthikeyan Mitran from Mobiveil PCIe entry
Merge tag 'hwmon-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Most of the patches are fixes for pre-existing issues reported by
Sashiko. I suspect we'll see a lot of those for a while.
- adt7470:
- Fix PWM auto temp state array and bounds check
- Fix divide-by-zero TOCTOU crash in fan speed read
- Use cached PWM frequency value
- Fix swapped PWM3 and PWM4 auto mode masks
- Fix temperature alarm logic in hwmon_temp_read()
- Fix busy-loop and I2C flooding in update thread
- Fix cache updated before hardware write on I2C error
- Fix fans stuck in manual mode on I2C errors
- ina2xx: Fix various overflow issues
- ltc4282: Fix reading the minimum alarm voltage
- lm63: Mask PWM frequency multiplier to supported bits
- lm90: Only report alarms if driver is ready
- nct6775-core:
- Prevent access to unsupported weight registers
- Fix number of temperature registers for NCT6116
- npcm750-pwm-fan: stop fan timer on device detach
- nzxt-smart2: DMA-align output buffer
- pmbus:
- Fix return value from pmbus_update_byte_data()
- Notify on the hwmon device, not the i2c client
- sht3x: Fix unaligned accesses"
* tag 'hwmon-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (npcm750-pwm-fan): stop fan timer on device detach
hwmon: (pmbus) Fix return value from pmbus_update_byte_data()
hwmon: (adt7470) Fix PWM auto temp state array and bounds check
hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read
hwmon: (adt7470) Use cached PWM frequency value
hwmon: (adt7470) Fix swapped PWM3 and PWM4 auto mode masks
hwmon: (adt7470) Fix temperature alarm logic in hwmon_temp_read()
hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread
hwmon: (adt7470) Fix cache updated before hardware write on I2C error
hwmon: (adt7470) Fix fans stuck in manual mode on I2C errors
hwmon: (nct6775-core) Prevent access to unsupported weight registers
hwmon: (lm63) Mask PWM frequency multiplier to supported bits
hwmon: (nzxt-smart2) DMA-align output buffer
hwmon: (lm90) Only report alarms if driver is ready
hwmon: (sht3x) Fix unaligned accesses
hwmon: (ltc4282) Fix reading the minimum alarm voltage
hwmon: (ina2xx) Fix various overflow issues
hwmon: (pmbus/core) notify on the hwmon device, not the i2c client
hwmon: (nct6775-core) Fix number of temperature registers for NCT6116
Merge tag 'sound-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of sound fixes for the 7.2-rc6 cycle. Again, it became
far larger than wished; I'll throttle from now on.
There are no major changes, just a normal flow of small fixes. The
majority of them are device-specific quirks and ASoC SDCA/codec
updates, but it includes a few ALSA core fixes as well.
ALSA Core:
- Fix for ALSA sequencer timer division-by-zero
- Fix potential race in ALSA timer core
- Wake up linked drain waiters on PCM stream unlink
- Fix double-free of converter objects on UMP rawmidi error path
USB-audio:
- Fix a few potential out-of-bounds access bugs
- Prevent stack info leak in RME Digiface status
- Fix UAF during UMP endpoint destruction
- Fix UAF at error handling during probe in Line6 6fire driver
- Quirks for C-Media CM6206, Corsair Virtuoso, Razer Barracuda X 2.4,
JKY Technology, and generic USB headphones
HD-audio:
- Quirks for HP Victus 16, HP Dragonfly Folio G3, Lenovo Legion 7, HP
Laptop 14s, Acer Nitro 5, TongFang X6SP45xU, Infinix INBOOK X3, and
HP Pavilion All-in-One
ASoC:
- Comprehensive cleanups and bug fixes for SoundWire/SDCA drivers
- DMI quirks for AMD ACP/YC on Lenovo Legion 7, Acer Aspire, MSI
Crosshair A16, and ASUS ExpertBook
- ACPI match table entry for SOF RT5682 on Intel Nova Lake
- Device-specific mixer / clock, irq fixes for TI TAS2562, TI
TAS2781, Sophgo cv1800b ADC, Maxim MAX98090/98095, FSL ASRC/EASRC
and Realtek RT5640"
* tag 'sound-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
ASoC: rt722: reset codec to fix abnormal sound
ASoC: dt-bindings: realtek,rt5640: Make interrupts optional
ALSA: hda/realtek: Add mute LED quirk for HP Victus 16-e0xxx (MB 88ED)
ALSA: usb-audio: Add GET_SAMPLE_RATE quirk for C-Media CM6206
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
ALSA: usb-audio: Add quirk for Corsair Virtuoso (later revision)
ALSA: pcm: wake linked drain waiters on unlink
ASoC: amd: acp: Add DMI quirk for Lenovo Legion 7 15ASH11
ASoC: sophgo: return 1 on volume change in cv1800b_adc_volume_set()
ASoC: tas2781: Use correct calibration data for SINEGAIN2 register
ASoC: SDCA: Move kcontrol search out of IRQ
ASoC: SDCA: Switch to fixup_controls callback for IRQ registration
ASoC: Add a component fixup_controls callback
ASoC: SDCA: Populate IRQ data earlier
ASoC: SDCA: Remove devm from primary IRQ cleanup
ASoC: SDCA: Add sdca_irq_cleanup_late()
ASoC: SDCA: Rename sdca_irq_allocate() to include devm
ALSA: hda/realtek: Add quirk for HP Dragonfly Folio G3 2-in-1 (103c:8a05)
ALSA:hda/realtek:ALC269 fixup for Legion 7 15ASH11 Mic Mute LED
...
Merge tag 'mm-hotfixes-stable-2026-07-30-19-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 6 are cc:stable. 9 are for MM.
There's a two-patch series from Nico which fixes a couple of PMD level
mTHP accounting bugs and a two-patch series from Chris Gellermann
which addresses mishandling of getline() in selftests. All the
remainder are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-30-19-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: fix potential wild pointer access of getline due to missing init
selftests/clone3: fix wild pointer access of getline due to missing init
mm/page_reporting: use system_freezable_wq to fix UAF during suspend
mm: vmscan: abort proactive reclaim early when freezing for suspend
MAINTAINERS: update Nico Pache's email address
arm64, mailmap: update email address for Peter Collingbourne
MAINTAINERS: update address for Burak Emir
mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios
riscv/mm: use physical alignment for vmemmap_start_pfn
mm/migrate: exclude hugetlb folios from MTHP_STAT_NR_ANON accounting
mm: decrement MTHP_STAT_NR_ANON in free_zone_device_folio()
mm: memcg: initialize *locked in memcg1_oom_prepare() stub
Stefan Haberland [Mon, 27 Jul 2026 14:28:40 +0000 (16:28 +0200)]
s390/dasd: Fix undersized format-check buffer
fmt_buffer_size in dasd_eckd_check_device_format() is declared as
int, even though one of the multiplicands, sizeof(struct eckd_count),
is a size_t. The expression
trkcount * rpt_max * sizeof(struct eckd_count)
is therefore correctly evaluated at 64-bit width, but the result is
silently truncated when it is stored back into the 32-bit
fmt_buffer_size variable. For a sufficiently large track range
(start_unit/stop_unit are caller-controlled) this truncation
yields a buffer size far smaller than the number of tracks actually
requested. kzalloc() then succeeds with an undersized allocation,
while the subsequent channel program build still operates on the
untruncated track count and writes past the end of that buffer.
Compute the buffer size with check_mul_overflow() and keep it in a
size_t, so that a value that no longer fits results in -EINVAL
instead of a silently truncated allocation size.
Fixes: 8fd575200db5 ("s390/dasd: Add new ioctl BIODASDCHECKFMT") Cc: stable@vger.kernel.org #4.7 Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://patch.msgid.link/20260727142840.567286-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stefan Haberland [Mon, 27 Jul 2026 14:28:38 +0000 (16:28 +0200)]
s390/dasd: Fix path verification interrupted by concurrent dasd_sleep_on_immediatly
When all channel paths to a DASD device are lost and subsequently
recovered, the path event handler starts one IO per path via
dasd_sleep_on_immediatly() to execute read configuration data (RCD) with
high priority.
dasd_sleep_on_immediatly() works by terminating the currently running
request before inserting the new request.
If a concurrent caller, such as the attention handler
dasd_eckd_check_attention_work() or the summary unit
check handler summary_unit_check_handling_work(), also calls
dasd_sleep_on_immediatly() while a path verification RCD is in progress,
the RCD gets terminated.
The problem is that a terminated request transitions from CLEARED to
TERMINATED without going through the normal retry path in
__dasd_device_process_ccw_queue.
The RCD therefore returns -EIO, and the affected paths remain
non-operational after recovery. RCD CQRs used for path verification
already carry the DASD_CQR_VERIFY_PATH flag.
Extend _dasd_term_running_cqr() to check this flag: instead of terminating
such a request, return -EAGAIN. In dasd_sleep_on_immediatly(), loop on
-EAGAIN with a short sleep, waiting for the path verification request to
complete before inserting the new request.
This is consistent with the already indefinite wait_event() that
dasd_sleep_on_immediatly() uses for its own request, and all other callers
(attention handler, summary unit check handler, reserve/release/steal-lock)
benefit automatically without requiring changes.
1. Check CRTC state before freeing
2. mtk_hdmi: Fix DDC adapter double put in v2
3. mtk_hdmi_common: take i2c adapter module reference
4. mtk_dsi: Enable HS clock only at pre-enable
5. ovl_adaptor: balance component registrations
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes.
Fixes: f5a544e3bab7 ("ksmbd: add support for SMB3 multichannel") Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Reported-by: Samu <nomomentomori@gmail.com> Suggested-by: Samu <nomomentomori@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Reported-by: Runa Takemoto <takemotoruna223@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd: fix use-after-free in __close_file_table_ids()
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table.
Fixes: 8510a043d334 ("ksmbd: increment reference count of parent fp") Reported-by: Yunseong Kim <yunseong.kim@est.tech> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Several bug fixes found by tools and fuzzing:
- Incorrect domain passed during replace to ack faults
- Block the access API from using dmabuf
- Missing unlock on error unwind
- Race seeing a partially setup vdevice in the xarray
- Do not allow vdevices to have multiple stream ids in SMMUv3
- Possible UAF if racing faults with domain changes"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/iommufd: Fix IOPF group ownership UAF
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd: Reject DMABUF pages from the access pin path
iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace
Merge tag 'audit-pr-20260730' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
- Fix potential integer overflows in audit_log_n_string()
Similar to the earlier fix to audit_log_n_hex() that you merged
earlier in July. Expect a cleaner, and generally better fix for these
functions in an upcoming merge window, but this addresses the problem
in a small patch that should be easy for people to backport.
- Fix potential use-after-free in audit_del_rule()
* tag 'audit-pr-20260730' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential use-after-free in audit_del_rule()
audit: fix potential integer overflow in audit_log_n_string()
Kyumin Lee [Thu, 30 Jul 2026 19:27:34 +0000 (04:27 +0900)]
io_uring: preserve task restrictions across exec
Per-task restrictions apply to all rings created by a task. Once
installed, they should not be dropped across exec.
For a task that has used io_uring, the exec cancellation path calls
__io_uring_free(). This frees both the task context and the per-task
restriction, so a ring created after exec is unrestricted.
Split task context cleanup into io_uring_free_tctx(), and use it from
the exec cancellation path. Keep __io_uring_free() for final task
cleanup, where both the context and restriction are released.
Jerome Tollet [Wed, 20 May 2026 02:25:44 +0000 (07:55 +0530)]
drm/i915/hdmi: Poll for 200 msec for TMDS_Scrambler_Status
HDMI 2.0 section 6.1.3.1 specifies that after enabling
Scrambling_Enable and starting scrambled video transmission, the source
should poll Scrambling_Status until it reads 1 or until a timeout of
200 ms expires.
Add a polling step after enabling the HDMI port to check the scrambling
status when HDMI scrambling is enabled.
On some HDMI 2.0 sinks, omitting this check can result in 4K@60Hz
(594 MHz) failing to come up correctly because the sink has not yet
finished its scrambling setup. In practice, waiting for the scrambling
status here fixes such sinks.
While this synchronous polling is not itself explicitly required for
correct modeset sequencing, HDMI 2.0 section 6.1.3.1 does recommend it
as the way for the source to verify that the TMDS link is functioning
correctly with scrambling enabled.
v3:
- Add explicit HDMI 2.0 section reference in code comment
- Clarify commit message around the observed sink fix
v2:
- Poll TMDS_Scrambler_Status for up to 200 ms instead of using a fixed
delay
io_uring/zcrx: don't clear master_ctx from the import path
import_zcrx() attaches an existing ifq to another ring. It never calls
zcrx_set_ring_ctx() and so never takes the ->master_ctx reference, but
its error path still passes @ctx to zcrx_unregister(), which clears
->master_ctx and drops its percpu_ref whenever ifq->master_ctx == ctx.
That condition is reachable. A ring that registers an ifq with a
non-zero event type_mask gets ->master_ctx pointed at itself, and
nothing stops it from exporting that ifq with ZCRX_CTRL_EXPORT and
importing the resulting fd back into the same ring. Failing the import
after the refcount bumps -- an argument page mapped PROT_READ makes the
copy_to_user() in import_zcrx() return -EFAULT -- then clears the
->master_ctx owned by the original registration, which is still live.
Refcounts stay balanced and nothing is freed early, so there is no
splat. The ring silently stops receiving ZCRX_EVENT_ALLOC_FAIL and
ZCRX_EVENT_COPY: zcrx_send_notif() returns early on a NULL
->master_ctx, and ->master_ctx is only ever set on a freshly allocated
ifq, so it cannot be restored without tearing the ring down.
Pass NULL instead, matching zcrx_box_release() and the zcrx_export()
error path. io_register_zcrx() only gets away with passing @ctx
because zcrx_set_ring_ctx() runs after its last goto err.
Fixes: 00d91481279f ("io_uring/zcrx: share an ifq between rings") Signed-off-by: Woraphat Khiaodaeng <worapat.kd2@gmail.com> Link: https://patch.msgid.link/20260730162741.1125-1-worapat.kd2@gmail.com Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: add pavel edit] Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'pm-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues related to cpufreq, in the ACPI CPPC library and the
generic CPPC cpufreq driver, in the powernow-k8 and amd-pstate
drivers, and in the schedutil governor:
- Allow fast frequency switching in the ACPI CPPC library only when
every supported control used by the driver callback has an address
space already accepted for fast access (Christian Loehle)
- Skip writes to unsupported performance controls in the ACPI CPPC
library (Christian Loehle)
- Update cppc_cpufreq_update_perf_limits() to read policy->min and
policy->max once and, if the lockless snapshot is inconsistent,
reduce the minimum to the observed maximum, along the lines of
cpufreq_driver_resolve_freq() (Christian Loehle)
- Fix a possible memory leak in the powernowk8_cpu_init() error paths
(Abdun Nihaal)
- Loosen the requirement on lowest nonlinear frequency != min freq in
the amd-pstate driver that is too tight for new systems some of
which actually have the lowest nonlinear frequency identical to the
minimum frequency (Mario Limonciello)
- Prevent amd-pstate from loading on unsupported hardware (Rong
Zhang)
- Address an initialization race in the schedutil governor when it
runs on multi-CPU cpufreq policies, by making it initialize all
per-CPU structures first and only then publish the per-CPU
utilization update hooks (Zhongqiu Han)"
* tag 'pm-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: powernow-k8: Fix possible memory leak in powernowk8_cpu_init()
ACPI: CPPC: Skip writes to unsupported performance controls
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
cpufreq: schedutil: Publish util hooks only after all sg_cpu are initialized
cpufreq: cppc: Sanitize lockless policy limit snapshots
ACPI: CPPC: Check all controls for fast switching
Revert "io_uring/epoll: disallow adding an epoll file to an epoll context"
Turns out that my naive assumption that surely nobody is using io_uring
to manage nested epoll instances was wrong - libuv is in fact doing that
very thing. Since we have users in the wild using that feature, we
cannot remove it from upstream. Revert the commit that introduced that
limitation.
io_uring/kbuf: cap buffer selection length at MAX_RW_COUNT
io_ring_buffers_peek() builds an iovec array from provided buffers, and
that in turn can be handed off to a lower level provider. Be prudent and
cap the total size to MAX_RW_COUNT, which is the Linux default for how
much IO do to in a single call.
No bugs here, but it's a good preventative measure to avoid truncation
issues.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
changed how io_mshot_prep_retry() set sr->len, and added the same
initialization in io_mshot_prep_retry(). But it neglected to touch the
send path, which may also uses the mshot retry path. Ensure that
sr->mshot_len always gets initialized correctly.
Merge tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again larger than usual: the backlog accumulated in the past weeks
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
- eth:
- idpf: bound interrupt-vector register fill to the allocated array"
* tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (156 commits)
qede: sync udp_tunnel ports outside qede_lock in the recovery path
net: openvswitch: fix potential UAF on meter attach failure
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
net: libwx: fix FDIR ATR queue mismatch for software VLAN packets
net: dsa: realtek: use devm_mutex_init for l2_lock
net: dsa: realtek: use devm_mutex_init for vlan_lock
net: dsa: realtek: use devm_mutex_init for regmap lock
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
net: mana: Return error code from mana_create_rxq()
net: openvswitch: fix skb leak on flow key update failure during ct
net: openvswitch: fix skb leak on flow key update failure during recirculation
net: stmmac: Fix E2E delay mechanism
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"
Revert "vhost-net: wake queue of tun/tap after ptr_ring consume"
Revert "ptr_ring: move free-space check into separate helper"
Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
...
Merge tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in
gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
* tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pch: use raw_spinlock_t for the register lock
gpio: pca953x: fix cache_only and IRQ state on restore_context() failure
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
gpiolib: tolerate gpio-hogs lacking a hogging state
gpio: sloppy-logic-analyzer: Fix memory leak in gpio_la_poll_probe()
Merge tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970
platform
- fix exit_flags field placement in pt_regs for ptrace
- fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Michael Ellerman demotes himself to reviewer
- misc fixes and cleanup
Thanks to Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira
Rajeev, Christophe Leroy (CS GROUP), Dmitry V. Levin, Geert
Uytterhoeven, John Ogness, Michael Ellerman, Mukesh Kumar Chaurasiya
(IBM), Ritesh Harjani (IBM), Thorsten Blum, and Vaibhav Jain
* tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
MAINTAINERS: Demote myself to reviewer
powerpc/serial: Fix include guard comment
powerpc/perf: Use strstarts() to simplify is_thread_imc_pmu()
powerpc/ps3: Fix map failure path in dma_ioc0_map_pages()
powerpc/ps3: Remove unused struct table in setup_areas()
powerpc/boot: Fix treeboot-akebono CPU node lookup check
powerpc/boot: Fix treeboot-currituck CPU node lookup check
powerpc/boot: Fix simpleboot CPU node lookup check
powerpc: Fix exit_flags field placement in pt_regs for ptrace
powerpc/970: fix nap return address corruption on async interrupt exit
powerpc/pseries: Skip vpa_init() for boot cpu in smp_setup_cpu()
powerpc/pseries: Ensure vpa,slb_shadow & dtl are unregistered during crash
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them.
Fixes: 8cd160a29415 ("qede: convert to new udp_tunnel_nic infra") Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Andrew Lunn <andrew+netdev@lunn.ch> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260726104311.1782900-1-den@openvz.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 30 Jul 2026 13:09:28 +0000 (15:09 +0200)]
Merge tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-29
this is a pull request of 20 patches for net/main.
The first 2 patches fix problems in the CAN J1939 protocol and are by
Tetsuo Handa and Oleksij Rempel.
The next 2 patches fix problems in the CAN ISOTP protocol and are by
Oliver Hartkopp and Minhong He.
Avi Weiss contributes contributed 4 fixes for the ctucanfd, Pengpeng
Hou's patch adds a missing MODULE_DEVICE_TABLE.
The patches for the peak_usb driver are contributed by James Gao,
Maoyi Xie, Maoyi Xie and add sanity checks for the USB bulk data
parsing and fix a double free.
2 fixes for the kvaser_usb driver are provided by Abdun Nihaal and
Pengpeng Hou, a mem leak is fixed and sanity checks for the USB bulk
data parsing.
Tu Nguyen's patch for the rcar_canfd driver fixes the initializing
flow.
Pengpeng Hou contributes a patch for the softing driver to validate
the firmware record spans.
Lucas Martins Alves's patch for the c_can driver keeps the controller
in init mode until configuration is complete.
A patch by my add missing URB resubmission on skb allocation failure
to the gs_usb driver.
Guangshuo Li's patch for the etas_es58x driver fixes a RX buffer leak.
The last patch is by Pengpeng Hou and adds sanity checks to the USB
bulk data parsing of the ems_usb driver.
Patch 1 introduce per-SoC clock rate limits for both SDR and DTR modes
by adding max_sdr_rate and max_dtr_rate to nxp_fspi_devtype_data.
Patch 2 enter stop mode before reconfiguring MCR0 and DLL to follow
FlexSPI reference manual initialization sequence
Patch 3 propagate clock reconfig failures in nxp_fspi_select_mem()
spi: spi-nxp-fspi: propagate clock reconfig failures in nxp_fspi_select_mem()
nxp_fspi_select_mem() disables the FlexSPI clocks before calling
clk_set_rate() and re-enabling them. If clk_set_rate() or the clock
re-enable fails, the function returned early (as void) leaving both the
serial root clock and the register interface clock disabled.
As the function returned void, nxp_fspi_exec_op() had no way to know
about the failure and continued to access FlexSPI registers (LUT setup,
data transfer, AHB buffer invalidation). Accessing the controller
registers while its clock is gated off results in a synchronous external
abort.
Make nxp_fspi_select_mem() return an error code and have
nxp_fspi_exec_op() bail out on failure before any further register
access, including nxp_fspi_invalid().
spi: spi-nxp-fspi: enter stop mode before reconfiguring MCR0 and DLL
In nxp_fspi_select_mem() the RX sample clock source (MCR0[RXCLKSRC])
and the DLL control registers (DLLxCR) are reconfigured while the
FlexSPI module is still enabled. According to the FlexSPI reference
manual initialization sequence, MCR0 and the DLL control registers
should be programmed while the module is in stop mode, i.e. with
MCR0[MDIS] set to 1, and the module re-enabled (MCR0[MDIS] = 0)
afterwards.
Wrap the RX sample clock source selection and the DLL calibration/
override reconfiguration in a stop-mode window to align with the RM
and avoid reconfiguring timing-critical registers while the module is
active.
spi: spi-nxp-fspi: add per-SoC SDR/DTR clock rate limits for all supported SoCs
The commit f43579ef3500 ("spi: spi-nxp-fspi: limit the clock rate for
different sample clock source selection") introduced a global 166MHz
cap for DTR mode (RXCLKSRC=3), based on the i.MX8MN datasheet timing
specification (Section 3.9.9, page 65).
After reviewing the FlexSPI timing parameters in the datasheets for all
supported SoCs, the following corrections and additions are needed:
Merge tag 'asoc-fix-v7.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
This is a relatively large set of updates, the biggest batch of things
is Charles' fixes for the SDCA code which have been through a number of
iterations on the list and deal with a bunch of issues that have been
seen as we get more real world usage of SDCA. We also have the usual
device specific fix and quirk traffic that we tend to see, there's a
small pile of fixes for the tas2562 driver since I saw some bugs while
reviewing fixes sent by Haidar Lee but it's nothing too remarkable.
net: openvswitch: fix potential UAF on meter attach failure
While attaching a newly created meter attach_meter() function makes
the new meter visible to other CPUs but can still fail afterwards.
On failure, it detaches the meter back and returns an error.
However, this is an unexpected behavior for the ovs_meter_cmd_set()
that uses a plain kfree(meter) on attach failure without waiting for
RCU readers to stop using it, assuming it was never visible.
This is never a problem for ovs-vswitchd as it always creates meters
before creating any flows that use them. But the UAF can be triggered
with a custom application using uAPI:
BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653)
Read of size 8 at addr ffff88810d152650 by task meter/2508
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
During link down event, we were doing netif_tx_stop_all_queues() first
and then netif_carrier_off(). This can cause a potential race since
carrier is still on during down event. This patch reverse the calling
order to fix the issue.
Fixes: 50fe6c02e5ad ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260724072831.2415281-1-rkannoth@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When TX VLAN hardware offload is disabled, VLAN tags are embedded in
the packet payload (software VLAN). Previously, the driver failed to
set the WX_TX_FLAGS_SW_VLAN flag for these packets during transmission.
This missing flag caused the txgbe FDIR ATR logic to fall through to the
default hash calculation path. This resulted in asymmetric hash values
for Tx and Rx flows, preventing return packets from being steered to the
same queue as the transmit packets.
Fix this by detecting software VLANs via eth_type_vlan(skb->protocol)
and setting WX_TX_FLAGS_SW_VLAN. This ensures the ATR feature selects
the correct hashing algorithm to maintain Tx/Rx queue symmetry.
====================
net: dsa: realtek: use devm_mutex_init
This series fixes mutex teardown in the Realtek DSA drivers.
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() must be called before
the mutex is discarded. Using devm_mutex_init() lets the driver core
handle that automatically.
The changes are split into individual commits based on the feature that
introduced each lock to allow proper backports to stable trees.
====================
net: dsa: realtek: use devm_mutex_init for l2_lock
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
net: dsa: realtek: use devm_mutex_init for vlan_lock
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
net: dsa: realtek: use devm_mutex_init for regmap lock
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
In netc_timer_remove(), hardware interrupts are disabled by clearing
TMR_TEMASK before ptp_clock_unregister() is called. This may cause a
race condition during driver unbind that could leave hardware interrupts
active. For example, a concurrent PTP_CLK_REQ_EXTTS ioctl can re-enable
TMR_TEMASK after it has been cleared, leaving a pending hardware
interrupt when the driver unbinds.
Since the NETC Timer does not support PCIe FLR, hardware state is not
reset during probe. When the driver is rebound and the IRQ is registered,
the pending interrupt fires immediately. At that point priv->tmr_emask
is still zero, so netc_timer_isr() does not clear the interrupt status
and unconditionally returns IRQ_HANDLED, resulting in an uninterruptible
infinite interrupt storm.
Fix this in several ways. First, request the IRQ with IRQF_NO_AUTOEN so
it is not enabled when request_irq() runs, and clear TMR_TEMASK in
netc_timer_init() before enabling it. The IRQ is only enabled at the end
of probe once the timer has been reprogrammed and the PTP clock has been
registered. This ensures a stale pending interrupt from a previous unbind
or an unclean shutdown cannot be delivered before the driver is fully
initialized.
Second, in netc_timer_remove() call disable_irq() before
ptp_clock_unregister() and move the TMR_TEMASK/TMR_CTRL clearing after
it. disable_irq() masks the line and waits for any in-flight
netc_timer_isr() to finish, so no ISR can dereference priv->clock after
ptp_clock_unregister() has freed it. Unregistering the PTP clock before
clearing the mask also guarantees that no in-flight or concurrent ioctl
can re-enable hardware interrupts.
Finally, return IRQ_NONE from netc_timer_isr() when the masked event
status is zero, so the kernel's spurious interrupt detection can disable
a stuck line instead of looping forever.
net: mana: Return error code from mana_create_rxq()
mana_create_rxq() returns a struct mana_rxq pointer and returns NULL on
any failure. The caller, mana_add_rx_queues(), cannot tell what went
wrong and hardcodes the error as -ENOMEM. As a result the actual failure
reported by the lower layers (for example -EPROTO from a failed HW
request) is masked and every RX queue creation failure looks like an
out-of-memory error.
Return an ERR_PTR() encoded error code from mana_create_rxq() on failure
instead of NULL. The caller now propagates the returned error code
directly instead of substituting -ENOMEM.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20260727113759.2881500-1-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes for two issues reported by Sashiko while reviewing other patches.
The root cause is the same, fixes and the Fixes are slightly different,
so two separate patches.
====================
net: openvswitch: fix skb leak on flow key update failure during ct
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
Fixes: ec0d043d05e6 ("openvswitch: Ensure flow is valid before executing ct") Cc: stable@vger.kernel.org Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20260727181851.306076-3-i.maximets@ovn.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: openvswitch: fix skb leak on flow key update failure during recirculation
do_execute_actions() returns right away when execute_recirc() fails on
the last action as it assumes this function always takes ownership of
the skb when 'last' is true. But when the flow key update fails, the
function doesn't free the skb and it ends up leaked.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Nazim Amirul [Tue, 28 Jul 2026 06:09:04 +0000 (23:09 -0700)]
net: stmmac: Fix E2E delay mechanism
For E2E delay mechanism, "received DELAY_REQ without timestamp" error
messages show up for dwmac v3.70+ and dwxgmac IPs.
This issue affects socfpga platforms, Agilex7 (dwmac 3.70) and
Agilex5 (dwxgmac). According to the databook, to enable timestamping
for all events, the SNAPTYPSEL bits in the MAC_Timestamp_Control
register must be set to 2'b01, and the TSEVNTENA bit must be cleared
to 0'b0.
Commit 3cb958027cb8 ("net: stmmac: Fix E2E delay mechanism") already
addresses this problem for all dwmacs above version v4.10. However,
same holds true for v3.70 and above, as well as for dwxgmac. Updates
the check accordingly.
Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Fixes: 3cb958027cb8 ("net: stmmac: Fix E2E delay mechanism") Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com> Link: https://patch.msgid.link/20260728060904.31993-1-muhammad.nazim.amirul.nazle.asmade@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While working on a register access cleanup for the mt7530 driver, the
Sashiko AI reviewers flagged long-standing error handling gaps in the
driver's read paths [1].
The MDIO regmap backend truncates negative bus->read() errnos into u16
register halves and returns success, handing garbage data to callers
and to read-modify-write cycles which then write it back to the switch.
The ATC/VTCR command polls and the MT7531 indirect PHY polls consume
reads through a helper which returns 0 when the underlying read fails.
A failed bus transaction thus clears the polled busy bit and is
mistaken for command completion, defeats the subsequent
ATC_INVALID/VTCR_INVALID checks the same way, and lets the indirect
PHY access functions return garbage PHY register data.
Fix the backend to propagate bus->read() errors, and convert the
command and PHY access polls to regmap_read_poll_timeout(), which
terminates polling on read errors and propagates them.
The cleanup series depending on these fixes will be submitted to
net-next separately after the next net/net-next merger.
Daniel Golle [Tue, 28 Jul 2026 04:52:29 +0000 (05:52 +0100)]
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
The MT7531 indirect PHY access functions poll MT7531_PHY_IAC through
a helper which returns 0 when the underlying read fails, so a failed
bus transaction clears MT7531_PHY_ACS_ST and the access carries on,
returning garbage PHY register data to phylib.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them. These functions hold the MDIO bus lock across the
whole sequence, so the unlocked regmap accesses remain correct. Remove
the now-unused _mt7530_unlocked_read().
Daniel Golle [Tue, 28 Jul 2026 04:52:21 +0000 (05:52 +0100)]
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
mt7530_fdb_cmd() and mt7530_vlan_cmd() poll the command register
through a helper which returns 0 when the underlying read fails. A
failed bus transaction thus clears ATC_BUSY/VTCR_BUSY and is treated
as successful command completion, and the subsequent ATC_INVALID and
VTCR_INVALID checks are defeated the same way.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them, and check the completion status read as well. Take
the MDIO bus lock across the sequence as the switch regmap is set up
with locking disabled.
Daniel Golle [Tue, 28 Jul 2026 04:52:14 +0000 (05:52 +0100)]
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
bus->read() returns a negative errno on failure, but
mt7530_regmap_read() assigns it to a u16, truncating e.g. -ETIMEDOUT
into 0xff92, and returns success. The garbage word is then consumed as
register data, and read-modify-write cycles write it back to the
switch. Check both reads and propagate their errors.
The same defect existed in mt7530_mii_read() since the driver was
introduced and moved into the regmap backend unchanged.
====================
Revert "tun/tap & vhost-net: apply qdisc backpressure on full ptr_ring to reduce TX drops"
Commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop when
a qdisc is present") did not show a relevant performance regression in my
testing, but on Brett Sheffield's librecast testbed it causes a
significant throughput drop in an IPv6 multicast testcase. The regression
can be pinpointed to multiple iperf3 TCP threads sending: for 8 threads
the throughput dropped from 13.5 Gbit/s to 9.13 Gbit/s.
Therefore this series reverts the qdisc backpressure work.
Making the backpressure opt-in via a new IFF_BACKPRESSURE flag was
proposed in [1], but a new IFF_* flag needs more review scrutiny than is
available at the moment, so a revert was requested instead. The opt-in
will be resubmitted for net-next later.
__ptr_ring_check_produce() has no users left after reverting
commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
The commit stops the netdev queue when the ptr_ring is full instead of
dropping the packet. My own tests showed no relevant regression, but on
Brett Sheffield's librecast testbed an IPv6 multicast testcase got
slower. With 8 iperf3 TCP threads sending, the throughput dropped from
13.5 Gbit/s to 9.13 Gbit/s.
Reported-by: Brett Sheffield <brett@librecast.net> Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/ Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20260728092240.250257-2-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 30 Jul 2026 00:07:49 +0000 (17:07 -0700)]
Merge tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Much quieter, thankfully:
- a set of ath12k fixes, including a recent
MLO regression for WCN7850/QCC2072
- iwlegacy gets rid of a BUG_ON that triggered
- a couple more robustness/security fixes
* tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlegacy: replace BUG_ON() with WARN_ON() on num_stations check
wifi: mac80211: validate individual TWT params before driver setup
wifi: cfg80211: publish PMSR request before starting the driver
wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
wifi: mac80211: fix tid_tx use-after-free on BA session stop
wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event
wifi: ath12k: defer dp_peer registration when firmware allocates MLD peer ID
wifi: ath12k: do not advertise MLD peer ID for firmware-allocate devices
wifi: ath12k: introduce host_alloc_ml_id hardware parameter
wifi: ath12k: add support for HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP
wifi: ath12k: keep ATH12K_PEER_ML_ID_VALID set in ath12k_sta::ml_peer_id
wifi: ath12k: factor out peer assoc send-and-wait into a helper
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
====================
Merge tag 'probes-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Reject $arg0 during meta-argument expansion to prevent negative index
calculation and out-of-bounds reading of traceprobe parameters
- Roll back on enable_trace_fprobe() failure
Add a rollback cleanup path when __register_trace_fprobe() fails
partway through to unregister registered probes and clear flags or
file links
- Fix module reference count leak on error in register_fprobe()
Ensure the module_put() cleanup loop still runs even when
get_ips_from_filter() returns an error, preventing module
reference count leaks
* tag 'probes-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix module reference count leak on error in register_fprobe()
tracing/fprobe: Roll back on enable_trace_fprobe() failure
tracing/probes: Reject $arg0 in meta argument expansion
The Adaptation Layer Indication parameter contains a fixed 32-bit
Adaptation Code Point after its parameter header. However,
sctp_verify_param() accepts a header-only parameter because the generic
parameter walker only requires the header to be present.
sctp_process_param() then reads adaptation_ind beyond the declared
parameter. When the malformed parameter is last in an INIT, the read
starts at the receive skb tail, and the value is copied into the state
cookie returned in the INIT ACK. This may disclose four receive-buffer
tail bytes.
Require the declared parameter length to match the fixed structure size
and abort the association through the existing invalid parameter length
path otherwise.
MAINTAINERS: make Luiz a maintainer and myself reviewer for Realtek DSA
I have changed jobs and therefore no longer have access to hardware
using Realtek Ethernet switches. Luiz has kindly agreed to take up the
role of maintainer, while I will stick around as a reviewer.
Also update .mailmap so that mails to my old company email stop
bouncing. Use my new work email for Analog Devices Inc. instead.
Shuangpeng Bai [Mon, 27 Jul 2026 18:53:39 +0000 (14:53 -0400)]
ipv6: release fib6_null_entry on subtree failure
When adding a source-specific route creates a new subtree, fib6_add()
installs fib6_null_entry as the temporary leaf of the new subtree root
and takes a fib6_info reference for that holder.
If adding the first source leaf fails, the code frees the just allocated
subtree root but leaves that hold behind. fib6_null_entry is a per-netns
sentinel and is freed directly at netns teardown, so this does not keep
the object alive. However, it leaves its visible refcount permanently
elevated and can eventually saturate the refcount on repeated failures.
Drop the null-entry reference before freeing the unlinked subtree root.
Fixes: 5ea715289af6 ("ipv6: broadly use fib6_info_hold() helper") Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20260727185339.1545169-1-shuangpeng.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kiran Kella [Mon, 27 Jul 2026 10:16:28 +0000 (03:16 -0700)]
psp: fix NULL genl_sock deref race with concurrent netns teardown
The race occurs between network namespace removal and PSP device
unregistration. When a netns is deleted while a PSP device associated
with that netns is concurrently being removed, psp_dev_unregister()
triggers psp_nl_notify_dev() to send a device change notification.
Concurrently, cleanup_net() running in the netns workqueue calls
genl_pernet_exit(), which sets net->genl_sock to NULL. If
genl_pernet_exit() wins the race, two sites in psp_nl_multicast_per_ns()
then dereference the NULL socket and crash:
Fix by replacing the bare dev_net() calls with maybe_get_net().
maybe_get_net() returns NULL if the namespace is already dying.
Holding the reference ensures genl_sock remains valid across both the
build_ntf() and genlmsg_multicast_netns() calls.
Fixes: 00c94ca2b99e ("psp: base PSP device support") Fixes: 06c2dce2d0f6 ("psp: add new netlink cmd for dev-assoc and dev-disassoc") Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com> Signed-off-by: Kiran Kella <kiran.kella@broadcom.com> Link: https://patch.msgid.link/20260727101628.502042-1-kiran.kella@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb()
look up the dmb_node under dmb_ht_lock, drop the lock and only then
operate on the node's refcount. Nothing keeps the node alive across
that window: __dibs_lo_unregister_dmb() removes the node from the hash
table under the write lock and immediately frees it.
A concurrent final put can therefore free the node between the lookup
and the refcount operation:
The same window exists for the refcount_dec_and_test() calls in the
detach and unregister paths.
Close the race structurally by making hash table membership and the
refcount transitions atomic with respect to each other:
- Perform the final refcount_dec_and_test() and hash_del() in a single
dmb_ht_lock write-side critical section, in both the unregister and
the detach path. Freeing the node still happens after the lock is
dropped, which is safe because a node whose refcount reached zero has
left the hash table and can no longer be found.
- This establishes the invariant that any node found in the hash table
holds at least one reference, and that the final reference can only
be dropped under the write lock. dibs_lo_attach_dmb() can thus take
its reference with a plain refcount_inc() while still holding the
read lock; refcount_inc_not_zero() is no longer needed.
__dibs_lo_unregister_dmb() no longer touches the hash table and is
renamed to dibs_lo_free_dmb() accordingly.
Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved
the code to its current location; the race was introduced earlier by
commit c3a910f2380f ("net/smc: implement DMB-merged operations of
loopback-ism").
Tested SMC-D via ISM and dibs loopback.
Cc: stable@vger.kernel.org Fixes: c3a910f2380f ("net/smc: implement DMB-merged operations of loopback-ism") Reported-by: Rahul Chandelkar <rc@rexion.ai> Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20260727093530.968834-1-hidayath@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ring-buffer: Fix reader page read offset for remote buffers
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data. Fix it.
Link: https://patch.msgid.link/20260729133609.4022734-1-vdonnefort@google.com Fixes: fbd1743ecba1 ("ring-buffer: Add non-consuming read for ring-buffer remotes") Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Reviewed-by: Keir Fraser <keirf@google.com> Tested-by: Keir Fraser <keirf@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kbuild: rpm-pkg: Preserve BTF sections in kernel modules during debuginfo stripping
After switching to the kernel's default package scripts for our local
kernel RPM builds, we noticed that module BTF entries were missing:
$ ls /sys/kernel/btf/
vmlinux <<<< only vmlinux, no module BTF
Root cause: find-debuginfo.sh (from the debugedit package) prefers
eu-strip over strip when elfutils is installed, which is the common
case on RHEL 9. eu-strip removes non-allocated ELF sections, including
the .BTF section that contains BPF Type Format information for kernel
modules. Without .BTF, BPF tools (bpftool, bcc, bpftrace) cannot resolve
kernel types at runtime, and /sys/kernel/btf/<module> entries are not
created when modules are loaded.
Additionally, since commit 8646db238997 ("libbpf,bpf: Share BTF
relocate-related code with kernel"), modules contain a .BTF.base section
that maps distilled type IDs to vmlinux types. If .BTF.base is stripped,
btf_parse_module() falls back to vmlinux BTF directly, causing type ID
mismatches and rejecting the module's BTF entirely.
Fix by passing --keep-section .BTF and --keep-section .BTF.base via
_find_debuginfo_opts, which adds -K .BTF and -K .BTF.base to the
eu-strip/strip command, preserving both sections while allowing normal
debuginfo extraction to proceed.
After this change, all module BTF files are properly generated:
Leo Li [Tue, 28 Jul 2026 17:02:47 +0000 (13:02 -0400)]
drm/amd/display: Exit idle optimizations before programming
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Yang Wang [Wed, 29 Jul 2026 07:56:46 +0000 (15:56 +0800)]
drm/amd/pm: hide pp_table sysfs on APUs
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03fe5 ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db69777cd2f059d50fe34e365ddd5add) Cc: stable@vger.kernel.org
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Fix a tiny buglet when propagating the deactivation of an interrupt
from a nested guest, which happened to trigger a gold plated CPU
bug on a particular implementation
- Fix a race between LPI unmapping and mapping, resulting in leaked
LPIs
- Make LPI mapping more robust on memory allocation failure
- Fix the handling of the EL2 tracing clock being disabled
- A couple of Sashiko-driven fixes for corner cases in the EL2
tracing code
- Add missing sysreg tracepoint for the EL2 code
- Tidy-up the mutual exclusion of guest-memfd and MTE
- Update Fuad's email address to point to @linux.dev
s390:
- several fixes for PCI passthru in s390 kvm
- fix a 7.2-rc regression in the adapter interrupt mapping code
x86:
- Add memory clobber to asm for VMX instructions; without one, the
compiler could reorder them in troublesome ways because "asm
volatile" and "asm goto" only protect against removal of the asm.
- Cancel delayed I/O APIC EOI handling before destroying vCPUs
- Check all address spaces (normal and SMM) for write tracking and large
pages, not just the current one.
- Always update x2APIC MSR intercepts for L1 when AVIC is deactivated,
even if not running L1. If the deactivation is VM-wide rather than being
caused by something in L2's vCPU state, after a nested vmexit L1 will
be able to access the host's APIC state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
KVM: x86/mmu: Check all address spaces before skipping unsync
KVM: x86/mmu: Check write tracking in all address spaces
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
KVM: VMX: add memory clobber to asm for VMX instructions
KVM: s390: Fall back to short-term pinning in MAP ioctl
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
KVM: s390: pci: Fix resource leak on IRQ registration failure
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
KVM: s390: pci: Fix missing error codes and memory unaccounting
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
KVM: arm64: Reject guest_memfd memslots when the VM has MTE
KVM: arm64: Add missing hyp_enter when trapping sysreg
KVM: arm64: Fix hyp_trace_desc allocation size in hyp_trace_load()
KVM: arm64: Fix potential leak in hyp_trace_buffer_alloc_bpages_backing
KVM: arm64: Fix hyp_trace clock disabling
KVM: arm64: vgic: Mitigate potential LPI registration failure
KVM: arm64: vgic: Fix race between LPI release and re-registration
KVM: arm64: Update Fuad Tabba's email address
...
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 091abbf578f9 ("KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception") Cc: stable@vger.kernel.org Cc: Yosry Ahmed <yosry@kernel.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Link: https://patch.msgid.link/20260729213558.639074-1-pbonzini@redhat.com/ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Muhammad Bilal [Wed, 17 Jun 2026 21:25:20 +0000 (02:25 +0500)]
accel/qaic: use sizeof(*trans_hdr) for transaction length check
In encode_message() the per-transaction lower-bound check compares
trans_hdr->len against sizeof(trans_hdr), i.e. the size of the pointer,
instead of sizeof(*trans_hdr), the size of struct qaic_manage_trans_hdr.
Every other length check in this file (encode_message() at the loop
guard, decode_message(), etc.) correctly uses sizeof(*trans_hdr), so
this is an inconsistency. On 64-bit builds the pointer and the struct
are both 8 bytes, so the check is correct by coincidence and there is
no behavioural change. On 32-bit builds the pointer is 4 bytes, which
weakens the minimum-length check below the 8-byte header size.
Use sizeof(*trans_hdr) so the check validates against the actual
transaction header size on all builds.
Fixes: ea33cb6fc278 ("accel/qaic: tighten bounds checking in encode_message()") Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Link: https://patch.msgid.link/20260617212520.59801-1-meatuni001@gmail.com
audit: fix potential use-after-free in audit_del_rule()
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed.
Cc: stable@vger.kernel.org Fixes: 34d99af52ad4 ("audit: implement audit by executable") Reported-by: Vega <vega@nebusec.ai> Assisted-by: Codex:gpt-5.4 Signed-off-by: Luxiao Xu <rakukuip@gmail.com> Signed-off-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
projects / thirdparty / linux.git / log
