Dan Williams [Fri, 27 Mar 2026 05:28:13 +0000 (22:28 -0700)]
cxl/region: Fix use-after-free from auto assembly failure
The following crash signature results from region destruction while an
endpoint decoder is staged, but not fully attached.
[ dj: Moved bus_find_device( to next line. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-2-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
Historically DSI PHY bindings landed to the display/msm subdir, however
they describe PHYs and as such they should be in the phy/ subdir.
Follow the example of other Qualcomm display-related PHYs (HDMI, eDP)
and move bindings for the Qualcomm DSI PHYs to the correct subdir.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/709008/ Link: https://lore.kernel.org/r/20260305-msm-dsi-phy-v1-1-0a99ac665995@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The driver references CWB array from SM8650, but should use the Eliza
specific, which has different register space sizes. This should not
have noticeable impact on function but is indeed confusing, since the
Eliza table is used for .cwb_count.
Fixes: 0eb707bbc7fc ("drm/msm/dpu: Add support for Eliza SoC") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/715623/ Link: https://lore.kernel.org/r/20260331161156.211623-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Vladimir Oltean [Fri, 27 Mar 2026 18:46:53 +0000 (20:46 +0200)]
drm/msm/dp: remove debugging prints with internal struct phy state
These do not provide much value, and will become hard to maintain once
the Generic PHY framework starts hiding the contents of struct phy from
consumers.
Due to historical reasons we ended up with dummy values being specified
for MST-related interfaces some of them had INTF_NONE, others had
non-existing DP controller indices. Those workarounds are no longer
necessary. Fix types and indices for all DP-MST related INTF instances.
The only exception is INTF_3 on SC8180X, which has unique design. It can
be used either with INTF_0 / DP0 or with INTF_4 / DP1. This interface is
left with the dummy value until somebody implements necessary bits for
that platform.
Dmitry Baryshkov [Wed, 25 Mar 2026 03:06:06 +0000 (05:06 +0200)]
drm/msm/mdp5: drop workarounds specific to MDP5 1.0
With support for MSM8974v1 being removed from the driver, there is no
need to keep workarounds specific to that particular MDP5 revision. Drop
them, slightly simplifying the logic.
Dmitry Baryshkov [Wed, 25 Mar 2026 02:59:02 +0000 (04:59 +0200)]
drm/msm/mdp5: drop single flush support
Support for using a single CTL for flushing both interfaces was not in
use since the MDP5 driver dropped support for dual DSI configurations in
the commit df3c7899946c ("drm/msm/mdp5: drop split display support").
Having the MDP 3.x support migrated to the DPU driver the single CTL
flush is applicable to the platforms suspproted by the MDP5 driver. Drop
it alltogether.
Corey Hickey [Tue, 31 Mar 2026 21:49:06 +0000 (14:49 -0700)]
hwmon: (asus-ec-sensors) Fix T_Sensor for PRIME X670E-PRO WIFI
On the Asus PRIME X670E-PRO WIFI, the driver reports a constant value of
zero for T_Sensor. On this board, the register for T_Sensor is at a
different address, as found by experimentation and confirmed by
comparison to an independent temperature reading.
* sensor disconnected: -62.0°C
* ambient temperature: +22.0°C
* held between fingers: +30.0°C
Introduce SENSOR_TEMP_T_SENSOR_ALT1 to support the PRIME X670E-PRO WIFI
without causing a regression for other 600-series boards
Marc Zyngier [Wed, 1 Apr 2026 10:36:11 +0000 (11:36 +0100)]
KVM: arm64: set_id_regs: Allow GICv3 support to be set at runtime
set_id_regs creates a GIC3 guest when possible, and then proceeds
to write the ID registers as if they were not affected by the presence
of a GIC. As it turns out, ID_AA64PFR1_EL1 is the proof of the
contrary.
KVM now makes a point in exposing the GIC support to the guest,
no matter what userspace says (userspace such as QEMU is known to
write silly things at times).
Accommodate for this level of nonsense by teaching set_id_regs about
fields that are mutable, and only compare registers that have been
re-sanitised first.
Marc Zyngier [Wed, 1 Apr 2026 10:36:10 +0000 (11:36 +0100)]
KVM: arm64: Don't advertises GICv3 in ID_PFR1_EL1 if AArch32 isn't supported
Although the AArch32 ID regs are architecturally UNKNOWN when AArch32
isn't supported at any EL, KVM makes a point in making them RAZ.
Therefore, advertising GICv3 in ID_PFR1_EL1 must be gated on AArch32
being supported at least at EL0.
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com> Fixes: a258a383b9177 ("KVM: arm64: gic-v5: Sanitize ID_AA64PFR2_EL1.GCIE") Reported-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20260401103611.357092-16-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
Marc Zyngier [Wed, 1 Apr 2026 10:36:09 +0000 (11:36 +0100)]
KVM: arm64: Correctly plumb ID_AA64PFR2_EL1 into pkvm idreg handling
While we now compute ID_AA64PFR2_EL1 to a glorious 0, we never use
that data and instead return the 0 that corresponds to an allocated
idreg. Not a big deal, but we might as well be consistent.
Marc Zyngier [Wed, 1 Apr 2026 10:36:08 +0000 (11:36 +0100)]
KVM: arm64: Move GICv5 timer PPI validation into timer_irqs_are_valid()
Userspace can set the timer PPI numbers way before a GIC has been
created, leading to odd behaviours on GICv5 as we'd accept non
architectural PPI numbers.
Move the v5 check into timer_irqs_are_valid(), which aligns the
behaviour with the pre-v5 GICs, and is also guaranteed to run
only once a GIC has been configured.
Marc Zyngier [Wed, 1 Apr 2026 10:36:07 +0000 (11:36 +0100)]
KVM: arm64: Remove evaluation of timer state in kvm_cpu_has_pending_timer()
The vgic-v5 code added some evaluations of the timers in a helper funtion
(kvm_cpu_has_pending_timer()) that is called to determine whether
the vcpu can wake-up.
But looking at the timer there is wrong:
- we want to see timers that are signalling an interrupt to the
vcpu, and not just that have a pending interrupt
- we already have kvm_arch_vcpu_runnable() that evaluates the
state of interrupts
- kvm_cpu_has_pending_timer() really is about WFIT, as the timeout
does not generate an interrupt, and is therefore distinct from
the point above
As a consequence, revert these changes and teach vgic_v5_has_pending_ppi()
about checking for pending HW interrupts instead.
Marc Zyngier [Wed, 1 Apr 2026 10:36:06 +0000 (11:36 +0100)]
KVM: arm64: Kill arch_timer_context::direct field
The newly introduced arch_timer_context::direct field is a bit pointless,
as it is always set on timers that are... err... direct, while
we already have a way to get to that by doing a get_map() operation.
Additionally, this field is:
- only set when get_map() is called
- never cleared
and the single point where it is actually checked doesn't call get_map()
at all.
At this stage, it is probably better to just kill it, and rely on
get_map() to give us the correct information.
Marc Zyngier [Wed, 1 Apr 2026 10:36:05 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Correctly set dist->ready once initialised
kvm_vgic_map_resources() targetting a v5 model results in vgic->dist_ready
never being set. This doesn't result in anything really bad, only
some more heavy locking as we go and re-init something for no good reason.
Rejig the code to correctly set the ready flag in all non-failing
cases.
Marc Zyngier [Wed, 1 Apr 2026 10:36:04 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Make the effective priority mask a strict limit
The way the effective priority mask is compared to the priority of
an interrupt to decide whether to wake-up or not, is slightly odd,
and breaks at the limits.
This could result in spurious wake-ups that are undesirable.
Make the computed priority mask comparison a strict inequality, so
that interrupts that have the same priority as the mask are not
signalled.
Marc Zyngier [Wed, 1 Apr 2026 10:36:02 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Transfer edge pending state to ICH_PPI_PENDRx_EL2
While it is perfectly correct to leave the pending state of a level
interrupt as is when queuing it (it is, after all, only driven by
the line), edge pending state must be transfered, as nothing will
lower it.
Marc Zyngier [Wed, 1 Apr 2026 10:36:01 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Hold config_lock while finalizing GICv5 PPIs
Finalizing the PPI state is done without holding any lock, which
means that two vcpus can race against each other and have one zeroing
the state while another one is setting it, or even maybe using it.
Fixing this is done by:
- holding the config lock while performing the initialisation
- checking if SW_PPI has already been advertised, meaning that
we have already completed the initialisation once
Marc Zyngier [Wed, 1 Apr 2026 10:36:00 +0000 (11:36 +0100)]
KVM: arm64: Account for RESx bits in __compute_fgt()
When computing Fine Grained Traps, it is preferable to account for
the reserved bits. The HW will most probably ignore them, unless the
bits have been repurposed to do something else.
Use caution, and fold our view of the reserved bits in,
Marc Zyngier [Wed, 1 Apr 2026 10:35:56 +0000 (11:35 +0100)]
KVM: arm64: vgic: Don't reset cpuif/redist addresses at finalize time
Although we are OK with rewriting idregs at finalize time, resetting
the guest's cpuif (GICv3) or redistributor (GICv3) addresses once
we start running the guest is a pretty bad idea.
Move back this initialisation to vgic creation time.
Paul Sajna [Wed, 1 Apr 2026 03:15:11 +0000 (20:15 -0700)]
arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth
uart9 is debug serial on USB SBU1/2
UART RX is SBU1 and UART TX is SBU2 of the USB-C port).
1.8V Logic Level
Tested using pololu usb07a https://www.pololu.com/product/2585
and CH340 USB-UART
uart6 is bluetooth
Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40010214
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x02140201
Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
Bluetooth: hci0: QCA Downloading qca/judyln/crnv21.bin
Bluetooth: hci0: QCA setup on UART is completed
Add paths for Qualcomm firmware, including:
ipa, modem, venus, gpu
GPU and bluetooth are confirmed working, others may need more
testing/fixes
But regardless they will need the firmware paths specified here
and firmware added upstream before they will work, so might as well
get started on it now.
Abel Vesa [Mon, 30 Mar 2026 14:24:08 +0000 (17:24 +0300)]
arm64: dts: qcom: glymur-crd: Enable DisplayPort support
The two Type-C ports found on Glymur CRD are DisplayPort alternate mode
capable. Everything is in place already for the USB, but for DisplayPort
the controllers need to be enabled.
So enable the related DisplayPort controller for each of these two
ports. Also define the supported link frequencies for each output.
Jens Axboe [Tue, 31 Mar 2026 14:16:58 +0000 (08:16 -0600)]
io_uring/bpf_filters: retain COW'ed settings on parse failures
If io_parse_restrictions() fails, it ends up clearing any restrictions
currently set. The intent is only to clear whatever it already applied,
but it ends up clearing everything, including whatever settings may have
been applied in a copy-on-write fashion already. Ensure that those are
retained.
Jens Axboe [Tue, 31 Mar 2026 13:07:47 +0000 (07:07 -0600)]
io_uring: protect remaining lockless ctx->rings accesses with RCU
Commit 96189080265e addressed one case of ctx->rings being potentially
accessed while a resize is happening on the ring, but there are still
a few others that need handling. Add a helper for retrieving the
rings associated with an io_uring context, and add some sanity checking
to that to catch bad uses. ->rings_rcu is always valid, as long as it's
used within RCU read lock. Any use of ->rings_rcu or ->rings inside
either ->uring_lock or ->completion_lock is sane as well.
Do the minimum fix for the current kernel, but set it up such that this
basic infra can be extended for later kernels to make this harder to
mess up in the future.
Thanks to Junxi Qian for finding and debugging this issue.
Merge tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:
- Rafal provides a complete description of the PCIe Root Complex nodes
in order to silence a number of dtc warnings
- Rosen provides the necessary NVMEM properties to allow describing the
WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
and Wi-Fi buttons for the Linksys EA9200 router
- Linus completes the BCA devices description by adding the I2C block
and fixing interrupts for the DMA block on 63138 and 6878
* tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: EA9200: specify partitions
ARM: dts: BCM5301X: EA9200: add LEDs
ARM: dts: BCM5301X: EA9200: add USB GPIOs
ARM: dts: BCM5301X: EA9200: add WiFi button
ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level
ARM: dts: bcm63148: Add I2C block
ARM: dts: bcm63138: Add I2C block
ARM: dts: bcm6878: Add I2C bus block
ARM: dts: bcm6855: Add I2C bus blocks
ARM: dts: bcm6846: Add I2C bus block
ARM: dts: bcm63138: Fix DMA IRQ
ARM: dts: bcm6878: Fix PL081 DMA block IRQ
ARM: dts: BCM5301X: AC5300: set WAN MAC from nvram
ARM: dts: BCM5301X: AC3100: set WAN MAC from nvram
ARM: dts: BCM5301X: panamera: set WAN MAC from nvram
ARM: dts: BCM5301X: EA9200: set WAN MAC from nvram
ARM: dts: BCM5301X: add root pcie bridges
ARM: dts: BCM5301X: Drop extra NAND controller compatible
ARM: dts: BCM5301X: Describe PCIe controllers fully
Ard Biesheuvel [Tue, 31 Mar 2026 11:04:23 +0000 (13:04 +0200)]
arm64: Use static call trampolines when kCFI is enabled
Implement arm64 support for the 'unoptimized' static call variety, which
routes all calls through a trampoline that performs a tail call to the
chosen function, and wire it up for use when kCFI is enabled. This works
around an issue with kCFI and generic static calls, where the prototypes
of default handlers such as __static_call_nop() and __static_call_ret0()
don't match the expected prototype of the call site, resulting in kCFI
false positives [0].
Since static call targets may be located in modules loaded out of direct
branching range, this needs an ADRP/LDR pair to load the branch target
into R16 and a branch-to-register (BR) instruction to perform an
indirect call.
Unlike on x86, there is no pressing need on arm64 to avoid indirect
calls at all cost, but hiding it from the compiler as is done here does
have some benefits:
- the literal is located in .rodata, which gives us the same robustness
advantage that code patching does;
- no D-cache pollution from fetching hash values from .text sections.
From an execution speed PoV, this is unlikely to make any difference at
all.
Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Kees Cook <kees@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will McVicker <willmcvicker@google.com> Reported-by: Carlos Llamas <cmllamas@google.com> Closes: https://lore.kernel.org/all/20260311225822.1565895-1-cmllamas@google.com/ [0] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stefan Berger [Wed, 25 Mar 2026 21:33:49 +0000 (17:33 -0400)]
evm: Enforce signatures version 3 with new EVM policy 'bit 3'
Enable the configuration of EVM so that it requires that asymmetric
signatures it accepts are of version 3 (sigv3). To enable this, introduce
bit 3 (value 0x0008) that the user may write to EVM's securityfs policy
configuration file 'evm' for sigv3 enforcement.
Mention bit 3 in the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Mimi Zohar [Tue, 10 Mar 2026 13:16:25 +0000 (09:16 -0400)]
ima: add support to require IMA sigv3 signatures
Defining a policy rule with the "appraise_type=imasig" option allows
either v2 or v3 signatures. Defining an IMA appraise rule with the
"appraise_type=sigv3" option requires a file sigv3 signature.
Mimi Zohar [Wed, 11 Mar 2026 01:36:44 +0000 (21:36 -0400)]
ima: add regular file data hash signature version 3 support
Instead of directly verifying the signature of a file data hash,
signature v3 verifies the signature of the ima_file_id structure
containing the file data hash.
To disambiguate the signature usage, the ima_file_id structure also
includes the hash algorithm and the type of data (e.g. regular file
hash or fs-verity root hash).
Tested-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Mimi Zohar [Tue, 10 Mar 2026 23:42:07 +0000 (19:42 -0400)]
ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
Define asymmetric_verify_v3() to calculate the hash of the struct
ima_file_id, before calling asymmetric_verify() to verify the
signature.
Move and update the existing calc_file_id_hash() function with a
simpler, self contained version. In addition to the existing hash
data and hash data length arguments, also pass the hash algorithm.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
genirq/affinity: Remove cpus_read_lock() while reading cpu_possible_mask
cpu_possible_mask is set early during boot based on information from the
firmware. After that it remains read only and is never changed. Therefore
there is no need to acquire the CPU-hotplug lock while reading it.
Remove cpus_read_*() while accessing cpu_possible_mask.
Guangshuo Li [Wed, 1 Apr 2026 02:45:35 +0000 (10:45 +0800)]
cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path
When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls
kobject_put(&dbs_data->attr_set.kobj).
The kobject release callback cpufreq_dbs_data_release() calls
gov->exit(dbs_data) and kfree(dbs_data), but the current error path
then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a
double free.
Keep the direct kfree(dbs_data) for the gov->init() failure path, but
after kobject_init_and_add() has been called, let kobject_put() handle
the cleanup through cpufreq_dbs_data_release().
Fixes: 4ebe36c94aed ("cpufreq: Fix kobject memleak") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/20260401024535.1395801-1-lgs201920130244@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
powercap: intel_rapl: Consolidate PL4 and PMU support flags into rapl_defaults
Currently, PL4 and MSR-based RAPL PMU support are detected using
separate CPU ID tables (pl4_support_ids and pmu_support_ids) in the
MSR driver probe path. This creates a maintenance burden since adding
a new CPU requires updates in two places: the rapl_ids table and one
or both of these capability tables.
Consolidate PL4 and PMU capability information directly into
struct rapl_defaults by adding msr_pl4_support and msr_pmu_support
flags. This allows per-CPU capability to be expressed in a single
place alongside other per-CPU defaults, eliminating the duplicate
CPU ID tables entirely.
powercap: intel_rapl: Move MSR primitives to MSR driver
MSR-specific RAPL primitives differ from those used by TPMI and MMIO
interfaces. Keeping them in the common driver requires
interface-specific handling logic and makes the common layer
unnecessarily complex.
Move the MSR primitive definitions and associated bitmasks into the
MSR interface driver. This change includes:
1. Move MSR-specific bitmask definitions to RAPL MSR driver.
2. Add MSR-local struct rapl_primitive_info instance and assign it to
priv->rpi during MSR probe.
3. Remove the primitive assignment logic from rapl_config() in the
common driver.
thermal: intel: int340x: processor: Move MMIO primitives to MMIO driver
MMIO-specific primitives differ from those used by the TPMI interface.
The MSR and MMIO interfaces shared the same primitives in the common
driver, but MMIO does not require many MSR-specific entries (like PSYS).
Keeping these in the common driver does not add any value and requires
interface-specific handling logic that makes the common layer
unnecessarily complex.
Move the MMIO primitive definitions and associated bitmasks into the
MMIO interface driver. This change includes:
1. Add MMIO-local struct rapl_primitive_info instance without
MSR-specific entries and assign it to priv->rpi during MMIO
initialization.
2. Remove the RAPL MMIO case from rapl_config() in the common driver.
powercap: intel_rapl: Move TPMI primitives to TPMI driver
TPMI-specific RAPL primitives differ from those used by MSR and MMIO
interfaces. Keeping them in the common RAPL driver requires
interface-specific handling logic and makes the common layer
unnecessarily complex.
Move the TPMI primitive definitions and associated bitmasks into the
TPMI interface driver. This change includes:
1. Move TPMI-specific bitmask definitions from intel_rapl_common.c to
intel_rapl_tpmi.c.
2. Add TPMI-local struct rapl_primitive_info instance and assign it to
priv->rpi during TPMI probe.
3. Remove the RAPL TPMI related definitions from the common driver.
powercap: intel_rapl: Move primitive info to header for interface drivers
RAPL primitive information varies across different RAPL interfaces
(MSR, TPMI, MMIO). Keeping them in the common code adds no benefit, but
requires interface-specific handling logic and makes the common layer
unnecessarily complex.
Move the primitive info infrastructure to the shared header to allow
interface drivers to configure RAPL primitives. Specific changes:
1. Move struct rapl_primitive_info, enum unit_type, and
PRIMITIVE_INFO_INIT macro to intel_rapl.h.
2. Change the @rpi field in struct rapl_if_priv from void * to
struct rapl_primitive_info * to improve type safety and eliminate
unnecessary casts.
No functional changes. This is a preparatory refactoring to allow
interface drivers to supply their own RAPL primitive settings.
powercap: intel_rapl: Move MSR default settings into MSR interface driver
MSR-specific RAPL defaults differ from those used by the TPMI interface.
The MMIO and MSR interfaces shared the same rapl_defaults pointer in the
common driver, but MMIO does not require the CPU-specific variations
needed by MSR. Keeping these in the common driver adds unnecessary
complexity and MSR-specific initialization.
Move MSR defaults and CPU matching into the MSR interface driver.
Moves
-----
* Move rapl_check_unit_atom(), set_floor_freq_atom(), and
rapl_compute_time_window_atom() into intel_rapl_msr.c.
* Move MSR unit-field GENMASK definitions and local constants.
* Move all MSR-related rapl_defaults tables and the CPU-ID matching
logic (rapl_ids[]) into the MSR driver.
* Move iosf_mbi dependencies (floor-frequency control and related MBI
register definitions) as they are MSR-platform specific.
Modifications
-------------
* Replace the common driver's platform-device manual alloc/add sequence
with platform_device_register_data() in the MSR driver to pass
matching rapl_defaults as platform_data.
* Update MSR driver probe to assign pdev->dev.platform_data to
priv->defaults.
* Update Atom helper functions to use rp->lead_cpu directly for MSR
reads/writes instead of the generic get_rid().
* Update Atom floor frequency logic to access defaults via the
package private data pointer.
* Convert MSR device creation from fs_initcall() to module_init().
This preserves existing enumeration behavior as the driver was
already using module_init().
* Since rapl_ids need to exist after boot, remove __initconst
specifier.
Julian Braha [Tue, 31 Mar 2026 07:49:20 +0000 (08:49 +0100)]
cpuidle: clean up dead dependencies on CPU_IDLE in Kconfig
The Kconfig in the parent directory already has the first 'if CPU_IDLE'
gating the inclusion of this Kconfig, meaning that the 'depends on
CPUIDLE' statements in these config options are effectively dead code.
Leave the 'if CPU_IDLE...endif' condition, and remove the individual
'depends on' statements in Kconfig.mips and Kconfig.powerpc
This dead code was found by kconfirm, a static analysis tool for
Kconfig.
Julian Braha [Tue, 31 Mar 2026 07:42:42 +0000 (08:42 +0100)]
cpufreq: clean up dead code in Kconfig
There is already an 'if CPU_FREQ' condition wrapping these config
options, making the 'depends on' statement for each a duplicate
dependency (dead code).
Leave the outer 'if CPU_FREQ...endif' and remove the individual
'depends on' statement from each option.
This dead code was found by kconfirm, a static analysis tool for
Kconfig.
Viresh Kumar [Tue, 31 Mar 2026 05:03:46 +0000 (10:33 +0530)]
cpufreq: Allocate QoS freq_req objects with policy
A recent change exposed a bug in the error path: if
freq_qos_add_request(boost_freq_req) fails, min_freq_req may remain a
valid pointer even though it was never successfully added. During policy
teardown, this leads to an unconditional call to
freq_qos_remove_request(), triggering a WARN.
The current design allocates all three freq_req objects together, making
the lifetime rules unclear and error handling fragile.
Simplify this by allocating the QoS freq_req objects at policy
allocation time. The policy itself is dynamically allocated, and two of
the three requests are always needed anyway. This ensures consistent
lifetime management and eliminates the inconsistent state in failure
paths.
Reported-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Fixes: 6e39ba4e5a82 ("cpufreq: Add boost_freq_req QoS request") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Link: https://patch.msgid.link/a293f29d841b86c51f34699c6e717e01858d8ada.1774933424.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ASoC: tegra: Use dev_err_probe() in OPE, PEQ and MBDRC drivers
Log errors in the Tegra210 OPE, PEQ and MBDRC probe paths using
dev_err_probe(). Drop redundant dev_err() at tegra210_peq_regmap_init()
and tegra210_mbdrc_regmap_init() call sites in ope_probe() since
these functions already log errors internally.
ASoC: tegra: Add error logging in tegra210_admaif driver
Log errors in the Tegra210 ADMAIF probe and runtime callback paths.
Drop redundant dev_err() at tegra_isomgr_adma_register() call site
since it already logs errors internally.
Merge tag 'counter-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
Counter fixes for 7.0
Two fixes for rz-mut3-cnt: synchronize runtime PM usage count to toggle
state of the counter, and set counter->parent during probe to ensure the
current dev pointer is accessed during driver operation.
* tag 'counter-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member
counter: rz-mtu3-cnt: prevent counter from being toggled multiple times
Will Deacon [Tue, 31 Mar 2026 15:50:55 +0000 (16:50 +0100)]
KVM: arm64: Don't hold 'vm_table_lock' across guest page reclaim
Now that the teardown of a VM cannot be finalised as long as a reference
is held on the VM, rework __pkvm_reclaim_dying_guest_page() to hold a
reference to the dying VM rather than take the global 'vm_table_lock'
during the reclaim operation.
Will Deacon [Tue, 31 Mar 2026 15:50:54 +0000 (16:50 +0100)]
KVM: arm64: Allow get_pkvm_hyp_vm() to take a reference to a dying VM
Now that completion of the teardown path requires a refcount of zero for
the target VM, we can allow get_pkvm_hyp_vm() to take a reference on a
dying VM, which is necessary to unshare pages with a non-protected VM
during the teardown process itself.
Note that vCPUs belonging to a dying VM cannot be loaded and pages can
only be reclaimed from a protected VM (via
__pkvm_reclaim_dying_guest_page()) if the target VM is in the dying
state.
Will Deacon [Tue, 31 Mar 2026 15:50:53 +0000 (16:50 +0100)]
KVM: arm64: Prevent teardown finalisation of referenced 'hyp_vm'
Destroying a 'hyp_vm' with an elevated referenced count in
__pkvm_finalize_teardown_vm() is only going to lead to tears.
In preparation for allowing limited references to be acquired on dying
VMs during the teardown process, factor out the handle-to-vm logic for
the teardown path and reuse it for both the 'start' and 'finalise'
stages of the teardown process.
Cássio Gabriel [Wed, 1 Apr 2026 11:45:37 +0000 (08:45 -0300)]
ALSA: es1688: add ISA suspend and resume callbacks
The ISA ES1688 driver still carries a disabled suspend/resume block in
its isa_driver definition, while the same file already provides minimal
power-management handling for the PnP ES968 path.
Add ISA-specific PM callbacks and factor the existing ES1688 suspend and
resume sequence into common card-level helpers shared by both probe
paths. Suspend moves the card to D3hot. Resume reinitializes the chip
with snd_es1688_reset() and restores the card to D0, propagating reset
failures to the caller.
This wires up power-management callbacks for the ISA path and keeps the
PM handling consistent between the ISA and PnP probe paths.
Harin Lee [Wed, 1 Apr 2026 09:01:59 +0000 (18:01 +0900)]
ALSA: ctxfi: Precompute SRC allocation loop bound
Replace the capability checks in the SRC and SRCIMP allocation loops
with a precomputed loop bound. Cards with a dedicated mic input
(SB1270, OK0010) allocate all NUM_ATC_SRCS entries, otherwise stop
at 4.
Harin Lee [Wed, 1 Apr 2026 09:01:58 +0000 (18:01 +0900)]
ALSA: ctxfi: Use correct DAIO type for da_desc
Skip the unused DAIO type per model (SPDIFIO on CTSB073X, SPDIFI_BAY
on all others) and use the correct DAIO type directly as da_desc
type. This removes the mismatch and misleading between the actual
DAIO resource and the da_desc type like SPDIFI_BAY (formerly SPDIFI1).
Update related functions accordingly, and drop the unreachable
SPDIFI_BAY case from the hw20k2 daio_device_index().
Harin Lee [Wed, 1 Apr 2026 09:01:57 +0000 (18:01 +0900)]
ALSA: ctxfi: Rename SPDIFI1 to SPDIFI_BAY
Rename the SPDIFI1 enum value to SPDIFI_BAY to better reflect its
purpose as the S/PDIF input on the internal drive bay, as opposed to
the S/PDIF input via Flexijack or optical (SPDIFIO; not SPDIFI-zero).
Simon Trimmer [Tue, 31 Mar 2026 13:19:16 +0000 (13:19 +0000)]
ASoC: amd: ps: Fix missing leading zeros in subsystem_device SSID log
Ensure that subsystem_device is printed with leading zeros when combined
with subsystem_vendor to form the SSID. Without this, devices with upper
bits unset may appear to have an incorrect SSID in the debug output.
Merge tag 'qcom-drivers-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v7.0
Fix the length of the PD restart reason string in pd-mapper to avoid
QMI decoding errors, resulting in the notification being dropped.
Fix the newly introduce handling of TBT/USB4 notifications in pmic_glink
altmode driver, as it broke the handling of non-TBT/USB4 DisplayPort
unplug events.
* tag 'qcom-drivers-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case
soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Merge tag 'riscv-soc-fixes-for-v7.0-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc fixes for v7.0-rc6
Microchip:
More resource leak fixes for unlikely scenarios, and a change to the
auto-update "firmware" driver to prevent it probing on systems with
engineering silicon where it cannot be used.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v7.0-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fail auto-update probe if no flash found
soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind
soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Merge tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
nuvoton: first batch of arm64 devicetree changes for v7.1
Just the one change this time, dropping syscon properties where they weren't
defined.
* tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
arm64: dts: nuvoton: drop unused syscon property from watchdog node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Merge the pmdomain fixes for v7.0-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Merge the immutable branch pmdomain into next to get the changes queued and
tested for the next release. The pmdomain branch hosts minor core changes
for pmdomain.
Merge tag 'aspeed-7.0-fixes-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
aspeed: first batch of fixes for v7.0
* tag 'aspeed-7.0-fixes-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
soc: aspeed: socinfo: Mask table entries for accurate SoC ID matching
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Merge tag 'reset-fixes-for-v7.0-2' of https://git.pengutronix.de/git/pza/linux into arm/fixes
Reset controller fixes for v7.0, part 2
* Decouple spacemit K3 reset lines that were incorrectly coupled
together as one, but are in fact separate resets in hardware.
* Fix a double free in the reset_add_gpio_aux_device() error path.
This has already been fixed on reset/next by commit a9b95ce36de4
("reset: gpio: add a devlink between reset-gpio and its consumer").
* Fix the MODULE_AUTHOR string in the rzg2l-usbphy-ctrl driver.
* tag 'reset-fixes-for-v7.0-2' of https://git.pengutronix.de/git/pza/linux:
reset: spacemit: k3: Decouple composite reset lines
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
PM: domains: De-constify fields in struct dev_pm_domain_attach_data
It doesn't really make sense to keep u32 fields to be marked as const.
Having the const fields prevents their modification in the driver. Instead
the whole struct can be defined as const, if it is constant.
Maíra Canal [Tue, 17 Mar 2026 22:41:50 +0000 (19:41 -0300)]
pmdomain: bcm: bcm2835-power: Replace open-coded polling with readl_poll_timeout_atomic()
Replace hand-rolled ktime_get_ns()/cpu_relax() polling loops with
readl_poll_timeout_atomic() for the power-on (POWOK), and memory
repair (MRDONE) waits.
Yuanshen Cao [Thu, 5 Mar 2026 03:34:08 +0000 (03:34 +0000)]
pmdomain: sunxi: Add support for A733 to Allwinner PCK600 driver
The Allwinner A733 PCK600, similar to A523 PCK600, is likely a
customized version of ARM PCK-600 power controller. It shares the same
BSP driver with A523. According to the BSP provided by Radxa, unlike
A523, it doesn't require reset, as well as a different pair of delay
values.
Make reset optional in the sunxi pck600 driver and add support
for A733.
Abel Vesa [Mon, 2 Mar 2026 13:29:32 +0000 (15:29 +0200)]
pmdomain: qcom: rpmhpd: Add Eliza RPMh Power Domains
Add RPMh Power Domains support for the Eliza platform. The list of power
domains is taken from downstream. Even though the cmd-db does list MMCX
and MXC, they are not used, so they should not be describe.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Wed, 4 Mar 2026 10:14:57 +0000 (11:14 +0100)]
pmdomain: arm: Add print after a successful probe for SCMI power domains
It can be discussed how useful a print is after a successful probe. In the
SCMI power domain case it's seems valuable, as it let us inform about the
number of initialized power domains too, which is fetched from firmware.
Therefore, let's add a print about this, which also aligns with the
behaviour of the SCMI perf domain driver.
Chris Morgan [Fri, 30 Jan 2026 16:31:01 +0000 (10:31 -0600)]
pmdomain: rockchip: quiet regulator error on -EPROBE_DEFER
Change the dev_err() to dev_err_probe() under rockchip_pd_power_on()
to prevent errors early in the boot process when the requested
regulator is not yet available. This converts errors like the following
to debug messages:
rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517
Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Tested-by: Diederik de Haas <diederik@cknow-tech.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Irving-CH Lin [Mon, 2 Feb 2026 06:48:15 +0000 (14:48 +0800)]
pmdomain: mediatek: Add power domain driver for MT8189 SoC
Introduce a new power domain (pmd) driver for the MediaTek mt8189 SoC.
This driver ports and refines the power domain framework, dividing
hardware blocks (CPU, GPU, peripherals, etc.) into independent power
domains for precise and energy-efficient power management.
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Irving-CH Lin [Mon, 2 Feb 2026 06:48:14 +0000 (14:48 +0800)]
pmdomain: mediatek: Add bus protect control flow for MT8189
In MT8189 mminfra power domain, the bus protect policy separates
into two parts, one is set before subsys clocks enabled, and another
need to enable after subsys clocks enable.
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Mon, 19 Jan 2026 14:31:15 +0000 (15:31 +0100)]
pmdomain: core: Extend statistics for domain idle states with s2idle data
To allow user space to monitor the selection of the domain idle state
during s2idle for a CPU PM domain, let's extend the debugfs support in
genpd with this information.
Ulf Hansson [Mon, 19 Jan 2026 14:31:14 +0000 (15:31 +0100)]
pmdomain: core: Show latency/residency for domain idle states in debugfs
Similar to how cpuidle provides the values for latency and residency for
CPU's idle states through sysfs, let's make the corresponding data for PM
domain's idle states available for user space, via genpd's debugfs support.
Ulf Hansson [Mon, 19 Jan 2026 14:31:13 +0000 (15:31 +0100)]
pmdomain: core: Restructure domain idle states data for genpd in debugfs
To prepare for additional information to be added for the domain idle
states in genpd's debugfs, let's make the existing information denser. To
allow that, let's move the static information of the domain idle states
into a separate debugfs file.
Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
projects / thirdparty / linux.git / log
