Paolo Bonzini [Fri, 16 Jun 2023 21:58:25 +0000 (23:58 +0200)]
target/i386: TCG supports WBNOINVD
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 20 Jun 2023 22:43:22 +0000 (00:43 +0200)]
target/i386: do not accept RDSEED if CPUID bit absent
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 16 Jun 2023 22:01:58 +0000 (00:01 +0200)]
target/i386: TCG supports 3DNow! prefetch(w)
The AMD prefetch(w) instructions have not been deprecated together with the rest
of 3DNow!, and in fact are even supported by newer Intel processor. Mark them
as supported by TCG, as it supports all of 3DNow!.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 16 Jun 2023 21:57:30 +0000 (23:57 +0200)]
target/i386: fix INVD vmexit
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marcelo Tosatti [Sun, 18 Jun 2023 21:24:40 +0000 (23:24 +0200)]
kvm: reuse per-vcpu stats fd to avoid vcpu interruption
A regression has been detected in latency testing of KVM guests.
More specifically, it was observed that the cyclictest
numbers inside of an isolated vcpu (running on isolated pcpu) are:
Where a maximum of 50us is acceptable.
The implementation of KVM_GET_STATS_FD uses run_on_cpu to query
per vcpu statistics, which interrupts the vcpu (and is unnecessary).
To fix this, open the per vcpu stats fd on vcpu initialization,
and read from that fd from QEMU's main thread.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gavin Shan [Tue, 9 May 2023 00:27:39 +0000 (10:27 +1000)]
hw/riscv: Validate cluster and NUMA node boundary
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gavin Shan [Tue, 9 May 2023 00:27:38 +0000 (10:27 +1000)]
hw/arm: Validate cluster and NUMA node boundary
There are two ARM machines where NUMA is aware: 'virt' and 'sbsa-ref'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster have been associated with different NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-3-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gavin Shan [Tue, 9 May 2023 00:27:37 +0000 (10:27 +1000)]
numa: Validate cluster and NUMA node boundary if required
For some architectures like ARM64, multiple CPUs in one cluster can be
associated with different NUMA nodes, which is irregular configuration
because we shouldn't have this in baremetal environment. The irregular
configuration causes Linux guest to misbehave, as the following warning
messages indicate.
Improve the situation to warn when multiple CPUs in one cluster have
been associated with different NUMA nodes. However, one NUMA node is
allowed to be associated with different clusters.
Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-2-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/remote/proxy: Remove dubious 'event_notifier-posix.c' include
event_notifier-posix.c is registered in meson's util_ss[] source
set, which is built as libqemuutil.a.p library. Both tools and
system emulation binaries are linked with qemuutil, so there is
no point in including this source file.
Introduced in commit bd36adb8df ("multi-process: create IOHUB
object to handle irq").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606134913.93724-1-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 May 2023 15:56:33 +0000 (17:56 +0200)]
build: further refine build.ninja rules
In commit b0fcc6fc7fc1 ("build: rebuild build.ninja using
"meson setup --reconfigure"", 2023-05-19) I changed the build.ninja
rule in the Makefile to use "meson setup" so that the Makefile would
pick up a changed path to the meson binary.
However, there was a reason why build.ninja was rebuilt using $(NINJA)
itself. Namely, ninja has its own cache of file modification times,
and if it does not know about the modification that was done outside
its control, it will *also* try to regenerate build.ninja. This can be
simply by running "make" on a fresh tree immediately after "configure";
that will trigger an unnecessary meson run.
So, apply a refinement to the rule in order to cover both cases:
- track the meson binary that was used (and that is embedded in
build.ninja's reconfigure rules); to do this, write build.ninja.stamp
right after executing meson successfully
- if it changed, force usage of "$(MESON) setup --reconfigure" to
update the path in the reconfigure rule
- if it didn't change, use "$(NINJA) build.ninja" just like before
commit b0fcc6fc7fc1.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Thu, 22 Jun 2023 11:41:32 +0000 (13:41 +0200)]
tests/qtest/cxl-test: Clean up temporary directories after testing
It's good style to clean up temporary directories when they
are not needed anymore.
Message-Id: <20230622114132.372898-1-thuth@redhat.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
gitlab: support disabling job auto-run in upstream
In forks QEMU_CI=1 can be used to create a pipeline but not auto-run any
jobs. In upstream jobs always auto-run, which is equiv of QEMU_CI=2.
This supports setting QEMU_CI=1 in upstream, to disable job auto-run.
This can be used to preserve CI minutes if repushing a branch to staging
with a specific fix that only needs testing in limited scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-6-berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
gitlab: avoid extra pipelines for tags and stable branches
In upstream context we only run pipelines on staging branches, and
limited publishing jobs on the default branch.
We don't want to run pipelines on stable branches, or tags, because
the content will have already been tested on a staging branch before
getting pushed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-5-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
gitlab: stable staging branches publish containers in a separate tag
If the stable staging branches publish containers under the 'latest' tag
they will clash with containers published on the primary staging branch,
as well as with each other. This introduces logic that overrides the
container tag when jobs run against the stable staging branches.
The CI_COMMIT_REF_SLUG variable we use expands to the git branch name,
but with most special characters removed, such that it is valid as a
docker tag name. eg 'staging-8.0' will get a slug of 'staging-8-0'
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-4-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
gitlab: allow overriding name of the upstream repository
The CI rules have special logic for what happens in upstream. To enable
contributors who modify CI rules to test this logic, however, they need
to be able to override which repo is considered upstream. This
introduces the 'QEMU_CI_UPSTREAM' variable
to make it look as if my namespace is the actual upstream. Namespace in
this context refers to the path fragment in gitlab URLs that is above
the repository. Typically this will be the contributor's gitlab login
name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-3-berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
We use a fixed container tag of 'latest' so that contributors' forks
don't end up with an ever growing number of containers as they work
on throwaway feature branches.
This fixed tag causes problems running CI upstream in stable staging
branches, however, because the stable staging branch will publish old
container content that clashes with that needed by primary staging
branch. This makes it impossible to reliably run CI pipelines in
parallel in upstream for different staging branches.
This introduces $QEMU_CI_CONTAINER_TAG global variable as a way to
change which tag container publishing uses. Initially it can be set
by contributors as a git push option if they want to override the
default use of 'latest' eg
this is useful if contributors need to run pipelines for different
branches concurrently in their forks.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-2-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Milan Zamazal [Wed, 21 Jun 2023 10:17:09 +0000 (12:17 +0200)]
tests/qtest: Fix a comment typo in vhost-user-test.c
Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230621101710.297975-4-mzamazal@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Merge tag 'pull-ppc-20230626' of https://github.com/legoater/qemu into staging
ppc queue:
* New maintainers
* Nested implementation cleanups
* Various cleanups of the CPU implementation
* SMT support for pseries
* Improvements of the XIVE2 TIMA modeling
* Extra avocado tests for pseries
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmSZKF8ACgkQUaNDx8/7
# 7KGSiBAAlHC4S9J5ujzTIojaWY72d2ZinkC+WpBus9Wr91DqaUSUd/JbzDxQCvXh
# dBWEbcyQ+abb8M3OQ3fMq9TfD2/LhxxXb+uwHIJ+ylITBnsRVCQv/4/gi3EkpRid
# h4q3wYH8OYNfCQd/cWYXNgCSNj1nS9sRrEKFXaB0JeQWHzHxriJS/SoIhilqvUru
# LFEytWNb3bxRkEkt8oAetOa9+DNLowUQ9IdzswqGcib09po3b1k4+ThfcvzU9nAc
# ek31/h1W6cJbOJcgRO2dhWUZYp7cfmcnOa02E84tGFvvY/kYbjzPZZnoniSXD4uf
# YWFCoB3VxUoZ/YKCT/pDKHVdXmLLrfckNbo9vQNEcwmjr8m0Q3d1ewD5O9oNRpgN
# H0QMENfsdojztosOm3KPQ20aqNf1R7rQegYTiWf3B2fKZ6PIqnn3tBPxaEDkH7NC
# GTAKnBhF48lcHSF/4XOfGdmqhGgPRWX/Tv0wia7RY/A4NEfiIImIu+nYSGNBbu3y
# 7xlmtcumTlsRityOZnYI3bN5ubv++XPwU5NIJPACqvAbhif2rf1vQ9rMkkK785GL
# ciJ/5f6zXsLU7DfWP+qbTBizchQgigXnRZEEc7Seo6Bwtru22oxug0qQZ5QCgyXl
# Fg5Xuoq/6T4JC75pvxh1BjVlZc3Okzbfmsj+aZNrXO581HVJ2JI=
# =XLtJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 07:55:43 AM CEST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20230626' of https://github.com/legoater/qemu: (30 commits)
tests/avocado: ppc test VOF bios Linux boot
pnv/xive2: Check TIMA special ops against a dedicated array for P10
pnv/xive2: Add a get_config() method on the presenter class
tests/avocado: Add ppc64 pseries multiprocessor boot tests
tests/avocado: boot ppc64 pseries to Linux VFS mount
spapr: TCG allow up to 8-thread SMT on POWER8 and newer CPUs
hw/ppc/spapr: Test whether TCG is enabled with tcg_enabled()
target/ppc: Add msgsnd/p and DPDES SMT support
target/ppc: Add support for SMT CTRL register
target/ppc: Add initial flags and helpers for SMT support
target/ppc: Fix sc instruction handling of LEV field
target/ppc: Better CTRL SPR implementation
target/ppc: Add ISA v3.1 LEV indication in SRR1 for system call interrupts
target/ppc: Implement HEIR SPR
target/ppc: Add SRR1 prefix indication to interrupt handlers
target/ppc: Change partition-scope translate interface
target/ppc: Fix instruction loading endianness in alignment interrupt
ppc/spapr: Move spapr nested HV to a new file
ppc/spapr: load and store l2 state with helper functions
ppc/spapr: Add a nested state struct
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nicholas Piggin [Fri, 23 Jun 2023 12:21:35 +0000 (22:21 +1000)]
tests/avocado: ppc test VOF bios Linux boot
VOF is the new lightweight fast pseries bios. Add a Linux boot test
using VOF.
More tests could be moved to use VOF becasue it's much faster, but
just dip one toe in the water first here. SLOF should continue to be
tested too.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Frederic Barrat [Thu, 22 Jun 2023 16:25:27 +0000 (18:25 +0200)]
pnv/xive2: Check TIMA special ops against a dedicated array for P10
Accessing the TIMA from some specific ring/offset combination can
trigger a special operation, with or without side effects. It is
implemented in qemu with an array of special operations to compare
accesses against. Since the presenter on P10 is pretty similar to P9,
we had the full array defined for P9 and we just had a special case
for P10 to treat one access differently. With a recent change, 6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports"), we
now ignore some of the bits of the TIMA address, but that patch
managed to botch the detection of the special case for P10.
To clean that up, this patch introduces a full array of special ops to
be used for P10. The code to detect a special access is common with
P9, only the array of operations differs. The presenter can pick the
correct array of special ops based on its configuration introduced in
a previous patch.
Fixes: Coverity CID 1512997, 1512998 Fixes: 6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports") Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Frederic Barrat [Thu, 22 Jun 2023 16:25:26 +0000 (18:25 +0200)]
pnv/xive2: Add a get_config() method on the presenter class
The presenters for xive on P9 and P10 are mostly similar but the
behavior can be tuned through a few CQ registers. This patch adds a
"get_config" method, which will allow to access that config from the
presenter in a later patch.
For now, just define the config for the TIMA version.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add mult-thread/core/socket Linux boot tests that ensure the right
topology comes up. Of particular note is a SMT test, which is a new
capability for TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Thu, 22 Jun 2023 09:33:55 +0000 (19:33 +1000)]
spapr: TCG allow up to 8-thread SMT on POWER8 and newer CPUs
PPC TCG supports SMT CPU configurations for non-hypervisor state, so
permit POWER8-10 pseries machines to enable SMT.
This requires PIR and TIR be set, because that's how sibling thread
matching is done by TCG.
spapr's nested-HV capability does not currently coexist with SMT, so
that combination is prohibited (interestingly somewhat analogous to
LPAR-per-core mode on real hardware which also does not support KVM).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Also test smp_threads when checking for POWER8 CPU and above ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
hw/ppc/spapr: Test whether TCG is enabled with tcg_enabled()
Although the PPC target only supports the TCG and KVM
accelerators, QEMU supports more. We can not assume that
'!kvm == tcg', so test for the correct accelerator. This
also eases code review, because here we don't care about
KVM, we really want to test for TCG.
Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: Fix changelog typo noticed by Zoltan] Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Thu, 22 Jun 2023 09:33:52 +0000 (19:33 +1000)]
target/ppc: Add support for SMT CTRL register
A relatively simple case to begin with, CTRL is a SMT shared register
where reads and writes need to synchronise against state changes by
other threads in the core.
Atomic serialisation operations are used to achieve this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Thu, 22 Jun 2023 09:33:51 +0000 (19:33 +1000)]
target/ppc: Add initial flags and helpers for SMT support
TGC SMT emulation needs to know whether it is running with SMT siblings,
to be able to iterate over siblings in a core, and to serialise
threads to access per-core shared SPRs. Add infrastructure to do these
things.
For now the sibling iteration and serialisation are implemented in a
simple but inefficient way. SMT shared state and sibling access is not
too common, and SMT configurations are mainly useful to test system
code, so performance is not to critical.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: fix build breakage with clang ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Wed, 21 Jun 2023 11:09:38 +0000 (21:09 +1000)]
target/ppc: Fix sc instruction handling of LEV field
The top bits of the LEV field of the sc instruction are to be treated as
as a reserved field rather than a reserved value, meaning LEV is
effectively the bottom bit. LEV=0xF should be treated as LEV=1 and be
a hypercall, for example.
This changes the instruction execution to just set lev from the low bit
of the field. Processors which don't support the LEV field will continue
to ignore it.
ISA v3.1 defines LEV to be 2 bits, in order to add the 'sc 2' ultracall
instruction. TCG does not support Ultravisor, so don't worry about
that bit.
Suggested-by: "Harsh Prateek Bora" <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 13:15:23 +0000 (23:15 +1000)]
target/ppc: Better CTRL SPR implementation
The CTRL register is able to write the bit in the RUN field, which gets
reflected into the TS field which is read-only and contains the state of
the RUN field for all threads in the core.
TCG does not implement SMT, so the correct implementation just requires
mirroring the RUN bit into the first bit of the TS field.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 13:13:21 +0000 (23:13 +1000)]
target/ppc: Add ISA v3.1 LEV indication in SRR1 for system call interrupts
System call interrupts in ISA v3.1 CPUs add a LEV indication in SRR1
that corresponds with the LEV field of the instruction that caused the
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 13:10:43 +0000 (23:10 +1000)]
target/ppc: Add SRR1 prefix indication to interrupt handlers
ISA v3.1 introduced prefix instructions. Among the changes, various
synchronous interrupts report whether they were caused by a prefix
instruction in (H)SRR1.
The case of instruction fetch that causes an HDSI due to access of a
process-scoped table faulting on the partition scoped translation is the
tricky one. As with ISIs and HISIs, this does not try to set the prefix
bit because there is no instruction image to be loaded. The HDSI needs
the originating access type to be passed through to the handler to
distinguish this from HDSIs that fault translating process scoped tables
originating from a load or store instruction (in that case the prefix
bit should be provided).
Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch issues ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rather than always performing partition scope page table translation
with access type of 0 (MMU_DATA_LOAD), pass through the processor
access type which first initiated the translation sequence. Process-
scoped page table loads are then set to MMU_DATA_LOAD access type in
the xlate function.
This will allow more information to be passed to the exception
handler in the next patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 13:10:41 +0000 (23:10 +1000)]
target/ppc: Fix instruction loading endianness in alignment interrupt
powerpc ifetch endianness depends on MSR[LE] so it has to byteswap
after cpu_ldl_code(). This corrects DSISR bits in alignment
interrupts when running in little endian mode.
Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 10:57:37 +0000 (20:57 +1000)]
ppc/spapr: Move spapr nested HV to a new file
Create spapr_nested.c for most of the nested HV implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 10:57:36 +0000 (20:57 +1000)]
ppc/spapr: load and store l2 state with helper functions
Arguably this is just shuffling around register accesses, but one nice
thing it does is allow the exit to save away the L2 state then switch
the environment to the L1 before copying L2 data back to the L1, which
logically flows more naturally and simplifies the error paths.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 10:57:35 +0000 (20:57 +1000)]
ppc/spapr: Add a nested state struct
Rather than use a copy of CPUPPCState to store the host state while
the environment has been switched to the L2, use a new struct for
this purpose.
Have helper functions to save and load this host state.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Tue, 20 Jun 2023 10:57:34 +0000 (20:57 +1000)]
ppc/spapr: H_ENTER_NESTED should restore host XER ca field
Fix missing env->ca restore when going from L2 back to the host.
Fixes: 120f738a467 ("spapr: implement nested-hv capability for the virtual hypervisor") Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Tue, 20 Jun 2023 05:59:10 +0000 (07:59 +0200)]
ppc/pnv: Rephrase error when run with KVM
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Tue, 20 Jun 2023 05:59:09 +0000 (07:59 +0200)]
ppc/bamboo: Report an error when run with KVM
The 'bamboo' machine was used as a KVM platform in the early days (~2008).
It clearly doesn't support it anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Tue, 20 Jun 2023 05:59:04 +0000 (07:59 +0200)]
MAINTAINERS: Add reviewer for PowerPC TCG CPUs
Nick has great knowledge of the PowerPC CPUs, software and hardware.
Add him as a reviewer on CPU TCG modeling.
Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Tue, 20 Jun 2023 05:59:03 +0000 (07:59 +0200)]
MAINTAINERS: Add reviewers for PowerNV baremetal emulation
Fred and Nick have been hacking baremetal POWER systems (OPAL) for
many years. They use and modify the QEMU models regularly. Add them as
PowerNV reviewers.
Cc: Frédéric Barrat <fbarrat@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Joel Stanley [Mon, 19 Jun 2023 23:36:36 +0000 (09:06 +0930)]
ppc/pnv/pci: Clean up error messages
The phb error macros add a newline for you, so remove the second one to
avoid double whitespace.
Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Nicholas Piggin [Wed, 31 May 2023 01:23:09 +0000 (11:23 +1000)]
target/ppc: gdbstub init spr gdb_id for all CPUs
Make sure each CPU gets its state set up for gdb, not just the ones
before PowerPCCPUClass has had its gdb state set up.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Merge tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'pull-target-arm-20230623' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Add (experimental) support for FEAT_RME
* host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
* target/arm: Restructure has_vfp_d32 test
* hw/arm/sbsa-ref: add ITS support in SBSA GIC
* target/arm: Fix sve predicate store, 8 <= VQ <= 15
* pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
* tag 'pull-target-arm-20230623' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
target/arm: Fix sve predicate store, 8 <= VQ <= 15
hw/arm/sbsa-ref: add ITS support in SBSA GIC
target/arm: Restructure has_vfp_d32 test
host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
docs/system/arm: Document FEAT_RME
target/arm: Add cpu properties for enabling FEAT_RME
target/arm: Implement the granule protection check
target/arm: Implement GPC exceptions
target/arm: Add GPC syndrome
target/arm: Use get_phys_addr_with_struct for stage2
target/arm: Move s1_is_el0 into S1Translate
target/arm: Use get_phys_addr_with_struct in S1_ptw_translate
target/arm: Handle no-execute for Realm and Root regimes
target/arm: Handle Block and Page bits for security space
target/arm: NSTable is RES0 for the RME EL3 regime
target/arm: Pipe ARMSecuritySpace through ptw.c
target/arm: Remove __attribute__((nonnull)) from ptw.c
target/arm: Introduce ARMMMUIdx_Phys_{Realm,Root}
target/arm: Adjust the order of Phys and Stage2 ARMMMUIdx
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Helge Deller [Sat, 24 Jun 2023 09:45:52 +0000 (11:45 +0200)]
target/hppa: Update to SeaBIOS-hppa version 8
Update SeaBIOS-hppa to version 8.
Fixes:
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes & machine run status
Helge Deller [Fri, 23 Jun 2023 06:24:30 +0000 (08:24 +0200)]
target/hppa: Fix OS reboot issues
When the OS triggers a reboot, the reset helper function sends a
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET) together with an
EXCP_HLT exception to halt the CPUs.
So, at reboot when initializing the CPUs again, make sure to set all
instruction pointers to the firmware entry point, disable any interrupts,
disable data and instruction translations, enable PSW_Q bit and tell qemu
to unhalt (halted=0) the CPUs again.
This fixes the various reboot issues which were seen when rebooting a
Linux VM, including the case where even the monarch CPU has been virtually
halted from the OS (e.g. via "chcpu -d 0" inside the Linux VM).
Peter Maydell [Tue, 20 Jun 2023 16:20:24 +0000 (17:20 +0100)]
pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
The xkb official name for the Arabic keyboard layout is 'ara'.
However xkb has for at least the past 15 years also permitted it to
be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this
synoynm was removed, which breaks compilation of QEMU:
FAILED: pc-bios/keymaps/ar
/home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar
xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths
xkbcommon: ERROR: 1 include paths searched:
xkbcommon: ERROR: /usr/share/X11/xkb
xkbcommon: ERROR: 3 include paths could not be added:
xkbcommon: ERROR: /home/fred/.config/xkb
xkbcommon: ERROR: /home/fred/.xkb
xkbcommon: ERROR: /etc/xkb
xkbcommon: ERROR: Abandoning symbols file "(unnamed)"
xkbcommon: ERROR: Failed to compile xkb_symbols
xkbcommon: ERROR: Failed to compile keymap
The upstream xkeyboard-config change removing the compat
mapping is:
https://gitlab.freedesktop.org/xkeyboard-config/xkeyboard-config/-/commit/470ad2cd8fea84d7210377161d86b31999bb5ea6
Make QEMU always ask for the 'ara' xkb layout, which should work on
both older and newer xkeyboard-config. We leave the QEMU name for
this keyboard layout as 'ar'; it is not the only one where our name
for it deviates from the xkb standard name.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709
target/arm: Fix sve predicate store, 8 <= VQ <= 15
Brown bag time: store instead of load results in uninitialized temp.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1704 Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620134659.817559-1-richard.henderson@linaro.org Fixes: e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r") Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 22 Jun 2023 13:08:23 +0000 (14:08 +0100)]
host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
We use __builtin_subcll() to do a 64-bit subtract with borrow-in and
borrow-out when the host compiler supports it. Unfortunately some
versions of Apple Clang have a bug in their implementation of this
intrinsic which means it returns the wrong value. The effect is that
a QEMU built with the affected compiler will hang when emulating x86
or m68k float80 division.
The upstream LLVM issue is:
https://github.com/llvm/llvm-project/issues/55253
The commit that introduced the bug apparently never made it into an
upstream LLVM release without the subsequent fix
https://github.com/llvm/llvm-project/commit/fffb6e6afdbaba563189c1f715058ed401fbc88d
but unfortunately it did make it into Apple Clang 14.0, as shipped
in Xcode 14.3 (14.2 is reported to be OK). The Apple bug number is FB12210478.
Add ifdefs to avoid use of __builtin_subcll() on Apple Clang version
14 or greater. There is not currently a version of Apple Clang which
has the bug fix -- when one appears we should be able to add an upper
bound to the ifdef condition so we can start using the builtin again.
We make the lower bound a conservative "any Apple clang with major
version 14 or greater" because the consequences of incorrectly
disabling the builtin when it would work are pretty small and the
consequences of not disabling it when we should are pretty bad.
Many thanks to those users who both reported this bug and also
did a lot of work in identifying the root cause; in particular
to Daniel Bertalan and osy.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1631
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1659 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Daniel Bertalan <dani@danielbertalan.dev> Tested-by: Tested-By: Solra Bizna <solra@bizna.name>
Message-id: 20230622130823.1631719-1-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230622143046.1578160-1-richard.henderson@linaro.org
[PMM: fixed typo; note experimental status in emulation.rst too] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Add cpu properties for enabling FEAT_RME
Add an x-rme cpu property to enable FEAT_RME.
Add an x-l0gptsz property to set GPCCR_EL3.L0GPTSZ,
for testing various possible configurations.
We're not currently completely sure whether FEAT_RME will
be OK to enable purely as a CPU-level property, or if it will
need board co-operation, so we're making these experimental
x- properties, so that the people developing the system
level software for RME can try to start using this and let
us know how it goes. The command line syntax for enabling
this will change in future, without backwards-compatibility.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-21-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement the granule protection check
Place the check at the end of get_phys_addr_with_struct,
so that we check all physical results.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle GPC Fault types in arm_deliver_fault, reporting as
either a GPC exception at EL3, or falling through to insn
or data aborts at various exception levels.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function takes the fields as filled in by
the Arm ARM pseudocode for TakeGPCException.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use get_phys_addr_with_struct for stage2
This fixes a bug in which we failed to initialize
the result attributes properly after the memset.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing this to get_phys_addr_lpae, stash it
in the S1Translate structure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use get_phys_addr_with_struct in S1_ptw_translate
Do not provide a fast-path for physical addresses,
as those will need to be validated for GPC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Handle no-execute for Realm and Root regimes
While Root and Realm may read and write data from other spaces,
neither may execute from other pa spaces.
This happens for Stage1 EL3, EL2, EL2&0, and Stage2 EL1&0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Handle Block and Page bits for security space
With Realm security state, bit 55 of a block or page descriptor during
the stage2 walk becomes the NS bit; during the stage1 walk the bit 5
NS bit is RES0. With Root security state, bit 11 of the block or page
descriptor during the stage1 walk becomes the NSE bit.
Rather than collecting an NS bit and applying it later, compute the
output pa space from the input pa space and unconditionally assign.
This means that we no longer need to adjust the output space earlier
for the NSTable bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: NSTable is RES0 for the RME EL3 regime
Test in_space instead of in_secure so that we don't
switch out of Root space.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add input and output space members to S1Translate. Set and adjust
them in S1_ptw_translate, and the various points at which we drop
secure state. Initialize the space in get_phys_addr; for now leave
get_phys_addr_with_secure considering only secure vs non-secure spaces.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Remove __attribute__((nonnull)) from ptw.c
This was added in 7e98e21c098 as part of a reorg in which
one of the argument had been legally NULL, and this caught
actual instances. Now that the reorg is complete, this
serves little purpose.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_RME, there are four physical address spaces.
For now, just define the symbols, and mention them in
the same spots as the other Phys indexes in ptw.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Adjust the order of Phys and Stage2 ARMMMUIdx
It will be helpful to have ARMMMUIdx_Phys_* to be in the same
relative order as ARMSecuritySpace enumerators. This requires
the adjustment to the nstable check. While there, check for being
in secure state rather than rely on clearing the low bit making
no change to non-secure state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
include/exec/memattrs: Add two bits of space to MemTxAttrs
We will need 2 bits to represent ARMSecurityState.
Do not attempt to replace or widen secure, even though it
logically overlaps the new field -- there are uses within
e.g. hw/block/pflash_cfi01.c, which don't know anything
specific about ARM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce both the enumeration and functions to retrieve
the current state, and state outside of EL3.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes GPCCR, GPTBR, MFAR, the TLB flush insns PAALL, PAALLOS,
RPALOS, RPAOS, and the cache flush insns CIPAPA and CIGDPAPA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With RME, SEL2 must also be present to support secure state.
The NS bit is RES1 if SEL2 is not present.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define the missing SCR and HCR bits, allow SCR_NSE and {SCR,HCR}_GPF
to be set, and invalidate TLBs when NSE changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the missing field for ID_AA64PFR0, and the predicate.
Disable it if EL3 is forced off by the board or command-line.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
zhenwei pi [Wed, 3 May 2023 11:54:37 +0000 (19:54 +0800)]
cryptodev: fix memory leak during stats query
object_get_canonical_path already returns newly allocated memory, this
means no additional g_strdup required. Remove g_strdup to avoid memory
leak.
Fixes: Coverity CID 1508074 Fixes: f2b901098 ("cryptodev: Support query-stats QMP command") Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230503115437.262469-1-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Fri, 26 May 2023 15:31:43 +0000 (17:31 +0200)]
vdpa: move CVQ isolation check to net_init_vhost_vdpa
Evaluating it at start time instead of initialization time may make the
guest capable of dynamically adding or removing migration blockers.
Also, moving to initialization reduces the number of ioctls in the
migration, reducing failure possibilities.
As a drawback we need to check for CVQ isolation twice: one time with no
MQ negotiated and another one acking it, as long as the device supports
it. This is because Vring ASID / group management is based on vq
indexes, but we don't know the index of CVQ before negotiating MQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153143.470745-3-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Eugenio Pérez [Fri, 26 May 2023 15:31:42 +0000 (17:31 +0200)]
vdpa: return errno in vhost_vdpa_get_vring_group error
We need to tell in the caller, as some errors are expected in a normal
workflow. In particular, parent drivers in recent kernels with
VHOST_BACKEND_F_IOTLB_ASID may not support vring groups. In that case,
-ENOTSUP is returned.
This is the case of vp_vdpa in Linux 6.2.
Next patches in this series will use that information to know if it must
abort or not. Also, next patches return properly an errp instead of
printing with error_report.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153143.470745-2-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-mem: Simplify bitmap handling and virtio_mem_set_block_state()
Let's separate plug and unplug handling to prepare for future changes
and make the code a bit easier to read -- working on block states
(plugged/unplugged) instead of on a bitmap.
Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gavin Shan <gshan@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230523183036.517957-1-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is not ideal when we migrate to updated distribution: we have to
keep old ROM files in new distribution and be careful around romfile
property to load correct ROM file. Which is loaded actually just to
allocate the ROM with correct length.
Note, that romsize property doesn't really help: if we try to specify
it when default romfile is larger, it fails with something like:
romfile "efi-virtio.rom" (160768 bytes) is too large for ROM size 65536
Let's just ignore ROM file when romsize is specified and we are in
incoming migration state. In other words, we need only to preallocate
ROM of specified size, local ROM file is unrelated.
This way:
If romsize was specified on source, we just use same commandline as on
source, and migration will work independently of local ROM files on
target.
If romsize was not specified on source (and we have mismatching local
ROM file on target host), we have to specify romsize on target to match
source romsize. romfile parameter may be kept same as on source or may
be dropped, the file is not loaded anyway.
As a bonus we avoid extra reading from ROM file on target.
Note: when we don't have romsize parameter on source command line and
need it for target, it may be calculated as aligned up to power of two
size of ROM file on source (if we know, which file is it) or,
alternatively it may be retrieved from source QEMU by QMP qom-get
command, like
Note: we have extra initialization of size variable to zero in
pci_add_option_rom to avoid false-positive
"error: ‘size’ may be used uninitialized"
Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230522201740.88960-2-vsementsov@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prasad Pandit [Mon, 29 May 2023 11:43:33 +0000 (17:13 +0530)]
vhost: release virtqueue objects in error path
vhost_dev_start function does not release virtqueue objects when
event_notifier_init() function fails. Release virtqueue objects
and log a message about function failure.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-3-ppandit@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: f9a09ca3ea ("vhost: add support for configure interrupt") Reviewed-by: Peter Xu <peterx@redhat.com> Cc: qemu-stable@nongnu.org Acked-by: Jason Wang <jasowang@redhat.com>
Prasad Pandit [Mon, 29 May 2023 11:43:32 +0000 (17:13 +0530)]
vhost: release memory_listener object in error path
vhost_dev_start function does not release memory_listener object
in case of an error. This may crash the guest when vhost is unable
to set memory table:
Release memory_listener objects in the error path.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-2-ppandit@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Fixes: c471ad0e9b ("vhost_net: device IOTLB support") Cc: qemu-stable@nongnu.org Acked-by: Jason Wang <jasowang@redhat.com>
hw/virtio: Build various target-agnostic objects just once
The previous commit remove the unnecessary "virtio-access.h"
header. These files no longer have target-specific dependency.
Move them to the generic 'softmmu_ss' source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-11-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remove it.
Note, "virtio-access.h" is target-specific, so any file
including it also become tainted as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-10-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/virtio/virtio-iommu: Use target-agnostic qemu_target_page_mask()
In order to have virtio-iommu.c become target-agnostic,
we need to avoid using TARGET_PAGE_MASK. Get it with the
qemu_target_page_mask() helper.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230524093744.88442-9-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/virtio/vhost-vsock: Include missing 'virtio/virtio-bus.h' header
Instead of having "virtio/virtio-bus.h" implicitly included,
explicitly include it, to avoid when rearranging headers:
hw/virtio/vhost-vsock-common.c: In function ‘vhost_vsock_common_start’:
hw/virtio/vhost-vsock-common.c:51:5: error: unknown type name ‘VirtioBusClass’; did you mean ‘VirtioDeviceClass’?
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~
| VirtioDeviceClass
hw/virtio/vhost-vsock-common.c:51:25: error: implicit declaration of function ‘VIRTIO_BUS_GET_CLASS’; did you mean ‘VIRTIO_DEVICE_CLASS’? [-Werror=implicit-function-declaration]
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~~~~~~~
| VIRTIO_DEVICE_CLASS
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-8-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
hw/virtio/virtio-mem: Use qemu_ram_get_fd() helper
Avoid accessing RAMBlock internals, use the provided
qemu_ram_get_fd() getter to get the file descriptor.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-7-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/virtio: Introduce VHOST_VSOCK_COMMON symbol in Kconfig
Instead of adding 'vhost-vsock-common.c' twice (for VHOST_VSOCK
and VHOST_USER_VSOCK), have it depend on VHOST_VSOCK_COMMON,
selected by both symbols.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-6-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
hw/scsi: Rename target-specific source set as 'specific_virtio_scsi_ss'
Following the SCSI variable named '[specific_]scsi_ss', rename the
target-specific VirtIO/SCSI set prefixed with 'specific_'. This will
help when adding target-agnostic VirtIO/SCSI set in few commits.
No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-5-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
projects / thirdparty / qemu.git / log
