From 0de6a3339f1aadc1de2c9371435e3de239a00645 Mon Sep 17 00:00:00 2001 From: Giammarco Marzano Date: Wed, 14 Sep 2022 14:20:43 +0200 Subject: [PATCH] ipq40xx: Add ZTE MF289F It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano Reviewed-by: Lech Perczak (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter --- package/firmware/ipq-wifi/Makefile | 4 +- .../ipq-wifi/board-zte_mf289f.qca4019 | Bin 0 -> 24308 bytes .../ipq-wifi/board-zte_mf289f.qca9984 | Bin 0 -> 12204 bytes .../ipq40xx/base-files/etc/board.d/02_network | 5 + .../base-files/etc/board.d/03_gpio_switches | 3 +- .../base-files/lib/upgrade/platform.sh | 6 +- .../arch/arm/boot/dts/qcom-ipq4019-mf289f.dts | 438 ++++++++++++++++++ target/linux/ipq40xx/image/generic.mk | 15 +- 8 files changed, 465 insertions(+), 6 deletions(-) create mode 100644 package/firmware/ipq-wifi/board-zte_mf289f.qca4019 create mode 100644 package/firmware/ipq-wifi/board-zte_mf289f.qca9984 create mode 100644 target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf289f.dts diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index e76aa9235e0..da82e16dde1 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -38,7 +38,8 @@ ALLWIFIBOARDS:= \ qxwlan_e2600ac-c1 \ qxwlan_e2600ac-c2 \ sony_ncp-hg100-cellular \ - teltonika_rutx + teltonika_rutx \ + zte_mf289f ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD)) @@ -113,5 +114,6 @@ $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c1,Qxwlan E2600AC C1)) $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c2,Qxwlan E2600AC C2)) $(eval $(call generate-ipq-wifi-package,sony_ncp-hg100-cellular,Sony NCP-HG100/Cellular)) $(eval $(call generate-ipq-wifi-package,teltonika_rutx,Teltonika RUTX)) +$(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F)) $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE)))) diff --git a/package/firmware/ipq-wifi/board-zte_mf289f.qca4019 b/package/firmware/ipq-wifi/board-zte_mf289f.qca4019 new file mode 100644 index 0000000000000000000000000000000000000000..3a4cb8b888cc7e7282b064fce2c0d6e48f562702 GIT binary patch literal 24308 zc-rlpdsGuw9>;G&5bI)LLJ|?;5QgvwLV!SZkjPugBL$0!1Xu(rNK&J`!o$!7dwd{7 zM6ebN5wskXM^i+Oiw}s!+S+rJvw!R#d-j}dd-l;iXWg}3?Vfth?!w-gfQ>vbK=S z=G2S^Q%hhR0+WfgiKJt;YV5#4K?I11W&!(&*CbT`rk4+!e~+JH72WQwyS6|u@uCj7 zc?k~t>2_^wY^<%Vt;_&mX#B-n_v-2@a?=vx$l=Sn zrV3Ts_PEI5Zr#z^BE{Qr8-{zJSFA{md*d0lw#J1H zcTvS)9ti{LYRl4OaUpcT9ZzpCd`Wj4w(wS5@bD)vKuHI5!b8Q&t3(oaS;U|nV6;;Kk#JjkWL*0cfF-N_M9J5+_(p!R$3W^=F zJ8QGm!8sn=*2Udu*jKql;gik{{k*HnUq_tIoHKpEqzkzdSTol!66c zhvlM`;&g}53!RGQ*xL1F&iPkAE^YIxaw%}g0*EDvwash4SZ#+naM!GLUN=6S$IpQp zQZVQRlgVUIODik*Z+XQ8HW#Z?{T=VTw^f1*g>LZePPn?d5v~N0!df{w7(x7eq^2e( z5`+u%e*E#_cVlDJ$cGfUyP5L-^WE>iHP53m*V)=IS*-ukV?%~n{G&$?|7j}w(nlk` za6Ce#RrS4;QF+7!0{9l-IG@iG(5aK7BX1#jgoX2F+8+$Zun0T?3%~=g0`-BaL&xfy znx{KJI>C)OIc%IQX5VFFPPmiUNoJ4RV~%(v9x0Bz8;Ql^@#1({I3AA0;u2gUmfV$K zoA6EIO)`JnA0zQ6ZR^j^>^|v}S&PV>m+OE#JaE9Aac8l!EDDc$5QQb+3E~7 z$r{Xs{iftiEQ!5QvJneoubc!V=QN)0zh%CZ&Wq`7yf%r&+CYCv#EbH18jGZ33=5ZA zV#qS`wFCF)v|QUhaBpfV_Vw}c@%9o5@WtuD#M|4;WAS?4i`!f5pU-fB0f%oz)c^zl z4-Nn>(1i8?5ca0DfgJz{g3l+Wa0=#6&n1YACLxfL4DiE#0J2tKfXQX9%7Cf8Jp;`Z zzG95`*>af7-JswYJiRknD?fysgG_E8ge)XamI_a5g7qQrRkvZeUl+3*P(`P#kSBziG<}cUd!x`gXe4H=l%Qzrg@xbske8# z!(gz3Qpy`>^*6U2F0x>1Q%$$Q1>p6-XY@rRe`$LA%TqI^=*#1}yREIIG%#r17X>VxfS(Vn27qnw1g&;t zf(yT8&~}8fZy2Cl$OPTJOwjW^6WklL0uQ7tU^m19VVkW1#g{Ez)XnUnd-K)Xf7Ne1r7zW_$o;;$YSif~ zHJNhKctw9&Qz(xi-HrW*4y{HhC;8NG!EW62^r8Zq^lHrxxp=hCa8kQpnJgy_1NwHQ zQl3cq7=NvA)TrcINeK*S((IiK z7#{Hyfzca=v)WQv?;FNG!$;amrCcsG7_~ZON$eIcN4kY~mFcD~8Ao83Mz0!l`h!}P za*Oej;k>>U1}7S>Yg?41v9Vsx#zFlDbeCMHfSb3xL;&t;o8g3Bt<8d6((4av3pH}X zC4HMx6&peNjb1mL*H$QZl1`=okq5O8jrs%HJWV3pcvf4k+$#5j9cj_1>dTZ-v1{po+i)My z#RLjK0Vn`n?<1BE&Hei>gq`xOaV|Y)_@yrTglFa2eI=)34v7k#a%^L6cH|!4ta013 zMt-ip^SRN<5c>3c6VRdN8$Bem22{~ zy2Qf)CET5>w_NSYY1~vLc$b_0*;P$=1Ds`0G#$N8( z^#S?5i;A1sX;8F9pAe|AtgfD7z4S0qXfGdVE2@vG^ilDW?|c$p=TosZ&wgiD-=6lE zM&SWYUUT=pvthL!<(%vbEsB~@wf7!}gwBim&x9OuE8=9H>B?@2sB@-fhWh(zvPgUS=^O6uLilzg zTm^2fu7qm}STs-HKze(`tHyKn_LkPYBlYYH@jSh~(DaBGKHrH_D^rhnadJd?%O`K~ ze?kL*2OH2@`wlw*gtpLDQ#$+ru&P5;OQrBVqHv}*x_9He>WrHLi^2cs$q zj}#nLC9aE0$d4*0tT>oom>3-$8y8hto>zLTw5(9M#yR4d*A|;EFDi_xkgE>LkCY`I zFDr~v7Kswp7b%q(>LYk9t^0Oj7(X_vQp>0NUh+qPgIoa0cL&oU=mIQyAIuCg3ovmY zCMM?Z-+hOP1q%R#Fxjpw0hlemadl{|J<<80tycgr>;-9jm@*{|0G>?%uom?An0p|c zwm2FKvDLUIIDg&~NHMFpj!fXvFPJNQeSN2> zpP%0peMNX8fHwqi3TB_@7=oMNCj2-EZn)vb{KT-W%!7H3^=JrQb6T6);B@i%u)yK( zfflEj<5S|_W3GZ>KXrxrma_Ubzzy)>zw8k)u$75927gC=LuJ|6IWPwvrtC2(P{Q~* zP)RAN8pck8-BdSa_yhwU7>2Vw(9h$ApJ5Cnxdj^SZ+`nVZGR2>P_}DOfb^QveV4&h zI0C?YDMi8zmVS0^%SE;MipKWur z7OsWXuf9_FEwuy2*+#YlN@x7eDCsF_?xE|N<{ny^tWJoGT(yEE=chH@{SYKUq>w4Z zI&vLRQhvOq?xW_@=bkr!*oNz`WbjG8kbjR)1dsv3011!e5zEL_GF6y*FO}FvZWC^k zY$7)iTS*Zq5{mALhz;Zh;RZ=G8BHXRj=uGmrZ*j9a_Z4-&dT&9eINM}%gN=!<&w?h z=0}@}3^GHQA&DVl9>owF$&JE|66?%6mriMZ@RE751YC*YDJzjX>!EWp{Y{rmA>;}#N4U-K($vE{{%s!(|!UT44W_M zs#IAr(fDmsucls+j|jI-otkQeOd5*_21Jm_;v9s@F_S^3R%OfLEO!iFXf%og(iEDi z)2Iq%$&=$IqweRb{j&8m;bWR$9?^HI>lKHjY35tBCEvF-(KM>>t*Vz7ZA~}b)^(_= zWmyU9m>ybxfe6DW?exvB&K1#QQfFeO4A(#%dp{+rbe+_ zy4E~y=+`u>l(L_o!5K9Tiv7}f%ZQ;9O+>ad)<)2R@e$KyU2RpaJlT8)5t>wo<(nLY2e-{e{YmvcMY3fa<*ifY%F`_)rapa(`lv#RT0cjvISPi* z)T-6GHxq7xo8Tt6_xo=YaQyj=$;<6k-VB@?%^wtZtv>7bVV(J>-7#lKHBmA+Qquo! zM`Y9TD&zIyFSh7cHY_VQ-8nJz?&ZKbLe(*Jq*r`4yx#9;C$H@8jBXCB<`oa!DDT

pL%$l{V~joX)(O6{c6e7`#2G=2cX6F1sWY^hSK(FI_+{#+D;fkP z-uuT!lFo*yeGhwQ_fJ$@-*!2;iC=lzlHReRNl@mUcXxE-*^pX7u~63WRdIK8Q$VGU zynUkdrnEo$qTr<3EWQw2w^*@och5+1pRmQhdQtxAn|XcWwt$n154oQpH{AH~g2VOn zTI56cE?Mfo{H6k6-H(>&0j)@A^x?Em1GM-#B#SWu2>^|FBkqsk zNdER5Tpz8MeFR@~+. +// Copyright (c) 2022, Giammarco Marzano . + +#include "qcom-ipq4019.dtsi" +#include +#include +#include +#include + +/ { + model = "ZTE MF289F"; + compatible = "zte,mf289f"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + chosen { + /* + * bootargs forced by u-boot bootipq command: + * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait' + */ + bootargs-append = " root=/dev/ubiblock0_1"; + }; + + /* + * This node is used to restart modem module to avoid anomalous + * behaviours on initial communication. + */ + gpio-restart { + compatible = "gpio-restart"; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + + led_status: led-0 { + label = "blue:power"; + function = LED_FUNCTION_POWER; + color = ; + gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; + }; + + led-1 { + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + linux,code = ; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + }; + + key-wps { + label = "wps"; + linux,code = ; + gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; + }; + }; + + soc { + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; +}; + +&prng { + status = "okay"; +}; + +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; +}; + +&watchdog { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, + <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "0:MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "0:QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "0:CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "0:APPSBL"; + reg = <0xf0000 0xc0000>; + read-only; + }; + + partition@1b0000 { + label = "0:reserved1"; + reg = <0x1b0000 0x50000>; + read-only; + }; + }; + }; + + spi-nand@1 { /* flash@1 ? */ + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fota-flag"; + reg = <0x0 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "ART"; + reg = <0xa0000 0x80000>; + read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + }; + + partition@120000 { + label = "mac"; + reg = <0x120000 0x80000>; + read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_mac_0: macaddr@0 { + reg = <0x0 0x6>; + }; + }; + + partition@1a0000 { + label = "reserved2"; + reg = <0x1a0000 0xc0000>; + read-only; + }; + + partition@260000 { + label = "cfg-param"; + reg = <0x260000 0x400000>; + read-only; + }; + + partition@660000 { + label = "log"; + reg = <0x660000 0x400000>; + }; + + partition@a60000 { + label = "oops"; + reg = <0xa60000 0xa0000>; + }; + + partition@b00000 { + label = "reserved3"; + reg = <0xb00000 0x500000>; + read-only; + }; + + partition@1000000 { + label = "web"; + reg = <0x1000000 0x800000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0x1d00000>; + }; + + partition@3500000 { + label = "data"; + reg = <0x3500000 0x1900000>; + }; + + partition@4e00000 { + label = "fota"; + reg = <0x4e00000 0x3200000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_mac_0>; +}; + +&gmac1 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_mac_0>; + mac-address-increment = <1>; +}; + + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + i2c_0_pins: i2c_0_pinmux { + mux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + }; + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio12", "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + nvmem-cell-names = "pre-calibration", "mac-address"; + nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>; + mac-address-increment = <2>; + qcom,ath10k-calibration-variant = "zte,mf289f"; +}; + +/* This node is used only on AT2 version for 5Ghz on IPQ4019 with board-id=21 */ +&wifi1 { + status = "okay"; + nvmem-cell-names = "pre-calibration", "mac-address"; + nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>; + mac-address-increment = <3>; + qcom,ath10k-calibration-variant = "zte,mf289f"; +}; + +/* This node is used only on AT1 version for 5Ghz on QCA9984 */ +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>; + clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_mac_0>; + mac-address-increment = <4>; + compatible = "qcom,ath10k"; + reg = <0x00010000 0 0 0 0>; + qcom,ath10k-calibration-variant = "zte,mf289f"; + }; + }; +}; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 43244a914cd..81cc83e28fc 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -1060,10 +1060,9 @@ define Device/unielec_u4019-32m endef TARGET_DEVICES += unielec_u4019-32m -define Device/zte_mf286d +define Device/zte_mf28x_common $(call Device/FitzImage) DEVICE_VENDOR := ZTE - DEVICE_MODEL := MF286D SOC := qcom-ipq4019 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1 BLOCKSIZE := 128k @@ -1071,8 +1070,20 @@ define Device/zte_mf286d KERNEL_IN_UBI := 1 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi endef + +define Device/zte_mf286d + $(call Device/zte_mf28x_common) + DEVICE_MODEL := MF286D +endef TARGET_DEVICES += zte_mf286d +define Device/zte_mf289f + $(call Device/zte_mf28x_common) + DEVICE_MODEL := MF289F + DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct +endef +TARGET_DEVICES += zte_mf289f + define Device/zyxel_nbg6617 $(call Device/FitImageLzma) DEVICE_VENDOR := ZyXEL -- 2.47.2