From 14ece61178f4e604d62de1bc1cb15aa2013d6338 Mon Sep 17 00:00:00 2001 From: Beiyan Yun Date: Sat, 1 Nov 2025 20:31:35 +0800 Subject: [PATCH] net: phy: aquantia: use generic firmware loader Aquantia PHYs are being used w/o SPI flash in some routers recently. Current firmware loader only attempts to load from FS on top of MMC, limiting the use on many devices. Removed the old firmware loader, migrate to generic script based firmware loader to allow a wider range and runtime override of firmware source. (e.g., MMC, USB, UBIFS). Tested on Buffalo WXR18000BE10P with UBIFS. Signed-off-by: Beiyan Yun --- drivers/net/phy/Kconfig | 23 ++++++------ drivers/net/phy/aquantia.c | 76 ++++++++++++++------------------------ 2 files changed, 39 insertions(+), 60 deletions(-) diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 57803ab5c59..d0aab0b8fe8 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -91,23 +91,22 @@ menuconfig PHY_AQUANTIA config PHY_AQUANTIA_UPLOAD_FW bool "Aquantia firmware loading support" depends on PHY_AQUANTIA + select FW_LOADER help - Aquantia PHYs use firmware which can be either loaded automatically - from storage directly attached to the phy or loaded by the boot loader - via MDIO commands. The firmware is loaded from a file, specified by - the PHY_AQUANTIA_FW_PART and PHY_AQUANTIA_FW_NAME options. + Aquantia PHYs use firmware which can be either loaded automatically + from storage directly attached to the phy or loaded by the boot loader + via MDIO commands. -config PHY_AQUANTIA_FW_PART - string "Aquantia firmware partition" - depends on PHY_AQUANTIA_UPLOAD_FW - help - Partition containing the firmware file. + This option enables loading the firmware using the generic + firmware loader framework. -config PHY_AQUANTIA_FW_NAME - string "Aquantia firmware filename" +config PHY_AQUANTIA_FW_MAX_SIZE + hex "Max firmware size" depends on PHY_AQUANTIA_UPLOAD_FW + default 0x80000 help - Firmware filename. + The maximum size of the Aquantia PHY firmware. This is used to + allocate a buffer to load the firmware into. config PHY_ATHEROS bool "Atheros Ethernet PHYs support" diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c index fc2476fb038..e0deef58f52 100644 --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -16,7 +16,9 @@ #include #include #include -#include +#if (IS_ENABLED(CONFIG_PHY_AQUANTIA_UPLOAD_FW)) +#include +#endif #define AQUNTIA_10G_CTL 0x20 #define AQUNTIA_VENDOR_P1 0xc400 @@ -127,52 +129,29 @@ struct fw_header { #pragma pack() -#if defined(CONFIG_PHY_AQUANTIA_UPLOAD_FW) -static int aquantia_read_fw(u8 **fw_addr, size_t *fw_length) +#if (IS_ENABLED(CONFIG_PHY_AQUANTIA_UPLOAD_FW)) +int __weak aquantia_read_fw(struct phy_device *phydev, + u8 **fw_addr, size_t *fw_length) { - loff_t length, read; int ret; - void *addr = NULL; - - *fw_addr = NULL; - *fw_length = 0; - debug("Loading Aquantia microcode from %s %s\n", - CONFIG_PHY_AQUANTIA_FW_PART, CONFIG_PHY_AQUANTIA_FW_NAME); - ret = fs_set_blk_dev("mmc", CONFIG_PHY_AQUANTIA_FW_PART, FS_TYPE_ANY); - if (ret < 0) - goto cleanup; - - ret = fs_size(CONFIG_PHY_AQUANTIA_FW_NAME, &length); - if (ret < 0) - goto cleanup; - - addr = malloc(length); - if (!addr) { - ret = -ENOMEM; - goto cleanup; - } - - ret = fs_set_blk_dev("mmc", CONFIG_PHY_AQUANTIA_FW_PART, FS_TYPE_ANY); - if (ret < 0) - goto cleanup; - - ret = fs_read(CONFIG_PHY_AQUANTIA_FW_NAME, (ulong)addr, 0, length, - &read); - if (ret < 0) - goto cleanup; + u8 *microcode; - *fw_addr = addr; - *fw_length = length; - debug("Found Aquantia microcode.\n"); + microcode = malloc(CONFIG_PHY_AQUANTIA_FW_MAX_SIZE); + if (!microcode) { + printf("Failed to allocate memory for firmware\n"); + return -ENOMEM; + } -cleanup: - if (ret < 0) { - printf("loading firmware file %s %s failed with error %d\n", - CONFIG_PHY_AQUANTIA_FW_PART, - CONFIG_PHY_AQUANTIA_FW_NAME, ret); - free(addr); + ret = request_firmware_into_buf_via_script( + microcode, CONFIG_PHY_AQUANTIA_FW_MAX_SIZE, + "aqr_phy_load_firmware", fw_length); + if (ret) { + free(microcode); + return ret; } - return ret; + + *fw_addr = microcode; + return 1; } /* load data into the phy's memory */ @@ -293,16 +272,17 @@ static int aquantia_do_upload_firmware(struct phy_device *phydev, static int aquantia_upload_firmware(struct phy_device *phydev) { - int ret; + int ret, fwrc; u8 *addr = NULL; - size_t fw_length = 0; + size_t fw_length; - ret = aquantia_read_fw(&addr, &fw_length); - if (ret != 0) - return ret; + fwrc = aquantia_read_fw(phydev, &addr, &fw_length); + if (fwrc < 0) + return fwrc; ret = aquantia_do_upload_firmware(phydev, addr, fw_length); - free(addr); + if (fwrc > 0) + free(addr); return ret; } -- 2.47.3