From 1ef28ee5c51f21bc3ff493dfdc175827bbabf195 Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Sun, 30 Nov 2025 00:22:39 +0100 Subject: [PATCH] arm64: dts: qcom: oneplus-enchilada: Specify i2c4 clock frequency Per the binding, omitting the clock frequency from a Geni I2C controller node defaults the bus to 100 kHz. But at least in Linux, a friendly info print highlights the lack of explicitly defined frequency in the DeviceTree. Specify the frequency, to give it an explicit value, and to silence the log print in Linux. Downstream doesn't define any frequency, thus also using 100 kHz. Signed-off-by: David Heidelberg Link: https://lore.kernel.org/r/20251130-enchilada-i2c-freq-v1-1-2932480a0261@ixit.cz Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index dcaea15c6d433..c7e5268cc3fab 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -45,6 +45,8 @@ }; &i2c4 { + clock-frequency = <100000>; + status = "okay"; max98927_codec: max98927@3a { -- 2.47.3