From 2b03d9a40cd1fea42fd65d2b66df80edc0f374c8 Mon Sep 17 00:00:00 2001 From: Jonas Jelonek Date: Sat, 27 Dec 2025 18:01:34 +0000 Subject: [PATCH] gpio: add gpio-line-mux driver Add a new driver which provides a 1-to-many mapping for a single real GPIO using a multiplexer. Each virtual GPIO corresponds to a multiplexer state which, if set for the multiplexer, connects the real GPIO to the corresponding virtual GPIO. This can help in various usecases. One practical case is the special hardware design of the Realtek-based XS1930-10 switch from Zyxel. It features two SFP+ ports/cages whose signals are wired directly to the switch SoC. Although Realtek SoCs are short on GPIOs, there are usually enough the fit the SFP signals without any hacks. However, Zyxel did some weird design and connected RX_LOS, MOD_ABS and TX_FAULT of one SFP cage onto a single GPIO line controlled by a multiplexer (the same for the other SFP cage). The single multiplexer controls the lines for both SFP and depending on the state, the designated 'signal GPIO lines' are connected to one of the three SFP signals. Because the SFP core/driver doesn't support multiplexer but needs single GPIOs for each of the signals, this driver fills the gap between both. It registers a gpio_chip, provides multiple virtual GPIOs and sets the backing multiplexer accordingly. Due to several practical issues, this is input-only and doesn't support IRQs. Signed-off-by: Jonas Jelonek Reviewed-by: Thomas Richard Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20251227180134.1262138-3-jelonek.jonas@gmail.com Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 6 ++ drivers/gpio/Kconfig | 9 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-line-mux.c | 126 +++++++++++++++++++++++++++++++++++ 4 files changed, 142 insertions(+) create mode 100644 drivers/gpio/gpio-line-mux.c diff --git a/MAINTAINERS b/MAINTAINERS index 5b11839cba9de..8056ef0ffbf02 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10774,6 +10774,12 @@ S: Maintained F: Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml F: drivers/media/rc/gpio-ir-tx.c +GPIO LINE MUX +M: Jonas Jelonek +S: Maintained +F: Documentation/devicetree/bindings/gpio/gpio-line-mux.yaml +F: drivers/gpio/gpio-line-mux.c + GPIO MOCKUP DRIVER M: Bamvor Jian Zhang L: linux-gpio@vger.kernel.org diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index c33f9305ab977..2efa58f107812 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1994,6 +1994,15 @@ config GPIO_LATCH Say yes here to enable a driver for GPIO multiplexers based on latches connected to other GPIOs. +config GPIO_LINE_MUX + tristate "GPIO line mux driver" + depends on OF_GPIO + select MULTIPLEXER + help + Say Y here to support the GPIO line mux, which can provide virtual + GPIOs backed by a shared real GPIO and a multiplexer in a 1-to-many + fashion. + config GPIO_MOCKUP tristate "GPIO Testing Driver (DEPRECATED)" select IRQ_SIM diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 2421a8fd3733e..36fa7c52d2408 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o +obj-$(CONFIG_GPIO_LINE_MUX) += gpio-line-mux.o obj-$(CONFIG_GPIO_LJCA) += gpio-ljca.o obj-$(CONFIG_GPIO_LOGICVC) += gpio-logicvc.o obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o diff --git a/drivers/gpio/gpio-line-mux.c b/drivers/gpio/gpio-line-mux.c new file mode 100644 index 0000000000000..a4f3843062182 --- /dev/null +++ b/drivers/gpio/gpio-line-mux.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * GPIO line mux which acts as virtual gpiochip and provides a 1-to-many + * mapping between virtual GPIOs and a real GPIO + multiplexer. + * + * Copyright (c) 2025 Jonas Jelonek + */ + +#include +#include +#include +#include +#include +#include + +#define MUX_SELECT_DELAY_US 100 + +struct gpio_lmux { + struct gpio_chip gc; + struct mux_control *mux; + struct gpio_desc *muxed_gpio; + + u32 num_gpio_mux_states; + unsigned int gpio_mux_states[] __counted_by(num_gpio_mux_states); +}; + +static int gpio_lmux_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct gpio_lmux *glm = gpiochip_get_data(gc); + int ret; + + if (offset > gc->ngpio) + return -EINVAL; + + ret = mux_control_select_delay(glm->mux, glm->gpio_mux_states[offset], + MUX_SELECT_DELAY_US); + if (ret < 0) + return ret; + + ret = gpiod_get_raw_value_cansleep(glm->muxed_gpio); + mux_control_deselect(glm->mux); + return ret; +} + +static int gpio_lmux_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + return -EOPNOTSUPP; +} + +static int gpio_lmux_gpio_get_direction(struct gpio_chip *gc, + unsigned int offset) +{ + return GPIO_LINE_DIRECTION_IN; +} + +static int gpio_lmux_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_lmux *glm; + unsigned int ngpio; + size_t size; + int ret; + + ngpio = device_property_count_u32(dev, "gpio-line-mux-states"); + if (!ngpio) + return -EINVAL; + + size = struct_size(glm, gpio_mux_states, ngpio); + glm = devm_kzalloc(dev, size, GFP_KERNEL); + if (!glm) + return -ENOMEM; + + glm->gc.base = -1; + glm->gc.can_sleep = true; + glm->gc.fwnode = dev_fwnode(dev); + glm->gc.label = dev_name(dev); + glm->gc.ngpio = ngpio; + glm->gc.owner = THIS_MODULE; + glm->gc.parent = dev; + + glm->gc.get = gpio_lmux_gpio_get; + glm->gc.set = gpio_lmux_gpio_set; + glm->gc.get_direction = gpio_lmux_gpio_get_direction; + + glm->mux = devm_mux_control_get(dev, NULL); + if (IS_ERR(glm->mux)) + return dev_err_probe(dev, PTR_ERR(glm->mux), + "could not get mux controller\n"); + + glm->muxed_gpio = devm_gpiod_get(dev, "muxed", GPIOD_IN); + if (IS_ERR(glm->muxed_gpio)) + return dev_err_probe(dev, PTR_ERR(glm->muxed_gpio), + "could not get muxed-gpio\n"); + + glm->num_gpio_mux_states = ngpio; + ret = device_property_read_u32_array(dev, "gpio-line-mux-states", + &glm->gpio_mux_states[0], ngpio); + if (ret) + return dev_err_probe(dev, ret, "could not get mux states\n"); + + ret = devm_gpiochip_add_data(dev, &glm->gc, glm); + if (ret) + return dev_err_probe(dev, ret, "failed to add gpiochip\n"); + + return 0; +} + +static const struct of_device_id gpio_lmux_of_match[] = { + { .compatible = "gpio-line-mux" }, + { } +}; +MODULE_DEVICE_TABLE(of, gpio_lmux_of_match); + +static struct platform_driver gpio_lmux_driver = { + .driver = { + .name = "gpio-line-mux", + .of_match_table = gpio_lmux_of_match, + }, + .probe = gpio_lmux_probe, +}; +module_platform_driver(gpio_lmux_driver); + +MODULE_AUTHOR("Jonas Jelonek "); +MODULE_DESCRIPTION("GPIO line mux driver"); +MODULE_LICENSE("GPL"); -- 2.47.3