From 30009a21f257a02feea7a7708ef3d0118e7f824a Mon Sep 17 00:00:00 2001
From: Huan He <hehuan1@eswincomputing.com>
Date: Sun, 19 Oct 2025 19:52:38 +0800
Subject: [PATCH] dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin EIC7700

EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.

Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 .../bindings/mmc/snps,dwcmshc-sdhci.yaml      | 57 +++++++++++++++++--
 1 file changed, 51 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index f882219a0a26a..7e7c55dc24403 100644
--- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -30,6 +30,7 @@ properties:
           - sophgo,sg2002-dwcmshc
           - sophgo,sg2042-dwcmshc
           - thead,th1520-dwcmshc
+          - eswin,eic7700-dwcmshc
 
   reg:
     maxItems: 1
@@ -52,17 +53,30 @@ properties:
     maxItems: 5
 
   reset-names:
-    items:
-      - const: core
-      - const: bus
-      - const: axi
-      - const: block
-      - const: timer
+    maxItems: 5
 
   rockchip,txclk-tapnum:
     description: Specify the number of delay for tx sampling.
     $ref: /schemas/types.yaml#/definitions/uint8
 
+  eswin,hsp-sp-csr:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to HSP(High-Speed Peripheral) device
+          - description: Offset of the stability status register for internal
+                         clock.
+          - description: Offset of the stability register for host regulator
+                         voltage.
+    description:
+      HSP CSR is to control and get status of different high-speed peripherals
+      (such as Ethernet, USB, SATA, etc.) via register, which can tune
+      board-level's parameters of PHY, etc.
+
+  eswin,drive-impedance-ohms:
+    description: Specifies the drive impedance in Ohm.
+    enum: [33, 40, 50, 66, 100]
+
 required:
   - compatible
   - reg
@@ -110,6 +124,37 @@ allOf:
             - const: block
             - const: timer
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: eswin,eic7700-dwcmshc
+    then:
+      properties:
+        resets:
+          minItems: 4
+          maxItems: 4
+        reset-names:
+          items:
+            - const: axi
+            - const: phy
+            - const: prstn
+            - const: txrx
+      required:
+        - eswin,hsp-sp-csr
+        - eswin,drive-impedance-ohms
+    else:
+      properties:
+        resets:
+          maxItems: 5
+        reset-names:
+          items:
+            - const: core
+            - const: bus
+            - const: axi
+            - const: block
+            - const: timer
+
   - if:
       properties:
         compatible:
-- 
2.47.3