From 3a39f682df5d064ffe2d56cf21bdf77abe2bd301 Mon Sep 17 00:00:00 2001 From: Mikhail Zhilkin Date: Mon, 9 Feb 2026 22:27:10 +0300 Subject: [PATCH] qualcommax: ipq50xx: add support for CMCC MR3000D-CI CMCC MR3000D-CI is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on IPQ5000. Device specification -------------------- - SoC : Qualcomm IPQ5018 - RAM : 512 MiB DDR3L - Flash : 128 MiB SPI-NAND (GigaDevice GD5F1GQ5REYIG) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : Qualcomm IPQ5018 (SoC) - 5 GHz : Qualcomm Atheros QCN6102 - Ethernet : 4x 10/100/1000 Mbps - Switch : Qualcomm Atheros QCA8337 - LEDs/Keys (GPIO) : 2x LEDs, 2x Buttons - UART : Through-hole on PCB - Voltage : 3.3 V - Assignment : Silkscreened on PCB - Settings : 115200n8 - Power : 12 VDC, 1.5 A Installation ----------------- 1. Telnet method a. Enable telnet Log in to http://192.168.10.1/ with the password on the sticker Modify URL according to example (keep your unique hash after ";stok=") and press Enter: http://192.168.10.1/cgi-bin/luci/;stok=78becad1b1490e45be2776025cde2b7d/api/NPCnetwork/ping?url=$(telnetd) You should get the following in the browser: {"link":0} b. Run tftp server on IP 192.168.10.254 and put factory image 'openwrt-qualcommax-ipq50xx-cmcc_mr3000d-ci-squashfs-factory.ubi' in the tftp root dir. c. Login to 192.168.10.1 with telnet (user: root, pass: from the sticker). d. Download factory image from the tftp: tftp -l factory.ubi -r openwrt-qualcommax-ipq50xx-cmcc_mr3000d-ci-squashfs-factory.ubi -g 192.168.10.254 e. Flash factory image: export rootfs=$(cat /proc/mtd | grep rootfs | grep -v _ | cut -d: -f1) ubidetach -f -p /dev/${rootfs} ubiformat /dev/${rootfs} -y -f /tmp/factory.ubi f. Reboot: reboot 2. U-Boot Method using UBI Image (using UART) a. Place the factory.ubi file on your TFTP server, enter U-Boot CLI and exec these commands: tftpboot :factory.ubi flash rootfs reset 3. U-Boot Method using initramfs Image (using UART) a. Place the openwrt-*-initramfs-fit-uImage.itb file on your TFTP server and rename it to initramfs.bin b. Enable serial console, enter to U-Boot CLI and exec these commands: tftpboot :initramfs.bin bootm c. Once boot completed, upload the sysupgrade.bin file to router's /tmp directory (using scp or wget) and execute the following command in openwrt shell: sysupgrade -n /tmp/sysupgrade.bin MAC Addresses ------------- +--------------+-------------------+-------------+ | Interface | MAC example | Location | +--------------+-------------------+-------------+ | LAN | 84:7a:xx:xx:xx:dd | 0:ART, 0x6 | | WAN (label) | 84:7a:xx:xx:xx:dc | 0:ART, 0x0 | | WLAN 2.4 GHz | 84:7a:xx:xx:xx:de | 0:ART, 0xc | | WLAN 5 | 84:7a:xx:xx:xx:df | 0:ART, 0x12 | +--------------+-------------------+-------------+ Notes ----- 1. U-Boot is protected by a password (pass: netpower). Signed-off-by: Mikhail Zhilkin Link: https://github.com/openwrt/openwrt/pull/21952 Signed-off-by: Robert Marko --- .../uboot-envtools/files/qualcommax_ipq50xx | 1 + package/firmware/ipq-wifi/Makefile | 2 + .../boot/dts/qcom/ipq5018-mr3000d-ci.dts | 424 ++++++++++++++++++ target/linux/qualcommax/image/ipq50xx.mk | 16 + .../ipq50xx/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/firmware/11-ath11k-caldata | 14 + .../base-files/lib/upgrade/platform.sh | 1 + 7 files changed, 459 insertions(+) create mode 100644 target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr3000d-ci.dts diff --git a/package/boot/uboot-tools/uboot-envtools/files/qualcommax_ipq50xx b/package/boot/uboot-tools/uboot-envtools/files/qualcommax_ipq50xx index 6366859fc33..d825f885dd5 100644 --- a/package/boot/uboot-tools/uboot-envtools/files/qualcommax_ipq50xx +++ b/package/boot/uboot-tools/uboot-envtools/files/qualcommax_ipq50xx @@ -8,6 +8,7 @@ touch /etc/config/ubootenv board=$(board_name) case "$board" in +cmcc,mr3000d-ci|\ cmcc,pz-l8|\ elecom,wrc-x3000gs2|\ iodata,wn-dax3000gr|\ diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index f2543a921b4..1cdaaf93cb5 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -35,6 +35,7 @@ ALLWIFIBOARDS:= \ asus_rt-ax89x \ buffalo_wxr-5950ax12 \ cambiumnetworks_xe34 \ + cmcc_mr3000d-ci \ cmcc_rm2-6 \ compex_wpq873 \ dynalink_dl-wrx36 \ @@ -226,6 +227,7 @@ $(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000)) $(eval $(call generate-ipq-wifi-package,asus_rt-ax89x,Asus RT-AX89X)) $(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12)) $(eval $(call generate-ipq-wifi-package,cambiumnetworks_xe34,Cambium Networks XE3-4)) +$(eval $(call generate-ipq-wifi-package,cmcc_mr3000d-ci,CMCC MR3000D-CI)) $(eval $(call generate-ipq-wifi-package,cmcc_rm2-6,CMCC RM2-6)) $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873)) $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36)) diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr3000d-ci.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr3000d-ci.dts new file mode 100644 index 00000000000..a03f9de657c --- /dev/null +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr3000d-ci.dts @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "ipq5018.dtsi" +#include "ipq5018-ess.dtsi" +#include "ipq5018-qcn6122.dtsi" + +#include +#include +#include + +/ { + model = "CMCC MR3000D-CI"; + compatible = "cmcc,mr3000d-ci", "qcom,ipq5018"; + + aliases { + label-mac-device = <&dp1>; + + led-boot = &led_status_red; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_green; + + serial0 = &blsp1_uart1; + }; + + chosen { + bootargs-append = " root=/dev/ubiblock0_1 swiotlb=1 coherent_pool=2M"; + stdout-path = "serial0:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button-0 { + label = "reset"; + gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-1 { + label = "wps"; + gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led_status_red: led-0 { + gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led_status_green: led-1 { + gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board_clk { + clock-div = <4>; + clock-mult = <1>; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; +}; + +&crypto { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&qfprom { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "okay"; + + // GigaDevice GD5F1GQ5REYIG + nand@0 { + compatible = "spi-nand"; + reg = <0>; + + nand-ecc-engine = <&qpic_nand>; + nand-ecc-step-size = <512>; + nand-ecc-strength = <8>; + nand-bus-width = <8>; + + partitions { + compatible = "qcom,smem-part"; + + partition-art { + label = "0:art"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + // WAN MAC address + macaddr_art_0: mac-address@0 { + compatible = "mac-base"; + reg = <0x0 0x6>; + #nvmem-cell-cells = <1>; + }; + + // LAN MAC address + macaddr_art_6: mac-address@6 { + compatible = "mac-base"; + reg = <0x6 0x6>; + #nvmem-cell-cells = <1>; + }; + + // WLAN 2.4 GHz MAC address + macaddr_art_c: mac-address@c { + compatible = "mac-base"; + reg = <0xc 0x6>; + #nvmem-cell-cells = <1>; + }; + + // WLAN 5 GHz MAC address + macaddr_art_12: mac-address@12 { + compatible = "mac-base"; + reg = <0x12 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; +}; + +/* + * =============================================================== + * _______________________ _______________________ + * | IPQ5018 | | QCA8337 | + * | +------+ +--------+ | | +--------+ +------+ | + * | | MAC0 |---| GE Phy | | | | Phy0 |---| MAC1 | | + * | +------+ +--------+ | | +--------+ +------+ | + * | +------+ +--------+ | | +--------+ +------+ | + * | | MAC1 |---| Uniphy |-+-SGMII-+-| SerDes |---| MAC6 | | + * | +------+ +--------+ | | +--------+ +------+ | + * |_______________________| |_______________________| + * + * =============================================================== + */ + +&switch { + status = "okay"; + + switch_mac_mode = ; + + qcom,port_phyinfo { + // MAC0 -> GE Phy -> QCA8337 Phy4 + port@1 { + port_id = <1>; + mdiobus = <&mdio0>; + phy_address = <7>; + }; + + // MAC1 ---SGMII---> QCA8337 SerDes + port@2 { + port_id = <2>; + mdiobus = <&mdio1>; + forced-speed = <1000>; + forced-duplex = <1>; + }; + }; +}; + +// MAC0 -> GE Phy +&dp1 { + status = "okay"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_art_0 (0)>; +}; + +// MAC1 -> SGMII +&dp2 { + status = "okay"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_art_6 (0)>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&mdio0 { + status = "okay"; +}; + +// MAC0 -> GE Phy -> QCA8337 Phy4 +&ge_phy { + qcom,dac-preset-short-cable; +}; + +&mdio1 { + status = "okay"; + + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + + // QCA8337 Phy0 -> LAN3 + qca8337_0: ethernet-phy@0 { + reg = <0>; + }; + + // QCA8337 Phy1 -> LAN2 + qca8337_1: ethernet-phy@1 { + reg = <1>; + }; + + // QCA8337 Phy2 -> LAN1 + qca8337_2: ethernet-phy@2 { + reg = <2>; + }; + + // QCA8337 Phy3 -> WAN + qca8337_3: ethernet-phy@3 { + reg = <3>; + }; + + // QCA8337 Phy4 -> IPQ5018 GE Phy + qca8337_4: ethernet-phy@4 { + reg = <4>; + }; + + // QCA8337 switch + switch1: ethernet-switch@17 { + compatible = "qca,qca8337"; + reg = <17>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&qca8337_0>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&qca8337_1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&qca8337_2>; + }; + + port@4 { + reg = <4>; + label = "wan"; + phy-handle = <&qca8337_3>; + + nvmem-cells = <&macaddr_art_0 (0)>; + nvmem-cell-names = "mac-address"; + }; + + port@6 { + reg = <6>; + phy-mode = "sgmii"; + ethernet = <&dp2>; + qca,sgmii-enable-pll; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&tlmm { + button_pins: button-state { + button-pins { + pins = "gpio27", "gpio38"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + }; + + led_pins: led-state { + pins = "gpio30", "gpio46"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + mdio1_pins: mdio-state { + mdc-pins { + pins = "gpio36"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio37"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + qpic_pins: qpic-state { + clock-pins { + pins = "gpio9"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + + cs-pins { + pins = "gpio8"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "qspi_data"; + drive-strength = <8>; + bias-disable; + }; + }; + + serial_0_pins: uart0-state { + pins = "gpio28", "gpio29"; + function = "blsp0_uart1"; + drive-strength = <8>; + bias-disable; + }; + + switch_reset_pins: switch-reset-state { + pins = "gpio39"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; +}; + +&q6v5_wcss { + status = "okay"; + + /* The QCN6102 radio should map to UPD ID 2. Without */ + /* bootargs, the firmware will expect it to be on UPD ID 3 */ + boot-args = < + /* type: */ 0x1 /* PCIE0 */ + /* length: */ 4 + /* UPD ID: */ 2 + /* reset GPIO: */ 15 + /* reserved: */ 0 0>; +}; + +&wifi { + // IPQ5018 + status = "okay"; + + qcom,rproc = <&q6_wcss_pd1>; + qcom,ath11k-calibration-variant = "CMCC-MR3000D-CI"; + qcom,ath11k-fw-memory-mode = <1>; + qcom,bdf-addr = <0x4c400000>; +}; + +&wifi1 { + // QCN6102 5G + status = "okay"; + + qcom,rproc = <&q6_wcss_pd2>; + qcom,userpd-subsys-name = "q6v5_wcss_userpd2"; + qcom,ath11k-calibration-variant = "CMCC-MR3000D-CI"; + qcom,ath11k-fw-memory-mode = <1>; + qcom,bdf-addr = <0x4d100000>; + qcom,m3-dump-addr = <0x4df00000>; +}; diff --git a/target/linux/qualcommax/image/ipq50xx.mk b/target/linux/qualcommax/image/ipq50xx.mk index c27d962f0fe..a636fea0b38 100644 --- a/target/linux/qualcommax/image/ipq50xx.mk +++ b/target/linux/qualcommax/image/ipq50xx.mk @@ -19,6 +19,22 @@ define Build/mstc-header rm -f $@.crclen endef +define Device/cmcc_mr3000d-ci + $(call Device/FitImageLzma) + $(call Device/UbiFit) + DEVICE_VENDOR := CMCC + DEVICE_MODEL := MR3000D-CI + DEVICE_DTS_CONFIG := config@mp03.3-m1 + SOC := ipq5018 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 59392k + NAND_SIZE := 128m + DEVICE_PACKAGES := ath11k-firmware-ipq5018-qcn6122 \ + ipq-wifi-cmcc_mr3000d-ci +endef +TARGET_DEVICES += cmcc_mr3000d-ci + define Device/cmcc_pz-l8 $(call Device/FitImageLzma) $(call Device/UbiFit) diff --git a/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network index 09a68d7c1e9..16aa187ec80 100644 --- a/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network +++ b/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network @@ -16,6 +16,7 @@ ipq50xx_setup_interfaces() glinet,gl-b3000) ucidef_set_interfaces_lan_wan "lan1 lan2" "wan" ;; + cmcc,mr3000d-ci|\ cmcc,pz-l8|\ linksys,mx2000|\ linksys,mx5500|\ diff --git a/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata index d4a913b9cc6..92fd10a04fb 100644 --- a/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata +++ b/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -9,6 +9,13 @@ board=$(board_name) case "$FIRMWARE" in "ath11k/IPQ5018/hw1.0/cal-ahb-c000000.wifi.bin") case "$board" in + cmcc,mr3000d-ci) + caldata_extract "0:art" 0x1000 0x20000 + wlan_mac=$(mtd_get_mac_binary 0:art 12) + ath11k_patch_mac $wlan_mac 0 + ath11k_set_macflag + ath11k_remove_regdomain + ;; elecom,wrc-x3000gs2|\ iodata,wn-dax3000gr|\ zyxel,scr50axe) @@ -54,6 +61,13 @@ case "$FIRMWARE" in ;; "ath11k/QCN6122/hw1.0/cal-ahb-b00a040.wifi.bin") case "$board" in + cmcc,mr3000d-ci) + caldata_extract "0:art" 0x26800 0x20000 + wlan_mac=$(mtd_get_mac_binary 0:art 18) + ath11k_patch_mac $wlan_mac 0 + ath11k_remove_regdomain + ath11k_set_macflag + ;; elecom,wrc-x3000gs2|\ iodata,wn-dax3000gr|\ zyxel,scr50axe) diff --git a/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh index c6e8d0fb0dc..9be1d8211cd 100644 --- a/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh @@ -179,6 +179,7 @@ platform_pre_upgrade() { platform_do_upgrade() { case "$(board_name)" in + cmcc,mr3000d-ci|\ cmcc,pz-l8|\ elecom,wrc-x3000gs2|\ iodata,wn-dax3000gr) -- 2.47.3