From 401aec35ac7bd04b4018a519257b945abb88e26c Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Wed, 10 Dec 2025 07:53:43 +0000 Subject: [PATCH] media: dw9714: Fix powerup sequence We have experienced seen multiple I2C errors while doing stress test on the module: dw9714 i2c-PRP0001:01: dw9714_vcm_resume I2C failure: -5 dw9714 i2c-PRP0001:01: I2C write fail Inspecting the powerup sequence we found that it does not match the documentation at: https://blog.arducam.com/downloads/DW9714A-DONGWOON(Autofocus_motor_manual).pdf """ (2) DW9714A requires waiting time of 12ms after power on. During this waiting time, the offset calibration of internal amplifier is operating for minimization of output offset current . """ This patch increases the powerup delay to follow the documentation. Fixes: 9d00ccabfbb5 ("media: i2c: dw9714: Fix occasional probe errors") Signed-off-by: Ricardo Ribalda Reviewed-by: Hans de Goede Tested-by: Neil Sun Reported-by: Naomi Huang Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/i2c/dw9714.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c index 1e7ad355a388c..3288de539452e 100644 --- a/drivers/media/i2c/dw9714.c +++ b/drivers/media/i2c/dw9714.c @@ -149,7 +149,7 @@ static int dw9714_power_up(struct dw9714_device *dw9714_dev) gpiod_set_value_cansleep(dw9714_dev->powerdown_gpio, 0); - usleep_range(1000, 2000); + usleep_range(12000, 14000); return 0; } -- 2.47.3