From 41399c5d476156635c9a58de870d39318e22fa09 Mon Sep 17 00:00:00 2001 From: Guodong Xu Date: Thu, 22 Jan 2026 17:43:42 +0800 Subject: [PATCH] regulator: spacemit-p1: Fix n_voltages for BUCK and LDO regulators Higher voltage settings were unusable due to incorrect n_voltages values causing registration failures. For example, setting aldo4 to 3.3V failed with -EINVAL because the required selector (123) exceeded the allowed range (n_voltages=117). Fix by aligning n_voltages with the hardware register widths per the P1 datasheet [1]: - BUCK: 255 (was 254), allows selectors 0-254, selector 255 is reserved - LDO: 128 (was 117), allows selectors 0-127, selectors 0-10 are for suspend mode, valid operational range is 11-127 This enables the full voltage range supported by the hardware. Fixes: 8b84d712ad84 ("regulator: spacemit: support SpacemiT P1 regulators") Link: https://developer.spacemit.com/documentation [1] Signed-off-by: Guodong Xu Link: https://patch.msgid.link/20260122-spacemit-p1-v1-1-309be27fbff9@riscstar.com Signed-off-by: Mark Brown --- drivers/regulator/spacemit-p1.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/spacemit-p1.c b/drivers/regulator/spacemit-p1.c index 2bf9137e12b1..2b585ba01a93 100644 --- a/drivers/regulator/spacemit-p1.c +++ b/drivers/regulator/spacemit-p1.c @@ -87,13 +87,13 @@ static const struct linear_range p1_ldo_ranges[] = { } #define P1_BUCK_DESC(_n) \ - P1_REG_DESC(BUCK, buck, _n, "vin", 0x47, BUCK_MASK, 254, p1_buck_ranges) + P1_REG_DESC(BUCK, buck, _n, "vin", 0x47, BUCK_MASK, 255, p1_buck_ranges) #define P1_ALDO_DESC(_n) \ - P1_REG_DESC(ALDO, aldo, _n, "vin", 0x5b, LDO_MASK, 117, p1_ldo_ranges) + P1_REG_DESC(ALDO, aldo, _n, "vin", 0x5b, LDO_MASK, 128, p1_ldo_ranges) #define P1_DLDO_DESC(_n) \ - P1_REG_DESC(DLDO, dldo, _n, "buck5", 0x67, LDO_MASK, 117, p1_ldo_ranges) + P1_REG_DESC(DLDO, dldo, _n, "buck5", 0x67, LDO_MASK, 128, p1_ldo_ranges) static const struct regulator_desc p1_regulator_desc[] = { P1_BUCK_DESC(1), -- 2.47.3