From 41469ff94c052b4900af85f1c62a17aff6236f42 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 23 Jul 2025 15:17:17 -0500 Subject: [PATCH] wifi: Fix typos Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20250723201741.2908456-1-helgaas@kernel.org Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath10k/hw.h | 8 +++---- drivers/net/wireless/ath/ath5k/reg.h | 2 +- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 6 ++--- .../broadcom/brcm80211/brcmfmac/common.c | 4 ++-- .../broadcom/brcm80211/brcmfmac/common.h | 4 ++-- .../broadcom/brcm80211/brcmfmac/core.h | 2 +- .../broadcom/brcm80211/brcmfmac/p2p.c | 4 ++-- .../net/wireless/intel/iwlegacy/commands.h | 2 +- .../intel/iwlwifi/fw/api/time-event.h | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 ++-- .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 4 ++-- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 6 ++--- drivers/net/wireless/intersil/p54/p54spi.c | 4 ++-- drivers/net/wireless/marvell/libertas/cfg.c | 4 ++-- drivers/net/wireless/marvell/mwifiex/fw.h | 4 ++-- .../net/wireless/ralink/rt2x00/rt2800lib.c | 2 +- .../net/wireless/ralink/rt2x00/rt2x00dev.c | 4 ++-- .../net/wireless/ralink/rt2x00/rt2x00queue.c | 2 +- drivers/net/wireless/realtek/rtl8xxxu/core.c | 2 +- .../wireless/realtek/rtlwifi/rtl8192de/rf.c | 2 +- .../wireless/realtek/rtlwifi/rtl8192se/rf.c | 2 +- .../wireless/realtek/rtlwifi/rtl8821ae/hw.c | 22 +++++++++---------- drivers/net/wireless/ti/wl1251/reg.h | 6 ++--- drivers/net/wireless/ti/wl12xx/reg.h | 6 ++--- drivers/net/wireless/zydas/zd1211rw/zd_usb.c | 2 +- 25 files changed, 55 insertions(+), 55 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index fec56b9164976..da71dce9babf7 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -473,8 +473,8 @@ enum ath10k_hw_cc_wraparound_type { */ ATH10K_HW_CC_WRAP_SHIFTED_ALL = 1, - /* Each hw counter wrapsaround independently. When the - * counter overflows the repestive counter is right shifted + /* Each hw counter wraps around independently. When the + * counter overflows the respective counter is right shifted * by 1, i.e reset to 0x7fffffff, and other counters will be * running unaffected. In this type of wraparound, it should * be possible to report accurate Rx busy time unlike the @@ -837,7 +837,7 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw, #define TARGET_10_4_NUM_TDLS_BUFFER_STA 1 #define TARGET_10_4_NUM_TDLS_SLEEP_STA 1 -/* Maximum number of Copy Engine's supported */ +/* Maximum number of Copy Engines supported */ #define CE_COUNT_MAX 12 /* Number of Copy Engines supported */ @@ -1134,7 +1134,7 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw, #define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB) /* Register definitions for first generation ath10k cards. These cards include - * a mac thich has a register allocation similar to ath9k and at least some + * a mac which has a register allocation similar to ath9k and at least some * registers including the ones relevant for modifying the coverage class are * identical to the ath9k definitions. * These registers are usually managed by the ath10k firmware. However by diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index 0ea1608b47fd4..22101c96713f0 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -543,7 +543,7 @@ * Queue control unit (QCU) registers [5211+] * * Card has 12 TX Queues but i see that only 0-9 are used (?) - * both in binary HAL (see ah.h) and ar5k. Each queue has it's own + * both in binary HAL (see ah.h) and ar5k. Each queue has its own * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) * configuration register (0x08c0 - 0x08ec), a ready time configuration * register (0x0900 - 0x092c), a misc configuration register (0x09c0 - diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index e12389a2cb477..8af402555b5ee 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -3878,7 +3878,7 @@ brcmf_notify_sched_scan_results(struct brcmf_if *ifp, brcmf_dbg(SCAN, "Enter\n"); if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) { - brcmf_dbg(SCAN, "Event data to small. Ignore\n"); + brcmf_dbg(SCAN, "Event data too small. Ignore\n"); return 0; } @@ -4046,7 +4046,7 @@ brcmf_wowl_nd_results(struct brcmf_if *ifp, const struct brcmf_event_msg *e, brcmf_dbg(SCAN, "Enter\n"); if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) { - brcmf_dbg(SCAN, "Event data to small. Ignore\n"); + brcmf_dbg(SCAN, "Event data too small. Ignore\n"); return 0; } @@ -4308,7 +4308,7 @@ static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy, brcmf_set_mpc(ifp, 1); } else { - /* Configure WOWL paramaters */ + /* Configure WOWL parameters */ brcmf_configure_wowl(cfg, ifp, wowl); /* Prevent disassociation due to inactivity with keep-alive */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c index 75f101622db1b..688f16c513192 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c @@ -525,7 +525,7 @@ struct brcmf_mp_device *brcmf_get_module_param(struct device *dev, if (!settings) return NULL; - /* start by using the module paramaters */ + /* start by using the module parameters */ settings->p2p_enable = !!brcmf_p2p_enable; settings->feature_disable = brcmf_feature_disable; settings->fcmode = brcmf_fcmode; @@ -612,7 +612,7 @@ static int __init brcmfmac_module_init(void) if (err == -ENODEV) brcmf_dbg(INFO, "No platform data available.\n"); - /* Initialize global module paramaters */ + /* Initialize global module parameters */ brcmf_mp_attach(); /* Continue the initialization by registering the different busses */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h index 2be2986d2110a..3bdb6984b2dd4 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h @@ -20,7 +20,7 @@ */ /** - * struct brcmf_mp_global_t - Global module paramaters. + * struct brcmf_mp_global_t - Global module parameters. * * @firmware_path: Alternative firmware path. */ @@ -31,7 +31,7 @@ struct brcmf_mp_global_t { extern struct brcmf_mp_global_t brcmf_mp_global; /** - * struct brcmf_mp_device - Device module paramaters. + * struct brcmf_mp_device - Device module parameters. * * @p2p_enable: Legacy P2P0 enable (old wpa_supplicant). * @feature_disable: Feature_disable bitmask. diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h index d53839f855d72..399b6810e394d 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h @@ -67,7 +67,7 @@ struct brcmf_ampdu_rx_reorder { /* Forward decls for struct brcmf_pub (see below) */ struct brcmf_proto; /* device communication protocol info */ struct brcmf_fws_info; /* firmware signalling info */ -struct brcmf_mp_device; /* module paramateres, device specific */ +struct brcmf_mp_device; /* module parameters, device specific */ /* * struct brcmf_rev_info diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c index 6e0c90f4718b5..0dc9d28cd77b2 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c @@ -1403,7 +1403,7 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, u8 action; if (e->datalen < sizeof(*rxframe)) { - brcmf_dbg(SCAN, "Event data to small. Ignore\n"); + brcmf_dbg(SCAN, "Event data too small. Ignore\n"); return 0; } @@ -1949,7 +1949,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, e->reason); if (e->datalen < sizeof(*rxframe)) { - brcmf_dbg(SCAN, "Event data to small. Ignore\n"); + brcmf_dbg(SCAN, "Event data too small. Ignore\n"); return 0; } diff --git a/drivers/net/wireless/intel/iwlegacy/commands.h b/drivers/net/wireless/intel/iwlegacy/commands.h index 4a9fa8b83f0ff..b61b8f377702f 100644 --- a/drivers/net/wireless/intel/iwlegacy/commands.h +++ b/drivers/net/wireless/intel/iwlegacy/commands.h @@ -2229,7 +2229,7 @@ struct il_spectrum_notification { u8 channel; u8 type; /* see enum il_measurement_type */ u8 reserved1; - /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only + /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only * valid if applicable for measurement type requested. */ __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h b/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h index f586379d66ddd..46d35ef4751e5 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/time-event.h @@ -452,7 +452,7 @@ struct iwl_roc_notif { * listen mode. Will be fragmented. Valid only on the P2P Device MAC. * Valid only on the P2P Device MAC. The firmware will take into account * the duration, the interval and the repetition count. - * @SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION: Schedule the P2P Device to be be + * @SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION: Schedule the P2P Device to be * able to run the GO Negotiation. Will not be fragmented and not * repetitive. Valid only on the P2P Device MAC. Only the duration will * be taken into account. diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index d231819ee4c62..029c846a236f7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -250,7 +250,7 @@ static void iwl_mvm_wowlan_get_rsc_tsc_data(struct ieee80211_hw *hw, /* * For non-QoS this relies on the fact that both the uCode and - * mac80211 use TID 0 (as they need to to avoid replay attacks) + * mac80211 use TID 0 (as they need to avoid replay attacks) * for checking the IV in the frames. */ for (i = 0; i < IWL_NUM_RSC; i++) { @@ -386,7 +386,7 @@ static void iwl_mvm_wowlan_get_rsc_v5_data(struct ieee80211_hw *hw, /* * For non-QoS this relies on the fact that both the uCode and - * mac80211 use TID 0 (as they need to to avoid replay attacks) + * mac80211 use TID 0 (as they need to avoid replay attacks) * for checking the IV in the frames. */ for (i = 0; i < IWL_MAX_TID_COUNT; i++) { diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index ed19b82d14fa9..4ad3d32683d84 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -3332,7 +3332,7 @@ void iwl_mvm_mac_cancel_hw_scan(struct ieee80211_hw *hw, * us to stop a hw_scan when it's already stopped. This can * happen, for instance, if we stopped the scan ourselves, * called ieee80211_scan_completed() and the userspace called - * cancel scan scan before ieee80211_scan_work() could run. + * cancel scan before ieee80211_scan_work() could run. * To handle that, simply return if the scan is not running. */ if (mvm->scan_status & IWL_MVM_SCAN_REGULAR) @@ -4345,7 +4345,7 @@ int iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw, * us to stop a sched_scan when it's already stopped. This * can happen, for instance, if we stopped the scan ourselves, * called ieee80211_sched_scan_stopped() and the userspace called - * stop sched scan scan before ieee80211_sched_scan_stopped_work() + * stop sched scan before ieee80211_sched_scan_stopped_work() * could run. To handle this, simply return if the scan is * not running. */ diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 5f67975989981..11c6b86db4ec6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -2461,7 +2461,7 @@ void iwl_mvm_free_bcast_sta_queues(struct iwl_mvm *mvm, mvmvif->deflink.bcast_sta.tfd_queue_msk &= ~BIT(queue); } -/* Send the FW a request to remove the station from it's internal data +/* Send the FW a request to remove the station from its internal data * structures, but DO NOT remove the entry from the local data structures. */ int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) { @@ -2524,7 +2524,7 @@ void iwl_mvm_dealloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) } /* - * Send the FW a request to remove the station from it's internal data + * Send the FW a request to remove the station from its internal data * structures, and in addition remove it from the local data structure. */ int iwl_mvm_rm_p2p_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) @@ -2677,7 +2677,7 @@ static int __iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, u8 sta_id, } /* - * Send the FW a request to remove the station from it's internal data + * Send the FW a request to remove the station from its internal data * structures, and in addition remove it from the local data structure. */ int iwl_mvm_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c index 27f44a9f0bc1f..9d66dcae54e02 100644 --- a/drivers/net/wireless/intersil/p54/p54spi.c +++ b/drivers/net/wireless/intersil/p54/p54spi.c @@ -32,7 +32,7 @@ MODULE_FIRMWARE("3826.eeprom"); /* gpios should be handled in board files and provided via platform data, * but because it's currently impossible for p54spi to have a header file - * in include/linux, let's use module paramaters for now + * in include/linux, let's use module parameters for now */ static int p54spi_gpio_power = 97; @@ -155,7 +155,7 @@ static int p54spi_request_firmware(struct ieee80211_hw *dev) struct p54s_priv *priv = dev->priv; int ret; - /* FIXME: should driver use it's own struct device? */ + /* FIXME: should driver use its own struct device? */ ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); if (ret < 0) { diff --git a/drivers/net/wireless/marvell/libertas/cfg.c b/drivers/net/wireless/marvell/libertas/cfg.c index 2e2c193716d96..94dd488becaf6 100644 --- a/drivers/net/wireless/marvell/libertas/cfg.c +++ b/drivers/net/wireless/marvell/libertas/cfg.c @@ -2146,8 +2146,8 @@ static void lbs_reg_notifier(struct wiphy *wiphy, } /* - * This function get's called after lbs_setup_firmware() determined the - * firmware capabities. So we can setup the wiphy according to our + * This function gets called after lbs_setup_firmware() determined the + * firmware capabilities. So we can setup the wiphy according to our * hardware/firmware. */ int lbs_cfg_register(struct lbs_private *priv) diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h index 91458f3bd14a5..e9e8966069121 100644 --- a/drivers/net/wireless/marvell/mwifiex/fw.h +++ b/drivers/net/wireless/marvell/mwifiex/fw.h @@ -1119,7 +1119,7 @@ struct host_cmd_ds_get_hw_spec { __le32 fw_cap_info; __le32 dot_11n_dev_cap; u8 dev_mcs_support; - __le16 mp_end_port; /* SDIO only, reserved for other interfacces */ + __le16 mp_end_port; /* SDIO only, reserved for other interfaces */ __le16 mgmt_buf_count; /* mgmt IE buffer count */ __le32 reserved_5; __le32 reserved_6; @@ -1739,7 +1739,7 @@ struct host_cmd_ds_11n_cfg { struct host_cmd_ds_txbuf_cfg { __le16 action; __le16 buff_size; - __le16 mp_end_port; /* SDIO only, reserved for other interfacces */ + __le16 mp_end_port; /* SDIO only, reserved for other interfaces */ __le16 reserved3; } __packed; diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index 4b5a7c9b6499d..b264ed0af9234 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -639,7 +639,7 @@ static bool rt2800_check_firmware_crc(const u8 *data, const size_t len) /* * Use the crc ccitt algorithm. * This will return the same value as the legacy driver which - * used bit ordering reversion on the both the firmware bytes + * used bit ordering reversion on both the firmware bytes * before input input as well as on the final output. * Obviously using crc ccitt directly is much more efficient. */ diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c index 432ddfac2c33e..7db29e90eb4f9 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c @@ -357,7 +357,7 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev, } /* - * Every single frame has it's own tx status, hence report + * Every single frame has its own tx status, hence report * every frame as ampdu of size 1. * * TODO: if we can find out how many frames were aggregated @@ -496,7 +496,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, /* * If the IV/EIV data was stripped from the frame before it was * passed to the hardware, we should now reinsert it again because - * mac80211 will expect the same data to be present it the + * mac80211 will expect the same data to be present in the * frame as it was passed to us. */ if (rt2x00_has_cap_hw_crypto(rt2x00dev)) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c index 013003777fee1..13e48b1e7356f 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c @@ -45,7 +45,7 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp) /* * For IV/EIV/ICV assembly we must make sure there is - * at least 8 bytes bytes available in headroom for IV/EIV + * at least 8 bytes available in headroom for IV/EIV * and 8 bytes for ICV data as tailroon. */ if (rt2x00_has_cap_hw_crypto(rt2x00dev)) { diff --git a/drivers/net/wireless/realtek/rtl8xxxu/core.c b/drivers/net/wireless/realtek/rtl8xxxu/core.c index f6f169d2062d9..831b5025c6349 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/core.c @@ -1163,7 +1163,7 @@ static void rtl8xxxu_start_tx_beacon(struct rtl8xxxu_priv *priv) /* - * The rtl8723a has 3 channel groups for it's efuse settings. It only + * The rtl8723a has 3 channel groups for its efuse settings. It only * supports the 2.4GHz band, so channels 1 - 14: * group 0: channels 1 - 3 * group 1: channels 4 - 9 diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c index eb7d8b070cc77..494b2706abeee 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c @@ -84,7 +84,7 @@ bool rtl92d_phy_rf6052_config(struct ieee80211_hw *hw) rtlphy->num_total_rfpath = 2; /* Single phy mode: use radio_a radio_b config path_A path_B */ - /* seperately by MAC0, and MAC1 needn't configure RF; */ + /* separately by MAC0, and MAC1 needn't configure RF; */ /* Dual PHY mode:MAC0 use radio_a config 1st phy path_A, */ /* MAC1 use radio_b config 2nd PHY path_A. */ /* DMDP,MAC0 on G band,MAC1 on A band. */ diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c index 5a493602aaf24..17d29249a7115 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c @@ -438,7 +438,7 @@ bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw) rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2, B3WIRE_DATALENGTH, 0x0); - /* Initialize RF fom connfiguration file */ + /* Initialize RF from configuration file */ switch (rfpath) { case RF90_PATH_A: rtstatus = rtl92s_phy_config_rf(hw, diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c index a5a34b5edcfdb..3a4a334762055 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c @@ -1026,7 +1026,7 @@ static void _rtl8821ae_hw_configure(struct ieee80211_hw *hw) /*Set retry limit*/ rtl_write_word(rtlpriv, REG_RL, 0x0707); - /* Set Data / Response auto rate fallack retry count*/ + /* Set Data / Response auto rate fallback retry count*/ rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000); rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504); rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000); @@ -1295,12 +1295,12 @@ static bool _rtl8821ae_reset_pcie_interface_dma(struct ieee80211_hw *hw, rtl_write_byte(rtlpriv, REG_CR, 0xFF); /* We should init LLT & RQPN and - * prepare Tx/Rx descrptor address later + * prepare Tx/Rx descriptor address later * because MAC function is reset.*/ } /* 7. Restore PCIe autoload down bit */ - /* 8812AE does not has the defination. */ + /* 8812AE does not have the definition. */ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8821AE) { /* write 0xF8 bit[17] = 1'b1 */ tmp = rtl_read_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL + 2); @@ -1308,7 +1308,7 @@ static bool _rtl8821ae_reset_pcie_interface_dma(struct ieee80211_hw *hw, rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL + 2, tmp); } - /* In MAC power on state, BB and RF maybe in ON state, + /* In MAC power on state, BB and RF may be in ON state, * if we release TRx DMA here. * it will cause packets to be started to Tx/Rx, * so we release Tx/Rx DMA later.*/ @@ -1713,7 +1713,7 @@ static bool _rtl8821ae_wowlan_initialize_adapter(struct ieee80211_hw *hw) _rtl8821ae_get_wakeup_reason(hw); /* Patch Pcie Rx DMA hang after S3/S4 several times. - * The root cause has not be found. */ + * The root cause has not been found. */ if (_rtl8821ae_check_pcie_dma_hang(hw)) _rtl8821ae_reset_pcie_interface_dma(hw, true, false); @@ -1926,7 +1926,7 @@ int rtl8821ae_hw_init(struct ieee80211_hw *hw) rtl8821ae_phy_mac_config(hw); /* because last function modify RCR, so we update * rcr var here, or TP will unstable for receive_config - * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx + * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252 rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR); rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); @@ -2332,7 +2332,7 @@ void rtl8821ae_card_disable(struct ieee80211_hw *hw) if (_rtl8821ae_dynamic_rqpn(hw, 0xE0, 0x3, 0x80c20d0d)) rtlhal->re_init_llt_table = true; - /* 3 <2> Set Fw releted H2C cmd. */ + /* 3 <2> Set Fw related H2C cmd. */ /* Set WoWLAN related security information. */ rtl8821ae_set_fw_global_info_cmd(hw); @@ -2357,8 +2357,8 @@ void rtl8821ae_card_disable(struct ieee80211_hw *hw) /* 3 <3> Hw Configutations */ - /* Wait untill Rx DMA Finished before host sleep. - * FW Pause Rx DMA may happens when received packet doing dma. + /* Wait until Rx DMA Finished before host sleep. + * FW Pause Rx DMA may happen when received packet doing DMA. */ rtl_write_byte(rtlpriv, REG_RXDMA_CONTROL, BIT(2)); @@ -3927,7 +3927,7 @@ void rtl8821ae_resume(struct ieee80211_hw *hw) { } -/* Turn on AAP (RCR:bit 0) for promicuous mode. */ +/* Turn on AAP (RCR:bit 0) for promiscuous mode. */ void rtl8821ae_allow_all_destaddr(struct ieee80211_hw *hw, bool allow_all_da, bool write_into_reg) { @@ -3964,7 +3964,7 @@ void rtl8821ae_add_wowlan_pattern(struct ieee80211_hw *hw, /* RX page size = 128 byte */ offset = MAX_RX_DMA_BUFFER_SIZE_8812 / 128; - /* We should start from the boundry */ + /* We should start from the boundary */ cam_start = offset * 128; /* Enable Rx packet buffer access. */ diff --git a/drivers/net/wireless/ti/wl1251/reg.h b/drivers/net/wireless/ti/wl1251/reg.h index 890176c915ab7..bfe35754f33a6 100644 --- a/drivers/net/wireless/ti/wl1251/reg.h +++ b/drivers/net/wireless/ti/wl1251/reg.h @@ -205,7 +205,7 @@ enum wl12xx_acx_int_reg { the burst read starts at EEPROM address 0. Otherwise, it starts at the address following the address of the previous access. - TheWlan hardware hardware clears this bit automatically. + TheWlan hardware clears this bit automatically. Default: 0x00000000 *================================================*/ @@ -353,13 +353,13 @@ enum wl12xx_acx_int_reg { loads a single byte of data into the EE_DATA register from the EEPROM location specified in the EE_ADDR register. - The Wlan hardware hardware clears this bit automatically. + The Wlan hardware clears this bit automatically. EE_DATA is valid when this bit is cleared. 0 EE_WRITE - EEPROM Write Request - Setting this bit writes a single byte of data from the EE_DATA register into the EEPROM location specified in the EE_ADDR register. - The Wlan hardware hardware clears this bit automatically. + The Wlan hardware clears this bit automatically. *===============================================*/ #define EE_CTL (REGISTERS_BASE + 0x2000) #define ACX_EE_CTL_REG EE_CTL diff --git a/drivers/net/wireless/ti/wl12xx/reg.h b/drivers/net/wireless/ti/wl12xx/reg.h index 8ff018808020b..601305a26141d 100644 --- a/drivers/net/wireless/ti/wl12xx/reg.h +++ b/drivers/net/wireless/ti/wl12xx/reg.h @@ -168,7 +168,7 @@ the burst read starts at EEPROM address 0. Otherwise, it starts at the address following the address of the previous access. - TheWlan hardware hardware clears this bit automatically. + TheWlan hardware clears this bit automatically. Default: 0x00000000 *================================================*/ @@ -276,13 +276,13 @@ loads a single byte of data into the EE_DATA register from the EEPROM location specified in the EE_ADDR register. - The Wlan hardware hardware clears this bit automatically. + The Wlan hardware clears this bit automatically. EE_DATA is valid when this bit is cleared. 0 EE_WRITE - EEPROM Write Request - Setting this bit writes a single byte of data from the EE_DATA register into the EEPROM location specified in the EE_ADDR register. - The Wlan hardware hardware clears this bit automatically. + The Wlan hardware clears this bit automatically. *===============================================*/ #define ACX_EE_CTL_REG EE_CTL #define EE_WRITE 0x00000001ul diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c index 9ae10f65f2af0..2faa0de2a36ec 100644 --- a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c @@ -445,7 +445,7 @@ static void int_urb_complete(struct urb *urb) } if (urb->actual_length < sizeof(hdr)) { - dev_dbg_f(urb_dev(urb), "error: urb %p to small\n", urb); + dev_dbg_f(urb_dev(urb), "error: urb %p too small\n", urb); goto resubmit; } -- 2.47.2