From 51f89c488f2ecc020f82bfedd77482584ce8027a Mon Sep 17 00:00:00 2001 From: Siddharth Vadapalli Date: Wed, 19 Nov 2025 21:31:05 +0530 Subject: [PATCH] arm64: dts: ti: k3-j721e-sk: Fix pinmux for pin Y1 used by power regulator The SoC pin Y1 is incorrectly defined in the WKUP Pinmux device-tree node (pinctrl@4301c000) leading to the following silent failure: pinctrl-single 4301c000.pinctrl: mux offset out of range: 0x1dc (0x178) According to the datasheet for the J721E SoC [0], the pin Y1 belongs to the MAIN Pinmux device-tree node (pinctrl@11c000). This is confirmed by the address of the pinmux register for it on page 142 of the datasheet which is 0x00011C1DC. Hence fix it. [0]: https://www.ti.com/lit/ds/symlink/tda4vm.pdf Fixes: 97b67cc102dc ("arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators") Cc: stable@vger.kernel.org Signed-off-by: Siddharth Vadapalli Reviewed-by: Yemike Abhilash Chandra Link: https://patch.msgid.link/20251119160148.2752616-1-s-vadapalli@ti.com Signed-off-by: Vignesh Raghavendra --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 542eabfb48dbb..050776cb4df8f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -474,6 +474,12 @@ J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */ >; }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */ + >; + }; }; &wkup_pmx0 { @@ -536,12 +542,6 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */ - >; - }; - wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ -- 2.47.3