From 5ea0d42c1980e6d10e5cb56a78021db5bfcebaaf Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Mon, 2 Jun 2025 21:39:52 +0200 Subject: [PATCH] net: dsa: b53: allow RGMII for bcm63xx RGMII ports Add RGMII to supported interfaces for BCM63xx RGMII ports so they can be actually used in RGMII mode. Without this, phylink will fail to configure them: [ 3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL [ 3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL [ 3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4 Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs") Reviewed-by: Florian Fainelli Signed-off-by: Jonas Gorski Link: https://patch.msgid.link/20250602193953.1010487-5-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/dsa/b53/b53_common.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 3f4934f974c8..be4493b769f4 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -1439,6 +1439,10 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port, __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces); + /* BCM63xx RGMII ports support RGMII */ + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) + phy_interface_set_rgmii(config->supported_interfaces); + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100; -- 2.47.2