From 753f9460a645296f656bf7fd4a85f55c411561fb Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Fri, 12 Dec 2025 17:57:21 +0800 Subject: [PATCH] arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply The TJA1057 used on i.MX93 EVK is actually high-speed CAN transceiver, not a regulator supply. So use phys to reflect the truth. Reviewed-by: Frank Li Acked-by: Marc Kleine-Budde Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx93-11x11-evk.dts | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index b94a24193e199..8dd5340e8141f 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -81,6 +81,13 @@ }; + flexcan_phy: can-phy { + compatible = "nxp,tja1057"; + #phy-cells = <0>; + max-bitrate = <5000000>; + silent-gpios = <&adp5585 6 GPIO_ACTIVE_HIGH>; + }; + reg_vdd_12v: regulator-vdd-12v { compatible = "regulator-fixed"; regulator-name = "VDD_12V"; @@ -106,14 +113,6 @@ enable-active-high; }; - reg_can2_standby: regulator-can2-standby { - compatible = "regulator-fixed"; - regulator-name = "can2-stby"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&adp5585 6 GPIO_ACTIVE_LOW>; - }; - reg_m2_pwr: regulator-m2-pwr { compatible = "regulator-fixed"; regulator-name = "M.2-power"; @@ -302,7 +301,7 @@ &flexcan2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_can2_standby>; + phys = <&flexcan_phy>; status = "okay"; }; -- 2.47.3