From 79a3286e61829fc43abdd6e3beb31b24930c7af6 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Wed, 21 Jan 2026 11:42:13 +0400 Subject: [PATCH] arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576 Rockchip RK3576 UFS controller uses a dedicated pin to reset the connected UFS device, which can operate either in a hardware controlled mode or as a GPIO pin. Power-on default is GPIO mode, but the boot ROM reconfigures it to a hardware controlled mode if it uses UFS to load the next boot stage. Given that existing bindings (and rk3576.dtsi) expect a GPIO-controlled device reset, request the required pin config explicitly. The pin is requested with pull-down enabled, which is in line with the SoC power-on default and helps ensure that the attached UFS chip stays in reset until the driver takes over the control of the respective GPIO line. This doesn't appear to affect Linux, but it does affect U-boot: Before: => md.l 0x2604b398 2604b398: 00000011 00000000 00000000 00000000 ................ < ... snip ... > => ufs init ufshcd-rockchip ufshc@2a2d0000: [RX, TX]: gear=[3, 3], lane[2, 2], pwr[FASTAUTO_MODE, FASTAUTO_MODE], rate = 2 => md.l 0x2604b398 2604b398: 00000011 00000000 00000000 00000000 ................ After: => md.l 0x2604b398 2604b398: 00000011 00000000 00000000 00000000 ................ < ... snip ...> => ufs init ufshcd-rockchip ufshc@2a2d0000: [RX, TX]: gear=[3, 3], lane[2, 2], pwr[FASTAUTO_MODE, FASTAUTO_MODE], rate = 2 => md.l 0x2604b398 2604b398: 00000010 00000000 00000000 00000000 ................ (0x2604b398 is the respective pin mux register, with its BIT0 driving the mode of UFS_RST: unset = GPIO, set = hardware controlled UFS_RST) This helps ensure that GPIO-driven device reset actually fires when the system requests it, not when whatever black box magic inside the UFSHC decides to reset the flash chip. Cc: stable@vger.kernel.org Fixes: c75e5e010fef ("scsi: arm64: dts: rockchip: Add UFS support for RK3576 SoC") Reported-by: Quentin Schulz Reviewed-by: Quentin Schulz Signed-off-by: Alexey Charkov Link: https://patch.msgid.link/20260121-ufs-rst-v3-1-35839bcb4ca7@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3576-pinctrl.dtsi | 7 +++++++ arch/arm64/boot/dts/rockchip/rk3576.dtsi | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3576-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3576-pinctrl.dtsi index 0b0851a7e4ea9..98c9f8013158c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576-pinctrl.dtsi @@ -5228,6 +5228,13 @@ /* ufs_rstn */ <4 RK_PD0 1 &pcfg_pull_none>; }; + + /omit-if-no-ref/ + ufs_rstgpio: ufs-rstgpio { + rockchip,pins = + /* ufs_rstn */ + <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; + }; }; ufs_testdata0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 7286d968e2b06..4d7743dde6641 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -1865,7 +1865,7 @@ assigned-clock-parents = <&cru CLK_REF_MPHY_26M>; interrupts = ; power-domains = <&power RK3576_PD_USB>; - pinctrl-0 = <&ufs_refclk>; + pinctrl-0 = <&ufs_refclk &ufs_rstgpio>; pinctrl-names = "default"; resets = <&cru SRST_A_UFS_BIU>, <&cru SRST_A_UFS_SYS>, <&cru SRST_A_UFS>, <&cru SRST_P_UFS_GRF>; -- 2.47.3