From 842dcff8e2d6fb33f7e9d59332a713b867a8f187 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 14 Jul 2025 15:28:28 -0500 Subject: [PATCH] dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema Convert the TI TWL4030 PMIC GPIO binding to DT schema format. The number of #interrupt-cells was wrong compared to what is in use. Correct it to be 1. Reviewed-by: Andreas Kemnade Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250714202829.3011298-1-robh@kernel.org Signed-off-by: Bartosz Golaszewski --- .../devicetree/bindings/gpio/gpio-twl4030.txt | 29 --------- .../bindings/gpio/ti,twl4030-gpio.yaml | 61 +++++++++++++++++++ 2 files changed, 61 insertions(+), 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-twl4030.txt create mode 100644 Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt deleted file mode 100644 index 66788fda1db38..0000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ /dev/null @@ -1,29 +0,0 @@ -twl4030 GPIO controller bindings - -Required properties: -- compatible: - - "ti,twl4030-gpio" for twl4030 GPIO controller -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. -- #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller - The first cell is the GPIO number. - The second cell is not used. -- ti,use-leds : Enables LEDA and LEDB outputs if set -- ti,debounce : if n-th bit is set, debounces GPIO-n -- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) -- ti,pullups : if n-th bit is set, set a pullup on GPIO-n -- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n - -Example: - -twl_gpio: gpio { - compatible = "ti,twl4030-gpio"; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - ti,use-leds; -}; diff --git a/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml new file mode 100644 index 0000000000000..5e3e199fd9a49 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ti,twl4030-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TWL4030 GPIO controller + +maintainers: + - Aaro Koskinen + - Andreas Kemnade + - Kevin Hilman + - Roger Quadros + - Tony Lindgren + +properties: + compatible: + const: ti,twl4030-gpio + + '#gpio-cells': + const: 2 + + gpio-controller: true + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + ti,debounce: + description: Debounce control bits. Each bit corresponds to a GPIO pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,mmc-cd: + description: MMC card detect control bits. Each bit corresponds to a GPIO pin for VMMC(n+1). + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,pullups: + description: Pull-up control bits. Each bit corresponds to a GPIO pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,pulldowns: + description: Pull-down control bits. Each bit corresponds to a GPIO pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,use-leds: + type: boolean + description: Enables LEDA and LEDB outputs if set + +additionalProperties: false + +examples: + - | + gpio { + compatible = "ti,twl4030-gpio"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <1>; + interrupt-controller; + ti,use-leds; + }; -- 2.47.2