From 9e95446b0cf93a91bc3b3b64c6d423f4024a6ff0 Mon Sep 17 00:00:00 2001
From: Biju Das <biju.das.jz@bp.renesas.com>
Date: Wed, 2 Jul 2025 10:27:53 +0100
Subject: [PATCH] arm64: dts: renesas: r9a09g047e57-smarc: Add gpio keys

RZ/G3E SMARC EVK  has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3 and SLEEP button with NMI support. Add a DT node in device tree
to instantiate the gpio-keys driver for these buttons.

The system can enter into STR state by pressing the sleep button and
wakeup from STR is done by pressing power button. The USER_SW{1,2,3}
configured as wakeup-source, so it can wakeup the system during s2idle.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702092755.70847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../boot/dts/renesas/r9a09g047e57-smarc.dts   | 37 +++++++++++++++++++
 .../boot/dts/renesas/renesas-smarc2.dtsi      | 31 ++++++++++++++++
 2 files changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
index 2454a9743df25..1e67f0a2a945c 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /* Switch selection settings */
+#define SW_LCD_EN		0
 #define SW_GPIO8_CAN0_STB	0
 #define SW_GPIO9_CAN1_STB	0
 #define SW_LCD_EN		0
@@ -15,7 +16,16 @@
 #define SW_SD0_DEV_SEL		0
 #define SW_SDIO_M2E		0
 
+#define PMOD_GPIO4		0
+#define PMOD_GPIO6		0
+#define PMOD_GPIO7		0
+
+#define KEY_1_GPIO		RZG3E_GPIO(3, 1)
+#define KEY_2_GPIO		RZG3E_GPIO(8, 4)
+#define KEY_3_GPIO		RZG3E_GPIO(8, 5)
+
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h>
 #include "r9a09g047e57.dtsi"
 #include "rzg3e-smarc-som.dtsi"
@@ -79,6 +89,29 @@
 	pinctrl-names = "default";
 };
 
+&keys {
+	key-sleep {
+		pinctrl-0 = <&nmi_pins>;
+		pinctrl-names = "default";
+
+		interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>;
+		linux,code = <KEY_SLEEP>;
+		label = "SLEEP";
+		debounce-interval = <20>;
+	};
+#if PMOD_GPIO4
+	/delete-node/ key-1;
+#endif
+
+#if SW_LCD_EN || PMOD_GPIO6
+	/delete-node/ key-2;
+#endif
+
+#if SW_LCD_EN || PMOD_GPIO7
+	/delete-node/ key-3;
+#endif
+};
+
 &pinctrl {
 	canfd_pins: canfd {
 		can1_pins: can1 {
@@ -97,6 +130,10 @@
 			 <RZG3E_PORT_PINMUX(D, 5, 4)>; /* SDA0 */
 	};
 
+	nmi_pins: nmi {
+		pinmux = <RZG3E_PORT_PINMUX(S, 0, 0)>; /* NMI */
+	};
+
 	scif_pins: scif {
 		pins = "SCIF_TXD", "SCIF_RXD";
 		renesas,output-impedance = <1>;
diff --git a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
index 3cac292f20b36..58561da3007a4 100644
--- a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
+++ b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
@@ -23,6 +23,9 @@
  * SW_GPIO9_CAN1_STB:
  *	0 - Connect to GPIO9 PMOD (default)
  *	1 - Connect to CAN1 transceiver STB pin
+ *
+ * GPIO keys are enabled by default. Use PMOD_GPIO macros to disable them
+ * if needed.
  */
 
 / {
@@ -53,6 +56,34 @@
 		max-bitrate = <8000000>;
 		status = "disabled";
 	};
+
+	keys: keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			interrupts-extended = <&pinctrl KEY_1_GPIO IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_1>;
+			label = "USER_SW1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			interrupts-extended = <&pinctrl KEY_2_GPIO IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_2>;
+			label = "USER_SW2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			interrupts-extended = <&pinctrl KEY_3_GPIO IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_3>;
+			label = "USER_SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
 };
 
 &canfd {
-- 
2.47.2