From bd50cb5cdeba73b4d5019f3357edea4f29e2db2a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 30 Jun 2025 02:10:31 +0200 Subject: [PATCH] ARM: stm32: Add STM32MP13xx debug UART initialization Add default STM32MP13xx debug UART initialization. This is similar to STM32MP15xx debug UART initialization, except the RCC registers are at different offsets and the UART pinmux pins are different. Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay Signed-off-by: Marek Vasut --- board/st/stm32mp1/debug_uart.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/board/st/stm32mp1/debug_uart.c b/board/st/stm32mp1/debug_uart.c index 24e3f9f2201..4c2149e0480 100644 --- a/board/st/stm32mp1/debug_uart.c +++ b/board/st/stm32mp1/debug_uart.c @@ -9,17 +9,32 @@ #include #include +#if IS_ENABLED(CONFIG_STM32MP13X) +#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0700) +#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0768) +#elif IS_ENABLED(CONFIG_STM32MP15X) #define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00) #define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28) +#endif +#define GPIOA_BASE 0x50002000 #define GPIOG_BASE 0x50008000 void board_debug_uart_init(void) { - if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE) { - /* UART4 clock enable */ - setbits_le32(RCC_MP_APB1ENSETR, BIT(16)); + if (CONFIG_DEBUG_UART_BASE != STM32_UART4_BASE) + return; + /* UART4 clock enable */ + setbits_le32(RCC_MP_APB1ENSETR, BIT(16)); + + if (IS_ENABLED(CONFIG_STM32MP13X)) { + /* GPIOA clock enable */ + writel(BIT(0), RCC_MP_AHB4ENSETR); + /* GPIO configuration for DH boards: Uart4 TX = A9 */ + writel(0xfffbffff, GPIOA_BASE + 0x00); + writel(0x00000080, GPIOA_BASE + 0x24); + } else if (IS_ENABLED(CONFIG_STM32MP15X)) { /* GPIOG clock enable */ writel(BIT(6), RCC_MP_AHB4ENSETR); /* GPIO configuration for ST boards: Uart4 TX = G11 */ -- 2.47.2