From c9c2cf983dc85e5dc4b80be0a9b7dcb2d55162e1 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Fri, 21 Jun 2024 16:20:30 +0100 Subject: [PATCH] drm/vc4: hvs: Set AXI panic modes for the HVS [ Upstream commit 014eccc9da7bfc76a3107fceea37dd60f1d63630 ] The HVS can change AXI request mode based on how full the COB FIFOs are. Until now the vc4 driver has been relying on the firmware to have set these to sensible values. With HVS channel 2 now being used for live video, change the panic mode for all channels to be explicitly set by the driver, and the same for all channels. Reviewed-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-7-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson Signed-off-by: Sasha Levin --- drivers/gpu/drm/vc4/vc4_hvs.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c index 3856ac289d380..69b2936a5f4ad 100644 --- a/drivers/gpu/drm/vc4/vc4_hvs.c +++ b/drivers/gpu/drm/vc4/vc4_hvs.c @@ -729,6 +729,17 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data) dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1); dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2); + /* Set AXI panic mode. + * VC4 panics when < 2 lines in FIFO. + * VC5 panics when less than 1 line in the FIFO. + */ + dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK | + SCALER_DISPCTRL_PANIC1_MASK | + SCALER_DISPCTRL_PANIC2_MASK); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2); + HVS_WRITE(SCALER_DISPCTRL, dispctrl); ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -- 2.47.3