From d53bdaae894768eccff55327d379e8c033ce30d8 Mon Sep 17 00:00:00 2001 From: Krishna Kurapati Date: Tue, 11 Nov 2025 12:50:24 +0530 Subject: [PATCH] dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state Update the bindings to support reading ID state and VBUS, as per the HD3SS3220 data sheet. The ID pin is kept high if VBUS is not at VSafe0V and asserted low once VBUS is at VSafe0V, enforcing the Type-C requirement that VBUS must be at VSafe0V before re-enabling VBUS. Add id-gpios property to describe the input gpio for USB ID pin. Reviewed-by: Rob Herring (Arm) Signed-off-by: Krishna Kurapati Link: https://patch.msgid.link/20251111072025.2199142-2-krishna.kurapati@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index bec1c8047bc05..06099e93c6c30 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -25,6 +25,14 @@ properties: interrupts: maxItems: 1 + id-gpios: + description: + An input gpio for USB ID pin. Upon detecting a UFP device, HD3SS3220 + will keep ID pin high if VBUS is not at VSafe0V. Once VBUS is at VSafe0V, + the HD3SS3220 will assert ID pin low. This is done to enforce Type-C + requirement that VBUS must be at VSafe0V before re-enabling VBUS. + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports description: OF graph bindings (specified in bindings/graph.txt) that model -- 2.47.3