From f72b9aa821a2bfe4b6dfec4be19f264d0673b008 Mon Sep 17 00:00:00 2001 From: Jay Chen Date: Thu, 17 Jul 2025 10:31:07 +0300 Subject: [PATCH] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command There is a subtle contradiction between sections of the xHCI 1.2 spec regarding the initialization of Input Endpoint Context fields. Section 4.8.2 ("Endpoint Context Initialization") states that all fields should be initialized to 0. However, Section 6.2.3 ("Endpoint Context", p.453) specifies that the Average TRB Length (avg_trb_len) field shall be greater than 0, and explicitly notes (p.454): "Software shall set Average TRB Length to '8' for control endpoints." Strictly setting all fields to 0 during initialization conflicts with the specific recommendation for control endpoints. In practice, setting avg_trb_len = 0 is not meaningful for the hardware/firmware, as the value is used for bandwidth calculation. Motivation: Our company is developing a custom Virtual xHC hardware platform that strictly follows the xHCI spec and its recommendations. During validation, we observed that enumeration fails and a parameter error (TRB Completion Code = 5) is reported if avg_trb_len for EP0 is not set to 8 as recommended by Section 6.2.3. This demonstrates the importance of assigning a meaningful, non-zero value to avg_trb_len, even in virtualized or emulated environments. This patch explicitly sets avg_trb_len to 8 for EP0 in xhci_setup_addressable_virt_dev(), as recommended in Section 6.2.3, to prevent potential issues with xHCI host controllers that enforce the spec strictly. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220033 Signed-off-by: Jay Chen Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250717073107.488599-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 6680afa4f5963..07289333a1e8f 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1195,6 +1195,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma | dev->eps[0].ring->cycle_state); + ep0_ctx->tx_info = cpu_to_le32(EP_AVG_TRB_LENGTH(8)); + trace_xhci_setup_addressable_virt_device(dev); /* Steps 7 and 8 were done in xhci_alloc_virt_device() */ -- 2.47.2