From fffedfece2b46bb99b00740697f6c0c874de3cf4 Mon Sep 17 00:00:00 2001 From: "chunzhi.lin" Date: Thu, 7 May 2026 12:02:20 +0800 Subject: [PATCH] net: phy: motorcomm: use device properties for firmware tuning The Motorcomm PHY driver reads optional firmware properties via of_property_read_*() from phydev->mdio.dev.of_node. This works for Device Tree based systems, but causes ACPI platforms to ignore the same properties when they are supplied through _DSD. As a result, ACPI-described Motorcomm PHY devices fall back to default settings instead of applying firmware-provided tuning such as rx/tx internal delay, drive strength, clock output frequency, and optional boolean controls like auto-sleep-disabled, keep-pll-enabled, and tx clock inversion. Switch these lookups to device_property_read_*() so the driver uses the generic firmware node interface and can consume the same property names from either Device Tree or ACPI. This keeps the existing DT behavior unchanged while allowing ACPI platforms to honor PHY configuration from firmware. We have completed testing on Sophgo RISC-V architecture server SD3-10. This server has a 64-core Thead C920 CPU whose DWMAC is connected to Motorcomm's PHY YT8531. This server supports UEFI boot and it would like to use the ACPI table. Signed-off-by: chunzhi.lin Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260507040221.3679454-2-linchunzhi0@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/motorcomm.c | 41 ++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 21 deletions(-) diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 4d62f7b362128..708491bc198a7 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #define PHY_ID_YT8511 0x0000010a #define PHY_ID_YT8521 0x0000011a @@ -843,12 +843,12 @@ static u32 ytphy_get_delay_reg_value(struct phy_device *phydev, u16 *rxc_dly_en, u32 dflt) { - struct device_node *node = phydev->mdio.dev.of_node; + struct device *dev = &phydev->mdio.dev; int tb_size_half = tb_size / 2; u32 val; int i; - if (of_property_read_u32(node, prop_name, &val)) + if (device_property_read_u32(dev, prop_name, &val)) goto err_dts_val; /* when rxc_dly_en is NULL, it is get the delay for tx, only half of @@ -996,12 +996,12 @@ static int yt8531_get_ds_map(struct phy_device *phydev, u32 cur) static int yt8531_set_ds(struct phy_device *phydev) { - struct device_node *node = phydev->mdio.dev.of_node; + struct device *dev = &phydev->mdio.dev; u32 ds_field_low, ds_field_hi, val; int ret, ds; /* set rgmii rx clk driver strength */ - if (!of_property_read_u32(node, "motorcomm,rx-clk-drv-microamp", &val)) { + if (!device_property_read_u32(dev, "motorcomm,rx-clk-drv-microamp", &val)) { ds = yt8531_get_ds_map(phydev, val); if (ds < 0) return dev_err_probe(&phydev->mdio.dev, ds, @@ -1018,7 +1018,7 @@ static int yt8531_set_ds(struct phy_device *phydev) return ret; /* set rgmii rx data driver strength */ - if (!of_property_read_u32(node, "motorcomm,rx-data-drv-microamp", &val)) { + if (!device_property_read_u32(dev, "motorcomm,rx-data-drv-microamp", &val)) { ds = yt8531_get_ds_map(phydev, val); if (ds < 0) return dev_err_probe(&phydev->mdio.dev, ds, @@ -1051,7 +1051,6 @@ static int yt8531_set_ds(struct phy_device *phydev) */ static int yt8521_probe(struct phy_device *phydev) { - struct device_node *node = phydev->mdio.dev.of_node; struct device *dev = &phydev->mdio.dev; struct yt8521_priv *priv; int chip_config; @@ -1101,7 +1100,7 @@ static int yt8521_probe(struct phy_device *phydev) return ret; } - if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) + if (device_property_read_u32(dev, "motorcomm,clk-out-frequency-hz", &freq)) freq = YTPHY_DTS_OUTPUT_CLK_DIS; if (phydev->drv->phy_id == PHY_ID_YT8521) { @@ -1169,11 +1168,11 @@ static int yt8521_probe(struct phy_device *phydev) static int yt8531_probe(struct phy_device *phydev) { - struct device_node *node = phydev->mdio.dev.of_node; + struct device *dev = &phydev->mdio.dev; u16 mask, val; u32 freq; - if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) + if (device_property_read_u32(dev, "motorcomm,clk-out-frequency-hz", &freq)) freq = YTPHY_DTS_OUTPUT_CLK_DIS; switch (freq) { @@ -1665,7 +1664,7 @@ static int yt8521_resume(struct phy_device *phydev) */ static int yt8521_config_init(struct phy_device *phydev) { - struct device_node *node = phydev->mdio.dev.of_node; + struct device *dev = &phydev->mdio.dev; int old_page; int ret = 0; @@ -1680,7 +1679,7 @@ static int yt8521_config_init(struct phy_device *phydev) goto err_restore_page; } - if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { + if (device_property_read_bool(dev, "motorcomm,auto-sleep-disabled")) { /* disable auto sleep */ ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, YT8521_ESC1R_SLEEP_SW, 0); @@ -1688,7 +1687,7 @@ static int yt8521_config_init(struct phy_device *phydev) goto err_restore_page; } - if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { + if (device_property_read_bool(dev, "motorcomm,keep-pll-enabled")) { /* enable RXC clock when no wire plug */ ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, YT8521_CGR_RX_CLK_EN, 0); @@ -1801,14 +1800,14 @@ static int yt8521_led_hw_control_get(struct phy_device *phydev, u8 index, static int yt8531_config_init(struct phy_device *phydev) { - struct device_node *node = phydev->mdio.dev.of_node; + struct device *dev = &phydev->mdio.dev; int ret; ret = ytphy_rgmii_clk_delay_config_with_lock(phydev); if (ret < 0) return ret; - if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { + if (device_property_read_bool(dev, "motorcomm,auto-sleep-disabled")) { /* disable auto sleep */ ret = ytphy_modify_ext_with_lock(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, @@ -1817,7 +1816,7 @@ static int yt8531_config_init(struct phy_device *phydev) return ret; } - if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { + if (device_property_read_bool(dev, "motorcomm,keep-pll-enabled")) { /* enable RXC clock when no wire plug */ ret = ytphy_modify_ext_with_lock(phydev, YT8521_CLOCK_GATING_REG, @@ -1844,7 +1843,7 @@ static int yt8531_config_init(struct phy_device *phydev) */ static void yt8531_link_change_notify(struct phy_device *phydev) { - struct device_node *node = phydev->mdio.dev.of_node; + struct device *dev = &phydev->mdio.dev; bool tx_clk_1000_inverted = false; bool tx_clk_100_inverted = false; bool tx_clk_10_inverted = false; @@ -1852,17 +1851,17 @@ static void yt8531_link_change_notify(struct phy_device *phydev) u16 val = 0; int ret; - if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled")) + if (device_property_read_bool(dev, "motorcomm,tx-clk-adj-enabled")) tx_clk_adj_enabled = true; if (!tx_clk_adj_enabled) return; - if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted")) + if (device_property_read_bool(dev, "motorcomm,tx-clk-10-inverted")) tx_clk_10_inverted = true; - if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted")) + if (device_property_read_bool(dev, "motorcomm,tx-clk-100-inverted")) tx_clk_100_inverted = true; - if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted")) + if (device_property_read_bool(dev, "motorcomm,tx-clk-1000-inverted")) tx_clk_1000_inverted = true; if (phydev->speed < 0) -- 2.47.3