From 726bb8e0e2fca96a160b3abbbf8e18227749cc27 Mon Sep 17 00:00:00 2001 From: Nikolay March Date: Sun, 4 May 2025 08:15:12 +0300 Subject: [PATCH] mediatek: filogic: add support for SNR-CPE-AX2 SOC: MediaTek MT7981b RAM: 256MB DDR3 FLASH: 128MB SPI-NAND (Winbond W25N01GV) WIFI: Mediatek MT7981b DBDC 802.11ax 2.4/5 GHz ETH: MediaTek MT7531 Switch UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Interface MAC Algorithm LAN 8C:AE:DB:2C:xx:xx label WAN 8C:AE:DB:2C:xx:xx label +1 WLAN 2.4G 8C:AE:DB:2C:xx:xx label +2 WLAN 5G 8C:AE:DB:2C:xx:xx label +3 Installation -------------------Install openwrt image-------------------------------: Set a static ip on the ethernet interface of your PC. (ip address: 192.168.1.254, subnet mask:255.255.255.0) . Download the OpenWrt uboot image (openwrt-mediatek-filogic-snr_cpe-ax2-bl31-uboot.fip). SSH/SCP opened by default on the stock firmware (3.0.1). Username: Admin, default password: Admin. Check it on the bottom of the router. Copy uboot image using SCP (WinSCP) to /tmp dir on SNR-CPE-AX2. Download recovery file. openwrt-mediatek-filogic-snr_snr-cpe-ax2-initramfs-recovery.itb. Copy the recovery image to a TFTP server reachable at 192.168.1.254/24. Open ssh shell to the SNR-CPE-AX2. Run commands: mtd write \ /tmp/openwrt-mediatek-filogic-snr_snr-cpe-ax2-bl31-uboot.fip FIP reboot Wait until recovery boot. Open web 192.168.1.1 and do sysupgrade by openwrt-mediatek-filogic-snr_cpe-ax2-squashfs-sysupgrade.itb Signed-off-by: Nikolay March Link: https://github.com/openwrt/openwrt/pull/18700 Signed-off-by: Hauke Mehrtens --- package/boot/uboot-mediatek/Makefile | 13 + .../patches/463-add-snr-snr-cpe-ax2.patch | 350 ++++++++++++++++++ .../uboot-envtools/files/mediatek_filogic | 1 + .../mediatek/dts/mt7981b-snr-snr-cpe-ax2.dts | 340 +++++++++++++++++ .../filogic/base-files/etc/board.d/01_leds | 3 +- .../base-files/lib/upgrade/platform.sh | 1 + target/linux/mediatek/image/filogic.mk | 25 ++ 7 files changed, 732 insertions(+), 1 deletion(-) create mode 100644 package/boot/uboot-mediatek/patches/463-add-snr-snr-cpe-ax2.patch create mode 100644 target/linux/mediatek/dts/mt7981b-snr-snr-cpe-ax2.dts diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index b508800a66d..341e8df3651 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -461,6 +461,18 @@ define U-Boot/mt7981_qihoo_360t7 DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 endef +define U-Boot/mt7981_snr_snr-cpe-ax2 + NAME:=SNR SNR-CPE-AX2 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=snr_snr-cpe-ax2 + UBOOT_CONFIG:=mt7981_snr_snr-cpe-ax2 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr3 + DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 +endef + define U-Boot/mt7981_xiaomi_mi-router-ax3000t NAME:=Xiaomi Router AX3000T BUILD_SUBTARGET:=filogic @@ -899,6 +911,7 @@ UBOOT_TARGETS := \ mt7981_rfb-snfi \ mt7981_routerich_ax3000 \ mt7981_qihoo_360t7 \ + mt7981_snr_snr-cpe-ax2 \ mt7981_xiaomi_mi-router-ax3000t \ mt7981_xiaomi_mi-router-wr30u \ mt7986_bananapi_bpi-r3-emmc \ diff --git a/package/boot/uboot-mediatek/patches/463-add-snr-snr-cpe-ax2.patch b/package/boot/uboot-mediatek/patches/463-add-snr-snr-cpe-ax2.patch new file mode 100644 index 00000000000..f26beb78fc1 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/463-add-snr-snr-cpe-ax2.patch @@ -0,0 +1,350 @@ +--- /dev/null ++++ b/configs/mt7981_snr_snr-cpe-ax2_defconfig +@@ -0,0 +1,106 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-snr_snr-cpe-ax2" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-snr_snr-cpe-ax2.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="defenvs/snr_snr-cpe-ax2_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_SERIAL_RX_BUFFER=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/arch/arm/dts/mt7981-snr_snr-cpe-ax2.dts +@@ -0,0 +1,177 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2025 ++ * Author: Nikolay March ++ */ ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "SNR SNR-CPE-AX2"; ++ compatible = "snr,snr-cpe-ax2", "mediatek,mt7981"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ button-0 { ++ label = "mesh"; ++ linux,code = ; ++ gpios = <&gpio 0 GPIO_ACTIVE_LOW>; ++ }; ++ ++ button-1 { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-0 { ++ label = "red:status"; ++ gpios = <&gpio 4 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-1 { ++ label = "red:status_1"; ++ gpios = <&gpio 5 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-2 { ++ label = "blue:wlan_2ghz"; ++ gpios = <&gpio 6 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-3 { ++ label = "blue:wlan_5ghz"; ++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-4 { ++ label = "blue:status"; ++ gpios = <&gpio 9 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-5 { ++ label = "blue:wan"; ++ gpios = <&gpio 10 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-6 { ++ label = "blue:status_1"; ++ gpios = <&gpio 11 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "BL2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "u-boot-env (unused)"; ++ reg = <0x100000 0x80000>; ++ }; ++ ++ partition@160000 { ++ label = "Factory"; ++ reg = <0x180000 0x200000>; ++ }; ++ ++ partition@380000 { ++ label = "FIP"; ++ reg = <0x380000 0x200000>; ++ }; ++ ++ partition@580000 { ++ label = "ubi"; ++ reg = <0x580000 0x7a80000>; ++ }; ++ }; ++ }; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/defenvs/snr_snr-cpe-ax2_env +@@ -0,0 +1,57 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-snr_snr-cpe-ax2-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-snr_snr-cpe-ax2-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-snr_snr-cpe-ax2-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-snr_snr-cpe-ax2-squashfs-sysupgrade.itb ++bootled_status=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off ++boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++check_buttons=if button reset ; then run boot_tftp ; fi ++ethaddr_factory=mtd read Factory 0x40080000 0xe000 0x20000 && env readmem -b ethaddr 0x40080000 0x6 ; setenv ethaddr_factory ++part_default=production ++part_recovery=recovery ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr ++mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" + diff --git a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic index 707988a3a86..e9dbde2aaf5 100644 --- a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic @@ -45,6 +45,7 @@ netis,nx31|\ nokia,ea0326gmp|\ qihoo,360t7|\ routerich,ax3000-ubootmod|\ +snr,snr-cpe-ax2|\ tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088|\ diff --git a/target/linux/mediatek/dts/mt7981b-snr-snr-cpe-ax2.dts b/target/linux/mediatek/dts/mt7981b-snr-snr-cpe-ax2.dts new file mode 100644 index 00000000000..bdf3e76dd5a --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-snr-snr-cpe-ax2.dts @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include +#include +#include + +#include "mt7981.dtsi" + +/ { + model = "SNR SNR-CPE-AX2"; + compatible = "snr,snr-cpe-ax2", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + + led-boot = &led_status; + led-failsafe = &led_fail; + led-running = &led_status; + led-upgrade = &led_fail; + + serial0 = &uart0; + }; + + chosen { + rootdisk = <&ubi_fit_volume>; + stdout-path = "serial0:115200n8"; + bootargs-append = " root=/dev/fit0 rootwait"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "mesh"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + button-1 { + label = "reset"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_STATUS; // Second WAN led defined below. + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + + led_fail: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = ; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-3 { + color = ; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led_status: led-4 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-5 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-6 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_e000 0>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <0x1f>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env (unused)"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_e000: macaddr@e000 { + compatible = "mac-base"; + reg = <0xe000 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_e006: macaddr@e006 { + compatible = "mac-base"; + reg = <0xe006 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_100004: macaddr@100004 { + compatible = "mac-base"; + reg = <0x100004 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7a80000>; + compatible = "linux,ubi"; + + volumes { + ubi_fit_volume: ubi-volume-fit { + volname = "fit"; + }; + + ubi_ubootenv: ubi-volume-ubootenv { + volname = "ubootenv"; + }; + + ubi_ubootenv2: ubi-volume-ubootenv2 { + volname = "ubootenv2"; + }; + }; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "wan"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_e006 0>; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&ubi_ubootenv { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; + +&ubi_ubootenv2 { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + nvmem-cell-names = "eeprom"; + nvmem-cells = <&eeprom_factory_0>; + + band@0 { + reg = <0>; + nvmem-cells = <&macaddr_factory_4 0>; + nvmem-cell-names = "mac-address"; + }; + + band@1 { + reg = <1>; + nvmem-cells = <&macaddr_factory_100004 0>; + nvmem-cell-names = "mac-address"; + }; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 924234353da..c5ac708c28a 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -16,7 +16,8 @@ acer,predator-w6d) ucidef_set_led_netdev "internet" "INTERNET" "mdio-bus:06:amber:wan" "eth1" "link_10 link_100 link_1000 tx rx" ucidef_set_led_netdev "internet" "INTERNET" "mdio-bus:06:green:wan" "eth1" "link_2500 tx rx" ;; -asus,rt-ax52) +asus,rt-ax52|\ +snr,snr-cpe-ax2) ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx" ;; asus,tuf-ax4200) diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 3235c9ac53e..f61c8431f86 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -88,6 +88,7 @@ platform_do_upgrade() { netcore,n60-pro|\ qihoo,360t7|\ routerich,ax3000-ubootmod|\ + snr,snr-cpe-ax2|\ tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 7a0d4aa635f..d53b4e0bd08 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1576,6 +1576,31 @@ define Device/ruijie_rg-x60-pro endef TARGET_DEVICES += ruijie_rg-x60-pro +define Device/snr_snr-cpe-ax2 + DEVICE_VENDOR := SNR + DEVICE_MODEL := SNR-CPE-AX2 + DEVICE_DTS := mt7981b-snr-snr-cpe-ax2 + DEVICE_DTS_DIR := ../dts + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \ + append-metadata + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot snr_snr-cpe-ax2 +endef +TARGET_DEVICES += snr_snr-cpe-ax2 + define Device/tenbay_wr3000k DEVICE_VENDOR := Tenbay DEVICE_MODEL := WR3000K -- 2.47.2