]> git.ipfire.org Git - u-boot.git/shortlog
u-boot.git
2013-05-09  Marek Vasutbuild: Pull -DBUILD_TAG into separate ifdef
2013-05-09  Michal Simekgpio: Add support for microblaze xilinx GPIO
2013-05-09  Michal Simekmicroblaze: bootm: Add support for loading initrd
2013-05-09  Michal Simekmicroblaze: bootm: Fix coding style issues
2013-05-08  Kuan-Yu Kuonds32: Use sections header to obtain link symbols
2013-05-07  Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot-mmc
2013-05-06  Fabio Estevammmc: fsl_esdhc: Use calloc()
2013-05-06  Jaehoon Chungmmc: sdhci: return error when failed add_sdhci().
2013-05-06  Vipin Kumarsdhci: Add sdhci support for spear devices
2013-05-06  Davide Bonfantidavinci, mmc: Added a delay reading ext CSD register
2013-05-06  Che-Liang Chioummc: Split device init to decouple OCR-polling delay
2013-05-06  Marek Vasutarm: mxs: video: Enable MXS LCDIF on M28EVK
2013-05-06  Marek Vasutarm: mxs: Add MXS LCDIF driver
2013-05-06  Marek Vasutarm: mxs: Add LCDIF registers for i.MX233
2013-05-06  Marek Vasutarm: mxs: Add LCDIF clock configuration function
2013-05-06  Benoît Thébaudeauimx: mx35pdk: Fix MUX2_CTR GPIO
2013-05-06  Eric Nelsoncfb_console: flush FB cache at end of public functions
2013-05-06  Michal Simekfpga: Remove all CONFIG_SYS_* fpga related options
2013-05-06  Michal Simekfpga: Check device name against bitstream name
2013-05-06  Michal Simekfpga: zynq: Add support for loading bitstream
2013-05-06  Michal Simekcmd: fpga: Do not include net.h
2013-05-06  Michal Simekfpga: Change the first parameter in fpga_loadbitstream
2013-05-06  Michal Simekcmd: fpga: Move fpga_loadbitstream to fpga.c
2013-05-06  Michal Simekcmd: fpga: Clean coding style
2013-05-06  Michal Simekfpga: Fix debug message compilation error
2013-05-06  Michal Simekfpga: Clean coding style
2013-05-06  Marek Vasutarm: mxs: Preprocess u-boot.bd so they contain full...
2013-05-06  Marek Vasutarm: mx23: Fix VDDMEM misconfiguration
2013-05-06  Fabio Estevammxs: Explain why some mx23 DDR registers are not configured
2013-05-06  Fabio Estevammx23_olinuxino: Do not set voltage selection bit for...
2013-05-06  Fabio Estevammx23evk: Do not set voltage selection bit for SSP pads
2013-05-06  Fabio Estevammx23: Operate DDR voltage supply at 2.5V
2013-05-06  Vivek Gautamusb: common: Use a global definition for 'min3'
2013-05-06  Vivek Gautamusb: fix: Fixing Port status and feature number constants
2013-05-06  Vivek Gautamusb: hub: Parallelize power-cycling of root-hub ports
2013-05-05  Bo ShenUSB: ohci-at91: make OHCI work on at91sam9g10 SoC
2013-05-05  Vivek GautamUSB: SS: Add support for Super Speed USB interface
2013-05-05  Vivek Gautamusb: hub: Fix enumration timeout
2013-05-05  Vivek Gautamusb: Update device class in usb device's descriptor
2013-05-05  Vivek Gautamusb: hub: Power-cycle on root-hub ports
2013-05-05  Vivek GautamUSB: Some cleanup prior to USB 3.0 interface addition
2013-05-05  Vivek Gautamusb: common: Weed out USB_**_PRINTFs from usb framework
2013-05-05  Julius Wernerusb: Add new command to set USB 2.0 port test modes
2013-05-05  Łukasz Dałekh2200: Add board reset support
2013-05-05  Łukasz Dałekpxa: Add weak attribute to reset_cpu() function
2013-05-05  Mike Dunnmtd: nand: add driver for diskonchip g4 nand flash
2013-05-05  Mike Dunnpxa27x_udc: remove call to unimplemented set_GPIO_mode()
2013-05-05  Mike Dunnpxa_lcd: make lcd_enable() a weak pointer
2013-05-05  Mike Dunnpxa_lcd: add the ACX544AKN lcd device
2013-05-05  Mike Dunnlib: import bitrev library from the linux kernel
2013-05-05  Jim LinUSB: EHCI: Add weak functions to support new chip
2013-05-05  Benoît Thébaudeauimx: mx5: Remove legacy iomux support
2013-05-05  Benoît Thébaudeauimx: m53evk: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx53smd: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx53loco: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx53evk: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx53ard: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: ima3-mx53: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: iomux-v3: Add iomux-mx53.h
2013-05-05  Benoît Thébaudeauimx: vision2: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx51_efikamx/sb: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx51evk: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: iomux-v3: Add missing definitions to iomux-mx51.h
2013-05-05  Benoît Thébaudeauimx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
2013-05-05  Benoît Thébaudeauimx: mx35: Remove legacy iomux support
2013-05-05  Benoît Thébaudeauimx: woodburn: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx35pdk: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx35pdk: Fix WDOG_RST iomux function
2013-05-05  Benoît Thébaudeauimx: flea3: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: iomux-v3: Add iomux-mx35.h
2013-05-05  Benoît Thébaudeauimx: mx25: Remove legacy iomux support
2013-05-05  Benoît Thébaudeauimx: zmx25: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: tx25: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: mx25pdk: Fix GPIO assignments
2013-05-05  Benoît Thébaudeauimx: mx25pdk: Convert to iomux-v3
2013-05-05  Benoît Thébaudeauimx: iomux-v3: Add iomux-mx25.h
2013-05-05  Marek Vasutarm: mx5: Add support for DENX M53EVK
2013-05-05  Marek Vasutarm: mx5: Add NAND clock handling
2013-05-05  Marek Vasutarm: mx5: Add SPL support code to MX5
2013-05-05  Marek Vasutarm: imx: Pack u-boot.bin into uImage for SPL
2013-05-05  Marek Vasutnand: Add SPL_NAND support to mxc_nand_spl
2013-05-05  Marek Vasutimx: Align the imximage header and payload to multiples...
2013-05-05  Fabio Estevammxs: spl_mem_init: Change EMI port priority
2013-05-05  Fabio Estevammxs: spl_mem_init: Skip the initialization of some...
2013-05-05  Fabio Estevammxs: spl_mem_init: Remove erroneous DDR setting
2013-05-05  Fabio Estevammxs: spl_mem_init: Fix comment about start bit
2013-05-05  Fabio Estevammx23_olinuxino: Fix DDR pin iomux settings
2013-05-05  Fabio Estevammx23evk: Fix DDR pin iomux settings
2013-05-05  Fabio Estevammx23: Fix pad voltage selection bit
2013-05-03  Tom RiniP1022DS: Set CONFIG_SPL_MAX_SIZE directly
2013-05-02  Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2013-05-02  Shaohui Xiepowerpc/85xx: set USB2 default mode to 'device' for...
2013-05-02  Xu Jiuchengpowerpc/p1_p2_rdb_pc: Add a pin to reset the DDR chip...
2013-05-02  Cristian Sovaialapowerpc/mpc85xx: Changed LIODN offset values
2013-05-02  York Sunpowerpc/mpc85xx: Extend workaround for erratum DDR_A003...
2013-05-02  Shengzhou Liupowerpc/p1010rdb: add readme document for p1010rdb
2013-05-02  Shengzhou Liupowerpc/p1010rdb: Change flexcan compatible string
2013-05-02  Timur Tabipowerpc/85xx: add SerDes bank 4 lanes
2013-05-02  Zhicheng Fanqoriq/p1_p2_rdb_pc: USB device-tree fixups for P1020
2013-05-02  Poonam Aggrwaldoc/ramboot.mpc85xx: Documented the RAMBOOT for MPC85xx
next