net: fec: fix pinctrl default state restore order on resume

net: fec: fix pinctrl default state restore order on resume

In fec_resume(), fec_enet_clk_enable() is called before
pinctrl_pm_select_default_state() in the non-WoL path, inverting the
ordering used in fec_suspend() which correctly switches to the sleep
pinctrl state before disabling clocks.

For PHYs with the PHY_RST_AFTER_CLK_EN flag (e.g. TI DP83848 or
SMSC LAN87xx), fec_enet_clk_enable() triggers a hardware reset pulse
via the phy-reset GPIO. With the GPIO pin still in sleep pinctrl state
at that point, the GPIO write has no physical effect and the PHY never
receives the required reset after clock enable, leading to unreliable
link establishment after system resume.

Fix by restoring the default pinctrl state before enabling clocks,
making resume the proper mirror of suspend. The call is made
unconditionally: fec_suspend() only switches to the sleep pinctrl state
on the non-WoL path and leaves the pins in the default state when WoL
is enabled, so on a WoL resume the device is already in the default
state and pinctrl_pm_select_default_state() is a no-op.

Fixes: de40ed31b3c5 ("net: fec: add Wake-on-LAN support")
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260529-b4-fec-resume-pinctrl-order-v3-1-6eda0f592fca@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>