ath79: add support for Ubiquiti NanoStation Loco M (XW v2)

ath79: add support for Ubiquiti NanoStation Loco M (XW v2)

This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target with test date (label on the packaging, not the
device) later than October 2017.

To discover whether you have the new version, open a console on the
stock web interface and run `dmesg | grep AR803`. New versions print
AR8035, v1 shows AR8032.

Specifications:

 - AR9342 (rev 3) SoC @ 535 MHz
 - 64 MB RAM
 - 8 MB SPI flash
 - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
 - AR8035 switch
 - 2T2R 5 GHz radio, 22 dBm
 - 13 dBi built-in directional antenna
 - POWER/LAN green LEDs
 - 4x RSSI LEDs (red, orange, green, green)
 - UART (115200 8N1) on PCB

Flashing via TFTP:

 - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
   button on the device pressed
 - Power on the device via PoE (keep reset button pressed)
 - Keep pressing until LEDs flash alternatively LED1+LED3 =>
   LED2+LED4 => LED1+LED3, etc.
 - Release reset button
 - The device starts a TFTP server at 192.168.1.20
 - Set a static IP on the computer (e.g., 192.168.1.21/24)
 - Upload via tftp the factory image:
   $ tftp 192.168.1.20
   tftp> bin
   tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-v2-squashfs-factory.bin

MAC addresses: stored on Flash, in the "art" partition.

Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Link: https://github.com/openwrt/openwrt/pull/23912
Signed-off-by: Robert Marko <robert.marko@sartura.hr>