Add test for NSEC3PARAM not changed after restart

Add a test case where 'named' is restarted and ensure that an already
signed zone does not change its NSEC3 parameters.

The test case first tests the current zone and saves the used salt
value. Then after restart it checks if the salt (and other parameters)
are the same as before the restart.

This test case changes 'set_nsec3param'. This will now reset the salt
value, and when checking for NSEC3PARAM we will store the salt and
use it when testing the NXDOMAIN response. This does mean that for
every test case we now have to call 'set_nsec3param' explicitly (and
can not omit it because it is the same as the previous zone).

Finally, slightly changed some echo output to make debugging friendlier.

diff --git a/bin/tests/system/nsec3/tests.sh b/bin/tests/system/nsec3/tests.sh
index 2982be9188fa0d1ee0866790fc5fe8421714ca3b..62c49e5904352b58ef9dde99438db50c281f919c 100644 (file)
--- a/bin/tests/system/nsec3/tests.sh
+++ b/bin/tests/system/nsec3/tests.sh
@@ -41,8 +41,8 @@ set_nsec3param() {
        FLAGS=$1
        ITERATIONS=$2
        SALTLEN=$3
+       # Reset salt.
        SALT=""
-       test "$SALTLEN" = "0" && SALT="-"
 }
 
 # The apex NSEC3PARAM record indicates that it is signed.
@@ -115,6 +115,10 @@ _check_nsec3_nsec3param()
 {
        dig_with_opts +noquestion @$SERVER "${ZONE}" NSEC3PARAM > "dig.out.test$n.nsec3param.$ZONE" || return 1
        grep "${ZONE}.*0.*IN.*NSEC3PARAM.*1.*0.*${ITERATIONS}.*${SALT}" "dig.out.test$n.nsec3param.$ZONE" > /dev/null || return 1
+
+       if [ -z "$SALT" ]; then
+               SALT=`awk '$4 == "NSEC3PARAM" { print $8 }' dig.out.test$n.nsec3param.$ZONE`
+       fi
        return 0
 }
 
@@ -128,14 +132,14 @@ _check_nsec3_nxdomain()
 check_nsec3()
 {
        n=$((n+1))
-       echo_i "check NSEC3PARAM response for zone ${ZONE} ($n)"
+       echo_i "check that NSEC3PARAM 1 0 ${ITERATIONS} is published zone ${ZONE} ($n)"
        ret=0
        retry_quiet 10 _check_nsec3_nsec3param || log_error "bad NSEC3PARAM response for ${ZONE}"
        test "$ret" -eq 0 || echo_i "failed"
        status=$((status+ret))
 
        n=$((n+1))
-       echo_i "check NSEC3 response for zone ${ZONE} ($n)"
+       echo_i "check NXDOMAIN response has correct NSEC3 1 ${FLAGS} ${ITERATIONS} ${SALT} for zone ${ZONE} ($n)"
        ret=0
        retry_quiet 10 _check_nsec3_nxdomain || log_error "bad NXDOMAIN response for zone ${ZONE}"
        test "$ret" -eq 0 || echo_i "failed"
@@ -169,24 +173,28 @@ dnssec_verify
 
 # Zone: nsec3-change.kasp.
 set_zone_policy "nsec3-change.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
 echo_i "initial check zone ${ZONE}"
 check_nsec3
 dnssec_verify
 
 # Zone: nsec3-dynamic-change.kasp.
 set_zone_policy "nsec3-dynamic-change.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
 echo_i "initial check zone ${ZONE}"
 check_nsec3
 dnssec_verify
 
 # Zone: nsec3-to-nsec.kasp.
 set_zone_policy "nsec3-to-nsec.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
 echo_i "initial check zone ${ZONE}"
 check_nsec3
 dnssec_verify
 
 # Zone: nsec3-to-optout.kasp.
 set_zone_policy "nsec3-to-optout.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
 echo_i "initial check zone ${ZONE}"
 check_nsec3
 dnssec_verify
@@ -205,7 +213,6 @@ echo_i "initial check zone ${ZONE}"
 check_nsec3
 dnssec_verify
 
-
 # Reconfig named.
 echo_i "reconfig dnssec-policy to trigger nsec3 rollovers"
 copy_setports ns3/named2.conf.in ns3/named.conf
@@ -221,12 +228,14 @@ dnssec_verify
 
 # Zone: nsec3.kasp. (same)
 set_zone_policy "nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
 echo_i "check zone ${ZONE} after reconfig"
 check_nsec3
 dnssec_verify
 
 # Zone: nsec3-dyamic.kasp. (same)
 set_zone_policy "nsec3-dynamic.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
 echo_i "check zone ${ZONE} after reconfig"
 check_nsec3
 dnssec_verify
@@ -247,6 +256,7 @@ dnssec_verify
 
 # Zone: nsec3-to-nsec.kasp. (reconfigured)
 set_zone_policy "nsec3-to-nsec.kasp" "nsec"
+set_nsec3param "1" "11" "0"
 echo_i "check zone ${ZONE} after reconfig"
 check_nsec
 dnssec_verify
@@ -286,5 +296,33 @@ grep "zone uses dnssec-policy, use rndc dnssec command instead" rndc.signing.tes
 check_nsec3
 dnssec_verify
 
+# Test NSEC3 and NSEC3PARAM is the same after restart
+set_zone_policy "nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "check zone ${ZONE} before restart"
+check_nsec3
+dnssec_verify
+
+# Restart named, NSEC3 should stay the same.
+ret=0
+echo "stop ns3"
+$PERL ../stop.pl --use-rndc --port ${CONTROLPORT} nsec3 ${DIR} || ret=1
+test "$ret" -eq 0 || echo_i "failed"
+status=$((status+ret))
+
+ret=0
+echo "start ns3"
+start_server --noclean --restart --port ${PORT} nsec3 ${DIR}
+test "$ret" -eq 0 || echo_i "failed"
+status=$((status+ret))
+
+prevsalt="${SALT}"
+set_zone_policy "nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+SALT="${prevsalt}"
+echo_i "check zone ${ZONE} after restart has salt ${SALT}"
+check_nsec3
+dnssec_verify
+
 echo_i "exit status: $status"
 [ $status -eq 0 ] || exit 1