--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Xin Long <lucien.xin@gmail.com>
+Date: Mon, 12 Feb 2018 17:15:40 +0800
+Subject: bridge: check brport attr show in brport_show
+
+From: Xin Long <lucien.xin@gmail.com>
+
+
+[ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ]
+
+Now br_sysfs_if file flush doesn't have attr show. To read it will
+cause kernel panic after users chmod u+r this file.
+
+Xiong found this issue when running the commands:
+
+ ip link add br0 type bridge
+ ip link add type veth
+ ip link set veth0 master br0
+ chmod u+r /sys/devices/virtual/net/veth0/brport/flush
+ timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush
+
+kernel crashed with NULL a pointer dereference call trace.
+
+This patch is to fix it by return -EINVAL when brport_attr->show
+is null, just the same as the check for brport_attr->store in
+brport_store().
+
+Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table")
+Reported-by: Xiong Zhou <xzhou@redhat.com>
+Signed-off-by: Xin Long <lucien.xin@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/bridge/br_sysfs_if.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/net/bridge/br_sysfs_if.c
++++ b/net/bridge/br_sysfs_if.c
+@@ -229,6 +229,9 @@ static ssize_t brport_show(struct kobjec
+ struct brport_attribute *brport_attr = to_brport_attr(attr);
+ struct net_bridge_port *p = to_brport(kobj);
+
++ if (!brport_attr->show)
++ return -EINVAL;
++
+ return brport_attr->show(p, buf);
+ }
+
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Stefano Brivio <sbrivio@redhat.com>
+Date: Thu, 15 Feb 2018 09:46:03 +0100
+Subject: fib_semantics: Don't match route with mismatching tclassid
+
+From: Stefano Brivio <sbrivio@redhat.com>
+
+
+[ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ]
+
+In fib_nh_match(), if output interface or gateway are passed in
+the FIB configuration, we don't have to check next hops of
+multipath routes to conclude whether we have a match or not.
+
+However, we might still have routes with different realms
+matching the same output interface and gateway configuration,
+and this needs to cause the match to fail. Otherwise the first
+route inserted in the FIB will match, regardless of the realms:
+
+ # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2
+ # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4
+ # ip route list table 1234
+ 1.1.1.1 dev eth0 scope link realms 1/2
+ 1.1.1.1 dev eth0 scope link realms 3/4
+ # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4
+ # ip route list table 1234
+ 1.1.1.1 dev ens3 scope link realms 3/4
+
+whereas route with realms 3/4 should have been deleted instead.
+
+Explicitly check for fc_flow passed in the FIB configuration
+(this comes from RTA_FLOW extracted by rtm_to_fib_config()) and
+fail matching if it differs from nh_tclassid.
+
+The handling of RTA_FLOW for multipath routes later in
+fib_nh_match() is still needed, as we can have multiple RTA_FLOW
+attributes that need to be matched against the tclassid of each
+next hop.
+
+v2: Check that fc_flow is set before discarding the match, so
+ that the user can still select the first matching rule by
+ not specifying any realm, as suggested by David Ahern.
+
+Reported-by: Jianlin Shi <jishi@redhat.com>
+Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
+Acked-by: David Ahern <dsahern@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/fib_semantics.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/net/ipv4/fib_semantics.c
++++ b/net/ipv4/fib_semantics.c
+@@ -640,6 +640,11 @@ int fib_nh_match(struct fib_config *cfg,
+ fi->fib_nh, cfg))
+ return 1;
+ }
++#ifdef CONFIG_IP_ROUTE_CLASSID
++ if (cfg->fc_flow &&
++ cfg->fc_flow != fi->fib_nh->nh_tclassid)
++ return 1;
++#endif
+ if ((!cfg->fc_oif || cfg->fc_oif == fi->fib_nh->nh_oif) &&
+ (!cfg->fc_gw || cfg->fc_gw == fi->fib_nh->nh_gw))
+ return 0;
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Denis Du <dudenis2000@yahoo.ca>
+Date: Sat, 24 Feb 2018 16:51:42 -0500
+Subject: hdlc_ppp: carrier detect ok, don't turn off negotiation
+
+From: Denis Du <dudenis2000@yahoo.ca>
+
+
+[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ]
+
+Sometimes when physical lines have a just good noise to make the protocol
+handshaking fail, but the carrier detect still good. Then after remove of
+the noise, nobody will trigger this protocol to be start again to cause
+the link to never come back. The fix is when the carrier is still on, not
+terminate the protocol handshaking.
+
+Signed-off-by: Denis Du <dudenis2000@yahoo.ca>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/wan/hdlc_ppp.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wan/hdlc_ppp.c
++++ b/drivers/net/wan/hdlc_ppp.c
+@@ -574,7 +574,10 @@ static void ppp_timer(unsigned long arg)
+ ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
+ 0, NULL);
+ proto->restart_counter--;
+- } else
++ } else if (netif_carrier_ok(proto->dev))
++ ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
++ 0, NULL);
++ else
+ ppp_cp_event(proto->dev, proto->pid, TO_BAD, 0, 0,
+ 0, NULL);
+ break;
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Thu, 22 Feb 2018 16:55:34 +0100
+Subject: ipv6 sit: work around bogus gcc-8 -Wrestrict warning
+
+From: Arnd Bergmann <arnd@arndb.de>
+
+
+[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ]
+
+gcc-8 has a new warning that detects overlapping input and output arguments
+in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
+which is actually correct:
+
+net/ipv6/sit.c: In function 'sit_init_net':
+net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
+
+The problem here is that the logic detecting the memcpy() arguments finds them
+to be the same, but the conditional that tests for the input and output of
+ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.
+
+We know that netdev_priv(t->dev) is the same as t for a tunnel device,
+and comparing "dev" directly here lets the compiler figure out as well
+that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
+it no longer warns.
+
+This code is old, so Cc stable to make sure that we don't get the warning
+for older kernels built with new gcc.
+
+Cc: Martin Sebor <msebor@gmail.com>
+Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv6/sit.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/net/ipv6/sit.c
++++ b/net/ipv6/sit.c
+@@ -176,7 +176,7 @@ static void ipip6_tunnel_clone_6rd(struc
+ #ifdef CONFIG_IPV6_SIT_6RD
+ struct ip_tunnel *t = netdev_priv(dev);
+
+- if (t->dev == sitn->fb_tunnel_dev) {
++ if (dev == sitn->fb_tunnel_dev) {
+ ipv6_addr_set(&t->ip6rd.prefix, htonl(0x20020000), 0, 0, 0);
+ t->ip6rd.relay_prefix = 0;
+ t->ip6rd.prefixlen = 16;
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Jakub Kicinski <jakub.kicinski@netronome.com>
+Date: Mon, 12 Feb 2018 21:35:31 -0800
+Subject: net: fix race on decreasing number of TX queues
+
+From: Jakub Kicinski <jakub.kicinski@netronome.com>
+
+
+[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ]
+
+netif_set_real_num_tx_queues() can be called when netdev is up.
+That usually happens when user requests change of number of
+channels/rings with ethtool -L. The procedure for changing
+the number of queues involves resetting the qdiscs and setting
+dev->num_tx_queues to the new value. When the new value is
+lower than the old one, extra care has to be taken to ensure
+ordering of accesses to the number of queues vs qdisc reset.
+
+Currently the queues are reset before new dev->num_tx_queues
+is assigned, leaving a window of time where packets can be
+enqueued onto the queues going down, leading to a likely
+crash in the drivers, since most drivers don't check if TX
+skbs are assigned to an active queue.
+
+Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice")
+Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/core/dev.c | 11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -2183,8 +2183,11 @@ EXPORT_SYMBOL(netif_set_xps_queue);
+ */
+ int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
+ {
++ bool disabling;
+ int rc;
+
++ disabling = txq < dev->real_num_tx_queues;
++
+ if (txq < 1 || txq > dev->num_tx_queues)
+ return -EINVAL;
+
+@@ -2200,15 +2203,19 @@ int netif_set_real_num_tx_queues(struct
+ if (dev->num_tc)
+ netif_setup_tc(dev, txq);
+
+- if (txq < dev->real_num_tx_queues) {
++ dev->real_num_tx_queues = txq;
++
++ if (disabling) {
++ synchronize_net();
+ qdisc_reset_all_tx_gt(dev, txq);
+ #ifdef CONFIG_XPS
+ netif_reset_xps_queues_gt(dev, txq);
+ #endif
+ }
++ } else {
++ dev->real_num_tx_queues = txq;
+ }
+
+- dev->real_num_tx_queues = txq;
+ return 0;
+ }
+ EXPORT_SYMBOL(netif_set_real_num_tx_queues);
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Sabrina Dubroca <sd@queasysnail.net>
+Date: Mon, 26 Feb 2018 16:13:43 +0100
+Subject: net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68
+
+From: Sabrina Dubroca <sd@queasysnail.net>
+
+
+[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ]
+
+According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
+indicating an MTU below 68 should be rejected:
+
+ A host MUST never reduce its estimate of the Path MTU below 68
+ octets.
+
+and (talking about ICMP frag-needed's Next-Hop MTU field):
+
+ This field will never contain a value less than 68, since every
+ router "must be able to forward a datagram of 68 octets without
+ fragmentation".
+
+Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
+values, we can end up with a very large PMTU when (-1) is cast into u32.
+
+Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
+unsigned ints.
+
+Reported-by: Jianlin Shi <jishi@redhat.com>
+Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
+Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/route.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+--- a/net/ipv4/route.c
++++ b/net/ipv4/route.c
+@@ -126,10 +126,13 @@ static int ip_rt_redirect_silence __read
+ static int ip_rt_error_cost __read_mostly = HZ;
+ static int ip_rt_error_burst __read_mostly = 5 * HZ;
+ static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ;
+-static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20;
++static u32 ip_rt_min_pmtu __read_mostly = 512 + 20 + 20;
+ static int ip_rt_min_advmss __read_mostly = 256;
+
+ static int ip_rt_gc_timeout __read_mostly = RT_GC_TIMEOUT;
++
++static int ip_min_valid_pmtu __read_mostly = IPV4_MIN_MTU;
++
+ /*
+ * Interface to generic destination cache.
+ */
+@@ -2765,7 +2768,8 @@ static struct ctl_table ipv4_route_table
+ .data = &ip_rt_min_pmtu,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+- .proc_handler = proc_dointvec,
++ .proc_handler = proc_dointvec_minmax,
++ .extra1 = &ip_min_valid_pmtu,
+ },
+ {
+ .procname = "min_adv_mss",
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
+Date: Tue, 6 Feb 2018 14:48:32 +0100
+Subject: netlink: ensure to loop over all netns in genlmsg_multicast_allns()
+
+From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
+
+
+[ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ]
+
+Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
+case when commit 134e63756d5f was pushed.
+However, there was no reason to stop the loop if a netns does not have
+listeners.
+Returns -ESRCH only if there was no listeners in all netns.
+
+To avoid having the same problem in the future, I didn't take the
+assumption that nlmsg_multicast() returns only 0 or -ESRCH.
+
+Fixes: 134e63756d5f ("genetlink: make netns aware")
+CC: Johannes Berg <johannes.berg@intel.com>
+Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/netlink/genetlink.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+--- a/net/netlink/genetlink.c
++++ b/net/netlink/genetlink.c
+@@ -1118,6 +1118,7 @@ static int genlmsg_mcast(struct sk_buff
+ {
+ struct sk_buff *tmp;
+ struct net *net, *prev = NULL;
++ bool delivered = false;
+ int err;
+
+ for_each_net_rcu(net) {
+@@ -1129,14 +1130,21 @@ static int genlmsg_mcast(struct sk_buff
+ }
+ err = nlmsg_multicast(prev->genl_sock, tmp,
+ portid, group, flags);
+- if (err)
++ if (!err)
++ delivered = true;
++ else if (err != -ESRCH)
+ goto error;
+ }
+
+ prev = net;
+ }
+
+- return nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
++ err = nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
++ if (!err)
++ delivered = true;
++ else if (err != -ESRCH)
++ goto error;
++ return delivered ? 0 : -ESRCH;
+ error:
+ kfree_skb(skb);
+ return err;
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Guillaume Nault <g.nault@alphalink.fr>
+Date: Fri, 2 Mar 2018 18:41:16 +0100
+Subject: ppp: prevent unregistered channels from connecting to PPP units
+
+From: Guillaume Nault <g.nault@alphalink.fr>
+
+
+[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ]
+
+PPP units don't hold any reference on the channels connected to it.
+It is the channel's responsibility to ensure that it disconnects from
+its unit before being destroyed.
+In practice, this is ensured by ppp_unregister_channel() disconnecting
+the channel from the unit before dropping a reference on the channel.
+
+However, it is possible for an unregistered channel to connect to a PPP
+unit: register a channel with ppp_register_net_channel(), attach a
+/dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel
+with ppp_unregister_channel() and finally connect the /dev/ppp file to
+a PPP unit with ioctl(PPPIOCCONNECT).
+
+Once in this situation, the channel is only held by the /dev/ppp file,
+which can be released at anytime and free the channel without letting
+the parent PPP unit know. Then the ppp structure ends up with dangling
+pointers in its ->channels list.
+
+Prevent this scenario by forbidding unregistered channels from
+connecting to PPP units. This maintains the code logic by keeping
+ppp_unregister_channel() responsible from disconnecting the channel if
+necessary and avoids modification on the reference counting mechanism.
+
+This issue seems to predate git history (successfully reproduced on
+Linux 2.6.26 and earlier PPP commits are unrelated).
+
+Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ppp/ppp_generic.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/net/ppp/ppp_generic.c
++++ b/drivers/net/ppp/ppp_generic.c
+@@ -2952,6 +2952,15 @@ ppp_connect_channel(struct channel *pch,
+ goto outl;
+
+ ppp_lock(ppp);
++ spin_lock_bh(&pch->downl);
++ if (!pch->chan) {
++ /* Don't connect unregistered channels */
++ spin_unlock_bh(&pch->downl);
++ ppp_unlock(ppp);
++ ret = -ENOTCONN;
++ goto outl;
++ }
++ spin_unlock_bh(&pch->downl);
+ if (pch->file.hdrlen > ppp->file.hdrlen)
+ ppp->file.hdrlen = pch->file.hdrlen;
+ hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Tue, 27 Feb 2018 18:58:17 +0100
+Subject: s390/qeth: fix IPA command submission race
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ]
+
+If multiple IPA commands are build & sent out concurrently,
+fill_ipacmd_header() may assign a seqno value to a command that's
+different from what send_control_data() later assigns to this command's
+reply.
+This is due to other commands passing through send_control_data(),
+and incrementing card->seqno.ipa along the way.
+
+So one IPA command has no reply that's waiting for its seqno, while some
+other IPA command has multiple reply objects waiting for it.
+Only one of those waiting replies wins, and the other(s) times out and
+triggers a recovery via send_ipa_cmd().
+
+Fix this by making sure that the same seqno value is assigned to
+a command and its reply object.
+Do so immediately before submitting the command & while holding the
+irq_pending "lock", to produce nicely ascending seqnos.
+
+As a side effect, *all* IPA commands now use a reply object that's
+waiting for its actual seqno. Previously, early IPA commands that were
+submitted while the card was still DOWN used the "catch-all" IDX seqno.
+
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_core_main.c | 19 ++++++++++---------
+ 1 file changed, 10 insertions(+), 9 deletions(-)
+
+--- a/drivers/s390/net/qeth_core_main.c
++++ b/drivers/s390/net/qeth_core_main.c
+@@ -2068,25 +2068,26 @@ int qeth_send_control_data(struct qeth_c
+ }
+ reply->callback = reply_cb;
+ reply->param = reply_param;
+- if (card->state == CARD_STATE_DOWN)
+- reply->seqno = QETH_IDX_COMMAND_SEQNO;
+- else
+- reply->seqno = card->seqno.ipa++;
++
+ init_waitqueue_head(&reply->wait_q);
+- spin_lock_irqsave(&card->lock, flags);
+- list_add_tail(&reply->list, &card->cmd_waiter_list);
+- spin_unlock_irqrestore(&card->lock, flags);
+ QETH_DBF_HEX(CTRL, 2, iob->data, QETH_DBF_CTRL_LEN);
+
+ while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
+- qeth_prepare_control_data(card, len, iob);
+
+ if (IS_IPA(iob->data)) {
+ cmd = __ipa_cmd(iob);
++ cmd->hdr.seqno = card->seqno.ipa++;
++ reply->seqno = cmd->hdr.seqno;
+ event_timeout = QETH_IPA_TIMEOUT;
+ } else {
++ reply->seqno = QETH_IDX_COMMAND_SEQNO;
+ event_timeout = QETH_TIMEOUT;
+ }
++ qeth_prepare_control_data(card, len, iob);
++
++ spin_lock_irqsave(&card->lock, flags);
++ list_add_tail(&reply->list, &card->cmd_waiter_list);
++ spin_unlock_irqrestore(&card->lock, flags);
+
+ timeout = jiffies + event_timeout;
+
+@@ -2879,7 +2880,7 @@ static void qeth_fill_ipacmd_header(stru
+ memset(cmd, 0, sizeof(struct qeth_ipa_cmd));
+ cmd->hdr.command = command;
+ cmd->hdr.initiator = IPA_CMD_INITIATOR_HOST;
+- cmd->hdr.seqno = card->seqno.ipa;
++ /* cmd->hdr.seqno is set by qeth_send_control_data() */
+ cmd->hdr.adapter_type = qeth_get_ipa_adp_type(card->info.link_type);
+ cmd->hdr.rel_adapter_no = (__u8) card->info.portno;
+ if (card->options.layer2)
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Date: Fri, 9 Feb 2018 11:03:50 +0100
+Subject: s390/qeth: fix SETIP command handling
+
+From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+
+
+[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ]
+
+send_control_data() applies some special handling to SETIP v4 IPA
+commands. But current code parses *all* command types for the SETIP
+command code. Limit the command code check to IPA commands.
+
+Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command")
+Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/s390/net/qeth_core.h | 5 +++++
+ drivers/s390/net/qeth_core_main.c | 14 ++++++++------
+ 2 files changed, 13 insertions(+), 6 deletions(-)
+
+--- a/drivers/s390/net/qeth_core.h
++++ b/drivers/s390/net/qeth_core.h
+@@ -591,6 +591,11 @@ struct qeth_cmd_buffer {
+ void (*callback) (struct qeth_channel *, struct qeth_cmd_buffer *);
+ };
+
++static inline struct qeth_ipa_cmd *__ipa_cmd(struct qeth_cmd_buffer *iob)
++{
++ return (struct qeth_ipa_cmd *)(iob->data + IPA_PDU_HEADER_SIZE);
++}
++
+ /**
+ * definition of a qeth channel, used for read and write
+ */
+--- a/drivers/s390/net/qeth_core_main.c
++++ b/drivers/s390/net/qeth_core_main.c
+@@ -2054,7 +2054,7 @@ int qeth_send_control_data(struct qeth_c
+ unsigned long flags;
+ struct qeth_reply *reply = NULL;
+ unsigned long timeout, event_timeout;
+- struct qeth_ipa_cmd *cmd;
++ struct qeth_ipa_cmd *cmd = NULL;
+
+ QETH_CARD_TEXT(card, 2, "sendctl");
+
+@@ -2081,10 +2081,13 @@ int qeth_send_control_data(struct qeth_c
+ while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
+ qeth_prepare_control_data(card, len, iob);
+
+- if (IS_IPA(iob->data))
++ if (IS_IPA(iob->data)) {
++ cmd = __ipa_cmd(iob);
+ event_timeout = QETH_IPA_TIMEOUT;
+- else
++ } else {
+ event_timeout = QETH_TIMEOUT;
++ }
++
+ timeout = jiffies + event_timeout;
+
+ QETH_CARD_TEXT(card, 6, "noirqpnd");
+@@ -2109,9 +2112,8 @@ int qeth_send_control_data(struct qeth_c
+
+ /* we have only one long running ipassist, since we can ensure
+ process context of this command we can sleep */
+- cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+- if ((cmd->hdr.command == IPA_CMD_SETIP) &&
+- (cmd->hdr.prot_version == QETH_PROT_IPV4)) {
++ if (cmd && cmd->hdr.command == IPA_CMD_SETIP &&
++ cmd->hdr.prot_version == QETH_PROT_IPV4) {
+ if (!wait_event_timeout(reply->wait_q,
+ atomic_read(&reply->received), event_timeout))
+ goto time_err;
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Tommi Rantala <tommi.t.rantala@nokia.com>
+Date: Mon, 5 Feb 2018 21:48:14 +0200
+Subject: sctp: fix dst refcnt leak in sctp_v4_get_dst
+
+From: Tommi Rantala <tommi.t.rantala@nokia.com>
+
+
+[ Upstream commit 4a31a6b19f9ddf498c81f5c9b089742b7472a6f8 ]
+
+Fix dst reference count leak in sctp_v4_get_dst() introduced in commit
+410f03831 ("sctp: add routing output fallback"):
+
+When walking the address_list, successive ip_route_output_key() calls
+may return the same rt->dst with the reference incremented on each call.
+
+The code would not decrement the dst refcount when the dst pointer was
+identical from the previous iteration, causing the dst refcnt leak.
+
+Testcase:
+ ip netns add TEST
+ ip netns exec TEST ip link set lo up
+ ip link add dummy0 type dummy
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dev dummy0 netns TEST
+ ip link set dev dummy1 netns TEST
+ ip link set dev dummy2 netns TEST
+ ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0
+ ip netns exec TEST ip link set dummy0 up
+ ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1
+ ip netns exec TEST ip link set dummy1 up
+ ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2
+ ip netns exec TEST ip link set dummy2 up
+ ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3
+ ip netns del TEST
+
+In 4.4 and 4.9 kernels this results to:
+ [ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ [ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1
+ ...
+
+Fixes: 410f03831 ("sctp: add routing output fallback")
+Fixes: 0ca50d12f ("sctp: fix src address selection if using secondary addresses")
+Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
+Acked-by: Neil Horman <nhorman@tuxdriver.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sctp/protocol.c | 10 ++++------
+ 1 file changed, 4 insertions(+), 6 deletions(-)
+
+--- a/net/sctp/protocol.c
++++ b/net/sctp/protocol.c
+@@ -508,22 +508,20 @@ static void sctp_v4_get_dst(struct sctp_
+ if (IS_ERR(rt))
+ continue;
+
+- if (!dst)
+- dst = &rt->dst;
+-
+ /* Ensure the src address belongs to the output
+ * interface.
+ */
+ odev = __ip_dev_find(sock_net(sk), laddr->a.v4.sin_addr.s_addr,
+ false);
+ if (!odev || odev->ifindex != fl4->flowi4_oif) {
+- if (&rt->dst != dst)
++ if (!dst)
++ dst = &rt->dst;
++ else
+ dst_release(&rt->dst);
+ continue;
+ }
+
+- if (dst != &rt->dst)
+- dst_release(dst);
++ dst_release(dst);
+ dst = &rt->dst;
+ break;
+ }
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+Date: Mon, 5 Feb 2018 15:10:35 +0300
+Subject: sctp: fix dst refcnt leak in sctp_v6_get_dst()
+
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+
+
+[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ]
+
+When going through the bind address list in sctp_v6_get_dst() and
+the previously found address is better ('matchlen > bmatchlen'),
+the code continues to the next iteration without releasing currently
+held destination.
+
+Fix it by releasing 'bdst' before continue to the next iteration, and
+instead of introducing one more '!IS_ERR(bdst)' check for dst_release(),
+move the already existed one right after ip6_dst_lookup_flow(), i.e. we
+shouldn't proceed further if we get an error for the route lookup.
+
+Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6")
+Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
+Acked-by: Neil Horman <nhorman@tuxdriver.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sctp/ipv6.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+--- a/net/sctp/ipv6.c
++++ b/net/sctp/ipv6.c
+@@ -323,8 +323,10 @@ static void sctp_v6_get_dst(struct sctp_
+ final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
+ bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
+
+- if (!IS_ERR(bdst) &&
+- ipv6_chk_addr(dev_net(bdst->dev),
++ if (IS_ERR(bdst))
++ continue;
++
++ if (ipv6_chk_addr(dev_net(bdst->dev),
+ &laddr->a.v6.sin6_addr, bdst->dev, 1)) {
+ if (!IS_ERR_OR_NULL(dst))
+ dst_release(dst);
+@@ -333,8 +335,10 @@ static void sctp_v6_get_dst(struct sctp_
+ }
+
+ bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
+- if (matchlen > bmatchlen)
++ if (matchlen > bmatchlen) {
++ dst_release(bdst);
+ continue;
++ }
+
+ if (!IS_ERR_OR_NULL(dst))
+ dst_release(dst);
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+Date: Fri, 9 Feb 2018 17:35:23 +0300
+Subject: sctp: verify size of a new chunk in _sctp_make_chunk()
+
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+
+
+[ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ]
+
+When SCTP makes INIT or INIT_ACK packet the total chunk length
+can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
+transmitting these packets, e.g. the crash on sending INIT_ACK:
+
+[ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
+ put:120156 head:000000007aa47635 data:00000000d991c2de
+ tail:0x1d640 end:0xfec0 dev:<NULL>
+...
+[ 597.976970] ------------[ cut here ]------------
+[ 598.033408] kernel BUG at net/core/skbuff.c:104!
+[ 600.314841] Call Trace:
+[ 600.345829] <IRQ>
+[ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
+[ 600.436934] skb_put+0x16c/0x200
+[ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp]
+[ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp]
+[ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
+[ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
+[ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp]
+[ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp]
+[ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
+[ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp]
+[ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
+[ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
+[ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
+[ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp]
+[ 601.233575] sctp_do_sm+0x182/0x560 [sctp]
+[ 601.284328] ? sctp_has_association+0x70/0x70 [sctp]
+[ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp]
+[ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp]
+...
+
+Here the chunk size for INIT_ACK packet becomes too big, mostly
+because of the state cookie (INIT packet has large size with
+many address parameters), plus additional server parameters.
+
+Later this chunk causes the panic in skb_put_data():
+
+ skb_packet_transmit()
+ sctp_packet_pack()
+ skb_put_data(nskb, chunk->skb->data, chunk->skb->len);
+
+'nskb' (head skb) was previously allocated with packet->size
+from u16 'chunk->chunk_hdr->length'.
+
+As suggested by Marcelo we should check the chunk's length in
+_sctp_make_chunk() before trying to allocate skb for it and
+discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
+
+Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
+Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com>
+Acked-by: Neil Horman <nhorman@tuxdriver.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/sctp/sm_make_chunk.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+--- a/net/sctp/sm_make_chunk.c
++++ b/net/sctp/sm_make_chunk.c
+@@ -1367,10 +1367,14 @@ static struct sctp_chunk *_sctp_make_chu
+ sctp_chunkhdr_t *chunk_hdr;
+ struct sk_buff *skb;
+ struct sock *sk;
++ int chunklen;
++
++ chunklen = sizeof(*chunk_hdr) + paylen;
++ if (chunklen > SCTP_MAX_CHUNK_LEN)
++ goto nodata;
+
+ /* No need to allocate LL here, as this is only a chunk. */
+- skb = alloc_skb(WORD_ROUND(sizeof(sctp_chunkhdr_t) + paylen),
+- GFP_ATOMIC);
++ skb = alloc_skb(chunklen, GFP_ATOMIC);
+ if (!skb)
+ goto nodata;
+
leds-do-not-overflow-sysfs-buffer-in-led_trigger_show.patch
x86-spectre-fix-an-error-message.patch
revert-led-core-fix-brightness-setting-when-setting-delay_off-0.patch
+bridge-check-brport-attr-show-in-brport_show.patch
+fib_semantics-don-t-match-route-with-mismatching-tclassid.patch
+hdlc_ppp-carrier-detect-ok-don-t-turn-off-negotiation.patch
+ipv6-sit-work-around-bogus-gcc-8-wrestrict-warning.patch
+net-fix-race-on-decreasing-number-of-tx-queues.patch
+net-ipv4-don-t-allow-setting-net.ipv4.route.min_pmtu-below-68.patch
+netlink-ensure-to-loop-over-all-netns-in-genlmsg_multicast_allns.patch
+ppp-prevent-unregistered-channels-from-connecting-to-ppp-units.patch
+udplite-fix-partial-checksum-initialization.patch
+sctp-fix-dst-refcnt-leak-in-sctp_v4_get_dst.patch
+sctp-fix-dst-refcnt-leak-in-sctp_v6_get_dst.patch
+s390-qeth-fix-setip-command-handling.patch
+s390-qeth-fix-ipa-command-submission-race.patch
+sctp-verify-size-of-a-new-chunk-in-_sctp_make_chunk.patch
--- /dev/null
+From foo@baz Thu Mar 8 10:22:29 PST 2018
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+Date: Thu, 15 Feb 2018 20:18:43 +0300
+Subject: udplite: fix partial checksum initialization
+
+From: Alexey Kodanev <alexey.kodanev@oracle.com>
+
+
+[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ]
+
+Since UDP-Lite is always using checksum, the following path is
+triggered when calculating pseudo header for it:
+
+ udp4_csum_init() or udp6_csum_init()
+ skb_checksum_init_zero_check()
+ __skb_checksum_validate_complete()
+
+The problem can appear if skb->len is less than CHECKSUM_BREAK. In
+this particular case __skb_checksum_validate_complete() also invokes
+__skb_checksum_complete(skb). If UDP-Lite is using partial checksum
+that covers only part of a packet, the function will return bad
+checksum and the packet will be dropped.
+
+It can be fixed if we skip skb_checksum_init_zero_check() and only
+set the required pseudo header checksum for UDP-Lite with partial
+checksum before udp4_csum_init()/udp6_csum_init() functions return.
+
+Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4")
+Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6")
+Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ include/net/udplite.h | 1 +
+ net/ipv4/udp.c | 5 +++++
+ net/ipv6/ip6_checksum.c | 5 +++++
+ 3 files changed, 11 insertions(+)
+
+--- a/include/net/udplite.h
++++ b/include/net/udplite.h
+@@ -62,6 +62,7 @@ static inline int udplite_checksum_init(
+ UDP_SKB_CB(skb)->cscov = cscov;
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ skb->ip_summed = CHECKSUM_NONE;
++ skb->csum_valid = 0;
+ }
+
+ return 0;
+--- a/net/ipv4/udp.c
++++ b/net/ipv4/udp.c
+@@ -1744,6 +1744,11 @@ static inline int udp4_csum_init(struct
+ err = udplite_checksum_init(skb, uh);
+ if (err)
+ return err;
++
++ if (UDP_SKB_CB(skb)->partial_cov) {
++ skb->csum = inet_compute_pseudo(skb, proto);
++ return 0;
++ }
+ }
+
+ return skb_checksum_init_zero_check(skb, proto, uh->check,
+--- a/net/ipv6/ip6_checksum.c
++++ b/net/ipv6/ip6_checksum.c
+@@ -73,6 +73,11 @@ int udp6_csum_init(struct sk_buff *skb,
+ err = udplite_checksum_init(skb, uh);
+ if (err)
+ return err;
++
++ if (UDP_SKB_CB(skb)->partial_cov) {
++ skb->csum = ip6_compute_pseudo(skb, proto);
++ return 0;
++ }
+ }
+
+ /* To support RFC 6936 (allow zero checksum in UDP/IPV6 for tunnels)
projects / thirdparty / kernel / stable-queue.git / commitdiff
