pwm: imx-tpm: Use correct MODULO value for EPWM mode

commit cc6a931d1f3b412263d515fd93b21fc0ca5147fe upstream.

The modulo register defines the period of the edge-aligned PWM mode
(which is the only mode implemented). The reference manual states:
"The EPWM period is determined by (MOD + 0001h) ..." So the value that
is written to the MOD register must therefore be one less than the
calculated period length. Return -EINVAL if the calculated length is
already zero.
A correct MODULO value is particularly relevant if the PWM has to output
a high frequency due to a low period value.

Fixes: 738a1cfec2ed ("pwm: Add i.MX TPM PWM driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Link: https://lore.kernel.org/r/1a3890966d68b9f800d457cbf095746627495e18.camel@iris-sensing.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
index 871527b78aa46272aead803b57106e9377677654..6e8db0acf71db0488ba173b69acc099b7df35da1 100644 (file)
--- a/drivers/pwm/pwm-imx-tpm.c
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -106,7 +106,9 @@ static int pwm_imx_tpm_round_state(struct pwm_chip *chip,
        p->prescale = prescale;
 
        period_count = (clock_unit + ((1 << prescale) >> 1)) >> prescale;
-       p->mod = period_count;
+       if (period_count == 0)
+               return -EINVAL;
+       p->mod = period_count - 1;
 
        /* calculate real period HW can support */
        tmp = (u64)period_count << prescale;