A query for www.example.org to [::1]:47806 should have rcode NXDOMAIN
#
- # Test for statistics
+ # Test1 for Xfrout statistics
+ #
+ check initial statistics not containing example.org for Xfrout with cmdctl port 47804
+
#
- # check for initial statistics
+ # Test2 for Xfrin statistics
#
- Then wait for new bind10 stderr message ZONEMGR_RECEIVE_NOTIFY
- Then wait for new bind10 stderr message XFRIN_XFR_TRANSFER_STARTED
- Then wait for new bind10 stderr message XFRIN_TRANSFER_SUCCESS not XFRIN_XFR_PROCESS_FAILURE
- Then wait for new bind10 stderr message ZONEMGR_RECEIVE_XFRIN_SUCCESS
- Then wait 5 times for new master stderr message NOTIFY_OUT_SENDING_NOTIFY
- Then wait for new master stderr message NOTIFY_OUT_RETRY_EXCEEDED
+ check initial statistics not containing example.org for Xfrin
+
+ When I send bind10 with cmdctl port 47804 the command Xfrout notify example.org IN
+ Then wait for new master stderr message XFROUT_NOTIFY_COMMAND
+ Then wait for new bind10 stderr message AUTH_RECEIVED_NOTIFY
++ # From this point we can't reliably 'wait for new' because the ordering
++ # of logs from different processes is unpredictable. But these
++ # should be okay in this case.
++ Then wait for bind10 stderr message ZONEMGR_RECEIVE_NOTIFY
++ Then wait for bind10 stderr message XFRIN_XFR_TRANSFER_STARTED
++ Then wait for bind10 stderr message XFRIN_TRANSFER_SUCCESS not XFRIN_XFR_PROCESS_FAILURE
++ Then wait for bind10 stderr message ZONEMGR_RECEIVE_XFRIN_SUCCESS
++ Then wait for master stderr message NOTIFY_OUT_REPLY_RECEIVED
+
+ A query for www.example.org to [::1]:47806 should have rcode NOERROR
++ # Make sure handling statistics command handling checked below is
++ # after this query
++ And wait for bind10 stderr message AUTH_SEND_NORMAL_RESPONSE
+
+ #
+ # Test3 for Xfrout statistics
+ #
+ # check statistics change
+ #
+
+ # wait until the last stats requesting is finished
When I query statistics zones of bind10 module Xfrout with cmdctl port 47804
++ # note that this does not 100% guarantee the stats updated Xfrout
++ # statistics. But there doesn't seem to be a better log message that
++ # suggests this event.
+ wait for new master stderr message XFROUT_RECEIVED_GETSTATS_COMMAND
last bindctl output should not contain "error"
- last bindctl output should not contain "example.org."
- Then the statistics counter notifyoutv4 for the zone _SERVER_ should be 0
- Then the statistics counter notifyoutv6 for the zone _SERVER_ should be 0
- Then the statistics counter xfrrej for the zone _SERVER_ should be 0
- Then the statistics counter xfrreqdone for the zone _SERVER_ should be 0
- When I query statistics ixfr_running of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter ixfr_running should be 0
-
- When I query statistics axfr_running of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter axfr_running should be 0
+ When I query statistics zones of bind10 module Xfrout with cmdctl port 47804
+ The statistics counters are 0 in category .Xfrout.zones except for the following items
+ | item_name | item_value |
- | _SERVER_.notifyoutv6 | 5 |
++ | _SERVER_.notifyoutv6 | 1 |
+ | _SERVER_.xfrreqdone | 1 |
- | example.org..notifyoutv6 | 5 |
++ | example.org..notifyoutv6 | 1 |
+ | example.org..xfrreqdone | 1 |
When I query statistics socket of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter open should be between 0 and 1
- Then the statistics counter openfail should be 0
- Then the statistics counter close should be 0
- Then the statistics counter bindfail should be 0
- Then the statistics counter acceptfail should be 0
- Then the statistics counter accept should be 0
- Then the statistics counter senderr should be 0
- Then the statistics counter recverr should be 0
+ The statistics counters are 0 in category .Xfrout.socket.unixdomain except for the following items
+ | item_name | item_value |
+ | open | 1 |
+ | accept | 1 |
+
+ #
+ # Test4 for Xfrin statistics
+ #
+ # check statistics change
+ #
+
+ # wait until the last stats requesting is finished
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ wait for new bind10 stderr message XFRIN_RECEIVED_COMMAND
+ last bindctl output should not contain "error"
+
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ The statistics counters are 0 in category .Xfrin.zones except for the following items
+ | item_name | item_value | min_value |
+ | _SERVER_.soaoutv6 | 1 | |
+ | _SERVER_.axfrreqv6 | 1 | |
+ | _SERVER_.xfrsuccess | 1 | |
+ | _SERVER_.last_axfr_duration | | 0.0 |
+ | example.org..soaoutv6 | 1 | |
+ | example.org..axfrreqv6 | 1 | |
+ | example.org..xfrsuccess | 1 | |
+ | example.org..last_axfr_duration | | 0.0 |
+
+ #
+ # Test for handling incoming notify only in IPv4
+ #
+ Scenario: Handle incoming notify (IPv4)
+ Given I have bind10 running with configuration xfrin/retransfer_master_v4.conf with cmdctl port 47804 as master
+ And wait for master stderr message BIND10_STARTED_CC
+ And wait for master stderr message CMDCTL_STARTED
+ And wait for master stderr message AUTH_SERVER_STARTED
+ And wait for master stderr message XFROUT_STARTED
+ And wait for master stderr message ZONEMGR_STARTED
+ And wait for master stderr message STATS_STARTING
+
+ And I have bind10 running with configuration xfrin/retransfer_slave_notify_v4.conf
+ And wait for bind10 stderr message BIND10_STARTED_CC
+ And wait for bind10 stderr message CMDCTL_STARTED
+ And wait for bind10 stderr message AUTH_SERVER_STARTED
+ And wait for bind10 stderr message XFRIN_STARTED
+ And wait for bind10 stderr message ZONEMGR_STARTED
+
+ A query for www.example.org to 127.0.0.1:47806 should have rcode NXDOMAIN
+
+ #
+ # Test1 for Xfrout statistics
+ #
+ check initial statistics not containing example.org for Xfrout with cmdctl port 47804
+ #
+ # Test2 for Xfrin statistics
+ #
+ check initial statistics not containing example.org for Xfrin
When I send bind10 with cmdctl port 47804 the command Xfrout notify example.org IN
Then wait for new master stderr message XFROUT_NOTIFY_COMMAND
# statistics. But there doesn't seem to be a better log message that
# suggests this event.
wait for new master stderr message XFROUT_RECEIVED_GETSTATS_COMMAND
+ last bindctl output should not contain "error"
When I query statistics zones of bind10 module Xfrout with cmdctl port 47804
- last bindctl output should not contain "error"
- Then the statistics counter notifyoutv4 for the zone _SERVER_ should be 0
- Then the statistics counter notifyoutv4 for the zone example.org. should be 0
- Then the statistics counter notifyoutv6 for the zone _SERVER_ should be 1
- Then the statistics counter notifyoutv6 for the zone example.org. should be 1
- Then the statistics counter xfrrej for the zone _SERVER_ should be 0
- Then the statistics counter xfrrej for the zone example.org. should be 0
- Then the statistics counter xfrreqdone for the zone _SERVER_ should be 1
- Then the statistics counter xfrreqdone for the zone example.org. should be 1
+ The statistics counters are 0 in category .Xfrout.zones except for the following items
+ | item_name | item_value |
- | _SERVER_.notifyoutv4 | 5 |
++ | _SERVER_.notifyoutv4 | 1 |
+ | _SERVER_.xfrreqdone | 1 |
- | example.org..notifyoutv4 | 5 |
++ | example.org..notifyoutv4 | 1 |
+ | example.org..xfrreqdone | 1 |
When I query statistics socket of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter open should be 1
- Then the statistics counter openfail should be 0
- Then the statistics counter close should be 0
- Then the statistics counter bindfail should be 0
- Then the statistics counter acceptfail should be 0
- Then the statistics counter accept should be 1
- Then the statistics counter senderr should be 0
- Then the statistics counter recverr should be 0
+ The statistics counters are 0 in category .Xfrout.socket.unixdomain except for the following items
+ | item_name | item_value |
+ | open | 1 |
+ | accept | 1 |
+
+ #
+ # Test4 for Xfrin statistics
+ #
+ # check statistics change
+ #
+
+ # wait until the last stats requesting is finished
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ wait for new bind10 stderr message XFRIN_RECEIVED_COMMAND
+ last bindctl output should not contain "error"
+
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ The statistics counters are 0 in category .Xfrin.zones except for the following items
+ | item_name | item_value | min_value |
+ | _SERVER_.soaoutv4 | 1 | |
+ | _SERVER_.axfrreqv4 | 1 | |
+ | _SERVER_.xfrsuccess | 1 | |
+ | _SERVER_.last_axfr_duration | | 0.0 |
+ | example.org..soaoutv4 | 1 | |
+ | example.org..axfrreqv4 | 1 | |
+ | example.org..xfrsuccess | 1 | |
+ | example.org..last_axfr_duration | | 0.0 |
#
# Test for Xfr request rejected
A query for www.example.org to [::1]:47806 should have rcode NXDOMAIN
#
- # Test1 for statistics
+ # Test1 for Xfrout statistics
+ #
+ check initial statistics not containing example.org for Xfrout with cmdctl port 47804
+
+ #
+ # Test2 for Xfrin statistics
+ #
+ check initial statistics not containing example.org for Xfrin
+
+ #
+ # set transfer_acl rejection
+ # Local xfr requests from Xfrin module would be rejected here.
+ #
+ When I send bind10 the following commands with cmdctl port 47804
+ """
+ config set Xfrout/zone_config[0]/transfer_acl [{"action": "REJECT", "from": "::1"}]
+ config commit
+ """
+ last bindctl output should not contain Error
+
+ When I send bind10 with cmdctl port 47804 the command Xfrout notify example.org IN
+ Then wait for new master stderr message XFROUT_NOTIFY_COMMAND
+ Then wait for new bind10 stderr message AUTH_RECEIVED_NOTIFY
- Then wait for new bind10 stderr message ZONEMGR_RECEIVE_NOTIFY
- Then wait for new bind10 stderr message XFRIN_XFR_TRANSFER_STARTED
- Then wait for new bind10 stderr message XFRIN_XFR_TRANSFER_PROTOCOL_VIOLATION not XFRIN_XFR_TRANSFER_STARTED
- Then wait for new bind10 stderr message ZONEMGR_RECEIVE_XFRIN_FAILED not ZONEMGR_RECEIVE_XFRIN_SUCCESS
- Then wait 5 times for new master stderr message NOTIFY_OUT_SENDING_NOTIFY
- Then wait for new master stderr message NOTIFY_OUT_RETRY_EXCEEDED
++ # can't use 'wait for new' below.
++ Then wait for bind10 stderr message ZONEMGR_RECEIVE_NOTIFY
++ Then wait for bind10 stderr message XFRIN_XFR_TRANSFER_STARTED
++ Then wait for bind10 stderr message XFRIN_XFR_TRANSFER_PROTOCOL_VIOLATION not XFRIN_TRANSFER_SUCCESS
++ Then wait for bind10 stderr message ZONEMGR_RECEIVE_XFRIN_FAILED not ZONEMGR_RECEIVE_XFRIN_SUCCESS
++ Then wait for master stderr message NOTIFY_OUT_REPLY_RECEIVED
+
+ A query for www.example.org to [::1]:47806 should have rcode NXDOMAIN
+
+ #
+ # Test3 for Xfrout statistics
#
- # check for initial statistics
+ # check statistics change
#
+
+ # wait until the last stats requesting is finished
When I query statistics zones of bind10 module Xfrout with cmdctl port 47804
+ wait for new master stderr message XFROUT_RECEIVED_GETSTATS_COMMAND
last bindctl output should not contain "error"
- last bindctl output should not contain "example.org."
- Then the statistics counter notifyoutv4 for the zone _SERVER_ should be 0
- Then the statistics counter notifyoutv6 for the zone _SERVER_ should be 0
- Then the statistics counter xfrrej for the zone _SERVER_ should be 0
- Then the statistics counter xfrreqdone for the zone _SERVER_ should be 0
-
- When I query statistics ixfr_running of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter ixfr_running should be 0
- When I query statistics axfr_running of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter axfr_running should be 0
+ When I query statistics zones of bind10 module Xfrout with cmdctl port 47804
+ The statistics counters are 0 in category .Xfrout.zones except for the following items
+ | item_name | item_value | min_value | max_value |
- | _SERVER_.notifyoutv6 | 5 | | |
++ | _SERVER_.notifyoutv6 | 1 | | |
+ | _SERVER_.xfrrej | | 1 | 3 |
- | example.org..notifyoutv6 | 5 | | |
++ | example.org..notifyoutv6 | 1 | | |
+ | example.org..xfrrej | | 1 | 3 |
+ # Note: The above rejection counters might sometimes be increased
+ # up to 3. See this for details
+ # http://git.bind10.isc.org/~tester/builder/BIND10-lettuce/20120918210000-MacOS/logs/lettuce.out
When I query statistics socket of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter open should be between 0 and 1
- Then the statistics counter openfail should be 0
- Then the statistics counter close should be 0
- Then the statistics counter bindfail should be 0
- Then the statistics counter acceptfail should be 0
- Then the statistics counter accept should be 0
- Then the statistics counter senderr should be 0
- Then the statistics counter recverr should be 0
+ The statistics counters are 0 in category .Xfrout.socket.unixdomain except for the following items
+ | item_name | item_value |
+ | open | 1 |
+ | accept | 1 |
+
+ #
+ # Test4 for Xfrin statistics
+ #
+ # check statistics change
+ #
+
+ # wait until the last stats requesting is finished
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ wait for new bind10 stderr message XFRIN_RECEIVED_COMMAND
+ last bindctl output should not contain "error"
+
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ The statistics counters are 0 in category .Xfrin.zones except for the following items
+ | item_name | item_value |
+ | _SERVER_.soaoutv6 | 1 |
+ | _SERVER_.axfrreqv6 | 1 |
+ | _SERVER_.xfrfail | 1 |
+ | example.org..soaoutv6 | 1 |
+ | example.org..axfrreqv6 | 1 |
+ | example.org..xfrfail | 1 |
+
+ #
+ # Test for Xfr request rejected in IPv4
+ #
+ Scenario: Handle incoming notify (XFR request rejected in IPv4)
+ Given I have bind10 running with configuration xfrin/retransfer_master_v4.conf with cmdctl port 47804 as master
+ And wait for master stderr message BIND10_STARTED_CC
+ And wait for master stderr message CMDCTL_STARTED
+ And wait for master stderr message AUTH_SERVER_STARTED
+ And wait for master stderr message XFROUT_STARTED
+ And wait for master stderr message ZONEMGR_STARTED
+ And wait for master stderr message STATS_STARTING
+
+ And I have bind10 running with configuration xfrin/retransfer_slave_notify_v4.conf
+ And wait for bind10 stderr message BIND10_STARTED_CC
+ And wait for bind10 stderr message CMDCTL_STARTED
+ And wait for bind10 stderr message AUTH_SERVER_STARTED
+ And wait for bind10 stderr message XFRIN_STARTED
+ And wait for bind10 stderr message ZONEMGR_STARTED
+
+ A query for www.example.org to 127.0.0.1:47806 should have rcode NXDOMAIN
+
+ #
+ # Test1 for Xfrout statistics
+ #
+ check initial statistics not containing example.org for Xfrout with cmdctl port 47804
+
+ #
+ # Test2 for Xfrin statistics
+ #
+ check initial statistics not containing example.org for Xfrin
#
# set transfer_acl rejection
Then wait for bind10 stderr message ZONEMGR_RECEIVE_XFRIN_FAILED not ZONEMGR_RECEIVE_XFRIN_SUCCESS
Then wait for master stderr message NOTIFY_OUT_REPLY_RECEIVED
- A query for www.example.org to [::1]:47806 should have rcode NXDOMAIN
+ A query for www.example.org to 127.0.0.1:47806 should have rcode NXDOMAIN
#
- # Test2 for statistics
+ # Test3 for Xfrout statistics
#
- # check for statistics change
+ # check statistics change
#
+ When I query statistics zones of bind10 module Xfrout with cmdctl port 47804
# wait until stats request at least after NOTIFY_OUT_REPLY_RECEIVED
wait for new master stderr message XFROUT_RECEIVED_GETSTATS_COMMAND
+ last bindctl output should not contain "error"
When I query statistics zones of bind10 module Xfrout with cmdctl port 47804
- last bindctl output should not contain "error"
- Then the statistics counter notifyoutv4 for the zone _SERVER_ should be 0
- Then the statistics counter notifyoutv4 for the zone example.org. should be 0
- Then the statistics counter notifyoutv6 for the zone _SERVER_ should be 1
- Then the statistics counter notifyoutv6 for the zone example.org. should be 1
- # The counts of rejection would be between 1 and 2. They are not
- # fixed. It would depend on timing or the platform.
- Then the statistics counter xfrrej for the zone _SERVER_ should be greater than 0
- Then the statistics counter xfrrej for the zone example.org. should be greater than 0
- Then the statistics counter xfrreqdone for the zone _SERVER_ should be 0
- Then the statistics counter xfrreqdone for the zone example.org. should be 0
+ The statistics counters are 0 in category .Xfrout.zones except for the following items
+ | item_name | item_value | min_value | max_value |
- | _SERVER_.notifyoutv4 | 5 | | |
++ | _SERVER_.notifyoutv4 | 1 | | |
+ | _SERVER_.xfrrej | | 1 | 3 |
- | example.org..notifyoutv4 | 5 | | |
++ | example.org..notifyoutv4 | 1 | | |
+ | example.org..xfrrej | | 1 | 3 |
+ # Note: The above rejection counters might sometimes be increased
+ # up to 3. See this for details
+ # http://git.bind10.isc.org/~tester/builder/BIND10-lettuce/20120918210000-MacOS/logs/lettuce.out
When I query statistics socket of bind10 module Xfrout with cmdctl port 47804
- Then the statistics counter open should be 1
- Then the statistics counter openfail should be 0
- Then the statistics counter close should be 0
- Then the statistics counter bindfail should be 0
- Then the statistics counter acceptfail should be 0
- Then the statistics counter accept should be 1
- Then the statistics counter senderr should be 0
- Then the statistics counter recverr should be 0
+ The statistics counters are 0 in category .Xfrout.socket.unixdomain except for the following items
+ | item_name | item_value |
+ | open | 1 |
+ | accept | 1 |
+
+ #
+ # Test4 for Xfrin statistics
+ #
+ # check statistics change
+ #
+
+ # wait until the last stats requesting is finished
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ wait for new bind10 stderr message XFRIN_RECEIVED_COMMAND
+ last bindctl output should not contain "error"
+
+ When I query statistics zones of bind10 module Xfrin with cmdctl
+ The statistics counters are 0 in category .Xfrin.zones except for the following items
+ | item_name | item_value |
+ | _SERVER_.soaoutv4 | 1 |
+ | _SERVER_.axfrreqv4 | 1 |
+ | _SERVER_.xfrfail | 1 |
+ | example.org..soaoutv4 | 1 |
+ | example.org..axfrreqv4 | 1 |
+ | example.org..xfrfail | 1 |
#
# Test for unreachable slave
projects / thirdparty / kea.git / commitdiff
