#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/of.h>
-#include <linux/of_irq.h>
#include <linux/regulator/consumer.h>
#include <linux/of_platform.h>
#include <linux/err.h>
-#include <linux/input.h>
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
-#define ADC_V1_TSC(x) ((x) + 0x04)
#define ADC_V1_DLY(x) ((x) + 0x08)
#define ADC_V1_DATX(x) ((x) + 0x0C)
#define ADC_V1_DATY(x) ((x) + 0x10)
#define ADC_V1_UPDN(x) ((x) + 0x14)
#define ADC_V1_INTCLR(x) ((x) + 0x18)
#define ADC_V1_MUX(x) ((x) + 0x1c)
-#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20)
/* Future ADC_V2 registers definitions */
#define ADC_V2_CON1(x) ((x) + 0x00)
/* Bit definitions for S3C2410 / S3C6410 ADC */
#define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
-/* touch screen always uses channel 0 */
-#define ADC_S3C2410_MUX_TS 0
-
/* ADCTSC Register Bits */
#define ADC_S3C2443_TSC_UD_SEN (1u << 8)
#define ADC_S3C2410_TSC_YM_SEN (1u << 7)
#define ADC_S3C2410_TSC_YP_SEN (1u << 6)
#define ADC_S3C2410_TSC_XM_SEN (1u << 5)
#define ADC_S3C2410_TSC_XP_SEN (1u << 4)
-#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3)
-#define ADC_S3C2410_TSC_AUTO_PST (1u << 2)
#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0)
#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
ADC_S3C2410_TSC_XP_SEN | \
ADC_S3C2410_TSC_XY_PST(3))
-#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \
- ADC_S3C2410_TSC_YP_SEN | \
- ADC_S3C2410_TSC_XP_SEN | \
- ADC_S3C2410_TSC_AUTO_PST | \
- ADC_S3C2410_TSC_XY_PST(0))
-
/* Bit definitions for ADC_V2 */
#define ADC_V2_CON1_SOFT_RESET (1u << 2)
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
- struct input_dev *input;
void __iomem *regs;
struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
- unsigned int tsirq;
unsigned int delay;
struct regulator *vdd;
u32 value;
unsigned int version;
- bool ts_enabled;
-
- bool read_ts;
- u32 ts_x;
- u32 ts_y;
-
/*
* Lock to protect from potential concurrent access to the
* completion callback during a manual conversion. For this driver
return ret;
}
-static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
-{
- struct exynos_adc *info = iio_priv(indio_dev);
- unsigned long time_left;
- int ret;
-
- mutex_lock(&info->lock);
- info->read_ts = true;
-
- reinit_completion(&info->completion);
-
- writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
- ADC_V1_TSC(info->regs));
-
- /* Select the ts channel to be used and Trigger conversion */
- info->data->start_conv(info, ADC_S3C2410_MUX_TS);
-
- time_left = wait_for_completion_timeout(&info->completion,
- EXYNOS_ADC_TIMEOUT);
- if (time_left == 0) {
- dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
- if (info->data->init_hw)
- info->data->init_hw(info);
- ret = -ETIMEDOUT;
- } else {
- *x = info->ts_x;
- *y = info->ts_y;
- ret = 0;
- }
-
- info->read_ts = false;
- mutex_unlock(&info->lock);
-
- return ret;
-}
-
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
{
struct exynos_adc *info = dev_id;
u32 mask = info->data->mask;
/* Read value */
- if (info->read_ts) {
- info->ts_x = readl(ADC_V1_DATX(info->regs));
- info->ts_y = readl(ADC_V1_DATY(info->regs));
- writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
- } else {
- info->value = readl(ADC_V1_DATX(info->regs)) & mask;
- }
+ info->value = readl(ADC_V1_DATX(info->regs)) & mask;
/* clear irq */
if (info->data->clear_irq)
return IRQ_HANDLED;
}
-/*
- * Here we (ab)use a threaded interrupt handler to stay running
- * for as long as the touchscreen remains pressed, we report
- * a new event with the latest data and then sleep until the
- * next timer tick. This mirrors the behavior of the old
- * driver, with much less code.
- */
-static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
-{
- struct exynos_adc *info = dev_id;
- struct iio_dev *dev = dev_get_drvdata(info->dev);
- u32 x, y;
- bool pressed;
- int ret;
-
- while (READ_ONCE(info->ts_enabled)) {
- ret = exynos_read_s3c64xx_ts(dev, &x, &y);
- if (ret == -ETIMEDOUT)
- break;
-
- pressed = x & y & ADC_DATX_PRESSED;
- if (!pressed) {
- input_report_key(info->input, BTN_TOUCH, 0);
- input_sync(info->input);
- break;
- }
-
- input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
- input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
- input_report_key(info->input, BTN_TOUCH, 1);
- input_sync(info->input);
-
- usleep_range(1000, 1100);
- }
-
- writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
-
- return IRQ_HANDLED;
-}
-
static int exynos_adc_reg_access(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval)
return 0;
}
-static int exynos_adc_ts_open(struct input_dev *dev)
-{
- struct exynos_adc *info = input_get_drvdata(dev);
-
- WRITE_ONCE(info->ts_enabled, true);
- enable_irq(info->tsirq);
-
- return 0;
-}
-
-static void exynos_adc_ts_close(struct input_dev *dev)
-{
- struct exynos_adc *info = input_get_drvdata(dev);
-
- WRITE_ONCE(info->ts_enabled, false);
- disable_irq(info->tsirq);
-}
-
-static int exynos_adc_ts_init(struct exynos_adc *info)
-{
- int ret;
-
- if (info->tsirq <= 0)
- return -ENODEV;
-
- info->input = input_allocate_device();
- if (!info->input)
- return -ENOMEM;
-
- info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
- input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
- input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
-
- info->input->name = "S3C24xx TouchScreen";
- info->input->id.bustype = BUS_HOST;
- info->input->open = exynos_adc_ts_open;
- info->input->close = exynos_adc_ts_close;
-
- input_set_drvdata(info->input, info);
-
- ret = input_register_device(info->input);
- if (ret) {
- input_free_device(info->input);
- return ret;
- }
-
- ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "touchscreen", info);
- if (ret)
- input_unregister_device(info->input);
-
- return ret;
-}
-
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
struct device_node *np = pdev->dev.of_node;
struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = NULL;
- bool has_ts = false;
int ret;
int irq;
}
}
- /* leave out any TS related code if unreachable */
- if (IS_REACHABLE(CONFIG_INPUT)) {
- has_ts = of_property_read_bool(pdev->dev.of_node,
- "has-touchscreen") || pdata;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
info->irq = irq;
-
- if (has_ts) {
- irq = platform_get_irq(pdev, 1);
- if (irq == -EPROBE_DEFER)
- return irq;
-
- info->tsirq = irq;
- } else {
- info->tsirq = -1;
- }
-
info->dev = &pdev->dev;
init_completion(&info->completion);
else
info->delay = 10000;
- if (has_ts)
- ret = exynos_adc_ts_init(info);
- if (ret)
- goto err_iio;
-
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
err_of_populate:
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
- if (has_ts) {
- input_unregister_device(info->input);
- free_irq(info->tsirq, info);
- }
-err_iio:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
- if (IS_REACHABLE(CONFIG_INPUT) && info->input) {
- free_irq(info->tsirq, info);
- input_unregister_device(info->input);
- }
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
iio_device_unregister(indio_dev);
projects / thirdparty / kernel / stable.git / commitdiff
