phy: cadence: cdns-dphy: Update calibration wait time for startup state machine

[ Upstream commit 2c27aaee934a1b5229152fe33a14f1fdf50da143 ]

Do read-modify-write so that we re-use the characterized reset value as
specified in TRM [1] to program calibration wait time which defines number
of cycles to wait for after startup state machine is in bandgap enable
state.

This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's
AM62L and J721E SoC since earlier calibration wait time was getting
overwritten to zero value thus failing the PLL to lockup and causing
timeout.

[1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2):
Link: https://www.ti.com/lit/pdf/spruj83
Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index a5d6d870034232a40db2472859b734003078845c..8d93a830ab8bffbf7a2b1e54a89adfe91e00db05 100644 (file)
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -30,6 +30,7 @@
 
 #define DPHY_CMN_SSM                   DPHY_PMA_CMN(0x20)
 #define DPHY_CMN_SSM_EN                        BIT(0)
+#define DPHY_CMN_SSM_CAL_WAIT_TIME     GENMASK(8, 1)
 #define DPHY_CMN_TX_MODE_EN            BIT(9)
 
 #define DPHY_CMN_PWM                   DPHY_PMA_CMN(0x40)
@@ -421,7 +422,8 @@ static int cdns_dphy_power_on(struct phy *phy)
        writel(reg, dphy->regs + DPHY_BAND_CFG);
 
        /* Start TX state machine. */
-       writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
+       reg = readl(dphy->regs + DPHY_CMN_SSM);
+       writel((reg & DPHY_CMN_SSM_CAL_WAIT_TIME) | DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
               dphy->regs + DPHY_CMN_SSM);
 
        ret = cdns_dphy_wait_for_pll_lock(dphy);