[3422] Enable verbose mode for Kea servers when configured.

diff --git a/src/bin/keactrl/keactrl.in b/src/bin/keactrl/keactrl.in
index c782791a0c05e61aebe8c91904e8711c7786fbe5..a756bcda29408e3d5d03c5b5c7e9c08c59ecf04e 100644 (file)
--- a/src/bin/keactrl/keactrl.in
+++ b/src/bin/keactrl/keactrl.in
@@ -172,6 +172,10 @@ case ${command} in
     start)
         args="-c ${kea_config_file}"
 
+        if [ ${kea_verbose} == "yes" ]; then
+            args="${args} -v"
+        fi
+
         if [ ${kea4} == "yes" ]; then
             start_server ${dhcpv4_srv} "${args}"
         fi

diff --git a/src/bin/keactrl/tests/keactrl_tests.sh.in b/src/bin/keactrl/tests/keactrl_tests.sh.in
index 22678871fc0928b8a77aa5f3318ac046b3932fef..882a53575a9ec650b6f68cf659ee4dcb5d3f2ba3 100644 (file)
--- a/src/bin/keactrl/tests/keactrl_tests.sh.in
+++ b/src/bin/keactrl/tests/keactrl_tests.sh.in
@@ -70,12 +70,12 @@ config="{
 
 # This test checks that both DHCPv4 and DHCPv6 server can be started and
 # shut down.
-start_both_servers_test() {
+start_both_servers_no_verbose_test() {
     # Create configuration file for keactrl. This configuration enables
     # both DHCPv4 and DHCPv6 server.
-    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=yes\n"
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=yes\nkea_verbose=no\n"
 
-    test_start "keactrl.start_both_servers_test"
+    test_start "keactrl.start_both_servers_no_verbose_test"
 
     # Create configuration file for Kea and for keactrl.
     create_config "${config}"
@@ -102,6 +102,105 @@ Expected wait_for_message return %d, returned %d."
         "Timeout waiting for ${kea4_name} to start. \
 Expected wait_for_message return %d, returned %d."
 
+    # Make sure that debug messages are not logged (non-verbose mode).
+    get_log_messages "DHCP6_START_INFO"
+    assert_eq 0 ${_GET_LOG_MESSAGES} \
+        "Expected get_log_messages return %d, returned %d."
+
+    # Make sure that debug messages are not logged (non-verbose mode).
+    get_log_messages "DHCP4_START_INFO"
+    assert_eq 0 ${_GET_LOG_MESSAGES} \
+        "Expected get_log_messages return %d, returned %d."
+
+    # Server may shut down imediatelly after configuration has competed.
+    # Give it some time to shutdown.
+    sleep 3
+
+    # Make sure that both servers are running.
+    get_pids ${kea4_name}
+    assert_eq 1 ${_GET_PIDS_NUM} \
+        "Expected %d ${kea4_name} process running, found %d processes running"
+
+    get_pids ${kea6_name}
+    assert_eq 1 ${_GET_PIDS_NUM} \
+        "Expected %d ${kea6_name} process running, found %d processes running"
+
+    # Use keactrl stop to shutdown the servers.
+    printf "Stopping Kea: ${keactrl} stop\n"
+    ${keactrl} stop
+    ret=${?}
+    assert_eq 0 ${ret} "Expected keactrl to return %d, returned value was %d."
+
+    # Wait up to 10s for the DHCPv6 server to stop.
+    wait_for_message 10 "DHCP6_SHUTDOWN" 1
+    assert_eq 1 ${_WAIT_FOR_MESSAGE} \
+        "Timeout waiting for ${kea6_name} to shutdown. \
+Expected wait_for_message return %d, returned %d."
+
+    # Wait up to 10s for the DHCPv4 server to stop.
+    wait_for_message 10 "DHCP4_SHUTDOWN" 1
+    assert_eq 1 ${_WAIT_FOR_MESSAGE} \
+        "Timeout waiting for ${kea4_name} to shutdown. \
+Expected wait_for_message return %d, returned %d."
+
+    # Make sure that the servers are down.
+    get_pids ${kea4_name}
+    assert_eq 0 ${_GET_PIDS_NUM} \
+        "Expected %d ${kea4_name} processes running, found %d processes running"
+
+    get_pids ${kea6_name}
+    assert_eq 0 ${_GET_PIDS_NUM} \
+        "Expected %d ${kea6_name} processes running, found %d processes running"
+
+    test_finish 0
+}
+
+# This test checks that both DHCPv4 and DHCPv6 server can be started in
+# a verbose mode.
+start_both_servers_verbose_test() {
+    # Create configuration file for keactrl. This configuration enables
+    # both DHCPv4 and DHCPv6 server.
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=yes\nkea_verbose=yes\n"
+
+    test_start "keactrl.start_both_servers_verbose_test"
+
+    # Create configuration file for Kea and for keactrl.
+    create_config "${config}"
+    create_keactrl_config "${keactrl_config}"
+
+    # Set logging to a file.
+    set_logger
+
+    # Start servers using keactrl script.
+    printf "Starting Kea: ${keactrl} start\n"
+    ${keactrl} start
+    ret=${?}
+    assert_eq 0 ${ret} "Expected keactrl to return %d, returned value was %d"
+
+    # Wait up to 20s for the DHCPv6 server to configure.
+    wait_for_message 20 "DHCP6_CONFIG_COMPLETE" 1
+    assert_eq 1 ${_WAIT_FOR_MESSAGE} \
+        "Timeout waiting for ${kea6_name} to start. \
+Expected wait_for_message return %d, returned %d."
+
+    # Wait up to 20s for the DHCPv4 server to configure.
+    wait_for_message 20 "DHCP4_CONFIG_COMPLETE" 1
+    assert_eq 1 ${_WAIT_FOR_MESSAGE} \
+        "Timeout waiting for ${kea4_name} to start. \
+Expected wait_for_message return %d, returned %d."
+
+    # Check if the debug message is present, which should only be the case if
+    # the verbose mode is on.
+    get_log_messages "DHCP6_START_INFO" 1
+    assert_eq 1 ${_GET_LOG_MESSAGES} \
+        "Expected get_log_messages for DHCP6_START_INFO return %d, returned %d."
+
+    # Check if the debug message is present, which should only be the case if
+    # the verbose mode is on.
+    get_log_messages "DHCP4_START_INFO" 1
+    assert_eq 1 ${_GET_LOG_MESSAGES} \
+        "Expected get_log_messages for DHCP4_START_INFO return %d, returned %d."
+
     # Server may shut down imediatelly after configuration has competed.
     # Give it some time to shutdown.
     sleep 3
@@ -142,15 +241,17 @@ Expected wait_for_message return %d, returned %d."
     assert_eq 0 ${_GET_PIDS_NUM} \
         "Expected %d ${kea6_name} processes running, found %d processes running"
 
+
     test_finish 0
 }
 
+
 # This test checks that only DHCPv4 server can be started and that the DHCPv6
 # server is not started.
 start_v4_server_test() {
     # Create configuration file for keactrl. This configuration enables
     # DHCPv4 server but disables DHCPv6 server.
-    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=no\n"
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=no\nkea_verbose=no\n"
 
     test_start "keactrl.start_v4_server_test"
 
@@ -226,7 +327,7 @@ Expected wait_for_message return %d, returned %d."
 start_v6_server_test() {
     # Create configuration file for keactrl. This configuration enables
     # DHCPv6 server but disables DHCPv4 server.
-    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=no\nkea6=yes\n"
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=no\nkea6=yes\nkea_verbose=no\n"
 
     test_start "keactrl.start_v6_server_test"
 
@@ -303,7 +404,7 @@ Expected wait_for_message return %d, returned %d."
 late_start_v4_server_test() {
     # Create configuration file for keactrl. This configuration enables
     # DHCPv6 server but disables DHCPv4 server.
-    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=no\nkea6=yes\n"
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=no\nkea6=yes\nkea_verbose=no\n"
 
     test_start "keactrl.late_start_v4_server_test"
 
@@ -352,7 +453,7 @@ Expected wait_for_message return %d, returned %d."
 Expected wait_for_message to return %d, returned %d."
 
     # Update keactrl config to enable v4 server.
-    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=yes\n"
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=yes\nkea_verbose=yes\n"
     create_keactrl_config "${keactrl_config}"
 
     # Start DHCPv4 server using keactrl script.
@@ -429,7 +530,7 @@ Expected wait_for_message return %d, returned %d."
 late_start_v6_server_test() {
     # Create configuration file for keactrl. This configuration enables
     # DHCPv4 server but disables DHCPv6 server.
-    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=no\n"
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=no\nkea_verbose=yes\n"
 
     test_start "keactrl.late_start_v6_server_test"
 
@@ -478,7 +579,7 @@ Expected wait_for_message return %d, returned %d."
 Expected wait_for_message to return %d, returned %d."
 
     # Update keactrl config to enable v6 server.
-    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=yes\n"
+    keactrl_config="kea_config_file=${CFG_FILE}\nkea4=yes\nkea6=yes\nkea_verbose=no\n"
     create_keactrl_config "${keactrl_config}"
 
     # Start DHCPv6 server using keactrl script.
@@ -549,7 +650,8 @@ Expected wait_for_message return %d, returned %d."
     test_finish 0
 }
 
-start_both_servers_test
+start_both_servers_no_verbose_test
+start_both_servers_verbose_test
 start_v4_server_test
 start_v6_server_test
 late_start_v4_server_test