arm64: dts: qcom: lemans: Add CCI definitions

Qualcomm SA8775P SoC contains 4 Camera Control Interface controllers.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
Link: https://lore.kernel.org/r/20250912-camss_rb8-v6-2-c9a6c3d67392@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 45c81e581af36d0ff5b1816dbb3150d37a757913..7e40f59e4aa3c3452594a1067fc95fc1041c9eb3 100644 (file)
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -4411,6 +4411,162 @@
                        #power-domain-cells = <1>;
                };
 
+               cci0: cci@ac13000 {
+                       compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+                       reg = <0x0 0x0ac13000 0x0 0x1000>;
+
+                       interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+                       power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+                       clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                                <&camcc CAM_CC_CPAS_AHB_CLK>,
+                                <&camcc CAM_CC_CCI_0_CLK>;
+                       clock-names = "camnoc_axi",
+                                     "cpas_ahb",
+                                     "cci";
+
+                       pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+                       pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+                       pinctrl-names = "default", "sleep";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+
+                       cci0_i2c0: i2c-bus@0 {
+                               reg = <0>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+
+                       cci0_i2c1: i2c-bus@1 {
+                               reg = <1>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
+               cci1: cci@ac14000 {
+                       compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+                       reg = <0x0 0x0ac14000 0x0 0x1000>;
+
+                       interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+                       power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+                       clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                                <&camcc CAM_CC_CPAS_AHB_CLK>,
+                                <&camcc CAM_CC_CCI_1_CLK>;
+                       clock-names = "camnoc_axi",
+                                     "cpas_ahb",
+                                     "cci";
+
+                       pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+                       pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+                       pinctrl-names = "default", "sleep";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+
+                       cci1_i2c0: i2c-bus@0 {
+                               reg = <0>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+
+                       cci1_i2c1: i2c-bus@1 {
+                               reg = <1>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
+               cci2: cci@ac15000 {
+                       compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+                       reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+                       interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+                       power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+                       clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                                <&camcc CAM_CC_CPAS_AHB_CLK>,
+                                <&camcc CAM_CC_CCI_2_CLK>;
+                       clock-names = "camnoc_axi",
+                                     "cpas_ahb",
+                                     "cci";
+
+                       pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+                       pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+                       pinctrl-names = "default", "sleep";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+
+                       cci2_i2c0: i2c-bus@0 {
+                               reg = <0>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+
+                       cci2_i2c1: i2c-bus@1 {
+                               reg = <1>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
+               cci3: cci@ac16000 {
+                       compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+                       reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+                       interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
+
+                       power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+                       clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                                <&camcc CAM_CC_CPAS_AHB_CLK>,
+                                <&camcc CAM_CC_CCI_3_CLK>;
+                       clock-names = "camnoc_axi",
+                                     "cpas_ahb",
+                                     "cci";
+
+                       pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+                       pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+                       pinctrl-names = "default", "sleep";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+
+                       cci3_i2c0: i2c-bus@0 {
+                               reg = <0>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+
+                       cci3_i2c1: i2c-bus@1 {
+                               reg = <1>;
+                               clock-frequency = <1000000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
                camss: isp@ac78000 {
                        compatible = "qcom,sa8775p-camss";
 
@@ -5268,6 +5424,118 @@
                                bias-disable;
                        };
 
+                       cci0_0_default: cci0-0-default-state {
+                               pins = "gpio60", "gpio61";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci0_0_sleep: cci0-0-sleep-state {
+                               pins = "gpio60", "gpio61";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
+                       cci0_1_default: cci0-1-default-state {
+                               pins = "gpio52", "gpio53";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci0_1_sleep: cci0-1-sleep-state {
+                               pins = "gpio52", "gpio53";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
+                       cci1_0_default: cci1-0-default-state {
+                               pins = "gpio62", "gpio63";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci1_0_sleep: cci1-0-sleep-state {
+                               pins = "gpio62", "gpio63";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
+                       cci1_1_default: cci1-1-default-state {
+                               pins = "gpio54", "gpio55";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci1_1_sleep: cci1-1-sleep-state {
+                               pins = "gpio54", "gpio55";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
+                       cci2_0_default: cci2-0-default-state {
+                               pins = "gpio64", "gpio65";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci2_0_sleep: cci2-0-sleep-state {
+                               pins = "gpio64", "gpio65";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
+                       cci2_1_default: cci2-1-default-state {
+                               pins = "gpio56", "gpio57";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci2_1_sleep: cci2-1-sleep-state {
+                               pins = "gpio56", "gpio57";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
+                       cci3_0_default: cci3-0-default-state {
+                               pins = "gpio66", "gpio67";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci3_0_sleep: cci3-0-sleep-state {
+                               pins = "gpio66", "gpio67";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
+                       cci3_1_default: cci3-1-default-state {
+                               pins = "gpio58", "gpio59";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-up = <2200>;
+                       };
+
+                       cci3_1_sleep: cci3-1-sleep-state {
+                               pins = "gpio58", "gpio59";
+                               function = "cci_i2c";
+                               drive-strength = <2>;
+                               bias-pull-down;
+                       };
+
                        qup_i2c0_default: qup-i2c0-state {
                                pins = "gpio20", "gpio21";
                                function = "qup0_se0";