]> git.ipfire.org Git - thirdparty/glibc.git/commitdiff
(pthread_cond_timedwait_relative_old): Get remaining time from nanosleep call
authorUlrich Drepper <drepper@redhat.com>
Sat, 29 Jan 2000 11:50:18 +0000 (11:50 +0000)
committerUlrich Drepper <drepper@redhat.com>
Sat, 29 Jan 2000 11:50:18 +0000 (11:50 +0000)
so that in case we restart we only wait for the remaining time.
(pthread_cond_timedwait_relative_new): Likewise.

linuxthreads/condvar.c

index 8cc1e94cc7d73d5b037a00c2b12577211a179d6c..aab3ff257b20df76d4fdaeefb16fc6522c3cc173 100644 (file)
 #include "restart.h"
 
 static int pthread_cond_timedwait_relative_old(pthread_cond_t *,
-    pthread_mutex_t *, const struct timespec *);
+    pthread_mutex_t *, struct timespec *);
 
 static int pthread_cond_timedwait_relative_new(pthread_cond_t *,
-    pthread_mutex_t *, const struct timespec *);
+    pthread_mutex_t *, struct timespec *);
 
 static int (*pthread_cond_tw_rel)(pthread_cond_t *, pthread_mutex_t *,
-    const struct timespec *) = pthread_cond_timedwait_relative_old;
+    struct timespec *) = pthread_cond_timedwait_relative_old;
 
 /* initialize this module */
 void __pthread_init_condvar(int rt_sig_available)
@@ -82,7 +82,7 @@ int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex)
   extr.pu_extricate_func = cond_extricate_func;
 
   /* Register extrication interface */
-  __pthread_set_own_extricate_if(self, &extr); 
+  __pthread_set_own_extricate_if(self, &extr);
 
   /* Atomically enqueue thread for waiting, but only if it is not
      canceled. If the thread is canceled, then it will fall through the
@@ -100,14 +100,14 @@ int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex)
   __pthread_unlock(&cond->__c_lock);
 
   if (already_canceled) {
-    __pthread_set_own_extricate_if(self, 0); 
+    __pthread_set_own_extricate_if(self, 0);
     pthread_exit(PTHREAD_CANCELED);
   }
 
   pthread_mutex_unlock(mutex);
 
   suspend(self);
-  __pthread_set_own_extricate_if(self, 0); 
+  __pthread_set_own_extricate_if(self, 0);
 
   /* Check for cancellation again, to provide correct cancellation
      point behavior */
@@ -126,11 +126,11 @@ int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex)
 /* The following function is used on kernels that don't have rt signals.
    SIGUSR1 is used as the restart signal. The different code is needed
    because that ordinary signal does not queue. */
-   
+
 static int
 pthread_cond_timedwait_relative_old(pthread_cond_t *cond,
                                pthread_mutex_t *mutex,
-                               const struct timespec * reltime)
+                               struct timespec * reltime)
 {
   volatile pthread_descr self = thread_self();
   sigset_t unblock, initial_mask;
@@ -149,7 +149,7 @@ requeue_and_wait_again:
   extr.pu_extricate_func = cond_extricate_func;
 
   /* Register extrication interface */
-  __pthread_set_own_extricate_if(self, &extr); 
+  __pthread_set_own_extricate_if(self, &extr);
 
   /* Enqueue to wait on the condition and check for cancellation. */
   __pthread_lock(&cond->__c_lock, self);
@@ -161,7 +161,7 @@ requeue_and_wait_again:
   __pthread_unlock(&cond->__c_lock);
 
   if (already_canceled) {
-    __pthread_set_own_extricate_if(self, 0); 
+    __pthread_set_own_extricate_if(self, 0);
     pthread_exit(PTHREAD_CANCELED);
   }
 
@@ -179,7 +179,7 @@ requeue_and_wait_again:
       sigaddset(&unblock, __pthread_sig_restart);
       sigprocmask(SIG_UNBLOCK, &unblock, &initial_mask);
       /* Sleep for the required duration */
-      retsleep = __libc_nanosleep(reltime, NULL);
+      retsleep = __libc_nanosleep(reltime, reltime);
       /* Block the restart signal again */
       sigprocmask(SIG_SETMASK, &initial_mask, NULL);
       was_signalled = 0;
@@ -191,7 +191,7 @@ requeue_and_wait_again:
   }
 
   /* Now was_signalled is true if we exited the above code
-     due to the delivery of a restart signal.  In that case, 
+     due to the delivery of a restart signal.  In that case,
      we know we have been dequeued and resumed and that the
      resume count is balanced.  Otherwise, there are some
      cases to consider. First, try to bump up the resume count
@@ -214,13 +214,13 @@ requeue_and_wait_again:
       __pthread_unlock(&cond->__c_lock);
 
       if (was_on_queue) {
-       __pthread_set_own_extricate_if(self, 0); 
+       __pthread_set_own_extricate_if(self, 0);
        pthread_mutex_lock(mutex);
 
        if (retsleep == 0)
          return ETIMEDOUT;
-       /* Woken by a signal: resume waiting as
-          required by Single Unix Specification. */
+       /* Woken by a signal: resume waiting as required by Single Unix
+          Specification.  */
        goto requeue_and_wait_again;
       }
 
@@ -228,11 +228,11 @@ requeue_and_wait_again:
     }
   }
 
-  __pthread_set_own_extricate_if(self, 0); 
+  __pthread_set_own_extricate_if(self, 0);
 
   /* The remaining logic is the same as in other cancellable waits,
      such as pthread_join sem_wait or pthread_cond wait. */
+
   if (THREAD_GETMEM(self, p_woken_by_cancel)
       && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
     THREAD_SETMEM(self, p_woken_by_cancel, 0);
@@ -250,7 +250,7 @@ requeue_and_wait_again:
 static int
 pthread_cond_timedwait_relative_new(pthread_cond_t *cond,
                                pthread_mutex_t *mutex,
-                               const struct timespec * reltime)
+                               struct timespec * reltime)
 {
   volatile pthread_descr self = thread_self();
   sigset_t unblock, initial_mask;
@@ -258,7 +258,7 @@ pthread_cond_timedwait_relative_new(pthread_cond_t *cond,
   sigjmp_buf jmpbuf;
   pthread_extricate_if extr;
 
-requeue_and_wait_again:
+ requeue_and_wait_again:
 
   retsleep = 0;
   already_canceled = 0;
@@ -269,7 +269,7 @@ requeue_and_wait_again:
   extr.pu_extricate_func = cond_extricate_func;
 
   /* Register extrication interface */
-  __pthread_set_own_extricate_if(self, &extr); 
+  __pthread_set_own_extricate_if(self, &extr);
 
   /* Enqueue to wait on the condition and check for cancellation. */
   __pthread_lock(&cond->__c_lock, self);
@@ -281,7 +281,7 @@ requeue_and_wait_again:
   __pthread_unlock(&cond->__c_lock);
 
   if (already_canceled) {
-    __pthread_set_own_extricate_if(self, 0); 
+    __pthread_set_own_extricate_if(self, 0);
     pthread_exit(PTHREAD_CANCELED);
   }
 
@@ -298,7 +298,7 @@ requeue_and_wait_again:
     sigaddset(&unblock, __pthread_sig_restart);
     sigprocmask(SIG_UNBLOCK, &unblock, &initial_mask);
     /* Sleep for the required duration */
-    retsleep = __libc_nanosleep(reltime, NULL);
+    retsleep = __libc_nanosleep(reltime, reltime);
     /* Block the restart signal again */
     sigprocmask(SIG_SETMASK, &initial_mask, NULL);
     was_signalled = 0;
@@ -309,7 +309,7 @@ requeue_and_wait_again:
   THREAD_SETMEM(self, p_signal_jmp, NULL);
 
   /* Now was_signalled is true if we exited the above code
-     due to the delivery of a restart signal.  In that case, 
+     due to the delivery of a restart signal.  In that case,
      everything is cool. We have been removed from the queue
      by the other thread, and consumed its signal.
 
@@ -322,7 +322,7 @@ requeue_and_wait_again:
   if (!was_signalled) {
     int was_on_queue;
 
-    /* __pthread_lock will queue back any spurious restarts that 
+    /* __pthread_lock will queue back any spurious restarts that
        may happen to it. */
 
     __pthread_lock(&cond->__c_lock, self);
@@ -330,13 +330,13 @@ requeue_and_wait_again:
     __pthread_unlock(&cond->__c_lock);
 
     if (was_on_queue) {
-      __pthread_set_own_extricate_if(self, 0); 
+      __pthread_set_own_extricate_if(self, 0);
       pthread_mutex_lock(mutex);
 
       if (retsleep == 0)
        return ETIMEDOUT;
-      /* Woken by a signal: resume waiting as
-        required by Single Unix Specification. */
+      /* Woken by a signal: resume waiting as required by Single Unix
+        Specification.  */
       goto requeue_and_wait_again;
     }
 
@@ -344,11 +344,11 @@ requeue_and_wait_again:
     suspend(self);
   }
 
-  __pthread_set_own_extricate_if(self, 0); 
+  __pthread_set_own_extricate_if(self, 0);
 
   /* The remaining logic is the same as in other cancellable waits,
      such as pthread_join sem_wait or pthread_cond wait. */
+
   if (THREAD_GETMEM(self, p_woken_by_cancel)
       && THREAD_GETMEM(self, p_cancelstate) == PTHREAD_CANCEL_ENABLE) {
     THREAD_SETMEM(self, p_woken_by_cancel, 0);