--- /dev/null
+From 4b5060ddae2b03c5387321fafc089d242225697a Mon Sep 17 00:00:00 2001
+From: NeilBrown <neilb@suse.de>
+Date: Tue, 9 Sep 2014 14:13:51 +1000
+Subject: md/bitmap: always wait for writes on unplug.
+
+From: NeilBrown <neilb@suse.de>
+
+commit 4b5060ddae2b03c5387321fafc089d242225697a upstream.
+
+If two threads call bitmap_unplug at the same time, then
+one might schedule all the writes, and the other might
+decide that it doesn't need to wait. But really it does.
+
+It rarely hurts to wait when it isn't absolutely necessary,
+and the current code doesn't really focus on 'absolutely necessary'
+anyway. So just wait always.
+
+This can potentially lead to data corruption if a crash happens
+at an awkward time and data was written before the bitmap was
+updated. It is very unlikely, but this should go to -stable
+just to be safe. Appropriate for any -stable.
+
+Signed-off-by: NeilBrown <neilb@suse.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/md/bitmap.c | 16 ++++++----------
+ 1 file changed, 6 insertions(+), 10 deletions(-)
+
+--- a/drivers/md/bitmap.c
++++ b/drivers/md/bitmap.c
+@@ -879,7 +879,6 @@ void bitmap_unplug(struct bitmap *bitmap
+ {
+ unsigned long i;
+ int dirty, need_write;
+- int wait = 0;
+
+ if (!bitmap || !bitmap->storage.filemap ||
+ test_bit(BITMAP_STALE, &bitmap->flags))
+@@ -897,16 +896,13 @@ void bitmap_unplug(struct bitmap *bitmap
+ clear_page_attr(bitmap, i, BITMAP_PAGE_PENDING);
+ write_page(bitmap, bitmap->storage.filemap[i], 0);
+ }
+- if (dirty)
+- wait = 1;
+- }
+- if (wait) { /* if any writes were performed, we need to wait on them */
+- if (bitmap->storage.file)
+- wait_event(bitmap->write_wait,
+- atomic_read(&bitmap->pending_writes)==0);
+- else
+- md_super_wait(bitmap->mddev);
+ }
++ if (bitmap->storage.file)
++ wait_event(bitmap->write_wait,
++ atomic_read(&bitmap->pending_writes)==0);
++ else
++ md_super_wait(bitmap->mddev);
++
+ if (test_bit(BITMAP_WRITE_ERROR, &bitmap->flags))
+ bitmap_file_kick(bitmap);
+ }
--- /dev/null
+From 1a5fb99de4850cba710d91becfa2c65653048589 Mon Sep 17 00:00:00 2001
+From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Date: Fri, 24 Oct 2014 21:19:57 +0400
+Subject: mfd: tc6393xb: Fail ohci suspend if full state restore is required
+
+From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+
+commit 1a5fb99de4850cba710d91becfa2c65653048589 upstream.
+
+Some boards with TC6393XB chip require full state restore during system
+resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000
+tosa is one of them). Failing to do so would result in ohci Oops on
+resume due to internal memory contentes being changed. Fail ohci suspend
+on tc6393xb is full state restore is required.
+
+Recommended workaround is to unbind tmio-ohci driver before suspend and
+rebind it after resume.
+
+Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Signed-off-by: Lee Jones <lee.jones@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mfd/tc6393xb.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+--- a/drivers/mfd/tc6393xb.c
++++ b/drivers/mfd/tc6393xb.c
+@@ -263,6 +263,17 @@ static int tc6393xb_ohci_disable(struct
+ return 0;
+ }
+
++static int tc6393xb_ohci_suspend(struct platform_device *dev)
++{
++ struct tc6393xb_platform_data *tcpd = dev_get_platdata(dev->dev.parent);
++
++ /* We can't properly store/restore OHCI state, so fail here */
++ if (tcpd->resume_restore)
++ return -EBUSY;
++
++ return tc6393xb_ohci_disable(dev);
++}
++
+ static int tc6393xb_fb_enable(struct platform_device *dev)
+ {
+ struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent);
+@@ -403,7 +414,7 @@ static struct mfd_cell tc6393xb_cells[]
+ .num_resources = ARRAY_SIZE(tc6393xb_ohci_resources),
+ .resources = tc6393xb_ohci_resources,
+ .enable = tc6393xb_ohci_enable,
+- .suspend = tc6393xb_ohci_disable,
++ .suspend = tc6393xb_ohci_suspend,
+ .resume = tc6393xb_ohci_enable,
+ .disable = tc6393xb_ohci_disable,
+ },
--- /dev/null
+From 1b9b46d05f887aec418b3a5f4f55abf79316fcda Mon Sep 17 00:00:00 2001
+From: Tony Lindgren <tony@atomide.com>
+Date: Sun, 2 Nov 2014 10:09:38 -0800
+Subject: mfd: twl4030-power: Fix regression with missing compatible flag
+
+From: Tony Lindgren <tony@atomide.com>
+
+commit 1b9b46d05f887aec418b3a5f4f55abf79316fcda upstream.
+
+Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset
+configuration") accidentally removed the compatible flag for
+"ti,twl4030-power" that should be there as documented in the
+binding.
+
+If "ti,twl4030-power" only the poweroff configuration is done
+by the driver.
+
+Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration")
+Reported-by: "Dr. H. Nikolaus Schaller" <hns@goldelico.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Lee Jones <lee.jones@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mfd/twl4030-power.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/mfd/twl4030-power.c
++++ b/drivers/mfd/twl4030-power.c
+@@ -828,6 +828,9 @@ static struct twl4030_power_data osc_off
+
+ static struct of_device_id twl4030_power_of_match[] = {
+ {
++ .compatible = "ti,twl4030-power",
++ },
++ {
+ .compatible = "ti,twl4030-power-reset",
+ .data = &omap3_reset,
+ },
--- /dev/null
+From 0031a98a85e9fca282624bfc887f9531b2768396 Mon Sep 17 00:00:00 2001
+From: Baruch Siach <baruch@tkos.co.il>
+Date: Mon, 22 Sep 2014 10:12:51 +0300
+Subject: mmc: block: add newline to sysfs display of force_ro
+
+From: Baruch Siach <baruch@tkos.co.il>
+
+commit 0031a98a85e9fca282624bfc887f9531b2768396 upstream.
+
+Make force_ro consistent with other sysfs entries.
+
+Fixes: 371a689f64b0d ('mmc: MMC boot partitions support')
+Cc: Andrei Warkentin <andrey.warkentin@gmail.com>
+Signed-off-by: Baruch Siach <baruch@tkos.co.il>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mmc/card/block.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -260,7 +260,7 @@ static ssize_t force_ro_show(struct devi
+ int ret;
+ struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
+
+- ret = snprintf(buf, PAGE_SIZE, "%d",
++ ret = snprintf(buf, PAGE_SIZE, "%d\n",
+ get_disk_ro(dev_to_disk(dev)) ^
+ md->read_only);
+ mmc_blk_put(md);
--- /dev/null
+From 66dfd10173159cafa9cb0d39936b8daeaab8e3e0 Mon Sep 17 00:00:00 2001
+From: James Hogan <james.hogan@imgtec.com>
+Date: Mon, 17 Nov 2014 17:49:05 +0000
+Subject: mmc: dw_mmc: avoid write to CDTHRCTL on older versions
+
+From: James Hogan <james.hogan@imgtec.com>
+
+commit 66dfd10173159cafa9cb0d39936b8daeaab8e3e0 upstream.
+
+Commit f1d2736c8156 (mmc: dw_mmc: control card read threshold) added
+dw_mci_ctrl_rd_thld() with an unconditional write to the CDTHRCTL
+register at offset 0x100. However before version 240a, the FIFO region
+started at 0x100, so the write messes with the FIFO and completely
+breaks the driver.
+
+If the version id < 240A, return early from dw_mci_ctl_rd_thld() so as
+not to hit this problem.
+
+Fixes: f1d2736c8156 (mmc: dw_mmc: control card read threshold)
+Signed-off-by: James Hogan <james.hogan@imgtec.com>
+Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mmc/host/dw_mmc.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/mmc/host/dw_mmc.c
++++ b/drivers/mmc/host/dw_mmc.c
+@@ -624,6 +624,13 @@ static void dw_mci_ctrl_rd_thld(struct d
+
+ WARN_ON(!(data->flags & MMC_DATA_READ));
+
++ /*
++ * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
++ * in the FIFO region, so we really shouldn't access it).
++ */
++ if (host->verid < DW_MMC_240A)
++ return;
++
+ if (host->timing != MMC_TIMING_MMC_HS200 &&
+ host->timing != MMC_TIMING_UHS_SDR104)
+ goto disable;
--- /dev/null
+From 903101a83949d6fc77c092cef07e9c1e10c07e46 Mon Sep 17 00:00:00 2001
+From: Ulf Hansson <ulf.hansson@linaro.org>
+Date: Tue, 25 Nov 2014 13:05:13 +0100
+Subject: mmc: omap_hsmmc: Fix UHS card with DDR50 support
+
+From: Ulf Hansson <ulf.hansson@linaro.org>
+
+commit 903101a83949d6fc77c092cef07e9c1e10c07e46 upstream.
+
+The commit, mmc: omap: clarify DDR timing mode between SD-UHS and eMMC,
+switched omap_hsmmc to support MMC DDR mode instead of UHS DDR50 mode.
+
+Add UHS DDR50 mode again and this time let's also keep the MMC DDR mode.
+
+Fixes: 5438ad95a57c (mmc: omap: clarify DDR timing mode between SD-UHS and eMMC)
+Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mmc/host/omap_hsmmc.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/mmc/host/omap_hsmmc.c
++++ b/drivers/mmc/host/omap_hsmmc.c
+@@ -609,6 +609,7 @@ static void omap_hsmmc_set_clock(struct
+ */
+ if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
+ (ios->timing != MMC_TIMING_MMC_DDR52) &&
++ (ios->timing != MMC_TIMING_UHS_DDR50) &&
+ ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
+ regval = OMAP_HSMMC_READ(host->base, HCTL);
+ if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
+@@ -628,7 +629,8 @@ static void omap_hsmmc_set_bus_width(str
+ u32 con;
+
+ con = OMAP_HSMMC_READ(host->base, CON);
+- if (ios->timing == MMC_TIMING_MMC_DDR52)
++ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
++ ios->timing == MMC_TIMING_UHS_DDR50)
+ con |= DDR; /* configure in DDR mode */
+ else
+ con &= ~DDR;
--- /dev/null
+From 6380ea099cdd46d7377b6fbec0291cf2aa387bad Mon Sep 17 00:00:00 2001
+From: Peter Guo <peter.guo@bayhubtech.com>
+Date: Wed, 24 Sep 2014 04:29:04 +0200
+Subject: mmc: sdhci-pci-o2micro: Fix Dell E5440 issue
+
+From: Peter Guo <peter.guo@bayhubtech.com>
+
+commit 6380ea099cdd46d7377b6fbec0291cf2aa387bad upstream.
+
+Fix Dell E5440 when reboot Linux, can't find o2micro sd host chip issue.
+
+Fixes: 01acf6917aed (mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts)
+Signed-off-by: Peter Guo <peter.guo@bayhubtech.com>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mmc/host/sdhci-pci-o2micro.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/drivers/mmc/host/sdhci-pci-o2micro.c
++++ b/drivers/mmc/host/sdhci-pci-o2micro.c
+@@ -127,8 +127,6 @@ void sdhci_pci_o2_fujin2_pci_init(struct
+ return;
+ scratch_32 &= ~((1 << 21) | (1 << 30));
+
+- /* Set RTD3 function disabled */
+- scratch_32 |= ((1 << 29) | (1 << 28));
+ pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
+
+ /* Set L1 Entrance Timer */
projects / thirdparty / kernel / stable-queue.git / commitdiff
